Verical Pile Capacity Calculation (Static Analysis) As per IS 2911 Part 1 2010

Vertical Pile Capacity Calculation of pile For A-1

Pile Diameter 1200 mm Factor of Safety for Shaft Friction 2.5

As per is. 2911.1.1.2010 cl. 6.8.3
Earth Pressure Coefficient, Ks 1.00 Factor of Safety for Base Resistance 2.5
Max. Eff. Overburden Pressure at pile tip 16.2 t/m2
d/f = 1

Soil skin resistance till 3 m is not considered

Based on IS 6403 Base Resistance, Ppu = Ap * (C.Nc + q.Nq + 0.5.g.B.Ng)
Angle of Eff. Over-
Depth of Angle of Effective
Cohesion, C Shearing burden
Layer from GL Wall Unit wt. of Ppu
(t/m2) Resistance, Pressure at tip Nc Nq Ng C.Nc q.Nq 0.5.g.B.Ng
(m) friction, d soil (t/m3)
f 'qtip' (t/m2) (in tonnes)

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Overburden
0.0 0.0 0.0 0.0 0.00 0.00 9.00 1.00 0.00 0.00 0.00 0.00 0.00
3.0 1.8 0.0 0.0 0.80 2.39 9.00 1.00 0.00 16.20 2.39 0.00 21.02
6.0 1.0 0.0 0.0 0.72 4.31 9.00 1.00 0.00 9.00 4.31 0.00 15.06
9.0 1.0 0.0 0.0 0.73 6.57 9.00 1.00 0.00 9.00 6.57 0.00 17.61
12.0 1.4 0.0 0.0 0.76 9.06 9.00 1.00 0.00 12.60 9.06 0.00 24.50
13.5 1.5 0.0 0.0 0.78 10.56 9.00 1.00 0.00 13.50 10.56 0.00 27.21
15.0 1.2 28.0 28.0 0.96 14.39 9.00 16.03 17.79 10.80 230.59 10.24 284.59
16.5 0.7 28.0 28.0 0.98 16.10 9.00 16.03 17.79 6.30 258.15 10.42 310.87
18.0 1.2 0.0 1.5 0.94 16.20 9.00 1.00 0.00 10.80 16.20 0.00 30.54
19.5 7.8 0.0 2.0 0.94 16.20 9.00 1.00 0.00 70.20 16.20 0.00 97.72
21.0 7.8 0.0 2.0 0.96 16.20 9.00 1.00 0.00 70.20 16.20 0.00 97.72
22.5 7.8 0.0 2.0 0.96 16.20 9.00 1.00 0.00 70.20 16.20 0.00 97.72
24.0 7.8 0.0 2.0 0.96 16.20 9.00 1.00 0.00 70.20 16.20 0.00 97.72
25.5 7.8 0.0 0.0 0.96 16.20 9.00 1.00 0.00 70.20 16.20 0.00 97.72
27.0 7.8 0.0 0.0 0.96 16.20 9.00 1.00 0.00 70.20 16.20 0.00 97.72
28.5 10.8 0.0 0.0 1.01 16.20 9.00 1.00 0.00 97.20 16.20 0.00 128.25
30.0 10.8 0.0 0.0 1.01 16.20 9.00 1.00 0.00 97.20 16.20 0.00 128.25
31.5 10.8 0.0 0.0 0.99 16.20 9.00 1.00 0.00 97.20 16.20 0.00 128.25
33.5 10.8 0.0 0.0 0.99 16.20 9.00 1.00 0.00 97.20 16.20 0.00 128.25
35.0 0.0 32.0 32.0 0.99 16.20 9.00 31.63 32.65 0.00 512.41 19.41 601.48
36.5 0.0 32.0 32.0 0.72 16.20 9.00 31.63 32.65 0.00 512.41 14.11 595.47
38.0 0.0 32.0 32.0 0.45 16.20 9.00 31.63 32.65 0.00 512.41 8.80 589.47
 Verical Pile Capacity Calculation (Static Analysis) As per IS 2911 Part 1 2010

Shaft Friction Psu =( S(Ks.Pdi.Tand).Asi + a.c.As) Total Safe Load Safe Load
Eff. Over- Ult.
Depth of due to due to
burden Pressure Safe Load Pile Length
Layer from GL (Ks.Pdi.Tand). Psu Capacity, Shaft End
(m) at c.g of the Asi (m2) a a.c.As (Tonnes) (meters)
Asi Pu Friction Bearing
layer 'Pdi'
(t/m )
2 (Tonnes) (Tonnes) (Tonnes)

