The document describes two versions of the High Chief hydraulic pump. One version includes a reciprocation timer, while the other version does not. The pump without the timer is designed to be controlled by the G2 controller's pulsed second output. The pump with the timer can be controlled by the Universal lube Management controller and includes the timer to produce the required pulsed signal. The High Chief pump is an improvement over the previous Pilot Chief model as it can operate on different circuits beyond just the pilot circuit and meets demands for higher operating pressures.
The document describes two versions of the High Chief hydraulic pump. One version includes a reciprocation timer, while the other version does not. The pump without the timer is designed to be controlled by the G2 controller's pulsed second output. The pump with the timer can be controlled by the Universal lube Management controller and includes the timer to produce the required pulsed signal. The High Chief pump is an improvement over the previous Pilot Chief model as it can operate on different circuits beyond just the pilot circuit and meets demands for higher operating pressures.
The document describes two versions of the High Chief hydraulic pump. One version includes a reciprocation timer, while the other version does not. The pump without the timer is designed to be controlled by the G2 controller's pulsed second output. The pump with the timer can be controlled by the Universal lube Management controller and includes the timer to produce the required pulsed signal. The High Chief pump is an improvement over the previous Pilot Chief model as it can operate on different circuits beyond just the pilot circuit and meets demands for higher operating pressures.
The document describes two versions of the High Chief hydraulic pump. One version includes a reciprocation timer, while the other version does not. The pump without the timer is designed to be controlled by the G2 controller's pulsed second output. The pump with the timer can be controlled by the Universal lube Management controller and includes the timer to produce the required pulsed signal. The High Chief pump is an improvement over the previous Pilot Chief model as it can operate on different circuits beyond just the pilot circuit and meets demands for higher operating pressures.
• One version is with reciprocation timer (Pump Model 03-000920)
• The other version is without reciprocation timer.
(Pump Model 03-000921)
03-000920 03-000921 High Chief G2 Pump without reciprocation timer Controller
• Designed to be controlled by the G2 controller
•The second output (sol) from the G2 is a pulsed output designed to reciprocate the Second output is Pulsed pump
03-000921 High Chief G2 Pump without reciprocation timer Controller • TheG2 controllers output (M) should be used to control the electric vent valve P/No.528-32083-1
Second output is Pulsed
03-000921 High Chief Pump without reciprocation timer G2 Controller • UsingG2 controller in system with hydraulic vent valve, output (M) must control an additional 3/2 hydraulic valve.
Second output is Pulsed
03-000921 High Chief Pump with reciprocation timer • Designed to be controlled by the Universal lube Management controller
• The Universal controller
pump control output is a steady output. The pump mounted reciprocation timer (03-000014) produces the required pulsed signal. High Chief Pump with reciprocation timer
•Note the electric vent valve is
connected in parallel with the reciprocation timer. High Chief Improvements over Pilot Chief •It now designed to run off other circuits rather than just the pilot circuit. High Chief Improvements over Pilot Chief •Meets the demands of the new high pressure in which the SL-V & SL-VXL can operate. High Chief High Chief
