J

J
Evolution of standard model
The J Series checkweigher is an evolution of the already successful I Series range of Yamato
weighers. Improved productivity, easy operation and versatility ensure this model is relevant
across a wide range of industries.

Industry leading performance

Speed:

480
max.
45 %
ppm up*

Accuracy: Industry No.1

0.07
max.

± g 65 %
up*
*Compared to conventional model

Easy operation
Higher visibility 10.4 inch color touch screen
Easy initial settings and daily operation
Controller can be separated
 from the main body option
*Cable max length 10m

Reliability & Safety

Maintenance information function
Reject verification function option

2
 J

Industry leading performance

Speeds of 480ppm with an accuracy of ±0.07g

New load cell Dual load cell (option)

New type high rigid cell shortens the settle time therefore result- Where floor vibration is
ing in high speed and high accuracy weighing. an issue, the loadcell can
remove low frequency
vibration therefore main-
taining high accuracy
weighing.
Wide variety of conveyor sizes
A variety of conveyor sizes are available allowing products to be
weighed at the maximum speed and accuracy.

Easy operation
10.4 inch color touch screen offers higher visibility and better usability.

Easy initial setting

Easy initial
Yamatos 'Automatic program set up' allows initial settings to be settings and
performed without any complicated parameters. daily operation

Easy screen control & visibility

A highly visible and clear screen format for ease of operation

Removable Controller (option)

The control unit (screen) can be removed from the main body
and located up to 10m away.
In addition, adjustable angle of controller does not limit
operator’s working place and improve the work efficiency.

3
 Easy cleaning & maintenance
Error and alert functions
Monitoring errors such as
weigh error, photo sensor
error, motor error and so on
and alert them.
Showing the point of the
error and how to recover it
to minimize the downtime.

Parts replacement alert function

An indicator shows when
consumable parts require
replacement, this technology
can then reduce down time.

High capacity load cell Shorten maintenance time Tool free maintenance
The loadcell can withstand up to 1000% of By unitizing the parts, the maintenance The conveyor system has minimal compo-
its maximum capacity therefore providing and repair time are shortened. nents and can be removed and re attached
greater protection against accidental easily and without the use of tools.
damage cleaning or maintenance work.

4
 J

Outstanding food safety

J series Checkweigher is HACCP and GMP compliant and provides high level
of hygienic safety for wide range of production lines.

Tubular framework
The tubular framework is SUS with an open frame structure which
minimizes dust accumulation.

Compliant with food hygiene law

The conveyor belt is fully compliant and meets
food hygiene laws.

Reliability & safety

Item Alert
The clear display indicates any ares of concern that needs to be checked prior to daily
operation.

Reject verification (option)

By installing sensors at rejecter, it can confirm whether defective
products are being properly rejected and prevent those products from
being passed on to the next conveyor.

Environmental responsiveness
Eco-Design manufacturing
The backlight is automatically turned off when the unit is not in operation for a specified period of time.
The conveyor can also be stopped automatically when the unit is not operated for a period of time in order to save energy.
Minimizes the environmental impact by reducing the number of components.
Compliant with RoHS

5
 Overall flexibility
Wide pass line height variation
The line height and overall length of conveyors can be
changes to suit your specific factory requirements.

Options
Reject Device
Pass line height variations
Reject verification function
Signal light
Tri-colored light
Buzzer
Printer
Dual load cell Wind cover Printer
BCD product input
Feedback
Automatically conveyors stop function
Controller can be separated
 from the main body with cable. Print Sample
Wireless LAN function
Data acquisition software
Wind cover
 (main body & rejecter)
RS232C
Ethernet
External indicator
Tri-colored light
Conveyor support
BCD product output
Transfer plate
*Please contact us if you have other requirements.

Handling capability

6
 J

Combination Checkweigher and metal detector systems

Slim line and full size units available,

checkweigh and metal detect in one process and save on line space.

