Pizzato Limit
Pizzato Limit
Pizzato Limit
CONTACT
BLOCKS
SEPARATE
ACTUATORS
See page 135
NF B110AB-DN2 GR7T6W5
Housing Redirection
NF technopolymer, hole spacing 20 mm without redirection
W5 90° redirection
Contact block Ambient temperature
B11 1NO+1NC, snap action (standard) -25°C … +80°C (standard)
B02 2NC, snap action (standard) T6 -40 °C … +80 °C
B12 1NO+2NC, snap action (standard)
Rollers
B22 2NO+2NC, snap action (standard)
G11 1NO+1NC, slow action (standard) standard roller
G02 2NC, slow action (standard) R30 stainless steel Ø 10.6 mm
G12 1NO+2NC, slow action (standard) R29 stainless steel Ø 13 mm
G22 2NO+2NC, slow action R18 technopolymer, Ø 14 mm
H11 1NO+1NC, slow action, make before break R23 stainless steel Ø 14 mm
H12 1NO+2NC, slow action, make before break R7 technopolymer, Ø 18 mm
H22 2NO+2NC, slow action, make before break R22 technopolymer, Ø 20 mm
L11 1NO+1NC, slow action, close R24 stainless steel Ø 20 mm
L12 1NO+2NC, slow action, close R19 technopolymer, Ø 22 mm
L22 2NO+2NC, slow action, close R25 technopolymer, Ø 35 mm
Other contact blocks on request. Contact type
silver contacts (standard)
Actuator heads G silver contacts, 1 µm gold coating
0 without head Connection type
2 head for swivelling lever actuators cable, length: 0.2 m with M12 connector
0.2 (available for DM0.2 versions only)
Actuators 2 cable, length: 2 m (standard)
AA short plunger 5 cable, length 5 m (other cable lengths available on request)
AB plunger K integrated connector
... ........................
Cable or connector type
N PVC cable IEC 60332‑1 (standard)
Output direction G PVC cable CEI 20‑22 II
D cable or connector, right H PUR cable, halogen free
S connector, bottom M M12 connector
A AMP Superseal 1.5 connector
Technical data
Housing
Housing made of glass fibre reinforced technopolymer, self-extinguishing, shock-proof
and with double insulation .
Versions with integrated cable, standard length 2 m. Other lengths 0.5 … 10 m or
special cables available on request.
Versions with integrated M12 connector.
Versions with 0.2 m cable length and M12 connector, other lengths 0.1 … 3 m
available on request
Protection degree: IP67 acc. to EN 60529
IP69K acc. to ISO 20653
(Protect the cables from direct high-pressure and
high-temperature jets)
Corrosion resistance in saline mist: ≥ 300 hours in NSS acc. to ISO 9227
General data
Ambient temperature for switches without cable: -25°C … + 80°C (standard)
-40°C … + 80°C (extended T6)
Ambient temperature for switches with cable: See table on page 128
Max. actuation frequency: 3600 operating cycles/hour
Mechanical endurance: 20 million operating cycles
Mounting position: any
Main features Safety parameter B10D: 40,000,000 for NC contacts
• Technopolymer housing, right or bottom cable Mechanical interlock, not coded: type 1 acc. to EN ISO 14119
output
Tightening torques for installation: see page 211‑222
• Protection degrees IP67 and IP69K
• 2 types of integrated cable available Electrical data
• Versions with M12 connector suitable for Rated impulse withstand voltage (Uimp): 4 kV
safety applications Conditional short circuit current: 1000 A acc. to EN 60947‑5‑1
Pollution degree: 3
• Versions with AMP connector
• 14 contact blocks available
• 37 actuators available In compliance with standards:
IEC 60947‑5-1, EN 60947‑5-1, IEC 60204‑1, EN 60204‑1, EN ISO 14119,
EN ISO 12100, EN 60529, ISO 20653, UL 508, CSA 22.2 No.14.
Quality marks:
If not expressly indicated in this chapter, for correct installation and utilization of all articles see the instructions given on pages
211 to 222.
Important: Switch off the circuit voltage before disconnecting the connector from the switch. The connector is not suitable for
separation of electrical loads.
Protection degree of the housing: IP67 In compliance with standard: UL 508, CSA 22.2 No.14
MA terminals (crimped terminals)
Pollution degree: 3
Utilization category: AC15 / DC13 (with connector)
Operating voltage (Ue): 250 Vac (50 Hz) / 24 Vdc (with connector)
Please contact our technical department for the list of approved products.
