FMR53 DS

TI01041F/00/EN/07.
16 Products Solutions Services

71344171
Technical Information
Micropilot FMR53, FMR54
Free space radar
Level measurement in liquids
Application
• Continuous, non-contact level measurement of liquids, pastes and slurries
• Rod antenna (FMR53); horn or planar antenna (FMR54)
• Maximum measuring range: 20 m (66 ft);
for FMR54 with planar antenna in stilling well: 38 m (125 ft)
• Temperature: –196 to +400 °C (–321 to +752 °F)
• Pressure: –1 to +160 bar (–14.5 to +2 320 psi)
• Accuracy: ± 6 mm
• International explosion protection certificates; WHG; marine approvals
• Linearity protocol (3-point, 5-point)
Ihre Vorteile
• Reliable measurement even for changing product and process conditions
• HistoROM data management for easy commissioning, maintenance and
diagnostics
• Highest reliability due to Multi-Echo Tracking
• SIL2 according to IEC 61508, SIL3 in case of homogeneous or heterogeneous
redundancy
• Seamless integration into control or asset management systems
• Intuitive user interface in national languages
• Easy proof test for SIL and WHG
• Heartbeat Technology™
Table of contents
Important document information . . . . . . . . . . . . . . . 4 Degree of protection . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Vibration resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Cleaning the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Electromagnetic compatibility (EMC) . . . . . . . . . . . . . . . 57
Function and system design . . . . . . . . . . . . . . . . . . . 6
Measuring principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Process temperature, Process pressure . . . . . . . . . . . . . . 58
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dielectric constant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Measured variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Measuring range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mechanical construction . . . . . . . . . . . . . . . . . . . . 61
Transmitting power . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Materials: GT18 housing (stainless steel, corrosion-
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
resistant) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Output signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Materials: GT19 housing (plastic) . . . . . . . . . . . . . . . . . . 70
Signal on alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Materials: GT20 housing (die-cast aluminum, powder-
Linearization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
coated, seawater-resistant) . . . . . . . . . . . . . . . . . . . . . . 71
Galvanic isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Materials: Antenna and process connection . . . . . . . . . . . 72
Protocol-specific data . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Materials: Weather protection cover . . . . . . . . . . . . . . . . 75
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Operability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Terminal assignment . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Operating concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Device plug connectors . . . . . . . . . . . . . . . . . . . . . . . . . 25
Local operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Operation with remote display and operating module
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FHX50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Remote operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Power supply failure . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Integration in tank gauging system . . . . . . . . . . . . . . . . . 81
Potential equalization . . . . . . . . . . . . . . . . . . . . . . . . . 29
System integration via Fieldgate . . . . . . . . . . . . . . . . . . . 82
Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cable entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cable specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Certificates and approvals . . . . . . . . . . . . . . . . . . . 83
Overvoltage protection . . . . . . . . . . . . . . . . . . . . . . . . . 30 CE mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
RCM-Tick marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Performance characteristics . . . . . . . . . . . . . . . . . . 31
Ex approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Reference operating conditions . . . . . . . . . . . . . . . . . . . 31
Dual seal according to ANSI/ISA 12.27.01 . . . . . . . . . . . . 83
Maximum measured error . . . . . . . . . . . . . . . . . . . . . . . 31
Functional Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Measured value resolution . . . . . . . . . . . . . . . . . . . . . . 31
WHG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Reaction time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Sanitary compatibility . . . . . . . . . . . . . . . . . . . . . . . . . 83
Influence of ambient temperature . . . . . . . . . . . . . . . . . 31
NACE MR 0175 / ISO 15156 . . . . . . . . . . . . . . . . . . . . . 83
Influence of gas layer . . . . . . . . . . . . . . . . . . . . . . . . . . 31
NACE MR 0103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Gas phase compensation with external pressure sensor
Pressure equipment with allowable pressure
(PROFIBUS PA, FOUNDATION Fieldbus) . . . . . . . . . . . . . 32
≤ 200 bar (2 900 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Marine certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Radio standard EN302372-1/2 . . . . . . . . . . . . . . . . . . . 84
Installation conditions . . . . . . . . . . . . . . . . . . . . . . . . . 33 FCC / Industry Canada . . . . . . . . . . . . . . . . . . . . . . . . . 84
Measuring conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Japanese radio approval . . . . . . . . . . . . . . . . . . . . . . . . 84
Mounting cladded flanges . . . . . . . . . . . . . . . . . . . . . . . 37 CRN approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Installation in vessel (free space) . . . . . . . . . . . . . . . . . . 38 Track record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Installation in stilling well . . . . . . . . . . . . . . . . . . . . . . . 41 Test, Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Installation in bypass . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Product documentation on paper . . . . . . . . . . . . . . . . . . 86
Vessels with heat insulation . . . . . . . . . . . . . . . . . . . . . 46 Other standards and guidelines . . . . . . . . . . . . . . . . . . . 87
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Ordering information . . . . . . . . . . . . . . . . . . . . . . . 88

Ambient temperature range . . . . . . . . . . . . . . . . . . . . . 47 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Ambient temperature limits . . . . . . . . . . . . . . . . . . . . . 47 3-point linearity protocol . . . . . . . . . . . . . . . . . . . . . . . 89
Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 56 5-point linearity protocol . . . . . . . . . . . . . . . . . . . . . . . 90
Climate class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Customized parametrization . . . . . . . . . . . . . . . . . . . . . 91
Altitude according to IEC61010-1 Ed.3 . . . . . . . . . . . . . . 57 Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2 Endress+Hauser
Application Packages . . . . . . . . . . . . . . . . . . . . . . . 92
Heartbeat Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . 92
Heartbeat Verification . . . . . . . . . . . . . . . . . . . . . . . . . 93
Heartbeat Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . 94
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Device-specific accessories . . . . . . . . . . . . . . . . . . . . . . 95
Communication-specific accessories . . . . . . . . . . . . . . . . 99
Service-specific accessories . . . . . . . . . . . . . . . . . . . . . 100
System components . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Standard documentation . . . . . . . . . . . . . . . . . . . . . . . 101
Supplementary documentation . . . . . . . . . . . . . . . . . . . 101
Safety Instructions (XA) . . . . . . . . . . . . . . . . . . . . . . . 101
Registered trademarks . . . . . . . . . . . . . . . . . . . . . 105
Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Endress+Hauser 3
Important document information

Symbols Safety symbols
Symbol Meaning
DANGER!
DANGER This symbol alerts you to a dangerous situation. Failure to avoid this situation will
result in serious or fatal injury.
WARNING!
WARNING This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in serious or fatal injury.
CAUTION!
CAUTION This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in minor or medium injury.
NOTE!
NOTICE This symbol contains information on procedures and other facts which do not result in
personal injury.
Electrical symbols
Symbol Meaning
Direct current
Alternating current
Direct current and alternating current
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a
grounding system.
Protective ground connection

