Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 132 views

    Baykon Tx13 Transmitter Catalogue

    Uploaded by

    Ivailo Zapryanov
    The TX13 load cell transmitter converts load cell signals to analog outputs very fast and accurately, up to 800 conversions per second. Its programmable digital filter minimizes environmental vibration to provide an accurate filtered signal. It has high resolution and low drift, eliminating zero and span changes from temperature fluctuations for stable long-term performance. Analog outputs are selectable as 4-20 mA, 0-20 mA, 0-10 V, or 0-5 V, with additional -10 to +10 V on some models. The transmitter provides two relay cutoff outputs and one digital input for zeroing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Baykon Tx13 Transmitter Catalogue

    Uploaded by

    Ivailo Zapryanov
    132 views2 pages
    The TX13 load cell transmitter converts load cell signals to analog outputs very fast and accurately, up to 800 conversions per second. Its programmable digital filter minimizes environmental vibration to provide an accurate filtered signal. It has high resolution and low drift, eliminating zero and span changes from temperature fluctuations for stable long-term performance. Analog outputs are selectable as 4-20 mA, 0-20 mA, 0-10 V, or 0-5 V, with additional -10 to +10 V on some models. The transmitter provides two relay cutoff outputs and one digital input for zeroing.

    Original Description:

    Manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The TX13 load cell transmitter converts load cell signals to analog outputs very fast and accurately, up to 800 conversions per second. Its programmable digital filter minimizes environmental vibration to provide an accurate filtered signal. It has high resolution and low drift, eliminating zero and span changes from temperature fluctuations for stable long-term performance. Analog outputs are selectable as 4-20 mA, 0-20 mA, 0-10 V, or 0-5 V, with additional -10 to +10 V on some models. The transmitter provides two relay cutoff outputs and one digital input for zeroing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    132 views2 pages

    Baykon Tx13 Transmitter Catalogue

    Uploaded by

    Ivailo Zapryanov
    The TX13 load cell transmitter converts load cell signals to analog outputs very fast and accurately, up to 800 conversions per second. Its programmable digital filter minimizes environmental vibration to provide an accurate filtered signal. It has high resolution and low drift, eliminating zero and span changes from temperature fluctuations for stable long-term performance. Analog outputs are selectable as 4-20 mA, 0-20 mA, 0-10 V, or 0-5 V, with additional -10 to +10 V on some models. The transmitter provides two relay cutoff outputs and one digital input for zeroing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TX13 Load Cell Transmitter

    High speed and precise analogue output

    Fast and Accurate Output


    • Up to 800 conversion per second
    • Programmable adaptive digital filter
    • Up to 16 000 000 internal resolution
    • Up to 60 000 analogue output
    resolution
    • Very low zero and gain drift
    at temperature changes.
    • Very low drift in long term. TX13 analog load cell transmitter converts load cell signal to
    analog output very fast and accurately. Programmable smart
    Analog Output With
    • Bipolar load cell signal filter of TX13 minimizes the environmental vibration to
    input for force measurement produce the best filtered signal to your PLC for your weight and
    • 6 wire load cell connection for force measurement systems. Its high quality analog & digital
    high accuracy
    hardware eliminates zero and span drifts caused by
    • 2 pcs relay contact cutoff
    outputs and one zeroing input temperature changes and provides perfect stability for
    • Bipolar analogue long term unlike traditional analogue transmitters.
    voltage output
    Analogue output is programmable as 4-20 mA, 0-20 mA, 0-10
    Typical Applications
    • Tank and silo weighing
    V, 0-5 V. TX13 MB has additionally -10 to 10 V analog output range.
    • Compressive and tensile tests All instruments are normalized and matched in the production for
    • Force measurement direct replicement when calibration done at the PLC side and to
    • Strength measurement provide highest accuracy for electronic calibration (eCAL).
    • Process control applications
    • Dosing systems 2 cut off outputs can be used for alarm or control valves; one
    digital input can be used for zeroing the scale.
    TX13 Specifications
    Analogue Output
    Analogue output TX13 4-20 mA, 0-20 mA, 0-10 VDC or 0-5 V
    TX13 MB TX13 MB has additionally bipolar -10 to +10 V output.
    D/A convertion 16 bit high resolution and very low drift DAC
    Analogue output resolution Up to 60 000 steps.
    Analogue output update rate Up to 800 conversion per second.
    Load Cell Signal
    Load cell signal range -18 mV to +18 mV.
    Minimum load cell signal range < 0,8 mV
    Linearity < 0.01 %
    Temperature drift < 0.005 % FSR / ºC
    A/D converter 24 bit Delta-Sigma ratiometric with integral analog and digital filters. High EMC immunity.
    Internal resolution Up to 16 000 000 counts.
    Weighing
    Calibration with test weight Performed with rotary switches on the front of instrument or from PC/PLC
    eCal electronic calibration All instruments are matched at the production for high accuracy at electronic calibration via serial port.
    Fast calibration Automatic zero adjustment and span adjustment with load 20% max
    Digital filter 9 step adjustable smart and adaptive filter.
    Zeroing Via serial port or opto isolated digital input.
    Set points 2 programmable free setpoints, Relay contact: 240 VAC, 0.25 A or 30 VDC 0,15 A.
    Load Cells
    Excitation 5 VDC
    Number of load cells Up to 8 units of 350 Ω or 18 units of 1100 Ω
    Connection 4 or 6 wire technique.
    Serial Interface
    RS-232C For setup from PC / PLC or digital weight data output to connect it any other instrument.
    Power
    Power supply TX13 12 - 28 VDC, max. 0.2 A
    TX13 MB 9 - 28 VDC, max. 0.3 A
    Environment and Enclosure
    Enclosure Polyamide, for DIN-rail mount, IP20
    Front panel 3 x status LED, 2 x rotary switches for set up.
    Dimensions Width: 22,5 mm, Height: 99 mm, Depth: 114,5 mm
    Operation temperature Between -15°C and +55°C
    Humidity 85% RH max, non-condensing.

    4 – 20 mA, 0 – 20 mA
    0 – 10 V, 0 – 5 V or -10 to +10 V

    Set point output 1


    RS-232C
    (Specifications are subject to change without notice. 02-08 / 2017)

    Set point output 2


    Zeroing the scale

    Kimya Sanayicileri O.S.B Organik Cad. No:31


    Tepeoren 34956 Tuzla / Istanbul / TURKEY
    +90 216 593 26 30 +90 216 593 26 38
    in fo @ ba yk o n. co m baykon.c om

    You might also like