Operating current (Ie): 3 A / 2 A (with connector)
Forms of the contact element: X, Y, X+Y, X+X, Y+Y, Y+Y+X, X+X+Y, X+X+Y+Y, Zb
Positive opening of contacts on contact blocks B01, B11, B02, B12, B21, B22,
G01, G11, G02, G12, G21, G22, L01, L11, L02, L12, L21, L22, H01, H11, H02,
H12, H21, H22
In compliance with standards: EN 60947‑1, EN 60947‑5‑1 + A1:2009,
fundamental requirements of the Low Voltage Directive 2014/35/EU.
Please contact our technical department for the list of approved products.
Conductors 4x0.75 mm2 4x0.75 mm2 4x0.75 mm2 6x0.5 mm2 8x0.34 mm2 8x0.34 mm2 4x0.25 mm2 8x0.25mm2
Application field General General General, General General General, General General General
mobile installation mobile installation
In compliance with 05VV-F 05VV-F 05EQ-H 03VV-F 03VV-F 03E7Q-H 03VV-H 03VV-H /
standards
Sheath PVC PVC PUR PVC PVC PUR PVC PVC /
HALOGEN FREE HALOGEN FREE
Cable features
Self-extinguishing IEC 60332‑1-2 IEC 60332‑1-2 IEC60332‑1-2 IEC 60332‑1-2 IEC 60332‑1-2 IEC60332‑1-2 IEC60332‑3 IEC60332‑3 /
IEC 60332‑1-3 IEC 60332‑1-3 IEC60332‑1-3 IEC 60332‑1-3 IEC 60332‑1-3 IEC60332‑1-3 CEI 20‑22 II CEI 20‑22 II
IEC 60332‑3
CEI 20‑22 II
Oil resistant / / UL 758 / / UL 758 ISO 6722‑1 ISO 6722‑1 /
Outer diameter 7 mm 7 mm 7 mm 7 mm 7 mm 7 mm 5 mm 5 mm /
End stripped 80 mm 80 mm 80 mm 80 mm 80 mm 80 mm / / /
Copper conductors IEC 60228 Class 5 Class 5 Class 6 Class 5 Class 5 Class 6 Class 6 Class 6 /
Cable, fixed installation -25°C +70°C -25°C +70°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C /
Ambient temperature with cable
standard
Cable, flexible installation +5°C +70°C +5°C +70°C -25°C +80°C -5°C +80°C -5°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C /
Cable, mobile installation / / -25°C +80°C / / -25°C +80°C -15°C +80°C -15°C +80°C /
extended (T6)
Protection against short circuits 10 A 500 V 10 A 500 V 10 A 500 V 6 A 500 V 3 A 500 V 3 A 500 V 4 A 500 V 2 A 500 V 10 A 500 V
Electrical data
(fuse) type gG type gG type gG type gG type gG type gG type gG type gG type gG
24 V 2A 2A 2A 2A 2A 2A 2A 2A 2A
Utilization
category
DC13
24 V 4A 4A 4A 3A 3A 3A 4A 2A 4A
Utilization
category
AC15
120 V 4A 4A 4A 3A 3A 3A 4A / 4A
250 V 4A 4A 4A 3A 3A 3A 4A / 4A
CE cULus CE cULus CE cULus CE cULus
CE CE CE cULus CE cULus EAC
Approvals IMQ EAC IMQ EAC IMQ EAC CE EAC IMQ EAC
EAC CCC CCC
EAC CCC EAC
CCC CCC CCC CCC
R = snap action
L = slow action
Ø 7
Ø 8 Ø 8
Ø 8
8.7 21.3
8.7 16.1
8.7 11.3
Ø 11.6
8.7 8.8
51.7
51.7
51.7
43
43
43
43
20 20 20 20
30 16 30 16 30 16 30 16
Contact block
With external rubber gasket With external rubber gasket With stainless steel roller on request
30.1
27.4
8.7 21.3
15.2
8.7
8.7
4.3 4.3
8.7
4.3 4.3
51.7
51.7
51.7
51.7
43
43
43
43
20 20 20 20
30 16 30 16 30 16 30 16
Contact block
M12 connector, right M12 connector, bottom AMP Superseal 1.5 connector
M 12 x 1
20 20
20
30.3
30.3
60.5
74.5
12.1
85.4
43
26.7
39.1
42.1 16 30 M12 x 1
31.7
To order a product with M12 right connector, To order a product with M12 bottom connector, To order a product with AMP connector,
replace DN2 with DMK in the codes shown above. replace DN2 with SMK in the codes shown above. replace DN2 with SAK in the codes shown above.