Features
One-process for metal detection and checkweigher
Combination solution can reduce the foot print of the
machine, and investment and maintenance cost.
Unified control for program change

High sensitivity
Utilizing simultaneous 2
↑
frequencies from 4 types Sensitivity
allowing higher sensitivity
measurements to detect
contaminants
High
O ri g i n al di g i t al s i g n al High
processing allows stable
detecting sensitivity. Fe detection SUS detection
frequency frequency

Reliable detecting sensitivity

self diagnostics through motion monitoring sensor fitted
within the head
Automatic temperature compensation

Ease of operation
Advanced high-definition color touch
screen provides ease of operation and
visibility. In addition, new auto-setting
algorism enables easy setup.
Maintenance support guide indicates
the resource of the trouble and how to
solve the issue thus reduces downtime.

7
 Network Connection Capabilities

The J Series has the ability to network with other devices.

Printer PC or

Server Internet Server

Checkweigher Dataweigh PC Printer

Recording history and data

The operation history and production data is automati-
cally recorded and transferred to a PC or saved to a USB
stick. This allows manipulation and interrogation of the
data for verification and analysis purposes.

USB memory port

Making use of cumulative production data

Feedback control with Dataweigh Multihead Weigher

Feed back control

When coupled with a Yamato Multihead Weigher, the checkweigher can
feed back exact and actual weight so that the Multihead (Dataweigh)
can adjust its weighing process. This function results in reduced
giveaway and savings in labour costs.

Net Weight Fill Function

Suitable for the case of variable volume bottles

Net weight fill function
Bottle weight input
Checkweigher one weighs the empty container, then the filler inserts the Data management
contents.
Checkweigher two weighs the filled container, calculates the net weight
and feeds back that net weight to the filler for more accurate feeding. Filler

Checkweigher 1 Checkweigher 2

Feedback

8
 J

Small type

CSJ06L ／CSJ06LM
Range:6∼600ｇ
Max accuracy:±0.07ｇ
Max speed:480ppm

■ Standard specification ■ Dimensions (mm)

Model CSJ06L/CE3100 CSJ06LM/CE3100 Checkweigher
Range 6∼600g CSJ06L-00 / CE3100
Minimum graduation 0.05g
*Accuracy (Max.) ±0.07g Infeed conveyor Weigh conveyor
*Speed (Max.) 480ppm
Belt speed 6∼116m/min
Feφ0.4㎜
80㎜ −
SUSφ0.7㎜
Max sensitivity

Pass height

95㎜ − −

Feφ0.45㎜
120㎜ −
SUSφ0.85㎜

125㎜ − −

IP protection class IP30

AC100∼240V±10%, 50/60Hz, AC100∼120, 200∼240V±10%,
Power supply
single phaze 150VA 50/60Hz, single phaze 250VA
Operating environment 0∼40℃ Relatively humidity 30% to 85%, Non-condensing
Program number 300
*Depend on product characteristics.

CSJ06L Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
Width Length Width Length (㎜)
Combination checkweigher and metal detector system
480 330 240 575
CSJ06LM-00 / CE3100
480 440 240 685
350 330 330 665 Metal detector
160 160 conveyor Weigh conveyor
350 440 330 775
260 330 440 775
CSJ06L 260 440 440 885
480 440 240 685
350 330 330 665
350 240 440 240 330 775
260 330 440 775
260 440 440 885
Standard specification

CSJ06LM Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
Width Length Width Length (㎜)

480 240 835

350 160 330 925
260 440 1035
CSJ06LM 240 590
480 240 835
350 240 330 925
260 440 1035
Standard specification

9
 Small type

CSJ22L ／CSJ22LM
Range:20∼2,200ｇ
Max accuracy:±0.2ｇ
Max speed:480ppm

■ Standard specification ■ Dimensions (mm)

Model CSJ22L/CE3100 CSJ22LM/CE3100 Checkweigher
Range 20∼2,200g CSJ22L-00 / CE3100
Minimum graduation 0.1g
*Accuracy (Max.) ±0.2g
Infeed conveyor Weigh conveyor
*Speed (Max.) 480ppm
Belt speed 6∼116m/min
Feφ0.4㎜
80㎜ −
SUSφ0.7㎜
Max sensitivity

Pass height

95㎜ − −

Feφ0.45㎜
120㎜ −
SUSφ0.85㎜

125㎜ − −

IP protection class IP30

AC100∼240V±10%、50/60Hz, AC100∼120, 200∼240V±10%,
Power supply
single phaze 150VA 50/60Hz, single phaze 250VA
Operating environment 0∼40℃ Relatively humidity 30% to 85%, Non-condensing
Program number 300 200
*Depend on product characteristics.

