210GE-01

(Full Internal Port)

MODEL
NGE210-01
(Reduced Internal Port)

Altitude Valve For One-Way Flow

• Accurate and Repeatable Level Control
3-Way On/Off Altitude
Level Control • Drip-Tight, Positive Shut-Off
CDS-6A • Reliable Hydraulic Operation
• Easily Adjustable Control
• Completely Automatic Operation
The Cla-Val Series 210 Altitude Valve controls the high water level in
reservoirs without the need for floats or other devices. It is a non-throt-
tling valve that remains fully open until the shut-off point is reached.
This valve is designed for one-way flow only.

This valve is hydraulically operated and pilot controlled. The pilot con-
trol operates on the differential in forces between a spring load and
the water level in the reservoir. The desired high water level is set by
adjusting the spring force. The pilot control measures the reservoir
head through a customer supplied sensing line* connected directly
to the reservoir.

This valve can also be furnished with auxiliary controls to meet the
need for multiple functions, such as: pressure sustaining, pressure
reduction, rate of flow control, solenoid override, etc.

If the check feature option is added and a pressure reversal occurs,

Schematic Diagram the downstream pressure is admitted into the main valve cover cham-
ber and the valve closes to prevent return flow.
Item Description
1 Hytrol (Main Valve)
2 RB-117 Isolation Ball Valve
3 X43 Strainer
4 CDS6A 3-Way On/Off attitude Level Control
5 6120 Needle Valve

Optional Features
Item Description
H1 CDC-1 & RB-117 Drain to Main Valve Outlet
T CVC & 81-01 Delayed Opening

Typical Applications
The CLA-VAL 210-01 is typically designed for
closed reservoirs where water is withdrawn through
a separate line. The desired water level is set by
adjusting the spring force. The pilot control oper-
ates on the differential in forces between a spring Strainer
load and the water level in the reservoir. AQUA 90-501

The CLA-VAL 210-01 is one way flow only. The

reservoir pressure sensing line should be 20 mm
minimum I.D. installed with 2° slope from the valve "Anti-Shock" Air
to the reservoir to avoid air pockets. Release & Vacuum
Break Valves
AQUA 70-506 CLA-VAL
210-01
Model 210GE-01(Uses Basic Valve Model 100GE-01) Dimensions
(In mm)
B

Pressure Ratings (Recommended Maximum Pressure - bar) 100GE-01 (Globe)

Pressure Class
Valve Body & Cover
Flanged Threaded
End
Grade Material PN10 PN16 PN25 PN40
Details
ASTM A536 Ductile Iron 10 16 25 40 20

Cover Capacity
Liquid Volume Displaced
from
Diaphragm Chamber
When Valve
Opens or Closes
Valve Displacement
Size (In Litres)

Materials 50 0.12
65 0.16
Component Standard Material Combinations
80 0.30
Body & Cover Ductile Iron - Fusion Bonded Epoxy coated 100 0.64
Available Sizes 32mm - 400mm 150 2.0

Disc Retainer & 200 4.8

Diaphragm Washer Cast Iron - Fusion Bonded Epoxy coated
250 9.5
Trim: Disc Guide,
Seat & Cover Bearing Stainless Steel 300 15.1
350 24.6
Disc EPDM
400 36.2
Diaphragm Nylon Reinforced EPDM
Stem, Nut & Spring Stainless Steel

100AE-01 (Angle)

Model 210GE-01 Dimensions (In mm)

Valve Size (mm) 50 65 80 100 150 200 250 300 350 400
A Threaded 238 280 318 — — — — — — —