Example: Example: Example:
NF B110AA-DN2 NF B110AA-DMK NF B110AA-DN2 NF B110AA-SMK NF B110AA-DN2 NF B110AA-SAK
All values in the drawings are in mm
Items with code on green background are stock items Accessories See page 197 The 2D and 3D files are available at www.pizzato.com
With stainless steel roller on request Unidirectional operation Secured only by means of threaded head
Contact type:
R = snap action
L = slow action It does not switch It switches
14 max
17
22
36.9
14
30.3
42.1
26.3
M12X1
3
8.7
8.7
8.7
8.7
4.3 4.3 4.3 4.3
51.7
51.7
51.7
51.7
43
43
43
43
20 20 20 20
30 16 30 16 30 16 30 16
Contact block
Secured only by means of threaded head Secured only by means of threaded head Plunger with Ø 6 mm ball With external rubber gasket
With external rubber gasket
55
Ø 7 3.6
119.9
12
13 max
Ø 8 Ø 7
9.1
16 max
17 17
39.3
37.3
M12X1
8.7 3.58.7
M12X1
3
8.7
8.7
8.7
4.3
3
51.7
51.7
43
43
43
43
20 20 20 20
30 16 30 16 30 16 30 16
Contact block
20
M12 x 1
51,7
43
30 Ø 14
16
With external rubber gasket With external rubber gasket With stainless steel roller on request With stainless steel roller on request
Contact type:
R = snap action
L = slow action
7.6 32.9 30.2
87
Ø 1.2
16.8 21.9
18 18
121.8
135.9
35
5.4
8.7 10.3
18.1
18.1
8.7
8.7
4.3 4.3 4.3 4.3
51.7
51.7
51.7
51.7
43
43
43
43
20 20 20 20
30 16 30 16 30 16 30 16
Contact block
With stainless steel roller on request With stainless steel roller on request With stainless steel roller on request With stainless steel roller on request
31.2
45.7 20.9
40.1
6.4 20
24.4 12
20
14 8.7 10.3 48.6 (43.6-50.6)
14
5.4 7
7
5.4
18.1
18.1
18.1
18.1
4.3 4.3 4.3 4.3
51.7
51.7
51.7
51.7
43
43
43
43
20 20 20 20
30 16 30 16 30 16 30 16
Contact block
M12 connector, right M12 connector, bottom AMP Superseal 1.5 connector
M 12 x 1
20 20
20
30.3
30.3
60.5
74.5
12.1
85.4
43
26.7
39.1
42.1 16 30 M12 x 1
31.7
To order a product with M12 right connector, To order a product with M12 bottom connector, To order a product with AMP connector,
replace DN2 with DMK in the codes shown above. replace DN2 with SMK in the codes shown above. replace DN2 with SAK in the codes shown above.
Example: Example: Example:
NF B110AA-DN2 NF B110AA-DMK NF B110AA-DN2 NF B110AA-SMK NF B110AA-DN2 NF B110AA-SAK
All values in the drawings are in mm
With stainless steel roller on request With stainless steel roller on request With stainless steel roller on request Square rod, 3x3 mm, stainless steel
Contact type:
4.5 26.5
R = snap action 31.2
L = slow action 41.2 20.9
35.2 20 3 x3x125
16.9 10.9
20 20
19 - 116
43 (38-45)
8.7 10.3 40 (35-42)
27 - 93
7
7 7
8.7 10.3
18.1
8.7 10.3
18.1
18.1
8.7 10.3
18.1
4.3 4.3 4.3 4.3
51.7
51.7
51.7
51.7
43
43
43
43
20 20 20 20
Contact block 30 16 30 16 30 16 30 16