CSJ22L Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
(㎜)
Width Length Width Length
Combination checkweigher and metal detector system
480 440 240 685
CSJ22LM-00 / CE3100
350 330 330 665
350 160 440 160 330 775 Metal detector
conveyor Weigh conveyor
260 330 440 775
260 440 440 885
CSJ22L
480 440 240 685
350 330 330 665
350 240 440 240 330 775
260 330 440 775
260 440 440 885
Standard specification

CSJ22LM Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
(㎜)
Width Length Width Length

480 240 835

350 160 330 925
260 440 1035
CSJ22LM 240 590
480 240 835
350 240 330 925
260 440 1035
Standard specification

10
 J

Small type

CSJ33L ／CSJ33LM
Range:30∼3,300ｇ
Max accuracy:±0.2ｇ（Minimum graduation 0.1g）
±0.3ｇ（Minimum graduation 0.2g）
Max speed:310ppm

■ Standard specification ■ Dimensions (mm)

Model CSJ33L/CE3100 CSJ33LM/CE3100 Checkweigher
Range 30∼3,300g CSJ33L-00 / CE3100
Minimum graduation 0.1g 0.2g 0.1g 0.2g
*Accuracy (Max.) ±0.2g ±0.3g ±0.2g ±0.3g
Infeed conveyor Weigh conveyor
*Speed (Max.) 310ppm 190ppm 310ppm 190ppm
Belt speed 5∼75m/min 5∼76m/min 5∼75m/min 5∼76m/min
Feφ0.4㎜
80㎜ − −
SUSφ0.7㎜
Max sensitivity

Feφ0.45㎜
Pass height

95㎜ − −
SUSφ0.85㎜
Feφ0.45㎜
120㎜ − −
SUSφ0.85㎜
Feφ0.5㎜
125㎜ − −
SUSφ0.9㎜
IP protection class IP30
AC100∼240V±10%, 50/60Hz, AC100∼120, 200∼240V±10%,
Power supply
single phaze 150VA 50/60Hz, single phaze 250VA
Operating environment 0∼40℃ Relatively humidity 30% to 85%, Non-condensing
Program number 300
*Depend on product characteristics.

CSJ33L Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
(㎜)
Width Length Width Length

310 440 240 685

220 330 330 665
220 240 440 240 330 775 Combination checkweigher and metal detector system
170 330 440 775 CSJ33LM-00 / CE3100
170 440 440 885
Metal detector
190 400 400 810 conveyor Weigh conveyor
190 500 400 910
CSJ33L 190 600 400 1010
150 400 500 910
150 320 500 320 500 1010
150 600 500 1110
120 400 600 1010
120 500 600 1110
120 600 600 1210
Standard specification

CSJ33LM Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
Width Length Width Length (㎜)

310 240 840

220 240 590 240 330 930
170 440 1040
CSJ33LM
190 400 1210
150 400 800 320 500 1310
120 600 1410
Standard specification

11
 Medium Type

CMJ06LM
Range:60∼6,000ｇ
Max accuracy:±1.0ｇ
Max speed:150ppm

■ Standard specification ■ Dimensions (mm)

Model CMJ06LM/CE3100 Combination checkweigher and metal detector system
Range 60∼6,000g CMJ06LM / CE3100
Minimum graduation 0.5g Metal detector
conveyor Weigh conveyor
*Accuracy (Max.) ±1.0g
*Speed (Max.) 150ppm
Belt speed 4∼60m/min

80㎜ −
Max sensitivity

Feφ0.45㎜
Pass height

95㎜
SUSφ0.85㎜

120㎜ −

Feφ0.5㎜
125㎜
SUSφ0.9㎜
IP protection class IP30
Power supply AC100∼120, 200∼240V ±10%、50/60Hz, single phaze, 350VA
Operating environment 0∼40℃ Relatively humidity 30% to 85%, Non-condensing
Program number 300
*Depend on product characteristics.

