Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 58 views

    APP SPEC Galvanize - SSPC SP2

    Uploaded by

    Muhammad Asif
    This document provides specifications for applying coatings to corrugated galvanized iron substrates. It outlines environmental conditions for application, including surface temperature and humidity limits. It also describes surface preparation methods, including cleaning, abrasion, and profile requirements for both new and previously painted surfaces. Inspection requirements are listed, including daily reporting of conditions, dust assessments, and dry film thickness measurements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    APP SPEC Galvanize - SSPC SP2

    Uploaded by

    Muhammad Asif
    58 views2 pages
    This document provides specifications for applying coatings to corrugated galvanized iron substrates. It outlines environmental conditions for application, including surface temperature and humidity limits. It also describes surface preparation methods, including cleaning, abrasion, and profile requirements for both new and previously painted surfaces. Inspection requirements are listed, including daily reporting of conditions, dust assessments, and dry film thickness measurements.

    Original Title

    APP-SPEC-Galvanize---SSPC-SP2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for applying coatings to corrugated galvanized iron substrates. It outlines environmental conditions for application, including surface temperature and humidity limits. It also describes surface preparation methods, including cleaning, abrasion, and profile requirements for both new and previously painted surfaces. Inspection requirements are listed, including daily reporting of conditions, dust assessments, and dry film thickness measurements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    58 views2 pages

    APP SPEC Galvanize - SSPC SP2

    Uploaded by

    Muhammad Asif
    This document provides specifications for applying coatings to corrugated galvanized iron substrates. It outlines environmental conditions for application, including surface temperature and humidity limits. It also describes surface preparation methods, including cleaning, abrasion, and profile requirements for both new and previously painted surfaces. Inspection requirements are listed, including daily reporting of conditions, dust assessments, and dry film thickness measurements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Co.Reg. No.

    2014/028091/07

    18 Skietlood Street Tel: +27 11 974 9300


    Isando, Kempton Park Fax: +27 11 392 5560
    South Africa Cell: +27 82 902 4038

    P.O. Box 323 Email: nui@urethanes.co.za


    Edenvale, 1610 Website: www.urethanes.co.za
    South Africa Skype: urethanes

                             
    APPLICATION SPECIFICATION: General 
     
    SUBSTRATE:  CORRUGATED, IBR – GALVANISED 
     
    SURFACE PREPARATION: SSPC‐SP2 
     
    PAGES: 2 
     
     
     
    1.0)  Weather Conditions: 
    No  coating  shall  commence  when  the  relative  humidity  exceeds  70%.    The  surface  temperature  must  be 
    greater  than  >3ºC  above  the  dew  point.    The  ambient  temperature  must  be  >5ºC.    Environmental 
    conditions shall be checked every 2 hours. 
     
     
    2.0)  Pre‐cleaning (Previously painted): 
    - Remove all surface contaminants, oil and grease in accordance with SSPC SP1. 
    - Any foreign matters to be removed by clean rag. 
    - Steam cleaning or organic emulsion cleaner (ASTM 4258) and allow drying. 
    - Water break free surface (ISO 8501‐1) water spray and visual; should form a continuous film when water is 
    applied in thin layer. 
     
     
    2.1)  Pre‐cleaning (New): 
    - Remove all surface contaminants such as wax oil and grease by solvent cleaning with Galvi Clean (Plascon). 
    - Ensure contaminants aren’t spread on surface by conducting a water break free test. 
    - Water break free test to be conducted in accordance with (ISO 8501 – 1). When a mist of water is sprayed 
    onto the surface the water should form a continuous film if no oil base contamination is present.  
     
     
     
     
     

    DONOVAN SLADE**, GARTH JARVIS*, ANDRIES TSHABALALA*


    EXECUTIVE DIRECTOR**, NON EXECUTIVE DIRECTOR *
    3.0)  Surface Preparation (Previously Painted): 
    Thorough hand tool cleaning in accordance to SSPC‐SP2. Loosely adhering old paint coating may be 
    removed from substrate by means of: 
    - Hand wire brushing 
    - Sanding 
    - Scraping 
    - Chipping 
    Power tool cleaning in accordance to SSPC‐SP3. Power assisted hand tools to obtain a surface free of all 
    loose paint, and other loose detrimental foreign matter. 
    - Impact cleaning tools 
    - Rotary cleaning tools 
    - Rotary impact tools 
     
     
    3.1)  Surface Preparation (New): 
    - Lightly abrade the surface to remove any white rust that might be present on the surface.  
    - Solvent wipe to remove all surface contaminants NACE – SP1. 
    - Surface to be prepared in accordance with ASTM D1731. 
    - The galvanized surface must be free of protrusions and slightly roughened to provide an anchor profile. 
    - Hand or power‐tools can be used in accordance to st2 and st3. 
     
     
    4.0)  Cleanliness of Surface Prior to Application: 
    - No significant visual dust.  
    - Newly abraded profile is cleaned to a dust and debris ISO 8502‐3 max rating 2. 
     
     
    5.0)  Inspection and Test Reports: 
    - Daily reports for humidity, temperature, dew point and surface temperature shall be recorded.  
    - Dust and debris free (ISO 8502‐3 rating 2 maximum). 
    - Dry film thickness measurements (SSPC‐PA 2 – type 2 gauge (eddy current)). 
    - Electric Insulation defects report. 
     
     
     
     
    The information contained in this bulletin is, to the best of our knowledge, true and accurate, but any recommendations or suggestions,
    which may be made, are without guarantee since conditions of use are beyond our control. Furthermore, nothing contained herein shall
    be considered as a recommendation to use any product in conflict with the existing patents covering any material and its use.

    Any technical assistance or advice given by any employee of the supplier has been given in good faith and to the best of the employee’s
    knowledge. However, the supplier cannot be held liable in the event of such assistance or advice being misinterpreted or being in any way
    or from any cause incorrect, invalid, or mistaken.   

    Page 2 of 2 

    You might also like