Round rod, Ø 3 mm, stainless steel Glass fibre rod 33 Porcelain roller
4.5 26.5 27.8 33
10 19
Ø 9 19
Ø 6 x200
80.3 (75.3-82.3)
Ø3 x125
55
109 (104-111)
56.5
19 - 116
19 - 189
7.3
18.1
8.7 10.3
8.7 10.3
18.1
18.1
18.1
8.7 10.3
8.7 10.3
4.3 4.3
4.3 4.3
51.7
51.7
51.7
51.7
43
43
43
43
20 20
20 20
Contact block 30 16 30 16
30 16 30 16
20
M12 x 1
51,7
43
30 Ø 14
16
Contact type:
R = snap action
L = slow action
48
38 3.6 48 Ø12
12
Ø 8
3.6
20.9
20.9
20.9
8.7 10.8
8.7 10.8
8.7 10.8
4.3 51.7 4.3 4.3
51.7
51.7
43
43
43
20 20 20
30 16 30 16 30 16
Contact block
162.6
146.6 148.5 87
55
Ø 7.6
Ø7
Ø 1.2
Ø 7
20.9
20.9
20.9
8.7 10.8
8.7 10.8
8.7 10.8
51.7
51.7
43
43
43
20 20 20
30 16 30 16 30 16
Contact block
B11 R NF B110HB-DN2W5 1NO+1NC NF B110HE-DN2W5 1NO+1NC NF B110HH-DN2W5 1NO+1NC
G11 L
G12 L
G22 L
Max. speed 1 m/s 1 m/s 1 m/s
Actuating force 0.08 Nm 0.12 Nm 0.08 Nm
Travel diagrams page 220 - group 4 page 220 - group 4 page 220 - group 4
M12 connector, right M12 connector, bottom AMP Superseal 1.5 connector
M 12 x 1
20 20
20
30.3
30.3
60.5
74.5
12.1
85.4
43
26.7
39.1
42.1 16 30 M12 x 1
31.7
To order a product with M12 right connector, To order a product with M12 bottom connector, To order a product with AMP connector, replace
replace DN2 with DMK in the codes shown above. replace DN2 with SMK in the codes shown above. DN2 with SAK in the codes shown above. Example:
Example: Example: NF B110AA-DN2 NF B110AA-SAK
NF B110AA-DN2 NF B110AA-DMK NF B110AA-DN2 NF B110AA-SMK
All values in the drawings are in mm
Article Description
VN DT1F Spacer for NA and NF series
VF D16B Spacer for NB series
By installing spacers 16 16
between two switches, it is
possible to have 2 or more
pre-wired switches, preven‑
ting them from slipping.
M12 female connectors with cable For details see page 198
Technical data:
• Polyurethane connector body
• Class 6 copper conductors acc. to IEC 60228 - mobile installation
• Gold-plated contacts (resistance < 5 mΩ)
• Self-locking ring nut
• High flexibility cable with PVC sheath suitable to be used in drag chains, acc. to
IEC 60332‑3 and CEI 20‑22II. With polyurethane sheath on request
Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office.
VF CA4PD3M
No. of poles Connection type
4 4 poles M M12x1
Stock items
5 5 poles No. of poles
8 8 poles VF CA4PD3M
Cable length (L) 4 5 8 12
VF CA4PD5M
12 12 poles 1 1 metre VF CA4PD0M
2 2 metres VF CA5PD3M
Cable sheath
VF CA5PD5M
3 3 metres (standard) • •
P PVC (standard) VF CA5PD0M
4 4 metres
U PUR VF CA8PD5M
5 5 metres (standard) • • • • VF CA8PD0M
Connector type ... VF CA12PD5M
VF CA12PD0M
D straight (standard) 0 10 metres (standard) • • • •
Attention! No stock items, minimum order
G angled Other lengths on request
quantity 100 pcs.