(1) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24)
0.0 0.00 0.00 0.00 1.00 0.00 0.00 0.0 0.0 0.0 0.0 -2.3
3.0 1.19 11.31 0.00 1.00 20.36 20.36 41.4 8.1 8.4 16.6 0.7
6.0 3.47 11.31 0.00 1.00 11.31 31.67 46.7 12.7 6.0 18.7 3.7
9.0 5.41 11.31 0.00 1.00 11.31 42.98 60.6 17.2 7.0 24.2 6.7
12.0 7.70 11.31 0.00 1.00 15.83 58.81 83.3 23.5 9.8 33.3 9.7
13.5 9.65 5.65 0.00 1.00 8.48 67.29 94.5 26.9 10.9 37.8 11.2
15.0 11.28 5.65 33.90 1.00 6.79 107.98 392.6 43.2 113.8 157.0 12.7
16.5 15.12 5.65 45.45 1.00 3.96 157.39 468.3 63.0 124.3 187.3 14.2
18.0 16.20 5.65 2.40 1.00 6.79 166.58 197.1 66.6 12.2 78.8 15.7
19.5 16.20 5.65 3.20 0.60 26.46 196.24 294.0 78.5 39.1 117.6 17.2
21.0 16.20 5.65 3.20 0.60 26.46 225.91 323.6 90.4 39.1 129.4 18.7
22.5 16.20 5.65 3.20 0.60 26.46 255.57 353.3 102.2 39.1 141.3 20.2
24.0 16.20 5.65 3.20 0.60 26.46 285.23 383.0 114.1 39.1 153.2 21.7
25.5 16.20 5.65 0.00 0.60 26.46 311.70 409.4 124.7 39.1 163.8 23.2
27.0 16.20 5.65 0.00 0.60 26.46 338.16 435.9 135.3 39.1 174.4 24.7
28.5 16.20 5.65 0.00 0.42 25.77 363.94 492.2 145.6 51.3 196.9 26.2
30.0 16.20 5.65 0.00 0.42 25.77 389.71 518.0 155.9 51.3 207.2 27.7
31.5 16.20 5.65 0.00 0.42 25.77 415.48 543.7 166.2 51.3 217.5 29.2
33.5 16.20 7.54 0.00 0.42 34.36 449.85 578.1 179.9 51.3 231.2 31.2
35.0 16.20 5.65 57.24 1.00 0.00 507.09 1108.6 202.8 240.6 443.4 32.7
36.5 16.20 5.65 57.24 1.00 0.00 564.33 1159.8 225.7 238.2 463.9
38.0 16.20 5.65 57.24 1.00 0.00 621.58 1211.0 248.6 235.8 484.4
 Verical Pile Capacity Calculation (Static Analysis) As per IS 2911 Part 1 2010

Vertical Pile Capacity Calculation of pile For P-2

Pile Diameter 1000 mm Factor of Safety for Shaft Friction 2.5

As per is. 2911.1.1.2010 cl. 6.8.3
Earth Pressure Coefficient, Ks 1.00 Factor of Safety for Base Resistance 2.5
Max. Eff. Overburden Pressure at pile tip 15.0 t/m2
d/f = 1

Soil skin resistance till 3 m is not considered

Based on IS 6403 Base Resistance, Ppu = Ap * (C.Nc + q.Nq + 0.5.g.B.Ng)
Angle of Eff. Over-
Depth of Angle of Effective
Cohesion, C Shearing burden
Layer from GL Wall Unit wt. of Ppu
(t/m2) Resistance, Pressure at tip Nc Nq Ng C.Nc q.Nq 0.5.g.B.Ng
(m) friction, d soil (t/m3)
f 'qtip' (t/m2) (in tonnes)

