DL331 TOP HAMMER

LONGHOLE DRILL
TECHNICAL SPECIFICATION

Sandvik DL331 is a fully-mechanized, highly versatile KEY FEATURES

and compact electro-hydraulic top hammer longhole Hydraulic rock drill HLX5 (20 kW)
drill designed for underground mining in 3 x 3 m or Drilling module LHF2000 / ERHC12
larger production drifts. It is capable of drilling vertical Rod length 4’ - 6’ (1 220 - 1 830 mm)
and inclined fans and single or parallel Ø51…76 mm Telescopic boom SB60P (1 200 mm extension)
longholes up to 23 meters in depth, using R32, T38 and Minimum drift size (H x W) 3 000 mm x 3 000 mm
T45 rock tools. Turning in T-section From 4.0 to 4.0 m drifts
The DL331 is mounted on a 4-wheel drive frame-steered Boom coverage (vertical holes) 6 800 mm
and diesel-powered carrier. It is equipped with the HLX5 Distance of holes from the wall Left 600 mm / Right 830 mm
hydraulic rock drill, LHF2000 feed, ERCH12 rod handler, Transport height (with cabin) 2 920 or 2 670 mm
SB60P boom, THC560 hydraulic control system and Transport width 1 990 mm
operator’s safety cabin for maximum productivity, safety Transport length 11 120 - 11 415 mm
and hole accuracy. The 360° drilling module rotation and Transport weight 15 500 kg
wide boom swing and tilt angles make the unit suitable
for most mining methods and various service support ROCK TOOLS AND HOLE LENGTH
applications. The THC560 drilling control system is fitted Maximum hole length (m)*
Rod Ø Hole Ø
with automatic features for maximum productivity in Type
(mm) (mm) 4’ rods 5’ rods 6’ rods
varying rock conditions, in up- and downhole drilling. R32 32 51 15.5 19.5 23.5
The layout of the NC5 carrier is designed for good T35 39 54 14.3 18 21.7
visibility and stability, ensuring safe tramming in narrow T38 39 64 14.3 18 21.7
mine drifts. The operating and maintenance interface T45 46 76 13.1 16.4 19.8
are designed for easy access, safe operation and all *) Feed in contact with rock and front stinger retracted
service points are accessible from the ground level.

1. SANDVIK DL331 TOP HAMMER - LONG HOLE DRILL

HYDRAULIC ROCK DRILL DRILLING CONTROL SYSTEM
Type of rock drill HLX5 (TS2-232) Type of control system THC560LH
Percussion power 20 kW Operating principle Hydraulic pilot control
Percussion pressure Up to 220 bar Control panel In safety cabin or canopy
Percussion rate 67 Hz
Full percussion
Rotation speed 0 - 250 rpm (OMS80) Collaring
Rotation torque 625 Nm (OMS125) Adjustable parameters Rotation / threading
Feed / anti-jamming
Weight 210 kg
Flushing
Length with shank adapter 1 100 mm
Control devices Gauges and indicators
Filling device for accumulators Specification 2-9110 Diagnostics system Alarm display

DRILLING MODULE ELECTRIC SYSTEM

Type of feed LHF2000 (TS2-175) Standard voltages 380 - 690 V (50 or 60 Hz)
Rod length 1 220 - 1 830 mm (4’ - 6’) Main switch gear MSE 5
Retaining centralizer FCC3 IP classification Specification TS2-132
Cuttings diverter Standard Allowed voltage fluctuation ± 10%
Set-off from stope face 600 mm Starting method Star-Delta (380 - 690 V)
Feed force 20 kN Automatic cable reel TCR1
Feed and return speed 0.1 m/s and 0.2 m/s (fast feed) Cable reel remote control At operator station and cable reel
Front and rear stinger Mounted on feed Power on when jacks on the
Electric power interlock
600 mm (front stinger) ground
Stinger extension
1 200 mm (rear stinger) Front and rear lights 8 x 50 W (24 V) LED
Length with stingers extended 5 050 - 5 660 mm Remote controlled search light 1 x 40 W (24 V) LED
Type of rod handling system ERHC12 (TS2-168) Carrier positioning lights 2 x Laser type
Storing capacity (R32 / T38 / T45) 13 / 12 / 11 rods Sealed AGM batteries 2 x 12 V (95 Ah)

DRILLING MODULE DIMENSIONS AIR AND WATER SYSTEMS

Feed Rod length Total length Flushing of holes By water
LHF2004 1 220 mm 2 850 mm Water booster pump type WBP1 (4 kW / 50 Hz)
LHF2005 1 525 mm 3 155 mm 33 l/min at 15 bar
Water pump capacity
LHF2006 1 830 mm 3 460 mm (inlet pressure = 4 bar)
Water pump inlet pressure 2 - 7 bar
LONGHOLE BOOM Flushing water pressure 10 - 20 bar
Telescopic boom SB60P (TS2-316) Air compressor CTN10 (1.0 m³/min at 7 bar)
Boom swing Left 29º / Right 31º Shank lubrication device SLU1 (air / oil mist)
Boom head swing Left 45⁰ / Right 45 Rock drill air consumption 180 - 250 l/min
Drilling module roll-over 360° Rock drill oil consumption 250 - 350 g/h
Boom extension 1 200 mm Air cleaner for external supply IP5
Drilling module travel 1 200 mm
Boom coverage (vertical holes) 6 800 mm OPERATOR’S SAFETY CABIN
Drilling module parallelism Automatic Cabin certification FOPS / ROPS (ISO3449)
Boom head swing ± 45° Type of cabin Standard height
HYDRAULIC SYSTEM Cabin height 2 920 mm
Power pack HPP555 (55 kW) Cabin inside height 2 000 mm
Total installed power 70 kW Cabin < 80 dB(A)
Sound pressure level EN791
Filtration (pressure / return) 20µ / 10µ Emitted 115 dB(A)
Oil tank volume 180 liters Air conditioning system For drilling and tramming
Cooler for hydraulic oil OW30 oil-to-water (30 kW) Operator’s seat Ergonomic T-back seat
Low oil level indication Low level oil switch Cabin safety grill For front screen
Set of tools For hydraulic adjustment (2-1900) CD/MP3-player, radio and loud-
Audio system
speakers

