WF101GTYAPLNG0# 第 1 頁，共 7 頁

Winstar Display Co., LTD

華凌光電股份有限公司
WEB: https://www.winstar.com.tw E-mail: sales@winstar.com.tw

SPECIFICATION

MODULE NO.: WF101GTYAPLNG0#

General Specifications
Item Dimension Unit

Screen Diagonal 10.1 inch

Number of Pixels 1280 x 3(R GB) x 800 dots
Module dimension 257.96 x 168.6 x 5.575 mm
Active area 216.96 (H) x 135.6(V) mm
Pixel pitch 0.1695 × 0.1695 mm
Display Mode Normally Black
Pixel Arrangement R.G.B. Vertical Stripe
Backlight Type LED, Normally White
Aspect Ratio 16:9
PCAP FW Version 50
Electrical Interface (Logic) LVDS
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare
*Color tone slight changed by temperature and driving voltage.

WF101GTYAPLNG0# 第 2 頁，共 7 頁
Absolute Maximum Ratings
Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃

Storage Temperature TST -20 － +70 ℃

Electrical Characteristics
Typical Operation Conditions
Values
Item Symbol Unit
Min. Typ. Max.
VDD 2.3 2.5 2.7 V
AVDD 8.0 8.2 8.4 V
Power voltage
VGH 21.7 22 22.3 V
VGL -7.3 -7 -6.7 V
Input signal voltage VCOM 2.7 3.0 3.3 V
Supply Voltage For Touch
VDDT 2.8 － 3.3 V
Logic

WF101GTYAPLNG0# 第 3 頁，共 7 頁
Interface
1. Interface Connector
A 40pin connector is used for the module electronics interface. The recommended model is
F62240-H1210B manufactured by Vigorconn.
Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Power Supply
3 VDD P Power Supply
4 NC - No connection
5 NC - No connection
6 NC - No connection
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 NC - No connection
24 NC - No connection
25 GND P Ground
26 NC - No connection
27 NC - No connection
28 NC - No connection
29 AVDD P Power for Analog Circuit

WF101GTYAPLNG0# 第 4 頁，共 7 頁
 30 GND P Ground
31 LED- P LED Cathode
32 LED- P LED Cathode
33 NC - No connection
34 NC - No connection
35 VGL P Gate OFF Voltage
36 NC - No connection
37 NC - No connection
38 VGH P Gate ON Voltage
39 LED+ P LED Anode
40 LED+ P LED Anode
I: input, O: output, P: Power

2. PCAP PIN Definition

Pin Symbol Function
1 SDA I2C data input and output
2 SCL I2C clock input
3 /RST External Reset, Low is active
4 /INT External interrupt to the host
5 VDDT Power Supply : +3.3V
6 VSS Ground for analog circuit

WF101GTYAPLNG0# 第 5 頁，共 7 頁
Contour Drawing
TP_Outline 257.96
TFT_Outline 229.34±0.2
14.32±0.5
TP_VA 218.00
1 SDA
18.69
18.71 Sensor_AA 217.96 5.575±0.5 2 SCL
9.81±0.5

(14.68) (19.21) TFT_AA 216.96 2.50±0.15

13.98
14.18

3 RST
4 INT
5 VDDT
R GB
6 VSS

1280 X RGB X 800

TFT_Outline 148.98±0.2

TFT_AA 135.60
TP_VA 137.00
Sensor_AA 136.60
TP_Outline 168.60

3.41

5.0

Stiffener Contact side

PIN1 PIN6
0.30±0.05

The non-specified tolerance of dimension is ±0.3 mm .

WF101GTYAPLNG0# 第 6 頁，共 7 頁
 1 VCOM 21 Rxin3+
2 VDD 22 GND
3 VDD 23 NC
4 NC 24 NC
5 NC 25 GND
6 NC 26 NC
7 GND 27 NC
8 Rxin0- 28 NC
9 Rxin0+ 29 AVDD
10 GND 30 GND
11 Rxin1- 31 LED-
12 Rxin1+ 32 LED-
13 GND 33 NC
14 Rxin2- 34 NC
15 Rxin2+ 35 VGL

17.50(PCB)

5.53±0.5
16 GND 36 NC 171.00(PCB) (26.17)
14.00±0.5
17 RxCLK- 37 NC Down side pitch=0.5mm
CN1
Lcm Connector

(20.80)
18 RxCLK+ 38 VGH 40 1

19 GND 39 LED+
20 Rxin3- 40 LED+
55.27±0.5
250.0±1.0

3.50
The non-specified tolerance of dimension is ±0.3 mm .

PIN6 PIN1

W:6*0.30
P:5*0.50=2.50
64.36±0.5 3.50

WF101GTYAPLNG0# 第 7 頁，共 7 頁