AA Flanged 254 279 305 381 508 645 756 864 991 1051

AAAA Grooved End 228 279 318 381 508 645 — — — —

B Dia. 170 205 235 295 400 510 600 712 832 900

C Max. 165 192 208 270 340 406 435 530 614 635

CC Max. Grooved End 146 175 184 236 308 371 — — — —

D Threaded 121 140 159 — — — — — — —

DD Flanged 127 149 162 191 254 324 378 432 495 528

DDDD Grooved End 121 — 152 191 — — — — — —

E 38 43 52 81 110 135 235 273 321 394

EE Grooved End 64 73 79 108 152 192 — — — —

F 82.5 93 100 110 142.5 170 236 274 267 295

G Threaded 83 102 114 — — — — — — —

GG Flanged 89 110 111 126 153 203 219 349 378 398

GGGG Grooved End 83 — 108 127 — — — — — —

H BSP Body Tapping

3
⁄8 1
⁄2 ⁄2
1 3
⁄4 3
⁄4 1 1 1 1 1

J BSP Cover Center Plug

1
⁄2 1
⁄2 ⁄2
1 3
⁄4 3
⁄4 1 1 1 ⁄4
1
1 ⁄2
1
2

K BSP Cover Tapping

3
⁄8 1
⁄2 ⁄2
1 3
⁄4 3
⁄4 1 1 1 1 1
Z (Approx Outer Limits of
150 165 203 216 230 285 330 370 400 475
Pilot System)
Valve Stem Internal
Thread UNF 10-32 10-32 1
⁄4-28 ⁄4-28
1
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄2-20
1

Stem Travel 15 18 20 28 43 58 71 86 102 114

Approx. Ship Wt. Kgs. 20 25 30 50 95 170 310 470 726 970

Model NGE210-01 (Uses Basic Valve Model NGE100-01) Dimensions
(In mm)

Pressure Ratings (Recommended Maximum Pressure - bar)

Pressure Class
Valve Body & Cover
Flanged Threaded
End
Grade Material PN10 PN16 PN25 PN40
Details
NGE100-01 (Globe)

ASTM A536 Ductile Iron 10 16 25 40 20

Cover Capacity
Liquid Volume Displaced
Materials from
Diaphragm Chamber
When Valve
Component Standard Material Combinations
Opens or Closes
Body & Cover Ductile Iron - Fusion Bonded Epoxy coated Valve Displacement
Size (In Litres)
Available Sizes 50mm - 600mm
50 0.075
Disc Retainer & 65 0.16
Diaphragm Washer Cast Iron - Fusion Bonded Epoxy coated
80 0.12
Trim: Disc Guide,
Seat & Cover Bearing Stainless Steel 100 0.3
Disc EPDM 150 0.64
Diaphragm Nylon Reinforced EPDM 200 2.0
Stem, Nut & Spring Stainless Steel 250 4.8
300 9.5
350 15.1
400 15.1
450 36.2
500 36.2
600 36.2
Model NGE210-01 Dimensions (In mm)
Valve Size (mm) 50 65 80 100 150 200 250 300 350 400 450 500 600

A 230 290 310 350 480 600 730 850 980 1100 1200 1250 1450

B Dia. 145 170 170 235 295 400 510 600 712 712 712 900 900

C Max. 136 170 178 219 295 381 454 533 530 654 635 800 800

F PN16 83 93 100 110 143 170 200 228 260 290 325 370 430

FF PN25 83 93 100 118 150 180 213 243 278 310 335 370 430

H BSP Body Tapping 3

⁄8 3
⁄8 ⁄8
3 1
⁄2 ⁄4
3
⁄4
3
1 1 1 1 1 1 1

J BSP Cover Center Plug 1

⁄2 1
⁄2 ⁄2
1 1
⁄2 ⁄4
3
⁄4
3
1 1 11⁄4 11⁄4 2 2 2

K BSP Cover Tapping 3

⁄8 3
⁄8 ⁄8
3 1
⁄2 ⁄4
3
⁄4
3
1 1 1 1 1 1 1

Z (Approx Outer Limits of

190 200 200 200 250 270 290 365 400 425 450 520 520
Pilot System)

Valve Stem Internal Thread UNF 10-32 10-32 10-32 1

⁄4-28 1
⁄4-28 ⁄8-24
3
⁄8-24
3 3
⁄8-24 ⁄8-24
3
⁄8-24
3
⁄2-20
1
⁄2-20
1
⁄2-20
1

Stem Travel 10 15 15 20 28 43 58 71 86 86 86 114 114

Approx. Ship Wt. Kgs. 15 20 25 39 70 120 190 330 540 640 681 980 1060
 These Symbols A and B Indicate Available Sizes

Inches 2 21⁄2 3 4 6 8 10 12 14 16 18 20 24
Valve
Selection mm 50 65 80 100 150 200 250 300 350 400 450 500 600