Items with code on green background are stock items The 2D and 3D files are available at www.pizzato.com
VN AA000-W5
90° redirection
length (m)
length (m)
Cable
technopolymer
connector connector, connector, with cable and connector,
NA hole spacing 20 mm
with cable right bottom M12 connector bottom
NA B11000 1NO+1NC R
VN CM11DN2 2
NA G11000 1NO+1NC L
VN CM11DMK VN CM11SMK VN CM11DM0.2 0,2 VN CM11SAK
NA L11000 1NO+1NC LA
VN CM11DN5 5
NA H11000 1NO+1NC LO
NA B02000 2NC R VN CM02DN2 2
VN CM02DMK VN CM02SMK VN CM02DM0.2 0,2 VN CM02SAK
NA G02000 2NC L VN CM02DN5 5
NA B20000 2NO R /
VN CM20DMK VN CM20SMK VN CM20DM0.2 0,2 VN CM20SAK
NA G20000 2NO L /
NA B12000 1NO+2NC R
VN CM12DN2 2
NA G12000 1NO+2NC L
VN CM12DMK VN CM12SMK VN CM12DM0.2 0,2
NA L12000 1NO+2NC LA
VN CM12DN5 5
NA H12000 1NO+2NC LO
NA B22000 2NO+2NC R
VN CM22DN2 2
NA G22000 2NO+2NC L
VN CM22DMK VN CM22SMK VN CM22DM0.2 0,2
NA L22000 2NO+2NC LA
VN CM22DN5 5
NA H22000 2NO+2NC LO
To order a NB series housing, replace NA with NB in the codes It is not allowed to install VN CM••••• connectors on technopolymer housings
shown above. Example:
NA B11000 NB B11000
Contact type:
R = snap action
L = slow action
LO = slow action, make before break
LA = slow action, close
AMP
length (m)
length (m)
Cable
NF B12000 1NO+2NC R
VN CP12DN2 2
NF G12000 1NO+2NC L
NF L12000 1NO+2NC LA
VN CP12DN5 5
NF H12000 1NO+2NC LO
VN CP22DMK VN CP22SMK VN CP22DM0.2 0,2
NF B22000 2NO+2NC R
VN CP22DN2 2
NF G22000 2NO+2NC L
NF L22000 2NO+2NC LA
VN CP22DN5 5
NF H22000 2NO+2NC LO
Contact type:
NA metal housings NB metal housings R = snap action NF technopolymer housings
L = slow action
38
LO = slow action, make before break
LA = slow action, close
8.7
4.3
8.7
8.7
4.3
20 25 20
5.3
39
30.3
39
39
Quality marks:
30.3
30.3
30 16 30 16 30 16
metal connectors for NA and NB housings Other cable lengths on request technopolymer connectors for NF housings
H = PUR HALOGEN
H = PUR HALOGEN
Cable length (m)
Cable type
N = PVC
N = PVC
FREE
FREE
20.3
30 16 20.3 30 16
Important: Always check that the applied electric load is within the voltage and current limits defined for the connectors. See tables on page 118 and 128.
M12 x 1
11
11
20,3
34.3
34.3
20.3
20.3
30
14
16
14
VN CM11DMK 1NO+1NC VN CM11SMK 1NO+1NC VN CM11DM0.2 1NO+1NC VN CP11DMK 1NO+1NC VN CP11SMK 1NO+1NC
VN CM02DMK 2NC VN CM02SMK 2NC VN CM02DM0.2 2NC VN CP02DMK 2NC VN CP02SMK 2NC
VN CM22DMK 2NO+2NC VN CM22SMK 2NO+2NC VN CM22DM0.2 2NO+2NC VN CP22DMK 2NO+2NC VN CP22SMK 2NO+2NC
technopolymer connectors for NA and NB housings AMP superseal 1.5 with cable and M12 connector
AMP superseal 1.5
16
M12 x 1
16
20,3
46.7
39.1
30
46.7
16
39.1
15.6 31.7
15.6 31.7
Items with code on green background are stock items Accessories See page 197 The 2D and 3D files are available at www.pizzato.com
3.6
Ø 7 3.6
Ø 8 Ø 8 12
12
Ø 8
31.3
21.3
16.1
21.3
11.3
Ø 11.6
8.8
14 max
16 max
17 17
36.9
39.3
22
14
30.3
30.1
26.3
42.1
M12X1 M12X1
3
VN AA0CB VN AA0CH VN AA0CP VN AA0CV VN AA0EB VN AA0EE
7.6
87
Ø 1.2
55
3.6 119.9
121.8
135.9
12
13 max
Ø 8 Ø 7 Ø 7
9.1
17
37.3
3.58.7
M12X1
3
40 (35 - 42)
35 (30 - 37)
33 (28 - 35)
33 (28 - 35)
7
5.4 5.4
5.4 7
35
5.4
0.9 9.5
Ø 6 x200
20
3 X3X125 Ø3 X125
19 - 189
7
19 - 116
19 - 116
27 - 93
7 7
8.5
80.3 (73.5 - 82.3)
55
109 (104-111)
20 20
Ø 7.3 18
40 (35 - 42)
40 (35 - 42)
35 (30 - 37)
5.4 7
7
10.3
21.2 26.2
15.6 13.7 15.6 18.7
M5
20.9
18.1
10.8
10.3
15 15
VN AA200 VN AA000-W5
Items with code on green background are stock items Accessories See page 197 The 2D and 3D files are available at www.pizzato.com