CMJ06LM Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
(㎜)
Width Length Width Length

150 400 1210

120 320 500 1310
100 600 1410
CMJ06LM 400 800
150 400 1210
120 400 500 1310
100 600 1410
Standard specification

12
 J

Medium Type

CMJ12L
Range:60∼12,000ｇ
Max accuracy:±1.0ｇ
Max speed:150ppm

■ Standard specification ■ Dimensions (mm)

Model CMJ12L/CE3100 Checkweigher
Range 60∼12,000g CMJ12L-00 / CE3100
Minimum graduation 0.5g
*Accuracy (Max.) ±1.0g
Infeed conveyor Weigh conveyor
*Speed (Max.) 150ppm
Belt speed 4∼60m/min
IP protection class IP30
Power supply AC100∼240V ±10%, 50/60Hz, single phaze, 250VA
Operating environment 0∼40℃ Relatively humidity 30% to 85%, Non-condensing
Program number 300
*Depend on product characteristics.

CMJ12L Conveyor
Conveyor dimension (㎜)
Machine
Max speed
Model Infeed conveyor Weigh conveyor length
(pcs / min)
(㎜)
Width Length Width Length

150 400 400 810

150 500 400 910
150 600 400 1,010
120 400 500 910
120 320 500 320 500 1,010
120 600 500 1,110
100 400 600 1,010
100 500 600 1,110
CMJ12L 100 600 600 1,210
150 400 400 810
150 500 400 910
150 600 400 1,010
120 400 500 910
120 400 500 400 500 1,010
120 600 500 1,110
100 400 600 1,010
100 500 600 1,110
100 600 600 1,210
Standard specification

13
 Medium Type

CMJ30L
Range:0.3㎏∼30㎏
Max accuracy:±2ｇ
Max speed:50ppm

■ Standard specification ■ Dimensions (mm)

Model CMJ30L/CE3100 Checkweigher
Range 0.3∼30kg CMJ30L / CE3100
Minimum graduation 2g
*Accuracy (Max.) ±2g
Weigh conveyor
*Speed (Max.) 50ppm
Belt speed 2∼31m/min
IP protection class IP30
Power supply AC100∼240V ±10%, 50/60Hz, single phaze, 150VA
Operating environment 0∼40℃ Relatively humidity 30% to 85%, Non-condensing
Program number 300
*Depend on product characteristics.

CMJ30L Conveyor
Conveyor dimension
Model Max speed (pcs / min) Weigh conveyor
Width Length

CMJ30L 50 400 600

Standard specification

■ CMJ30L-2PO (with pusher reject) ■ Dimensions (mm)

Checkweigher Checkweigher
CMJ30L-2P0 / CE3100 CMJ30L-2P0 / CE3100
with pusher reject with pusher reject and pool conveyor

Reject conveyor
Weigh conveyor Reject conveyor Weigh conveyor

Good

Good

Rejected
item
Rejected item

14
 J

Reject devices
■ Diverter reject (air / motor powered)
Rejects the product by diverter CSJ CMJ
arm mechanism - over, under or Model
FJ31660F FJ31660FM(H) FJ32460F(T) FJ32460FM(H) FJ33274F FJ34084F
accept. Ideal for thick products 160㎜ 160㎜ 240㎜ 240㎜ 320㎜ 400㎜
Width
and boxes. Product Length 400㎜ 400㎜ 400㎜ 400㎜ 540㎜ 540㎜
size
(Max.) Height 200㎜ 200㎜ 200㎜ 200㎜ 200㎜ 200㎜
Weight 2,200g 2,200g（1100ｇ） 2,200g（3300ｇ） 2,200g（1100ｇ） 6,000g 6,000g
Speed (Max.) 270ppm 180ppm（220ppm） 200ppm 100ppm（150ppm） 150ppm 130ppm
Air supply 0.4∼0.7MPa, 0.4NL/time − 0.4∼0.7MPa, 0.4NL/time − 0.4∼0.7MPa, 0.4NL/time 0.4∼0.7MPa, 0.4NL/time
Belt speed 6∼116m/min 6∼116m/min 6∼116（5∼76）m/min 6∼116m/min 4∼62m/min 4∼62m/min
Power supply 60VA 155VA 60VA 155VA 60VA 110VA
Good IP protection class IP30