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Overburden
0.0 0.0 0.0 0.0 0.00 0.00 9.00 1.00 0.00 0.00 0.00 0.00 0.00
3.0 1.0 1.5 1.5 0.80 2.39 9.00 1.00 0.00 9.00 2.39 0.00 8.94
6.0 1.5 2.0 2.0 0.72 4.31 9.00 1.00 0.00 13.50 4.31 0.00 13.99
9.0 1.6 2.5 2.5 0.73 6.57 9.00 1.00 0.00 14.40 6.57 0.00 16.47
12.0 1.4 2.0 2.0 0.76 9.06 9.00 1.00 0.00 12.60 9.06 0.00 17.01
13.5 0.0 30.0 30.0 0.78 10.56 9.00 20.05 22.40 0.00 211.67 8.76 173.12
15.0 7.3 0.0 0.0 0.96 14.39 9.00 1.00 0.00 65.70 14.39 0.00 62.90
16.5 7.8 2.0 2.0 0.98 15.00 9.00 1.00 0.00 70.20 15.00 0.00 66.92
18.0 8.1 0.0 1.5 0.94 15.00 9.00 1.00 0.00 72.90 15.00 0.00 69.04
19.5 7.6 0.0 2.0 0.94 15.00 9.00 1.00 0.00 68.40 15.00 0.00 65.50
21.0 7.6 0.0 2.0 0.96 15.00 9.00 1.00 0.00 68.40 15.00 0.00 65.50
22.5 7.6 0.0 2.0 0.96 15.00 9.00 1.00 0.00 68.40 15.00 0.00 65.50
24.0 7.6 0.0 2.0 0.96 15.00 9.00 1.00 0.00 68.40 15.00 0.00 65.50
25.5 13.0 0.0 0.0 0.96 15.00 9.00 1.00 0.00 117.00 15.00 0.00 103.67
27.0 12.7 0.0 0.0 0.96 15.00 9.00 1.00 0.00 114.30 15.00 0.00 101.55
28.5 12.7 0.0 0.0 1.01 15.00 9.00 1.00 0.00 114.30 15.00 0.00 101.55
30.0 11.5 0.0 0.0 1.01 15.00 9.00 1.00 0.00 103.50 15.00 0.00 93.07
31.5 11.5 0.0 0.0 0.99 15.00 9.00 1.00 0.00 103.50 15.00 0.00 93.07
33.5 0.0 30.0 30.0 0.99 15.00 9.00 20.05 22.40 0.00 300.75 11.10 244.93
35.0 0.0 32.0 32.0 0.99 15.00 9.00 31.63 32.65 0.00 474.45 16.18 385.34
36.5 0.0 32.0 32.0 0.72 15.00 9.00 31.63 32.65 0.00 474.45 11.75 381.86
38.0 0.0 32.0 32.0 0.45 15.00 9.00 31.63 32.65 0.00 474.45 7.33 378.39
 Verical Pile Capacity Calculation (Static Analysis) As per IS 2911 Part 1 2010

Shaft Friction Psu =( S(Ks.Pdi.Tand).Asi + a.c.As) Total Safe Load Safe Load
Eff. Over- Ult.
Depth of due to due to
burden Pressure Safe Load Pile Length
Layer from GL (Ks.Pdi.Tand). Psu Capacity, Shaft End
(m) at c.g of the Asi (m2) a a.c.As (Tonnes) (meters)
Asi Pu Friction Bearing
layer 'Pdi'
(t/m )
2 (Tonnes) (Tonnes) (Tonnes)

