DISHWASHER

OWNER'S MANUAL
MODEL : LD-12AS1 / LD-12AW2

Please read this manual carefully before operating your

dishwasher. Retain it for future reference.
CONTENTS

SAFETY AND CAUTION 3

INSTALLATION INSTRUCTION 4

PARTS NAME 8

FUNCTION OF CONTROL BUTTON 9

HOW TO USE AND OPERATE 10

WASH OPTIONS 15

PROGRAMS 16

CHECK AND CARE 18

TROUBLE SHOOTING GUIDE 19

SPECIFICATIONS
 SAFETY AND CAUTION

?
Please read this manual carefully before dishwasher.
using the dishwasher for the first time. ?
Do not use the detergent for hand
?
This manual contains very important washing.
notes regarding the installation, use and The detergent for dishwasher should be
maintenance of your dishwasher. used for normal operation.
?
The manufacturer can not be ?
If power supply cord is damaged, it

responsible for problems caused by must only be replaced by the

ignoring these safety and caution manufacturer its service agent or

or a

instructions. similar qualified person in order to

?
This dishwasher is designed for normal avoid a hazard.
household use.

?
Do not use the dishwasher for industrial ?
This appliance is fitted with a safety
and commercial use, or other purpose. function that automatically stops the
?
Electrical connection must be in operation of the dishwasher when it is
accordance with the rating label. exposed to heavy disturbance on its
?
Electrical safety is only guaranteed mains.
when the earth system of your house is ?
This appliance must be positioned so

in accordance with the related local that the plug is accessible.

regulations. (Please avoid use of an ?

Controls may be locked using "child
extension cable or cord.) lock" mode to prevent from starting
?
Only suitable household utensils should dishwasher accidentally.
be placed in the dishwasher. (Please ?
The appliance is not intended for use by
avoid utensils; that are non- young children or infirm persons
heartresistant, metal decorated, etc.) without supervision.

Keep detergents away from children. Young children should be supervised to

? ?

?
If the hot water exceeds 65˚C, adjust the ensure that they do not play with the
water heater setting. If the hot water appliance.
temperature can not be maintained ?
Do not insert anything such as coin into
below 65˚C, the dishwasher must be the vapor vent.
connected to cold water. It may cause the failure of mechonical
Do not any kinds of solvent in your parts and noise.
?
use

dishwasher. They may cause an ?

Do not get the body near to vapor vent.

explosion or fire. It may be scalded by hot water.

?
Do not spray water on the appliance. It

may cause the failure of electric parts or

electric shock.
?
Do not allow children to operate the
dishwasher.
?
Do not push down or sit on the inner
door when the door opened. It may
cause the deformation or failure of your

3
 INSTALLATION INSTRUCTION

Step1: Step2:
PREPARE CUPBOARD OPENING PREPARE ELECTRICAL WIRING

CAUTION
1 This dishwasher is designed to fit to the
For personal safety, remove house fuse or
size shown as below.
open circuit breaker before installation. Do not
use an extension cord or adapter plug with
2 Select a location as close to sink as
this appliance. Electrical andgrounding
possible for easy connections to water and connections must comply with the national
drain lines. electrical code/provincial and municipal code
and/or other local codes.
The dishwasher should not be installed
3
more than 3 meters from sink for proper

drainage. 1 This appliance must be supplied with

correct rating voltage and hertz as shown
If dishwasher is to be installed in a corner, on instruction manual, and connected to
4
aminimum 5cm of space is required an individual, properly grounded branch
between the washer and an adjacent circuit, protected by minimum 15 amp
cabinet or a wall. circuit breaker or time delay fuse.

Wiring must be 2 wires with ground.

The power point must be in a accessible

2
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side. A correctly rated, wired
and earthed extension cord may be used
if necessary. (See Fig. A)
min
600

820-870 3
The power point must be correctly
earthed, if in doubt, have it checked by a
100 75 qualified Electrician. No other appliance
should be connected to the same plug
outlet by a double adapter or similar

600-605 plug.
Cut out for
hoses and electrical
cables on either side.
Unit:mm (appox. 100 x 75)

If bare chipboard is adjacent to or above the

dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling due to steam.