A terminal which must be connected to ground prior to establishing any other
connections.
Equipotential connection
A connection that has to be connected to the plant grounding system: This may be a
potential equalization line or a star grounding system depending on national or
company codes of practice.
Symbols for certain types of information
Symbol Meaning
Permitted
Procedures, processes or actions that are permitted.
Preferred
Procedures, processes or actions that are preferred.
Forbidden
Procedures, processes or actions that are forbidden.
Tip
Indicates additional information.
Reference to documentation
A Reference to page
Reference to graphic
Visual inspection
4 Endress+Hauser
Symbols in graphics
Symbol Meaning
1, 2, 3 ... Item numbers
1. , 2. , 3. … Series of steps
A, B, C, ... Views
A-A, B-B, C-C, ... Sections
Hazardous area
- Indicates a hazardous area.
Safe area (non-hazardous area)

. Indicates the non-hazardous area.
Symbols at the device
Symbol Meaning
Safety instructions
Observe the safety instructions contained in the associated Operating Instructions.
Temperature resistance of the connection cables

Specifies the minimum value of the temperature resistance of the connection cables.
Endress+Hauser 5
Function and system design

Measuring principle The Micropilot is a "downward-looking" measuring system, operating based on the time-of-flight
method (ToF). It measures the distance from the reference point (process connection) to the product
surface. Radar impulses are emitted by an antenna, reflected off the product surface and received
again by the radar system.
D
100%
F
L
0%
A0017871
1 Setup parameters of the Micropilot

R Reference point of the measurement (lower edge of the flange or threaded connection)
E Empty calibration ( = zero)
F Full calibration (= span)
D Measured distance
L Level (L = E - D)
Input
The reflected radar impulses are received by the antenna and transmitted into the electronics. A
microprocessor evaluates the signal and identifies the level echo caused by the reflection of the radar
impulse at the product surface. The unambiguous signal identification is accomplished by the
PulseMaster® eXact software together with the Multi-echo tracking algorithms, based on many
years of experience with time-of-flight technology.
The distance D to the product surface is proportional to the time of flight t of the impulse:
D = c · t/2,
with c being the speed of light.
Based on the known empty distance E, the level L is calculated:
L=E–D
The reference point R of the measurement is located at the process connection. For details see the
dimensional drawing:
• FMR53: →  62
• FMR54: →  65
The Micropilot is equipped with functions to suppress interference echoes. The user can activate
these functions. Together with the multi-echo tracking algorithms they ensure that interference
echoes (i.e. from edges and weld seams) are not interpreted as level echo.
6 Endress+Hauser
Output
The Micropilot is commissioned by entering an empty distance "E" (=zero), a full distance "F" (=span)
and application parameters which automatically adapt the instrument to the process conditions. For
models with a current output, the factory adjustment for zero point "E" and span "F" is 4 mA and 20
mA. For digital outputs and the display module, the factory adjustment for zero point "E" and span "F"
is 0 % and 100 %.
A linearization with max. 32 points, based on a table entered either manually or semi-automatically,
can be activated locally or remotely. This function provides a measurement in engineering units and
a linear output signal for spheres, horizontal cylindrical tanks and vessels with conical outlet.
Life cycle of the product

Engineering
• Universal measuring principle
• Measurement unaffected by medium properties
• Hardware and software developed according to SIL IEC 61508
Procurement
• Endress+Hauser being the world market leader in level measurement guarantees asset protection
• Worldwide support and service
Installation
• Special tools are not required
• Reverse polarity protection
• Modern, detachable terminals
• Main electronics protected by a separate connection compartment
Commissioning
• Fast, menu-guided commissioning in only a few steps on site or from the control room
• Plain text display in national languages reduces the risk of error or confusion
• Direct local access of all parameters
• Short instruction manual at the device
Operation
• Multi-echo tracking: Reliable measurement through self-learning echo-search algorithms taking
into account the short-term and long-term history in order to check the found echoes for
plausibility and to suppress interference echoes.
• Diagnostics in accordance with NAMUR NE107
Maintenance
• HistoROM: Data backup for instrument settings and measured values
• Exact instrument and process diagnosis to assist fast decisions with clear details concerning
remedies
• Intuitive, menu-guided operating concept in national languages saves costs for training,
maintenance and operation
• Cover of the electronics compartment can be opened in hazardous areas
Retirement
• Order code translation for subsequent models
• RoHS-conforming (Restriction of certain Hazardous Substances), unleaded soldering of electronic
components
• Environmentally sound recycling concept
Endress+Hauser 7
Input
Measured variable The measured variable is the distance between the reference point and the product surface.
The level is calculated from this distance, taking into account the empty distance "E" entered by the
user.
If required, the level can be converted into other variables (volume, mass) by means of a linearization
(up to 32 points).
Measuring range Maximum measuring range
Device Maximum measuring range
FMR53 20 m (66 ft)
FMR54 - horn antenna 20 m (66 ft)
FMR54 - planar antenna in stilling well 38 m (125 ft)
Usable measuring range

The usable measuring range depends on the size of the antenna, the reflectivity of the medium, the
mounting location and eventual interference reflections.
The following tables describe the groups of media as well as the achievable measuring range as a
function of application and media group. If the dielectric constant of a medium is unknown, it is
recommended to assume media group B to ensure a reliable measurement.
Media groups
Media groups DC (εr) Example
A 1.4 to 1.9 non-conducting liquids, e.g. liquefied gas 1)
B 1.9 to 4 non-conducting liquids, e.g. benzene, oil, toluene, …
C 4 to 10 e.g. concentrated acids, organic solvents, esters, aniline, alcohol, acetone, …
D > 10 conducting liquids, e.g. aqueous solutions, dilute acids and alkalis
1) Treat Ammonia NH3 as a medium of group A.
For dielectric constants (DC values) of many media commonly used in various industries refer
to:
• the Endress+Hauser DC manual (CP01076F)
• the Endress+Hauser "DC Values App" (available for Android and iOS)
8 Endress+Hauser
Device Storage tank Buffer tank
A0018833
A0018835
Calm product surface (e.g. intermittent filling, filling from bottom,

Moving surfaces (e.g. continuous filling, from above, mixing
immersion tubes)
jets)
Antenna type and size Antenna type and size
FMR53 Rod 390 mm (15 in) - Rod 390 mm (15 in) -

Rod 540 mm (21 in) Rod 540 mm (21 in)
FMR54 1) Horn 150 mm (6 in) Horn 200 mm (8 in) Horn 150 mm (6 in) Horn 200 mm (8 in)
Horn 250 mm (10 in) Horn 250 mm (10 in)
B C D B C D B C D B C D
5
(16)
7.5 7.5
(25) (25)
10 10 10
(33) (33) (33)
12.5
A0018846
(41)
15 15
A0018847
(49) (49)
20 20 20
(66) (66) (66)
A0018844 A0018845
Measuring range [m (ft)]
1) FMR54 with the antenna version BC (80mm/3") and BD: (100mm/4") should not be mounted directly in the tank. They are only suited for
bypasses or stilling wells.
Endress+Hauser 9
Device Process tank with agitator Stilling well Bypass
A0018840
A0018839
A0018837
Turbulent surface (e.g. filling from above,

agitators, baffles)
A Antenna type and size

Antenna type and size
FMR53 Rod - - - -
390 mm (15 in)
Rod
540 mm (21 in)
FMR54 Horn Horn 200 mm (8 in) Horn Planar Horn

