DS211L-M

LOW-PROFILE BOLTER
TECHNICAL SPECIFICATION

Sandvik DS211L-M is a fully mechanized one man KEY FEATURES

operated electro-hydraulic low profile bolting machine Coverage area 6 900 x 2 955 mm
for rock reinforcement in excavations with headroom as Hydraulic rock drill RD106, 6.5 kW
low as 1.6 meters. Bolting head TULPM
The robust rectangular profile telescopic boom allows Boom B26XL LPMB
the installation of several rows of bolts without moving Minimum drift size (H x W) 2 500 mm x 2 500 mm
the machine by a single operator working under the T-section width in turning 3 800 mm
FOPS / ROPS protective canopy. The exceptional «V» Transport width 2 260 mm
shape layout is designed for good visibility and balance, Transport height 1 380 mm / 1 950 mm
this and the powerful four-wheel-drive articulated carrier Transport length 11 360 mm
ensure fast and safe manoeuvring even in low headroom
14 500 kg
conditions. Total weight
depending on options
The high performance drilling system allows high drilling
performance with good drill steel economy and high
machine reliability. The operator environment and added
automatic functions allow the operator to concentrate
on safe, fast and accurate drilling and bolts installation.
All functions are piloted by a radio remote control, with
SICA platform for fault finding.
All the service points are well protected but easy to
access.

1. SANDVIK DS211L-M - LOW PROFILE BOLTER

HYDRAULIC ROCK DRILL DRILLING CONTROL SYSTEM
Type of rock drill RD106 (TS2-334) Type of control system THC561 (TS2-361)
Percussion power 6.5 kW Operating principle Hydraulic control
Percussion pressure 140 bar Drilling / bolting controls
Radio remote controls
Percussion rate 65 - 85 Hz Training mode
Rotation speed Max. 350 rpm (with OMM32) Adjustable full power
Rotation torque 100 Nm (with OMM32) Power control Adjustable collaring power
Hole size diameter (drifting) 22 - 45 mm Anti-jamming system

Recommended rod H25 Adjustable rotation speed

Rotation control
Shank adapter R23 (male) Reversible rotation
Weight 52 kg Flushing control Water flushing
Length 600 mm Drilling and boom
2 x switches and 1 x door interlock
Profile height 70 mm movement inhibition
Inflating device for accumulator Specification TS2-430
ELECTRIC SYSTEM
HYDRAULIC ROTARY DRILL Standard voltage 380 - 575 V (± 10%), 50 Hz
Type of rotary drill RHR54 wrench (TS2-250) Total input power 70 kW
Operating pressure Max. 210 bar Main switch gear MSE-1JH
Rotation speed Max. 1 000 rpm IP classification Specification TS2-132
Rotation torque Max. 450 Nm Starting method Star delta starter 380 - 575 V
Automatic cable reel TCR LPII with spooling system
BOLTING HEAD Cable reel control Operator station and rear of unit
Type of bolting head TU-LPM 60 (TS2-047) Automatic brake application
Cable reel end switch
Type Mechanized, double pass before end of cable
Drill rod MF R23 - H25 1 x power cable available in the
Proximity detection readiness
Bolt magazine capacity 5 bolts operator compartment
Side wall bolt Right and left Battery switch 1 x double pole lockable switch
Bolting method Resin cartridge injection Working lights 2 x 43 W LED (24 V)
Driving lights 6 x 43 W LED (24 V)
BOOM Amber flashing light LED (24 V)
Type of boom B26XL-LPMB (TS2-261) Operator station light Standard
Parallelism Automatic hydraulic Sealed AGM batteries 2 x 12 V, 95 Ah
Boom extension 1 700 mm
Feed extension 500 mm AIR AND WATER SYSTEM
Bolting head roll-over 240° Flushing of holes By water
Bolting head positioning 80° (left), 110° (right) Water booster pump WBP1 (4 kW)
Boom weight, net 2 000 kg 33 l/min at 15 bar
Water pump capacity
(input pressure = 4 bar)
HYDRAULIC SYSTEM Water pump inlet pressure 2 bar (Min.)
Powerpack HPP155 (1 x 55 kW) Flushing water pressure 10 - 15 bar
Filtration (pressure / return) 20 µ / 10 µ Shank lubrication device SLU-1 (air / oil mist)
Oil tank volume 160 liters (drilling) Air compressor CTN16 (1.6 m³/min at 7 bar)
Filling pump for hydraulic oil Manual Manual air flushing 1 x 60 liters air receiver
Cooler for hydraulic oil OW30 oil-to-water (1 x 30 kW) Rock drill oil consumption 50 - 100 g/h
Stops the drilling when the oil level Rock drill air consumption 250 l/min
Hydraulic low level indicator
in drilling tank is low