4
 INSTALLATION INSTRUCTION

Step3: Step5:
PREPARE DISHWASHER FOR INSTALL THE DISHWASHER IN
INSTALLATION CUPBOARD
1 Lay the dishwasher on its back. 1 Before sliding the dishwasher into the
cupboard opening, all necessary final
Adjust the legs to the needed height of height adjustment and balancing
2
cabinet as shown by figure #1. adjustment should be done using the
spanner.

Slide the dishwasher into the cabinet

2
opening carefully. Make sure that the
drain hose inside the cabinet is not
Adjust kinked or exceeded.
screw

figure #1
600mm

Step4:
CONNECT DRAIN HOSE TO
DISHWASHER
1 Turn the drain connector at the back of
dishwasher to drain direction 820m
2
Connect the drain hose to the drain
connector tightly using hose clamp.
600~605mm
Water supply
Hose

Clamp Drain Hose

5
 INSTALLATION INSTRUCTION

Step6:
DRAIN LINE CONNECTION

1 If the end of drain hose does not fit to When the drain hose is connected to a

the drain line, piece use a of rubber separate stand pipe, it is essential that an

connector(not supplied) that must be air tight connection is made.

resistant to heat and detergent and may Refer to Fig.B
be obtained from a plumbing shop.

2 There are 2 typical connections as

shown in Figure A, B.
Air Tight
Connection

70mMin./1ax 30mMin.
The recommended methods of drain hose
connection must be adhered to within the Radius
40 mm
areas of Water Board Authority. Several Min.
other options are commonly used outside
this area and local council or plumbers
should be able to advise of these.

The "S" trap spigot must be drilled out Standpipe 40 mm

diametre min.
cleanly and free of obstruction to its
maximum internal diameter, if used for

drainage.
Fig. B : Drainage connection -
stand pipe.
To prevent siphoning, one of the following
instruction methods must be followed:

When the drainage hose is connected to a

sink "s" trap or waste disposal unit, the Drain Hose Extension
hose must be looped up to the underside Extend drain Hose as shown below.
of the bench top and secured.

200 mm Max.
Sink

70mMin. 10 mMax.
70mMin./1ax
Drain Hose
Copper pipe
Water Hose Ø20mm flared
at drain hose Radius
and other end 40 mm
if required Min.

30mMin. Power
Cord
30mMin.
Radius 40mm min
Drain hose extension or 16-20mm inside Ørubber
hose able to withstand 90˚C hot water
Fig. A

6
 INSTALLATION INSTRUCTION

Step7: Step8:
WATER SUPPLY CONNECTION FINAL CHECK AND
ASSEMBLING
1 Connect the water supply pipe to the 1 Securely hand tighten supply hose to
water valve in front of dishwasher as water supply.
shown in figure. Plug power cord into an earthed power
point and switch on.
2
When connecting, the sealing tape or
sealing compound should be used to 2 Operate the dishwasher through one
avoid water leaks. cycle (Quick cycle is recommended)
to check for water leak and operating
Make sure that the line is not kinked conditions.
or sharply bent.

Shut off Valve To Dishwasher

7
 PARTS NAME

6
12
1 7 16

8
2
13

3 17

9
4 14
18

10
5 15
19
11

1. Vapor vent 11. Adjust Leg

2. Control Panel 12. Upper Rack

3. Door Handle 13. Cutlery Rack

4. Front Cover 14. Detergent & Rinse Aid Dispenser

5. Lower Cover 15. Vapor Vent Cover
6. Process Monitor 16. Upper Spray Arm

7. Power Switch 17. Lower Spray Arm

8. Inlet valve ASM 18. Filter ASM

9. Drain Hose Connector 19. Lower Rack
10. Power Cord

Accessories

Inlet Hose Drain Hose

8
 FUNCTION OF CONTROL BUTTON

DELAY START China & POWER SWITCH

HALF LOAD
BUTTON Crystal BUTTON

?
If you want to delay the If you have small For operating, press this
?
a ?
Special ?

start of selected program, load for washing, program for a button first for power on.
press this button before this function.
use
washing of ?
After operating, this
pressing start button. ?
Selecting Half Load special dishes button automatically
?
Pressing the delay time shuts off flow to the like china or switches off for safety
will increase time by lower spray arm and energy saving.
crystal glasses.
1 hour. and reduces water ?
If case of irregular surge
?
The delay start time can and energy disturbances to the
be adjusted from 1 hour to
consumption machine, the power may
19 hours. be turned
automatically
off for safety.