150 mm (6 in) Horn 250 mm (10 in) 80 to 250 mm (3 to 10 in) 150 to 300 mm 80 to 250 mm (3 to 10 in)
(6 to 12 in)
B C D B C D A, B, C, D A, B, C, D C, D
4
(13) 6 6
(20) 8 (20) 8
(26) (26)
10
A0018848 (33)
A0018850
20 20
(66) (66)
A0018851 A0018852
38
(125)
A0018854
Measuring range [m (ft)]
10 Endress+Hauser
Operating frequency C-band (~ 6 GHz)

Up to 8 Micropilot transmitters can be installed in the same tank because the transmitter pulses are
statistically coded.
Transmitting power Distance Average energy density in beam direction
1 m (3.3 ft) < 12 nW/cm2
5 m (16 ft) < 0.4 nW/cm2
Endress+Hauser 11
Output
Output signal HART
Signal coding FSK ±0.5 mA over current signal
Data transmission rate 1 200 Bit/s
Galvanic isolation Yes
PROFIBUS PA
Signal coding Manchester Bus Powered (MBP)
Data transmission rate 31.25 kBit/s, voltage mode
FOUNDATION Fieldbus
Signal coding Manchester Bus Powered (MBP)
Data transmission rate 31.25 kBit/s, voltage mode
Switch output
For HART devices, the switch output is available as an option. See product structure, feature 20:
"Power Supply, Output", option B: "2-wire; 4-20mA HART, switch output"
Devices with PROFIBUS PA and FOUNDATION Fieldbus always have a switch output.
Switch output
Function Open collector switching output
Switching behavior Binary (conductive or non-conductive), switches when the programmable switch
point is reached
Failure mode non-conductive
Electrical connection U = 10.4 to 35 VDC, I = 0 to 40 mA

values
Internal resistance RI < 880 Ω

The voltage drop at this internal resistance has to be taken into account on
planning the configuration. For example, the resulting voltage at a connected
relay must be sufficient to switch the relay.
Insulation voltage floating, Insulation voltage 1 350 VDC to power supply aund 500 VAC to ground
Switch point freely programmable, separately for switch-on and switch-off point
Switching delay freely programmable from 0 to 100 s, separately for switch-on and switch-off
point
Number of switching cycles corresponds to the measuring cycle
Signal source • Level linearized

device variables • Distance
• Terminal voltage
• Electronic temperature
• Relative echo amplitude
• Diagnostic values, Advanced diagnostics
Number of switching cycles unlimited
12 Endress+Hauser
Signal on alarm Depending on the interface, failure information is displayed as follows:

• Current output (for HART devices)
– Failsafe mode selectable (in accordance with NAMUR Recommendation NE 43):
Minimum alarm: 3.6 mA
Maximum alarm (= factory setting): 22 mA
– Failsafe mode with user-selectable value: 3.59 to 22.5 mA
• Local display
– Status signal (in accordance with NAMUR Recommendation NE 107)
– Plain text display
• Operating tool via digital communication (HART, PROFIBUS PA, FOUNDATION Fieldbus) or
service interface (CDI)
– Status signal (in accordance with NAMUR Recommendation NE 107)
– Plain text display
Linearization The linearization function of the device allows the conversion of the measured value into any unit of
length or volume. Linearization tables for calculating the volume in cylindrical tanks are pre-
programmed. Other linearization tables of up to 32 value pairs can be entered manually or semi-
automatically.
Galvanic isolation All circuits for the outputs are galvanically isolated from each other.
Protocol-specific data HART
Manufacturer ID 17 (0x11)
Device type ID 0x1128
HART specification 7.0
Device description files (DTM, DD) Information and files under:

• www.endress.com
• www.hartcomm.org
HART load min. 250 Ω
HART device variables The measured values can be freely assigned to the device variables.
Measured values for PV (primary variable)
• Level linearized
• Distance
• Area of incoupling
• Analog output adv. diagnostics 1
Measured values for SV, TV, FV (second, third and fourth variable)
• Distance
• Absolute echo amplitude
• Area of incoupling
Supported functions • Burst mode

• Additional transmitter status
Wireless HART data
Minimum start-up voltage 16 V
Start-up current 3.6 mA
Start-up time 40 s
Minimum operating voltage 12.3 V
Endress+Hauser 13
Multidrop current 3.6 mA
Set-up time 1s
PROFIBUS PA
Manufacturer ID 17 (0x11)
Ident number 0x1559
Profile version 3.02
GSD file Information and files under:

• www.endress.com
GSD file version • www.profibus.org
Output values Analog Input:

• Distance
• Absolute echo amplitude
Digital Input:
• Digital output AD 1
• Digital output AD 2
• Switch output
Input values Analog Output:

• Analog value from PLC (for sensor block external pressure to compensate gas phase
effects)
• Analog value from PLC to be indicated on the display
Digital Output:
• Extended diagnostic block
• Level limiter
• Sensor block measurement on
• Sensor block save history on
• Status output
Supported functions • Identification & Maintenance

Einfachste Geräteidentifizierung seitens des Leitsystems und des Typenschildes
• Automatic Ident Number Adoption
GSD compatibility mode with respect to the preceding product Micropilot M FMR2xx
• Physical Layer Diagnostics
Installation check of the PRFIBUS segment and the Micropilot FMR5x via the terminal
voltage and telegram surveillance.
• PROFIBUS Up-/Download
Up to 10 times faster writing and reading of parameters via PROFIBUS up-/download
• Condensed Status
Simple and self-explanatory diagnostic information by categorization of occurring
diagnostic messages.
FOUNDATION Fieldbus
Manufacturer ID 0x452B48
Device type 0x1028
Device Revision 0x01
DD Revision Information and files can be found:

• www.endress.com
CFF Revision • www.fieldbus.org
Device Tester Version (ITK Version) 6.0.1
ITK Test Campaign Number IT085300
Link Master (LAS) capable yes
14 Endress+Hauser
Link Master / Basic Device selectable yes; default: Basic Device
Node address Default: 247 (0xF7)
Features supported Following methods are supported:

• Restart
• ENP Restart
• Setup
• Linearization
• Self Check
Virtual Communication Relationships (VCRs)
Number of VCRs 44
Number of Link Objects in VFD 50
Permanent entries 1
Client VCRs 0
Server VCRs 10
Source VCRs 43
Sink VCRs 0
Subscriber VCRs 43
Publisher VCRs 43
Device Link Capabilities
Slot time 4
Min. inter PDU delay 8
Max. response delay 20
Transducer Blocks
Block Content Output values
Setup Transducer Block Contains all parameters for a standard commissioning • Level or volume 1)
procedure (Channel 1)
• Distance (Channel 2)
Advanced Setup Contains all parameters for a more detailed no output values
Transducer Block configuration of the device
Display Transducer Block Contains all parameters for the configuration of the no output values
display module
Diagnostic Transducer Contains diagnostic information no output values