End Detail Threaded & Flanged Flanged

Globe Pattern A A A A A A A A A A
CV (L/S) 13 20 28 48 111 185 299 414 552 706
Basic Valve
100GE-01
Angle Pattern B B B B B B B B B B
CV (L/S) 16 24 33 57 130 238 378 601 734 1009
Model
210GE-01
Max. Continuous 43 72 108 173 389 702 1080 1548 2088 2736
Suggested Flow
3
(M /hr)
Max. Intermittent 54 90 137 216 482 864 1350 1944 2628 3456

Max. Continuous 12 20 30 48 108 195 300 430 580 760

Suggested Flow
(Litres/Sec)
Max. Intermittent 15 25 38 60 134 240 375 540 730 960
Contact Factory for Sizes not Shown

Basic Valve
Globe Pattern A A A** A A A A A A A A A A
NGE100-01
CV (L/S) 9 12 16 33 58 133 222 359 455 497 575 847 895
Model
NGE210-01 Suggested Flow
Max. Continuous 36 61 90 144 316 565 882 1271 1732 2261 3535 3535 5090
(M3/hr)
Suggested Flow
Max. Continuous 10 17 25 40 88 157 245 353 481 620 982 982 1414
(Litres/Sec)
NGE210-01 is the reduced internal port size version of the 210GE-01 **Flanged End Detail Only Important Notice: Do Not Oversize
The flow coefficient CV, expressed as l/s is the flow which produces a 1 bar pressure drop across the fully open valve at a water temperature of 15 °c.
For 100GE-01 basic valves, suggested flow calculations were based on flow through Schedule 40 Pipe. Maximum continuous flow is approx. 6.1 meters/sec & maximum
intermittent is approx. 7.6 meters/sec. For NGE100-01 basic valves, suggested flow calculations were based on flow through the valve seat of approx. 5.0 meters/sec
was used for maximum continuous flow.
We recommend providing adequate space around valve for maintenance work Minimum Differential: 0.35 bar between valve inlet and outlet

Pilot System Specifications

When Ordering, Please Specify
Materials 1. Catalog No. 210GE-01 or NGE210-01
Adjustment Ranges
0.1 - 1.2 bar Standard Pilot System Materials 2. Valve Size
1.2 - 2.4 bar Pilot Control: Bronze ASTM B62 3. Pattern - Globe or Angle
2.4 - 3.6 bar Trim: Stainless Steel Type 303
4. Pressure Class
3.6 - 4.8 bar Rubber: Buna-N® Synthetic Rubber
4.8 - 6.0 bar 5. Threaded or Flanged
Optional Pilot System Materials 6. Materials Desired
Temperature Range
Water: to 65°c Pilot Systems are available with optional 7. Adjustment Range
Aluminum, Stainless Steel, or Monel 8. Desired Options
If flowing line pressure is less than materials at additional cost.
0.7 bar, consult factory for full details. 9. When Vertically Installed
If inlet pressure is above 10 bar, consult Valve position indicator is standard. 10. When "D" feature is ordered, the "H"
factory for recommendations. feature is required.

CLA-VAL
PO Box 1325 Newport Beach CA 92659-0325
800-942-6326 Fax: 949-548-5441 Web Site: cla-val.com E-mail: claval@cla-val.com
CLA-VAL CANADA CLA-VAL EUROPE CLA-VAL UK CLA-VAL FRANCE
4687 Christie Drive Chemin des Mésanges 1 Dainton House, Goods Station Road Porte du Grand Lyon 1
Beamsville, Ontario CH-1032 Romanel/ Tunbridge Wells ZAC du Champ du Périer
Canada L0R 1B4 Lausanne, Switzerland Kent TN1 2 DH England France - 01700 Neyron
Phone: 905-563-4963 Phone: 41-21-643-15-55 Phone: 44-1892-514-400 Phone: 33-4-72-25-92-93
Fax: 905-563-4040 Fax: 41-21-643-15-50 Fax: 44-1892-543-423 Fax: 33-4-72-25-04-17
E-mail sales@cla-val.ca E-mail: cla-val@cla-val.ch E-mail: info@cla-val.co.uk E-mail: cla-val@cla-val.fr
E-210GE-01/NGE210-01 ©COPYRIGHT CLA-VAL 2009 Printed in USA Specifications subject to change without notice.