Auto Power off

Delay Start
Child Lock
Rinse

REMAINING RINSE- START/PAUSE

CHILD LOCK PROGRAM
TIME PLUS BUTTON

?
Indication of ?
Used to lock or
?
When power is ?
With ?
With each press,
unlock the control on, program is each Start and Pause is
remaining
time buttons to prevent all automatically set
press, repeated during
to normal.
?
Self the setting from being rinse- operation.
diagnosis and changed by a child. ?Ifyouwantto plus is ?
If the machine

error ?
For locking/unlocking, change the added. remains in Pause
program, press the mode for 10
message press Delay Start and
button and set the minutes, the power
display Turbo Rinse button
program you want is automatically
simultaneously.
to. turned off.

9
 HOW TO USE AND OPERATE

1. Loading your Dishwasher

For the best washing performance, it is Take care not to obstruct the rotation
important that the dishwasher is loaded of the spray arms, and that larger items
according to instructions. do not prevent the detergent dispenser lid
Before loading items into the dishwasher, from opening.
you must scrape off large particles in
particular non soluble items such as bones,
toothpicks, pips, etc.

When loading the dishwasher, observe the

following general guidelines:

Position crockery such that water will

contact all surfaces.

Deep based items should be placed at an

angle to help water run off and dry

properly.
Items with burnt on scraps should be
soaked prior to loading in the dishwasher.

3. Using the Cutlery Basket

Cutlery should be mixed within each

section of the cutlery basket to prevent

nesting of similar items. Place the cutlery in

the cover with the handles down. The cover

can be
hinged and
clipped away from the
basket if you choose not to use them.

Take care when loading and unloading

sharp items.
2. Loading the Lower Rack

The lower basket is best loaded with dinner

plates, soup bowls, dishes, pots, pans, lids

and even the grill tray.
Plates should be positioned upright and

facing the center of the rack.

Pots, pans and large dishes must be turned

upside down.

10
 HOW TO USE AND OPERATE

4. Loading the Upper Rack

The upper rack is best loaded with more
delicate items, small plates, long cutlery,

cups, glasses and dishwasher safe plastic

items. Plates should be positioned upwards
and facing the front of the rack.
Cups, glasses and bowls must be positioned
upside down.
Extra cups or cooking utensils can be laid
on the fold down cup racks which may also

provide support for long stem glasses.

Take care not to obstruct the rotation of the

spray arm under the upper rack.

5. Adjusting the Upper Rack Non Dishwasher Safe Items

The combination of high water temperatures and
Your upper rack can be raised or lowered to dishwasher detergent may damage particular
cater for different size of crockery. Before
items, therefore we do not recommend using the
adjusting, ensure rack is empty of dishwasher to wash the following:
all crockery. Remove the rail pegs in front
of the rack runners by pulling back, then
Copper or anodized aluminum
slide the rack out. Re insert the rack in the Hand painted silver or gold leaf crockery
chosen position and replace the pegs. bone handled utensils
Wood or

Fitting the rack back into the standard Iron or non rust proof utensils
position reduces the space between the Plastic items which are not dishwasher safe.
upper and lower rack. After adjusting,
check that the spray arm is free to rotate.

11
 HOW TO USE AND OPERATE

6. Adding Detergent
Dispenser
?
Detergent must be put into the detergent
chamber before starting every program
the Rinse & Hold. Push latch to open
except

?
Use only the detergent intended for
household dishwashers. (Ordinary hand-
washing detergent should not be used,
because the foam can interfere with proper

operation.)

?
Chambers hold 15g and 25g. Place proper
detergent into this
?
The amount of detergent depends on the
compartment
program. Refer to the guide table.