Block
Advanced Diagnostic Contains parameters for the Advanced Diagnostic no output values
Transducer Block
Expert Configuration Contains parameters which require detailed knowledge no output values
Transducer Block of the functionalities of the device
Expert Information Contains information about the state of the device no output values
Transducer Block
Service Sensor Transducer Contains parameters which can only be operated by no output values
Block Endress+Hauser service personnel
Service Information Contains information on the state of device which is no output values
Transducer Block relevant for service operations
Data Transfer Transducer Contains parameters which allow to backup the device no output values
Block configuration in the display module and to restore it
into the device. Access to these parameters is restricted
to the Endress+Hauser service.
1) depending on the configuration of the block
Endress+Hauser 15
Function Blocks
Block Content Number of Number of Execution Functionality
permanent instantiable time
blocks blocks
Resource Block The Resource Block contains all the 1 0 - enhanced

data that uniquely identifies the
field device. It is an electronic
version of a nameplate of the
device.
Analog Input The AI block takes the 2 3 25 ms enhanced

Block manufacturer's input data, selected
by channel number, and makes it
available to other function blocks at
its output.
Discrete Input The DI block takes a discrete input 1 2 20 ms standard

Block value (e.g. indication of an level
limit), and makes it available to
other function blocks at its output.
Mutiple This block is used to transfer analog 1 0 20 ms standard

Analog Output data from the bus into the device
Block
Mutiple This block is used to transfer 1 0 20 ms standard

Discrete discrete data from the bus to the
Output Block device.
PID Block The PID block serves as 1 1 25 ms standard

proportional-integralderivative
controller and is used almost
universally to do closed-loop-
control in the field including
cascade and feedforward.
Arithmetic This block is designed to permit 1 1 25 ms standard

Block simple use of popular measurement
math functions. The user does not
have to know how to write
equations. The math algorithm is
selected by name, chosen by the
user for the function to be done.
Signal The signal characterizer block has 1 1 25 ms standard

Characterizer two sections, each with an output
Block that is a non-linear function of the
respective input. The non-linear
function is determined by a single
look-up table with 21 arbitrary x-y
pairs.
Input Selector The input selector block provides 1 1 25 ms standard

Block selection of up to four inputs and
generates an output based on the
configured action. This block
normally receives its inputs from AI
blocks. The block performs
maximum, minimum, middle,
average and ‘first good’ signal
selection.
16 Endress+Hauser
Block Content Number of Number of Execution Functionality

permanent instantiable time
blocks blocks
Integrator The Integrator Function Block 1 1 25 ms standard

Block integrates a variable as a function
of the time or accumulates the
counts from a Pulse Input block.
The block may be used as a
totalizer that counts up until reset
or as a batch totalizer that has a
setpoint, where the integrated or
accumulated value is compared to
pre-trip and trip settings,
generating discrete signals when
these settings are reached.
Analog Alarm 1 1 25 ms standard

Block
Up to 20 blocks can be instantiated in the device altogether, including the blocks already
instantiated on delivery.
Endress+Hauser 17
Power supply
Terminal assignment 2-wire: 4-20mA HART
! 2- w
4-2 ire le
0 vel
HA mA
[21 RT
4-2
0m
A ]
ope
A
n Sp
a
711 re pa
HA 20mA
08x rt
xx
RT
4...
+
1 -
1 2 4 5 6
mm
2
10
+ +
–
–
# 4...20 mA
3 B
7 +
1-c 1 -
1 2 4 5 han
nel 4-2 2
ove 0m
[16
] rvo A
ltag
e pro
tec
tion
+ +
–
–
# 4...20 mA
3
A0011294
2 Terminal assignment 2-wire; 4-20mA HART

A Without integrated overvoltage protection
B With integrated overvoltage protection
1 Active barrier with power supply (e.g. RN221N): Observe terminal voltage
2 HART communication resistor (≥ 250 Ω): Observe maximum load
3 Connection for Commubox FXA195 or FieldXpert SFX350/SFX370 (via VIATOR Bluetooth modem)
4 Analog display device: Observe maximum load
5 Cable screen; observe cable specification
6 4-20mA HART (passive): Terminals 1 and 2
7 Overvoltage protection module
8 Terminal for potential equalization line
9 Cable entry
18 Endress+Hauser
2-wire: 4-20mA HART, switch output
10
9
8
% 2- w
4-2 ire
0
HA mA
[02 RT
PF
S
A /03
] ope
n Sp
a
711 re pa
HA 20 mA
08x rt
3+ ++ xx
31 --
RT
4...
42 +
7
1 -
mm
2 6
4-
10
+ +
–
-
≥250 Ω 4...20 mA
$
1 2 3 4 5 B
3+ 11 +
3 -
4-2 4
0m +
2-c
A / 1 -
han 4-2 2
4- [17
n el o
v erv FIE 0mA
] olta LD /
ge BU
pro S
tec
tion
+ +
–
-
≥250 Ω 4...20 mA
$
1 2 3 4 5
A0013759
3 Terminal assignment 2-wire; 4-20mA HART, switch output

1 Active barrier with power supply (e.g. RN221N): Observe terminal voltage
6 4-20mA HART (passive): Terminals 1 and 2
7 Switch output (open collector): Terminals 3 and 4
9 Cable entry for 4-20mA HART line
10 Cable entry for switch output line
Endress+Hauser 19
2-wire: 4-20mA HART, 4-20mA
14
13
12
# 2- w
4-2 ire le
0 v el
HA mA
[04 RT
4-2
0m
A /05
]
A
ope
A
n
20m
Sp
a
711 re pa
HA 20mA
08x rt
xx
+
4...
3 -
RT
11
4...
4 +
1 -
mm
2
+ +
10
1 " –
-
4...20 mA
9 8 4
+ +
2 " –
-
4...20 mA
3 5 6 7 4
B
+ +
1 " –
- +
3 -
4...20 mA 4-2 4
10 0m +
9 8 4 2-c
A / 1 -
han
nel 4- 2
[17
ove FIE 20mA
] rvo LD /
ltag
ep
B U
ro S
tec
tion
+ +
2 " –
-
4...20 mA
3 5 6 7 4
A0013923
4 Terminal assignment 2-wire, 4-20 mA HART, 4...20mA

1 Connection current output 2
2 Connection current output 1
3 Supply voltage for current output 1 (e.g. RN221N); Observe terminal voltage
7 Analog display device ; observe maximum load
8 Analog display device ; observe maximum load
9 Supply voltage for current output 2 (e.g. RN221N); Obeserve terminal voltage
11 Current output 2: Terminals 3 and 4
12 Terminal for the potential equalization line
13 Cable entry for current output 1
14 Cable entry for current output 2
This version is also suited for single-channel operation. In this case, current output 1 (terminals
1 and 2) must be used.
20 Endress+Hauser
4-wire: 4-20mA HART (10.4 to 48 VDC)
13
12
11
! 2- w
4-2 ire
0
HA mA
[08 RT
A ]
V=
ope
48
n Sp
4...
a
711 re pa
HA 20 mA
08x rt
10.
L+ xx
1 L-
RT
4...
2 +
10 9
3 -
mm
4 8
10
7
+ !
-
≥250 Ω 4...20 mA
6
1 2 3 4 5
A0011340
5 Terminal assignment 4-wire; 4-20mA HART (10.4 to 48 VDC)
1 Evaluation unit, e.g. PLC