(1) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24)
0.0 0.00 0.00 0.00 1.00 0.00 0.00 0.0 0.0 0.0 0.0 3.7
3.0 1.19 9.42 0.29 1.00 9.42 9.72 18.7 3.9 3.6 7.5 6.7
6.0 3.47 9.42 1.14 1.00 14.14 25.00 39.0 10.0 5.6 15.6 9.7
9.0 5.41 9.42 2.23 1.00 15.08 42.30 58.8 16.9 6.6 23.5 12.7
12.0 7.70 9.42 2.54 1.00 13.19 58.03 75.0 23.2 6.8 30.0 15.7
13.5 9.65 4.71 26.25 1.00 0.00 84.28 257.4 33.7 69.2 103.0 17.2
15.0 11.28 4.71 0.00 0.65 22.36 106.64 169.5 42.7 25.2 67.8 18.7
16.5 15.00 4.71 2.47 0.60 22.05 131.16 198.1 52.5 26.8 79.2 20.2
18.0 15.00 4.71 1.85 0.57 21.89 154.90 223.9 62.0 27.6 89.6 21.7
19.5 15.00 4.71 2.47 0.62 22.20 179.58 245.1 71.8 26.2 98.0 23.2
21.0 15.00 4.71 2.47 0.62 22.20 204.25 269.8 81.7 26.2 107.9 24.7
22.5 15.00 4.71 2.47 0.62 22.20 228.92 294.4 91.6 26.2 117.8 26.2
24.0 15.00 4.71 2.47 0.62 22.20 253.59 319.1 101.4 26.2 127.6 27.7
25.5 15.00 4.71 0.00 0.37 22.67 276.26 379.9 110.5 41.5 152.0 29.2
27.0 15.00 4.71 0.00 0.37 22.32 298.58 400.1 119.4 40.6 160.1 30.7
28.5 15.00 4.71 0.00 0.37 22.32 320.91 422.5 128.4 40.6 169.0 32.2
30.0 15.00 4.71 0.00 0.40 21.54 342.45 435.5 137.0 37.2 174.2 33.7
31.5 15.00 4.71 0.00 0.40 21.54 363.99 457.1 145.6 37.2 182.8 35.2
33.5 15.00 6.28 54.41 1.00 0.00 418.40 663.3 167.4 98.0 265.3 37.2
35.0 15.00 4.71 44.17 1.00 0.00 462.57 847.9 185.0 154.1 339.2 38.7
36.5 15.00 4.71 44.17 1.00 0.00 506.74 888.6 202.7 152.7 355.4
38.0 15.00 4.71 44.17 1.00 0.00 550.91 929.3 220.4 151.4 371.7
Vertical Pile Capacity Calculation ( T04 to Dargah Basti)
Pile Diameter 1200 mm Factor of Safety for Shaft Friction 2.5
Earth Pressure Coefficient, Ks 1.20 Factor of Safety for Base Resistance 2.5
Max. Eff. Overburden Pressure at pile tip 15.0 t/m 2
Adhesion Factor, a 0.3
d/f = 1
TOTAL LENGTH OF PILE BELOW PILE CAP BOTTOM = 15m
Based on Mayerhoff's eqn. Base Resistance, Ppu = Ap * (C.Nc + q.Nq + 0.5.g.B.Ng)
Depth of Angle of Eff. Over-
Angle of Effective
Layer from Cohesion, C Shearing burden
Wall Unit wt. of Ppu
below Pile cap (t/m2) Resistance, Pressure at tip Nc Nq Ng C.Nc q.Nq 0.5.g.B.Ng
(m) friction, d soil (t/m )
3
(in tonnes)
f 'qtip' (t/m2)

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)

Overburden 0.00
1.800 0.160 4.000 4.00 0.80 1.44 9.00 1.00 0.00 1.44 1.44 0.00 3.26
4.200 0.000 23.000 23.00 0.82 4.88 9.00 10.00 5.39 0.00 48.84 2.65 58.24
10.500 0.000 26.000 26.00 0.90 14.33 9.00 12.00 13.18 0.00 172.01 7.12 202.59
3.000 0.000 28.000 28.00 0.90 15.00 9.00 16.20 17.79 0.00 243.00 9.61 285.69

Shaft Friction Psu =( S(Ks.Pdi.Tand).Asi + a.c.As)

Total Safe Load Safe Load
Eff. Over- Safe Load
Depth of Ult. Safe Pile
due to due to after
Layer from burden Pressure
(Ks.Pdi.Tand). Capacity, Shaft End Load Length deduction
below Pile cap at c.g of the Asi (m2) a.c.As Psu
(m) Asi Pu Friction Bearing (Tonnes) (meters) of pile self
layer 'P ' weight
di
(Tonnes) (Tonnes) (Tonnes)
(t/m2)

(1) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24)
1.800 0.72 6.79 0.41 0.33 0.74 4.0 0.3 1.3 1.6 0.0
4.200 3.16 15.83 25.50 0.00 26.24 84.5 10.5 23.3 33.8 2.4
10.500 9.61 39.58 222.62 0.00 248.86 451.4 99.5 81.0 180.6 8.7 181.7
3.000 15.00 11.31 108.24 0.00 357.10 642.8 142.8 114.3 257.1 1.2
0.000 15.00 0.00 0.00 0.00 357.10 357.1 142.8 0.0 142.8 -1.8
0.000 0.00 0.00 0.00 0.00 357.10 357.1 142.8 0.0 142.8 -1.8
0.000 0.00 0.00 0.00 0.00 357.10 357.1 142.8 0.0 142.8 -1.8
 1.0 1.0
0.125 0.225 0.125
0.161 0.35
0.125
0.3

2.5 2.5 Depth of Superstructure

0.225 0.2
0.45 0.25

0.75 0.75

Long. Girder End Mid Avg.

Area 1.91075 m 2
1.03 1.470375 m2
Length 5 Both Side 31.5 3 Both Side
Volume 9.55375 32.445 4.411125
No./Span 3 3 3
Voi./Span 28.66125 97.335 13.23338
Weight/Span 71.65313 243.3375 33.08344

Cross Girder
Area 3.567 m2

Volume 20.6886 m3 For1 cross girder

Superstructure