PROGRAM AMOUNT OF DETERGENT

Soak 25g

Heavy 25g
Normal 20g
Eco 15g
Quick Detergent Information
10g
Use only the detergent intended for
Rinse/Hold No detergent
household dishwashers. (Ordinary hand-
washing detergent should not be used,
?
After the detergent is supplied, the
because the foam can interfere with proper
chamber lid should be closed.
operation.)
?
The detergent is dispensed automatically
during the operation.
WARNING
?
The chamber lid remains open after
The detergent used is a special Dishwasher
operation.
detergent and like all household chemicals
should be treated poison and kept out
as a

of reach of children. At completion of each

wash program, the detergent compartment
should be checked and any remaining
detergent removed.

12
 HOW TO USE AND OPERATE

7. Adding Rinse Aid

Dispenser
To fill the Rinse Aid chamber, rotate the

round cap counter clockwise and remove.

Fill the container to the maximum level
with a good quality Rinse Aid, then replace
and lock the cap.
The Rinse Aid is automatically dispensed
during the final rinse cycle.

Depending on the dosage setting and the

number of washes, the chamber may need

only to be topped up once per month. The

rinse aid level can be checked by looking at

the indicator window when the dishwasher

door is fully open.

Black indicates sufficient Rinse Aid

O Clear indicates Rinse Aid required

The dosage setting is factory set to suit Rinse-Aid

most installations. If, after washing, you Indicator
notice Adjust Lever
cloudy spots, streaks or water marks
(Rinse)
on your glassware, it may be necessary
increase the setting. To do so, remove the

cap and rotate the indicator arrow to a

higher setting then replace the cap If the .

glasses are smeared

there is foam present
or
Rinse Aid Information
on the bottom of the glass or the bottom of

the machine. Select a lower setting. Rinse Aid is necessary in order to get spot
and streak free dishes as well as improved

drying. Using the correct amount will

improve wash performance. However, using
too much can produce excess foam leading

to possible water leaks.

13
 HOW TO USE AND OPERATE

8. Fold down dividers.

Fold-down dividers at the back of the rack can

be lowered to improve stacking of pots and

pans.

14
 WASH OPTIONS

Before select the wash program, press the power button. Then Normal program
will be selected with remaining time on display window. To change the program,
press the button of the program as you want.

Start or Pause Button Child Lock

After selecting wash program, press the Start
a To reduce the possibility of children starting
or Pause button to start the wash cycle. the dishwasher when unattended, the child
If at any time you want to interrupt the lock feature can be selected.

washing cycle, press the Start or Pause button.

Your dishwasher will then pause. Press the For locking or unlocking, press "Delay
Start or Pause button again to re-start Start" and "Turbo Rinse" buttons
dishwasher. simultaneously.

Progress Indicators Turbo-Rinse

Once you select a program, the progress When you want to rinse dishes with higher
indicators light(Wash, Rinse, Dry). When press temperature for sanitation, use this function
the Start or Pause button to start the program, at any program. If you choose this function,
the current stage light will blink. the water temperature goes up to 77˚C when

rinsing.
Delay Start
This function enables the wash cycle to start Half Load(LD-12AS1 Model)
anywhere between 1 to 19 hours later. If you have small load for washing, use this
Select the program that you want by using function.
the program button. Selecting Half Load shuts off flow to the
Set the delay time you want by pressing the lower spray arm and reduces water and

"Delay Start" button. The delay start time is energy consumption.

increased by 1 hour for each pressing.
Press the start button. Then the program will
be started automatically after the delayed
time shown in the display has expired.

Rinse Plus
Normally when you select any program, the
Rinse process is done only two ( 1 normal
rinse +1 heating rinse) or three (2 normal rinse
+ 1 heating rinse) times according to selected
program. But if you want to rinse more, you
can use this function. As you select +1, +2 the

normal rinse will be done one or two times

more.