5 Signal cable including screening (if required), observe cable specification
6 Protective connection; do not disconnect!
7 Protective earth, observe cable specification
8 4...20mA HART (active): Terminals 3 and 4
9 Supply voltage: Terminals 1 and 2
10 Supply voltage: Observe terminal voltage, observe cable specification
11 Terminal for potential equalization
12 Cable entry for signal line
13 Cable entry for power supply
Endress+Hauser 21
4-wire: 4-20mA HART (90 to 253 VAC)
13
12
11
! 2- w
4-2 ire
0
HA mA
[09 RT
A ]
~
3V
ope
n
..25
Sp
a
711 re pa
HA 20 mA
90.
08x rt
xx
L
1 N
RT
4...
2 +
10 9
3 -
mm
4 8
10
7
+ !
-
≥250 Ω 4...20 mA
6
1 2 3 4 5
A0018965
6 Terminal assignment 4-wire; 4-20mA HART (90 to 253 VAC)
1 Evaluation unit, e.g. PLC

5 Signal cable including screening (if required), observe cable specification
6 Protective connection; do not disconnect!
7 Protective earth, observe cable specification
8 4...20mA HART (active): Terminals 3 and 4
9 Supply voltage: Terminals 1 and 2
10 Supply voltage: Observe terminal voltage, observe cable specification
11 Terminal for potential equalization
12 Cable entry for signal line
13 Cable entry for power supply
LCAUTION
To ensure electrical safety:
‣ Do not disconnect the protective connection (6).
‣ Disconnect the supply voltage before disconnecting the protective earth (7).
Connect protective earth to the internal ground terminal (7) before connecting the supply
voltage. If necessary, connect the potential matching line to the external ground terminal (11).
In order to ensure electromagnetic compatibility (EMC): Do not only ground the device via the
protective earth conductor of the supply cable. Instead, the functional grounding must also be
connected to the process connection (flange or threaded connection) or to the external ground
terminal.
An easily accessible power switch must be installed in the proximity of the device. The power
switch must be marked as a disconnector for the device (IEC/EN61010).
22 Endress+Hauser
PROFIBUS PA / FOUNDATION Fieldbus
! 2-
F4IEwire
-20L lev
mD
ABU el
P
FAIE/F S
26/ LD
[0 F B PFS
A 07]
2 U S
op en Sp
a
7110 re pa
S
0283x4 rt
BU
3+ ++ x5x7
/LFDF
31 --
PIAE
42 +
F
2
1 2-
mm
4-
10
3
1
B
3+ 6 +
3 -
4-2 4
0m +
2-c
A/ 1 -
han
nel 4-2 2
4- [17
o ver F IEL 0m
A
] volt
age DB /
1 pro
tec
US
tion
A0011341
7 Terminal assignment PROFIBUS PA / FOUNDATION Fieldbus

1 Cable screen: Observe cable specifications
2 Switch output (open collector): Terminals 3 and 4
3 PROFIBUS PA / FOUNDATION Fieldbus: Terminals 1 and 2
5 Cable entries
Endress+Hauser 23
Connection examples for the switch output

For HART devices, the switch output is available as an option. See product structure, feature 20:
"Power Supply, Output", option B: "2-wire; 4-20mA HART, switch output"
Devices with PROFIBUS PA and FOUNDATION Fieldbus always have a switch output.
+
3+ 1
2
+ 3+
-
4-
A0015909
4-
8 Connection of a relay A0015910
9 Connection of a digital input

Suitable relays (examples):
• Solid-state relay: Phoenix Contact OV-24DC/480AC/5 with mounting 1 Pull-up resistor
rail connector UMK-1 OM-R/AMS 2 Digital input
• Electromechanical relay: Phoenix Contact PLC-RSC-12DC/21
For optimum interference immunity we recommend to connect an external resistor (internal

resistance of the relay or Pull-up resistor) of < 1 000 Ω.
24 Endress+Hauser
Device plug connectors For the versions with fieldbus plug connector (M12 or 7/8"), the signal line can be connected
without opening the housing.
Pin assignment of the M12 plug connector

Pin Meaning
4 3 1 Signal +
2 not connected
1 2 3 Signal -
A0011175
4 Ground
Pin assignment of the 7/8" plug connector

Pin Meaning
1 3 1 Signal -
2 Signal +
2 4 3 Not connected
A0011176
4 Screen
Endress+Hauser 25
Supply voltage An external power supply is required.

Various supply units can be ordered from Endress+Hauser: see "Accessories" section →  100
2-wire, 4-20mA HART, passive
"Power Supply, Output" 1) "Approval" 2) Terminal voltage U at the Maximum load R, depending on the supply voltage U0 at the
device supply unit
A: 2-wire; 4-20mA HART • Non-Ex 10.4 to 35 V 3) R [?]

• Ex nA
• Ex ic 500
• CSA GP
Ex ia / IS 10.4 to 30 V 3)
0
10 20 30 35 U0 [V]
10.4 21.4
A0017140
4)
• Ex d(ia) / XP 12 to 35 V R [W]
• Ex ic(ia)
• Ex nA(ia) 500
• Ex ta / DIP

Ex ia + Ex d(ia) / IS + XP 12 to 30 V 4)
0
10 20 30 35 U0 [V]
12 23
A0019136
1) Feature 020 of the product structure

3) For ambient temperatures Ta≤ -20 °C (-4 °F) a minimum voltage of 15 V is required for the sartup of the device at the MIN error current (3,6
mA). The startup current can be parametrized. If the device is operated with a fixed current I ≥ 5,5 mA (HART multidrop mode), a voltage of U ≥
10,4 V is sufficient throughout the entire range of ambient temperatures.
4) For ambient temperatures Ta≤ -20 °C (-4 °F) a minimum voltage of 16 V is required for the startup of the device at the MIN error current (3.6
mA).
"Power Supply, Output" 1) "Approval" 2) Terminal voltage U Maximum load R, depending on the supply voltage U0 at the
at the device supply unit
B: 2-wire; 4-20 mA HART, • Non-Ex 12 to 35 V 3) R [W]

switch output • Ex nA
• Ex nA(ia) 500
• Ex ic
• Ex ic(ia)
• Ex d(ia) / XP
• Ex ta / DIP
• CSA GP
• Ex ia / IS 12 to 30 V 3)
0
• Ex ia + Ex d(ia) / IS + XP
10 20 30 35 U0 [V]
12 23
A0019136

mA).
26 Endress+Hauser
"Power Supply, Output" 1) "Approval" 2) Terminal voltage U at the Maximum load R, depending on the supply voltage U0 at the
device supply unit
C: 2-wire; 4-20mA HART, any 12 to 30 V 3) R [?]