2. SANDVIK DL331 TOP HAMMER - LONG HOLE DRILL

CARRIER OPTIONAL ITEMS
Type of carrier NC5 (frame-steered) Electric system
Carrier articulation ± 40° *Voltage option 1 000 V (50 or 60 Hz) with DOL
starter
Rear axle oscillation ± 10° Automatic phase inversor N/A USC package and 1000 V
Ground clearance 320 mm Dewatering pump outlet readiness Max. 8 kW, 380 / 690 / 1 000 V
Diesel engine Deutz TCD2012 (74 kW, Tier 3) N/A USC package
Electric cables Specification TS2-121
Exhaust catalyzer Standard Ground fault and overcurrent VYK (N/A USC package)
Transmission Hydrostatic unit
Axles Spicer 112 (front) and 123 (rear) Power outlet on carrier 110 or 230 V (16 A) , site voltage
380-690 V
Tires 12.00-20 Amber flashing light LED (24 V)
Service brakes Hydraulically applied wet disc brakes Battery jump start CAT
Parking / emergency brakes SAHR type, fail safe wet disc brakes
Air and water system
Horizontal (0%): 12 km/h *Air compressor CT28 (2.8 m³/min, 18.5 kW)
Tramming speed
8°=1:7=14%: 5 km/h Air mist flushing kit For external air and water supply
2 x 60 liters air receivers For end-of-hole flushing (re-
Gradeability / sideways tilt Max. 15° / 5°
quires CT28)
2 x hydraulic telescopic jacks (front) Hooks and water hose Ø32 mm hose (length 80 m)
Carrier stabilization
2 x hydraulic jacks (rear) Water hose reel and hose THR and Ø32 mm hose
(length 80 m)
Fuel tank 80 liters
Tramming oil tank 55 liters Operator’s safety cabin or canopy
Filling pump for hydraulic oil Electric *Low height cabin (FOPS / ROPS) Unit height 2 670 mm
*Safety canopy and safety grill FOPS (ISO3449)
Hand held fire extinguisher 6 kg (type ABC) Cabin heating system For drilling and tramming (We-
Brake release By manual hand pump basto)
Tramming alarm Standard
Fire suppression system
Colour scheme Sandvik standard Spare hand held fire extinguisher 1 x 6 kg (type ABC)
2 x Operator’s manual Automatic fire suppression system FS1000 (above 0°C)
2 x Maintenance manual Manual or automatic system Ansul, 6 nozzles
Documentation 2 x Technical manual (in English only)
2 x Parts manual (in English only) Carrier
1 x CD of manuals (PDF files) *Foam filled tires 4 pcs
Fast filling and evacuation system Wiggins (complete)
Wheel chocks and holders 2 pcs
OPTIONAL ITEMS

Drilling system Extra items

Drilling module wear parts kit For alternative tools Spare rock drill HLX5
Power extractor For HLX5 Spare wheel assembly Standard or foam filled tires
Rear stinger extension kit 1 000 mm Special tools for rock drill Field kit or complete set
Warranty extension One year (excl. Kazakhstan)
Documentation Extra manuals
Instrumentation Package: Arctic Specification TS2-209
Access detector Mandatory in Europe (TS2-211) Package: Country specific options LAM, CAN, USC, AUS, EUR
Drilling instrument TIS with USB data collection Package: Harsh water Basic or Advanced (TS2-049)
Spirit level angle indicators 2 pcs (on feed) Package: Onboard air supply For air mist drilling
FDM remote monitoring For data management
*) replaces standard feature

Cleaning system
Low pressure system with reel Up to 15 bar (TS2-343)
High pressure system with reel Up to 220 bar (TS3-343)
*Two-directional fan Radiator and transmission oil cooler

Greasing system
Automatic system Lincoln (for carrier and boom)
Carrier centralized greasing Specification 5-2110
points
Manual system Greasing gun, cartridge and air hose
reel

3. SANDVIK DL331 TOP HAMMER - LONG HOLE DRILL

 6 800
600
2 175 29° 31°
160
55° 2 580
5 400
5 200 7 665
5 480 SANDVIK
4 600

DL 331
25°

7 000* 2 670

* Maximum drift width

All dimensions in mm

TS2-045:08/ENG/METRIC © Sandvik Mining and Rock Technology 2017 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
DRIFT AND UNIT DIMENSIONS
Type of feed LHF2004 LHF2005 LHF2006 40°
4 000 6 600
Drilling module total length (H) 2 850 3 155 3 460
Minimum drift size (mm) 3 000 3 300 3 600
Maximum drift height (mm)* 5 050 5 355 5 660
Maximum drift width (mm)* 6 700 6 850 7 000 3 180
40°
Unit overall length 11 120 11 415 11 415
*) with rear stinger **) for horizontal holes, with rear and front stinger

1 980

825 565

All dimensions in mm

Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.

SANDVIK.COM

4. SANDVIK DL331 TOP HAMMER - LONG HOLE DRILL