15
 PROGRAMS

Model : LD-12AS1

Wash Rinse Dry

P rogram Drain
Pre SOAK Main Rinse 1 Rinse 2 Rinse3
wash wash
20(min)

45C 70C 70C

Soak

70C 70 C

Heavy

60C 65C

Normal

50C 50C

Eco

40C 45C

Quick

Rinse & Hold

Heavy Wash Soak Wash

This program is for heavily soiled loads This program is for very heavily soiled

including pots, pans and casserole dishes. loads including pots, pans and casserole
dishes which may have dry food residue.

Normal Wash
This program is for normally soiled Quick Wash
everyday loads.
This program is for that quick wash of

Eco Wash lightly soiled recently used dishes and

cutlery.
This program is for light soiled everyday
loads.

16
 PROGRAMS

Model : LD-12AW2

Wash Rinse Dry

P rogram Drain
Pre SOAK Main Rinse 1 Rinse 2 Rinse3
wash wash
20(min)

45C 70C 70C

Soak

70C 70 C

Heavy

60C 65C

Normal

50C 50C

Eco

40C 45C

Quick

Rinse & Hold

40C 45C
China &
Crystal

Heavy Wash Soak Wash

This program is for heavily soiled loads This program is for very heavily soiled

including pots, pans and casserole dishes. loads including pots, pans and casserole
dishes which may have dry food residue.
Normal Wash
Quick Wash
This program is for normally soiled
This program is for that quick wash of
everyday loads.
lightly soiled recently used dishes and
Eco Wash cutlery.
This program is for light soiled everyday China & Crystal
loads.
This program is for that wash of special
dishes like china or crystal glasses.
17
 CHECK AND CARE

To prevent troubles and poor operating, it is important to check and care the
filters and spray
arms at intervals.

Filters Upper Spray Arm

?
Remove the lower rack first. ?
Pull the upper rack forwards.
?
Take the filters out with filter handle. ?
Check that the water jet holes are not
?
Lift out the coarse filter and middle filter blocked by food particles.
?
Clean them if necessary. ?
When necessary to clean, remove the arm

?
Replace them in the reverse order. by unscrewing the nut.
?
Clean the spray arm and replace it in the
reverse order.

Coarse filter

Middle filter

Upper spray arm

fine filter

Lower Spray Arm

?
Check that the water jet holes are not

blocked by food particles.

?
When necessary to clean, remove the arm

by pulling up.
?
Clean the spray arm and replace it pulling
down.

18
 TROUBLE SHOOTING GUIDE

If a problem occurs in your machine, call for service.

Before you call for service, check the below instructions to see whether the

problem can be solved by yourself first.

Problem Possible Causes

The lamps do not come ?

Plug is not properly inserted in the socket.
on when the power switch on. ?
Fuse blown or circuit breaker tripped.
?
The electricity of the house was cut off.

The machine does not start. ?

Door is not fully closed.
?
The start button is not pressed.

Water is not pumped away.

?
The drain hose is kinked.
" "

(The display show code) ?

The filter is clogged. (Clean the filter)

" "
The display shows code ?The machine is inclined.

" "
The display shows code ?
Water is not supplied. (Water tap is not opened)

The spray arms does not rotate ?

The mounting of spray arms is blocked by food
smoothly particles. (Clean the holes of the spray arm)

White deposits are left on the ?

The amount of detergent or rinse-aid set incorrectly.
dish washer after washing. ?
Salt is exhausted in the salt container.
?
The salt container cap is not securely screwed on.

Streaks are left on glassware ?

Too much Rinse-aid dispensed.

Dry results are not satisfactory. ?

Too little Rinse-aid dispensed.

Washing results are not ?

Incorrect amount of detergent.
satisfactory. ?
Utensils incorrectly arranged or overloaded.
?
Filters are clogged.
?
Water jet holes of spray arms blocked.
?
Spray arms' rotation obstructed by utensils.
?
Unsuitable program selected.

19
 600mm

600mm

850mm

Capacity 12 Place settings

Dimension
600x600x850mm(WxDxH)

Weight 52 kg
Power Supply See label
rating
Power Consumption See label
rating
Water Consumption See label
rating
Water Feed Pressure 30~800kPa

P/No.: 3828ED7001A