4-20mA
500
0
10 20 30 U0 [V]
12 23
A0017055

mA).
Polarity reversal Yes

protection
Admissible residual ripple USS < 1 V

at f = 0 to 100 Hz
Admissible residual ripple USS < 10 mV

at f = 100 to 10000 Hz
Endress+Hauser 27
4-wire, 4-20mA HART, active
"Power supply; Output" 1) Terminal voltage Maximum load

Rmax
K: 4-wire 90-253VAC; 4-20mA HART 90 to 253 VAC (50 to 60 Hz), 500 Ω

overvoltage category II
L: 4-wire 10,4-48VDC; 4-20mA HART 10.4 to 48 VDC
PROFIBUS PA, FOUNDATION Fieldbus
"Power supply; Output" 1) "Approval" 2) Terminal voltage

3)
E: 2-wire; FOUNDATION Fieldbus, switch output • Non-Ex 9 to 32 V
G: 2-wire; PROFIBUS PA, switch output • Ex nA
• Ex nA(ia)
• Ex ic
• Ex ic(ia)
• Ex d(ia) / XP
• Ex ta / DIP
• CSA GP
3)
• Ex ia / IS 9 to 30 V
• Ex ia + Ex d(ia) / IS + XP

3) Input voltages up to 35 V will not spoil the device.
Polarity sensitive No
FISCO/FNICO compliant Yes

according to IEC 60079-27
Power consumption "Power supply; Output" 1) Power consumption
A: 2-wire; 4-20mA HART < 0.9 W
B: 2-wire; 4-20mA HART, switch output < 0.9 W
C: 2-wire; 4-20mA HART, 4-20mA < 2 x 0.7 W
K: 4-wire 90-253VAC; 4-20mA HART 6 VA
L: 4-wire 10,4-48VDC; 4-20mA HART 1.3 W
Current consumption HART
Nominal current 3.6 to 22 mA, the start-up current for multidrop mode can be parametrized (is
set to 3.6 mA on delivery)
Breakdown signal adjustable: 3.59 to 22.5 mA

(NAMUR NE43)
PROFIBUS PA
Nominal current 14 mA
Error current FDE (Fault 0 mA

Disconnection Electronic)
28 Endress+Hauser
FOUNDATION Fieldbus
Device basic current 15 mA
Error current FDE (Fault 0 mA

Disconnection Electronic)
FISCO
Ui 17.5 V
Ii 550 mA
Pi 5.5 W
Ci 5 nF
Li 10 μH
Power supply failure • Configuration is retained in the HistoROM (EEPROM).

• Error messages (incl. value of operated hours counter) are stored.
Potential equalization No special measures for potential equalization are required.

If the device is designed for hazardous areas, observe the information in the documentation
"Safety Instructions" (XA).
Terminals • Without integrated overvoltage protection

Plug-in spring terminals for wire cross-sections 0.5 to 2.5 mm2 (20 to 14 AWG)
• With integrated overvoltage protection
Screw terminals for wire cross-sections 0.2 to 2.5 mm2 (24 to 14 AWG)
Cable entries Connection of power supply and signal line

To be selected in feature 050 "Electrical connection"
• Gland M20; Material dependent on the approval:
– For Non-Ex, ATEX, IECEx, NEPSI Ex ia/ic:
Plastics M20x1.5 for cable ⌀5 to 10 mm (0.2 to 0.39 in)
– For Dust-Ex, FM IS, CSA IS, CSA GP, Ex nA:
– For Ex d:
No gland available
• Thread
– ½" NPT
– G ½"
– M20 × 1.5
• Plug M12 / Plug 7/8"
Only available for Non-Ex, Ex ic, Ex ia
Connection of remote display FHX50

Dependent on feature 030: "Display, Operation":
• "Prepared for display FHX50 + M12 connection":
M12 socket
• "Prepared for display FHX50 + custom connection":
M16 cable gland
Cable specification • Devices without integrated overvoltage protection

Pluggable spring-force terminals for wire cross-sections 0.5 to 2.5 mm2 (20 to 14 AWG)
• Devices with integrated overvoltage protection
Screw terminals for wire cross-sections 0.2 to 2.5 mm2 (24 to 14 AWG)
• For ambient temperature TU≥60 °C (140 °F): use cable for temperature TU +20 K.
Endress+Hauser 29
HART
• A normal device cable suffices if only the analog signal is used.
• A shielded cable is recommended if using the HART protocol. Observe grounding concept of the
plant.
• For 4-wire devices: Standard device cable is sufficient for the power line.
PROFIBUS
Use a twisted, screened two-wire cable, preferably cable type A.
For further information on the cable specifications, see Operating Instructions BA00034S
"PROFIBUS DP/PA: Guidelines for planning and commissioning", PNO Guideline 2.092
"PROFIBUS PA User and Installation Guideline" and IEC 61158-2 (MBP).
FOUNDATION Fieldbus
Endress+Hauser recommends using twisted, shielded two-wire cables.
For further information on the cable specifications, see Operating Instructions BA00013S
"FOUNDATION Fieldbus Overview", FOUNDATION Fieldbus Guideline and IEC 61158-2 (MBP).
Overvoltage protection If the measuring device is used for level measurement in flammable liquids which requires the use of
overvoltage protection according to DIN EN 60079-14, standard for
test procedures 60060-1 (10 kA, pulse 8/20 μs), overvoltage protection has to be ensured by an
integrated or external overvoltage protection module.
Integrated overvoltage protection

An integrated overvoltage protection module is available for 2-wire HART as well as PROFIBUS PA
and FOUNDATION Fieldbus devices.
Product structure: Feature 610 "Accessory mounted", option NA "Overvoltage protection".
Technical data
Resistance per channel 2 × 0.5 Ω max.
Threshold DC voltage 400 to 700 V
Threshold impulse voltage < 800 V
Capacitance at 1 MHz < 1.5 pF
Nominal arrest impulse voltage (8/20 μs) 10 kA
External overvoltage protection

HAW562 or HAW569 from Endress+Hauser are suited as external overvoltage protection.
For detailed information please refer to the following documents:
• HAW562: TI01012K
• HAW569: TI01013K
30 Endress+Hauser
Performance characteristics
Reference operating • Temperature = +24 °C (+75 °F) ±5 °C (±9 °F)
conditions • Pressure = 960 mbar abs. (14 psia) ±100 mbar (±1.45 psi)
• Humidity = 60 % ±15 %
• Reflector: metal plate with a minimum diameter of 1 m (40 in)
• No major interference reflections inside the signal beam
Maximum measured error Typical data under reference operating conditions: DIN EN IEC 61298-2 / DIN EN IEC 60770-1;
percentage values in relation to the span.
Device Value Output
digital analog 1)
FMR53/FMR54 Sum of non- ± 6 mm (0.24 in) ± 0.02 %