Low water pressure, low air pres- OPERATOR’S SAFETY CANOPY

Safety shut down
sure, low oil level FOPS / ROPS (ISO 3449)
Canopy certification
Oil drilling safety temperature Above 75°C with mechanical stopper

High position : 1 950 mm

Unit height in tramming
Low position : 1 775 mm
Operation Seated operations
Operator’s seat Ergonomic T-back seat
Sound pressure level
Operator station: 98 dB(A)
according to EN 16228

2. SANDVIK DS211L-M - LOW PROFILE BOLTER

CARRIER OPTIONAL FEATURES AND PACKAGES
Type of carrier TCLP II (frame steered)
Air and water system
Carrier articulation ± 43° Air mist flushing External water / internal air,
Rear axle oscillation ± 15° CTN16 + 2 x 60 liters air receivers
Air mine connection With IP5 air cleaner
Ground clearance 300 mm
End of hole air flushing 2 x 60 liters air receivers
Diesel engine Deutz BF4M2012 (74 kW, Tier 2) Compressed air outlet Hose and reel for accessories
Diesel engine control Electronic, EMR Air / water hooks 2 hooks
Water hose with hooks 32 mm (1 ¼”), 80 meters
Exhaust catalyzer Standard
Transmission Hydrostatic, automotive Operator’s safety canopy
4 x radial piston Screen protection Specification TS2-062
Wheel motor
MSE18 high torque
Cleaning system
Tires 315/85 x 15
HP system with reel Up to 180 bar (TS2-343)
Service brakes Hydrostatic and positive braking
Parking and emergency Greasing systems
SAHR fail safe type wet disc brakes
brakes Centralized greasing points Carrier (TS2-463)
Brakes applied when neutral position Manual system Greasing gun and cartridge
Neutral braking with hose reel (TS2-463)
activated

8.6 km/h (Horizontal) Fire suppression system

Tramming speed
4.3 km/h (14%=1:7=8°) Hand held fire extinguisher 1 x 6 kg Type ABC
Gradeability / sideways tilt Max. 15° / 15° (according to EN 16228-2) Automatic system Ansul, 6 nozzles (TS2-460)
Auto. fire suppression system Sandvik Eclipse™ (TS2-461)
Fuel tank 60 liters
Tramming oil tank 50 liters
Carrier stabilization Vertical (front and rear) Carrier
Engine filter Diesel particulate filters (DPF)
Brake release Manual pump *Foam filled tires 4 pcs
Tramming alarm Standard ABA brakes Auto brake application on default
Wheel chocks and holder 2 pieces *Lockable filler cap Fuel and oil tanks
*MySandvik productivity Remote monitoring system (FDM)
MySandvik insight Remote monitoring system (FDM) Proximity interface (PDS system) CANbus Level 9 (TS2-381)
Document box A3 format
Access point Yellow reflective (stair and handle)
Extra items
Colour scheme Sandvik Berg plug / Berg base
Spare rock drill RD106
2 x Operator’s and maintenance manual Tools and pressure test box Specification TS2-429
2 x Parts manual (in English only)
Documentation Spare wheel assembly Air or foam filled tire
2 x USB key of manuals (PDF files)
Special tools for rock drill Field tool set (TS2-445)
1 x Online Parts manuals (MySandvik)
Complete tool set (TS2-446)
Special tools for rotary drill Field tool set
Documentation Extra paper, PDF manuals
OPTIONAL FEATURES AND PACKAGES Warranty extension One year (excl. Kazakhstan)
Bolting head Package: Country specific SAS (Specification TS-155)
*Type of bolting head TU-LPM 50 (Bolt length 1.5 - 1.6) Package: Extra safety Specification TS2-275
TU-LPM 2.1 meters single pass holes Package: *Harsh water Basic or advanced (TS2-049)
with 2 x 60 liters air receivers
Resin mixing system Automatic *) Replaces standard feature
Additional rod handler Optional

Hydraulic system
*Filling pump for hydraulic oil Electric
Additional tramming HP filter 10 micron

Electric system
Electric cabinet Protection door
*Starting method Soft starter 380 - 575 V only
Electric cables Specification TS2-121
Ground fault and overcurrent VYK
protection
Indicator light for jacks up Sensors in the jacks
Dewatering pump outlet Max.11 kW (380 - 575 V)
readiness

3. SANDVIK DS211L-M - LOW PROFILE BOLTER

 TS2-141:08/ENG/METRIC © Sandvik Mining and Rock Solutions 2021 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
5 150

45°
1 950
1 775 1 360 1 980
DS211L

1 380

1 800 3 650
6 220
11 360

3 800
6 870

3 465
43°

1000 165
300
2 260
All dimensions in mm

Sandvik Mining and Rock Solutions reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.

ROCKTECHNOLOGY.SANDVIK

4. SANDVIK DS211L-M - LOW PROFILE BOLTER