■ Air blast reject CSJ

Uses air to reject the product. Model AJ21624I AJ2(3)2433I
AJ2(3)1633I
Ideal for high speed weighing of AJ2(3)1644I AJ2(3)2444I
small and light products. 160㎜ 240㎜
Width
Product Length 400㎜ 400㎜
size
(Max.) Height 160㎜ 160㎜
Weight 300g 300g
Speed (Max.) 400ppm 400ppm
Air supply 0.4∼0.7MPa, 5NL/time 0.4∼0.7MPa, 5NL/time
Belt speed 6∼116m/min 6∼116m/min
Good Power supply 60VA 60VA
IP protection class IP30

■ Driven drop flap reject CSJ CMJ

Driving drop flap reject system Model SJ21624F SJ22433F(T) SJ23240F SJ24040F
SJ21633F SJ23250F SJ24050F
eliminates excess or short weigh SJ21644F SJ22444F(T) SJ23260F SJ24060F
items from all checked products 160㎜ 240㎜ 320㎜ 400㎜
Width
by conveyor down. Product Length 400㎜ 400㎜ 540㎜ 540㎜
size
(Max.) Height 130㎜ 130㎜ 130㎜ 130㎜
Weight 2,200g 2,200g（3,300g） 3,300g 12,000g
Speed (Max.) 100ppm 100ppm 50ppm 50ppm
Air supply 0.4∼0.7MPa, 2.0NL/time 0.4∼0.7MPa, 2.5NL/time 0.4∼0.7MPa, 3.0NL/time 0.4∼0.7MPa, 3.5NL/time
Belt speed 6∼116m/min （5∼76）
6∼116 m/min 5∼76m/min 4∼60m/min
Power supply 60VA 60VA 60VA 110VA
Good IP protection class IP30

■ Pusher reject CSJ CMJ

The device pushes the product Model PJ21624F PJ22433F(T) PJ23240F PJ24040F
PJ21633F PJ23250F PJ24050F PJ24553F
to reject it from the conveyor. PJ21644F PJ22444F(T) PJ23260F PJ24060F
Suitable for thick products and 160㎜ 240㎜ 320㎜ 400㎜ 400㎜
Width
boxes. Product Length 400㎜ 400㎜ 500㎜ 500㎜ 500㎜
size
(Max.) Height 200㎜ 200㎜ 200㎜ 200㎜ 600㎜
Weight 2,200g 2,200g（3,300g） 3,300g 12,000g 30,000g
Speed (Max.) 180ppm 160ppm 120ppm 100ppm 50ppm
Air supply 0.4∼0.7MPa, 2.0NL/time 0.4∼0.7MPa, 2.5NL/time 0.4∼0.7MPa, 3.0NL/time 0.4∼0.7MPa, 3.5NL/time 0.4∼0.7MPa, 3.5NL/time
Belt speed 6∼116m/min 6∼116（5∼76）m/min 5∼76m/min 4∼60m/min 4∼31m/min
Good Power supply 60VA 60VA 60VA 110VA 60VA
IP protection class IP30

15
In 1966, we introduced the Checkweigher CB3. We have supplied high-performance, robust, and user-friendly Checkweigher
Series units for about 50 years now, while building up a global customer base over that time. Our headquarters are located in
Akashi, Japan, and we have regional offices in the U.S.A., Canada, Germany, the Netherlands, the U.K., France, Russia, China,
India, UAE, Mexico and Thailand. Our worldwide sales network includes representatives in more than 70 countries, and our highly
experienced sales and service staff provides customers everywhere with a high level of expertise and service.

Yamato Spare Parts and Service are subject to the same high demands in quality as the machines themselves.
The listed speed, weight and volume are standard values. Other specifications are also available. Please contact Yamato for details.
This machine is covered by a number of patents worldwide.
All illustrations, specifications, and descriptions are subject to change without notice.

CAT.NO.B0000EN00A00 16050000Ry Printed in Japan