linearity, throughout the
nonrepeatability and complete measuring
hysteresis range
Offset/Zero ± 4 mm (0.2 in) ± 0.03 %
1) Only relevant for 4-20mA current output; add error of the analog value to the digital value.
Measured value resolution Dead band according to DIN EN IEC 61298-2 / DIN EN IEC 60770-1:
• digital: 1 mm
• analog: 1 μA
Reaction time The reaction time can be parametrized. The following step response times (as per DIN EN IEC
61298-2 / DIN EN IEC 60770-1) 1)are valid if the damping is switched off:
Tank height Sampling rate Step response time
< 10 m (33 ft) ≥ 3.6 s–1 < 0.8 s
< 20 m (66 ft) ≥ 2.7 s–1 <1s
Influence of ambient The measurements are carried out in accordance with DIN EN IEC 61298-3 / DIN EN IEC
temperature 60770-1
• Digital (HART, PROFIBUS PA, FOUNDATION Fieldbus): average TK = 3 mm/10 K
• Analog (current output):
– zero point (4 mA): average TK = 0.02 %/10 K
– span (20 mA): average TK = 0.05 %/10 K
Influence of gas layer High pressures reduce the propagation velocity of the measuring signals in the gas/vapor above the
fluid. This effect depends on the kind of gas/vapor and of its temperature. This results in a
systematic measuring error that gets bigger as the distance increases between the reference point of
the measurement (flange) and the product surface. The following table illustrates this measured
error for a few typical gases/vapors (with regard to distance; a positive value means that too large a
distance is being measured):
Gas layer Temperature Pressure
°C °F 1 bar (14,5 psi) 10 bar (145 psi) 50 bar (725 psi) 100 bar (1450 psi) 160 bar (2320 psi)
Air/ 20 68 0.00 % 0.22 % 1.2 % 2.4 % 3.89 %

Nitrogen
200 392 –0.01 % 0.13 % 0.74 % 1.5 % 2.42 %
400 752 –0.02 % 0.08 % 0.52 % 1.1 % 1.70 %
Hydrogen 20 68 –0.01 % 0.10 % 0.61 % 1.2 % 2.00 %
1) According to DIN EN IEC 61298-2 / DIN EN IEC 60770-1 the response time is the time which passes after a sudden change of the input signal
until the output signal for the first time assumes 90% of the steady-state value.
Endress+Hauser 31
Gas layer Temperature Pressure
°C °F 1 bar (14,5 psi) 10 bar (145 psi) 50 bar (725 psi) 100 bar (1450 psi) 160 bar (2320 psi)
200 392 –0.02 % 0.05 % 0.37 % 0.76 % 1.23 %
400 752 –0.02 % 0.03 % 0.25 % 0.53 % 0.86 %
Water 100 212 0.02 % - - - -

(saturated
steam) 180 356 - 2.1 % - - -
263 505,4 - - 8.6 % - -
310 590 - - - 22 % -
364 687 - - - - 41.8 %
When the pressure is known and constant, this measured error can, for example, be
compensated by means of a linearization.
Gas phase compensation PROFIBUS devices can receive the signal of an external pressure sensor through the bus and use it to
with external pressure perform a pressure dependent time-of-flight correction. In the case of saturated steam in the
sensor (PROFIBUS PA, temperature range from 100 to 350 °C (212 to 662 °f), for example, the measuring error of the
FOUNDATION Fieldbus) distance measurement can be reduced by this method from up to 29 % (without compensation) to
less than 3 % (with compensation).
32 Endress+Hauser
Installation
Installation conditions Mounting position
• Recommended distance A from wall to outer

edge of nozzle: ~ 1/6 of tank diameter.
1 2 3 Nevertheless the device should not be
installed closer than 30 cm (11.8 in) to the
tank wall.
• Not in the center (2), as interference can
cause signal loss.
• Not above the fill stream (3).
• It is recommended to us a weather protection
cover (1) in order to protect the device from
A
direct sun or rain.
A0016882
Vessel installations
Avoid any installations (point level switches,

temperature sensors, braces, vacuum rings,
heating coils, baffles etc.) inside the signal
beam. Take into account the beam angle
→  35.
A0018944
Endress+Hauser 33
Reduction of interference echoes
Metallic screens mounted at a slope spread

the radar signal and can, therefore, reduce
interference echoes.
A0016890
Measurement in a plastic vessel

If the outer wall of the vessel is made of a non-conductive material (e.g. GRP), microwaves can also
be reflected off interfering installations outside the vessel (e.g. metallic pipes (1), ladders (2), grates
(3), ...). Therefore, there should be no such interfering installations in the signal beam. Please
contact Endress+Hauser for further information.
3
1
A0017123
34 Endress+Hauser
Optimization options
• Antenna size
The bigger the antenna, the smaller the beam angle α and the fewer interference echoes
→  35.
• Mapping
The measurement can be optimized by means of electronic suppression of interference echoes.
• Antenna alignment
Take into account the marker on the flange or threaded connection →  38 →  39 .
• Stilling well
A stilling well can be applied to avoid interferences →  41.
• Metallic screens mounted at a slope
They spread the radar signals and can, therefore, reduce interference echoes.
Beam angle
a
W = 2 . D . tan _
2
D
a
A0016891
 10 Relationship between beam angle α, distance D and beamwidth diameter W
The beam angle is defined as the angle α where the energy density of the radar waves reaches half
the value of the maximum energy density (3-dB-width). Microwaves are also emitted outside the
signal beam and can be reflected off interfering installations.
Beam diameter W as a function of beam angle α and measuring distance D:
FMR53
Beam angle α 23°
Measuring distance (D) Beamwidth diameter W
3 m (9.8 ft) 1.22 m (4 ft)
6 m (20 ft) 2.44 m (8 ft)
9 m (30 ft) 3.66 m (12 ft)
12 m (39 ft) 4.88 m (16 ft)
15 m (49 ft) 6.1 m (20 ft)
20 m (66 ft) 8.14 m (27 ft)
Endress+Hauser 35
FMR54 - Horn antenna
Antenna size 150 mm (6 in) 200 mm (8 in) 250 mm (10 in)
Beam angle α 23° 19° 15°
Distance (D) Beamwidth diameter W
3 m (9.8 ft) 1.22 m (4 ft) 1 m (3.3 ft) 0.79 m (2.6 ft)
6 m (20 ft) 2.44 m (8 ft) 2.01 m (6.6 ft) 1.58 m (5.2 ft)
9 m (30 ft) 3.66 m (12 ft) 3.01 m (9.9 ft) 2.37 m (7.8 ft)
12 m (39 ft) 4.88 m (16 ft) 4.02 m (13 ft) 3.16 m (10 ft)
15 m (49 ft) 6.1 m (20 ft) 5.02 m (16 ft) 3.95 m (13 ft)
20 m (66 ft) 8.14 m (27 ft) 6.69 m (22 ft) 5.27 m (17 ft)
Measuring conditions • In case of boiling surfaces, bubbling or tendency for foaming use FMR53 or FMR54. Depending
on its consistence, foam can either absorb microwaves or reflect them off the foam surface.
Measurement is possible under certain conditions. For FMR50, FMR51 and FMR52, the additional
option "Advanced dynamics" is recommended in these cases (feature 540: "Application Package",
option EM).
• In case of heavy steam development or condensate, the maximum measuring range of FMR50,
FMR51 and FMR52 may decrease depending on density, temperature and composition of the
steam → use FMR53 or FMR54.
• For the measurement of absorbing gases such as ammonia NH3 or some fluorocarbons 2), please
use Levelflex or Micropilot FMR54 in a stilling well.
• The measuring range begins, where the beam hits the tank bottom. Particularly with dish bottoms
or conical outlets the level cannot be detected below this point.
• In stilling well applications, the electromagnetic waves do not propagate completely outside the
tube. It must be taken into account that the accuracy may be reduced in the area C. In order to
guarantee the required accuracy in these cases, it is recommended to position the zero-point at a
distance C above the end of the tube (see figure).
• In case of media with a low dielectric constant (εr = 1.5 to 4) 3) the tank bottom can be visible
through the medium at low levels (low height C). Reduced accuracy has to be expected in this
range. If this is not acceptable, we recommend positioning the zero point at a distance C (see
figure) above the tank bottom in these applications.
• In principle it is possible to measure up to the tip of the antenna with FMR51, FMR53 and FMR54.
However, due to considerations regarding corrosion and build-up, the end of the measuring range
should not be chosen any closer than A (see figure) to the tip of the antenna.
• When using FMR54 with planar antenna, especially for media with low dielectric constants, the
end of the measuring range should not be closer than A: 1 m (3.28 ft) to the flange.
• The smallest possible measuring range B depends on the antenna version (see figure).
• The tank height should be at least H (see table).
2) Affected compounds are e.g. R134a, R227, Dymel 152a.

