Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 300 views

    Sherwin-Williams Primer E67BC1704 20141007 PDF

    Uploaded by

    Lorenzo Rodriguez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sherwin-Williams Primer E67BC1704 20141007 PDF

    Uploaded by

    Lorenzo Rodriguez
    300 views2 pages

    Original Title

    Sherwin-Williams Primer E67BC1704 20141007.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    300 views2 pages

    Sherwin-Williams Primer E67BC1704 20141007 PDF

    Uploaded by

    Lorenzo Rodriguez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PRODUCT DATA SHEET


    E67BC1704, E67BR1704 Polane P Black Conductive Primer is a low bake, low VOC, two component urethane designed to
    provide superior adhesion to various rigid plastic substrates. The highly conductive film facilitates electrostatic application of
    topcoats for improved transfer efficiency.

    SURFACE PREPARATION
     Thoroughly clean bare substrates with SC159 Plastic Cleaner / Anti-static to remove all mold release or
    power wash agents.
     Follow with a deionized water rinse.

    SUITABLE SUBSTRATES
     SMC  PC/ABS
     ABS  Black Conductive In-Mold Coating
     Nylon  Sanded DCPD

    MIXING
     Agitate E67BC1704/E67BR1704 thoroughly before using.
     Mix by volume 4 parts E67BC1704, E67BR1704 with 1 part V66V27 hardener and 2 parts VS100.
    reducer. Or Mix by volume 5 parts E67BC1704, E67BR1704 with 1 part V66V29 hardener and 3 parts
    VS100 reducer.
     Mix well. Pot life: 6 hours at 75F

    + + + +
    4 parts 2 part 1 part 5 Parts 3 Parts 1 Part
    E67BC1704, Reducer Hardener E67BC1704, Reducer Hardener
    E67BR1704 VS100 V66V27 E67BR1704 VS100 V66V29

    REDUCER TEMPERATURE RANGE


    VS100 50-75°F

    APPLICATION
    1. Apply 1 wet coat of E67BC1704, E67BR1704 at a distance of 8-10 inches with 50% overlap.
    2. Apply approximately 3.5 wet mils to achieve 1 mil dry.
    3. E67BC1704, E67BR1704 can be applied using conventional, HVLP or electrostatic equipment.
    4. Apply topcoat within 6 months of E67BC1704, E67BR1704 application.

    PERSONAL PROTECTION
    • Read all label directions before use. • Wear a NIOSH approved dust particulate
    • Refer to MSDS for specific information. mask when sanding.
    • Wear positive-air respirator when • Wear safety goggles, coveralls and latex gloves when
    mixing and applying. using product.

    DRYING SCHEDULE
     Ambient Flash: 10 minutes.
     Final Bake: 30 minutes at a minimum part temperature of 180 °F, 15 minutes at 200°F, or any previously
    tested cure conditions.
     For air dry application, V66V27 must be used.
     E67BC1704, E67BR1704 Polane P Black Conductive Primer will accommodate alternative drying
    schedules. Consult Sherwin-Williams representative for feasibility assessment.
    Note: E67BC1704 and E67BR1704 are the same product but filled in different containers.

    1

    PRODUCT DATA SHEET


    TECHNICAL DATA
    Mixing Ratio by Volume (E67BC1704 : VS100 : V66V27) 4:2:1
    ( E67BC1704 : VS100 : V66V29) 5:3:1 Performance Data
    Max VOC @ 4:2:1 3.5 lbs/gal Ford ESB-M6J106-C1
    Ready to Spray Volume Solids 49-00087
    26 % Freightliner (Rel:PA2024-61)
    Coverage @ 1 mil dry (white) 419 FT2/gal Volvo STD5751,55
    Pot Life 6 hours at 75F PACCAR CS0036
    Viscosity (sprayable) #2 Signature (ISO calibrated) 18-22sec International TMS-9005
    Recommended Dry Film Thickness 0.8 – 1.2 mils

    E67BC1704 As Packaged As Applied


    Lb/Gal G/L Lb/Gal G/L
    Density 10.41 1247 9.20 1102
    % by Wt. % by Vol. % by Wt. % by Vol.
    Volatiles 46.3 67.4 56.3 73.9
    Solids 53.7 32.6 43.7 26.1
    Water 0 0 0 0
    Exempt Compounds 27.3 41.7 38.1 52.4
    Lb/Gal G/L Lb/Gal G/L
    VOC Total 1.97 236 1.67 200
    VOC Less Exempt 3.39 406 3.52 422
    Lb/Gal KG/L Lb/Gal KG/L
    HAPs 0 0 0 0
    E67BR1704 As Packaged As Applied
    Lb/Gal G/L Lb/Gal G/L
    Density 10.41 1247 8.78 1051
    % by Wt. % by Vol. % by Wt. % by Vol.
    Volatiles 46.3 67.4 58.7 74.9
    Solids 53.7 32.6 41.3 25.1
    Water 0 0 0 0
    Exempt Compounds 27.3 41.7 44.4 58.4
    Lb/Gal G/L Lb/Gal G/L
    VOC Total 1.97 236 1.26 151
    VOC Less Exempt 3.39 406 3.03 363
    Lb/Gal KG/L Lb/Gal KG/L
    HAPs 0 0 0 0

    NOTE: PPAP Process Approvals supersede this document.

    To learn more about Sherwin Williams® Automotive Refinish Products, visit our Web site at www.sherwin-automotive.com
    ©2011 The Sherwin-Williams Company Printed in USA AS
    Cleveland, OH 44115 8/2/11

    You might also like