3) Dielectric constants of important media commonly used in various industries are summarized in the DC manual (CP01076F) and in the Endress
+Hauser "DC Values App" (available for Android and iOS).
36 Endress+Hauser
A
100%
H
B
C
0%
øD
A0018872
Device A B C H
FMR53 50 mm (1.97 in)
FMR54 - horn antenna 50 mm (1.97 in)

> 0.5 m (1.6 ft) 150 to 300 mm (5.91 to 11.8 in) > 1.5 m (4.9 ft)
FMR54 - planar
1 m (3.28 ft)
antenna
Mounting cladded flanges For cladded flanges of FMR53, observe the following:
• Use flange screws according to the number of flange holes.
• Tighten the screws with the required torque (see table).
• Retighten the screws after 24 hours or after the first temperature cycle.
• Depending on process pressure and process temperature check and retighten the screws at
regular intervals.
Usually, the PTFE flange cladding also serves as a seal between the nozzle and the device
flange.
Flange size Number of screws Recommended torque [Nm]
minimum maximum
EN
DN50/PN16 4 45 65
DN80/PN16 8 40 55
DN100/PN16 8 40 60
DN150/PN16 8 75 115
ASME
2"/150lbs 4 40 55
3"/150lbs 4 65 95
4"/150lbs 8 45 70
6"/150lbs 8 85 125
Endress+Hauser 37
Flange size Number of screws Recommended torque [Nm]
minimum maximum
JIS
10K 50A 4 40 60
10K 80A 8 25 35
10K 100A 8 35 55
10K 100A 8 75 115
Installation in vessel (free Rod antenna (FMR53)

space)
Alignment
• Align the antenna vertically to the product surface.
• A marking at the flange (somwhere between the flange holes) or the boss enables alignment of
the antenna. This marking must be aligned towards the tank wall as well as possible.
A B
°
90
°
90
°
90
° °
°
90 90
90
90 90
° °
90 90
° °
A0018974
Depending on the device version the marking may be a circle or two short parallel lines.
38 Endress+Hauser
Nozzle mounting
H
1 1
2 2
A0016821
 11 Nozzle height an diameter for the rod antenna (FMR53)

1 Inactive lengthof the antenna
2 Beam launched here
Antenna length 390 mm (15.4 in) 540 mm (21.3 in)
Nozzle height H < 100 mm (3.94 in) < 250 mm (9.84 in)
The inactive part (1) of the rod antenna must extend below the nozzle.
• For flanges with PTFE cladding: Observe the notes on the mounting of cladded flanges
→  37.
• Usually, the PTFE flange cladding also serves as a seal between the nozzle and the device
flange.
Threaded connection
• Tighten with the hexagonal nut only.
• Tool : 55 mm hexagonal wrench
• Maximum permissible torque:
– Thread PVDF: 35 Nm (26 lbf ft)
– Thread 316L: 60 Nm (44 lbf ft)
Horn antenna (FMR54)
Alignment
• Align the antenna vertically to the product surface.
• A marking at the flange (somwhere between the flange holes) enables alignment of the antenna.
This marking must be aligned towards the tank wall as well as possible.
Endress+Hauser 39
A B
°
90
°
90
°
90
° °
°
90 90
90
90 90
° °
90 90
° °
A0018974
Depending on the device version the marking may be a circle or two short parallel lines.
Nozzle mounting
The horn antenna must extend below the nozzle; if necessary select the device version with antenna
extension 100 to 400 mm (4 to 16 in) 4).
øD
A0016822
 12 Nozzle height and diameter for the horn antenna (FMR54)

1 Mounting nozzle
Antenna 1) Nozzle diameter D Maximum nozzle height Hmax 2)
BE: 150mm/6" 146 mm (5.75 in) 185 mm (7.28 in)
BF: 200mm/8" 191 mm (7.52 in) 268 mm (10.6 in)
BG: 250mm/10" 241 mm (9.49 in) 360 mm (14.2 in)
1) Feature 070 of the product structure; the antenna versions BC (Horn 80mm/3") and BD (Horn 100mm/4")
should not be mounted directly into the tank. They are only suited for bypass and stilling well applications.
2) valid for antennas without antenna extension
Measurement from the outside through plastic walls

• Dielectric constant of the medium: εr > 10
• If possible use the 250 mm (10 in) antenna.
• The distance between the lower edge of the antenna and the tank should be about 100 mm (4 in).
4) See product structure: feature 610 "Accessory Mounted", options OM, ON, OR, OS.
40 Endress+Hauser
• If possible, avoid mounting location where condensation or build-up might occur.

• In case of outdoor mounting, the space between antenna and vessel has to be protected from the
elements.
• Do not mount any potential reflectors (e.g. pipes) outside the tank in the signal beam.
Suitable thickness of the tank ceiling

Penetrated material PE PTFE PP Plexiglas
DK / εr 2.3 2.1 2.3 3.1
Optimum thickness 16 mm (0.65 in) 17 mm (0.68 in) 16 mm (0.65 in) 14 mm (0.56 in)
Planar antenna (FMR54)

The planar antenna is only suited for stilling well applications →  41. It can not be used for free
space applications.
Installation in stilling well
°
90
A0016841
 13 Installation in stilling well

1 Marking for antenna alignment
• For horn antenna: Align the marking towards the slots of the stilling well.
• No alignment is required for planar antennas.
• Measurements can be performed through an open full bore ball valve without any problems.
• After mounting, the housing can be turned 350° in order to facilitate access to the display and the
terminal compartment.
Recommendations for the stilling well

• Metal (no enamel coating; plastic on request).
• Constant diameter.
• Diameter of stilling well not larger than antenna diameter.
• Diameter difference between horn antenna and inner diameter of the stilling well as small as
possible.
• Weld seam as smooth as possible and on the same axis as the slots.
• Slots offset 180° (not 90°).
• Slot width or diameter of holes max. 1/10 of pipe diameter, de-burred. Length and number do not
have any influence on the measurement.
• Select horn antenna as big as possible. For intermedaite sizes (e.g. 180 mm (7 in)) select next
larger antenna and adapt it mechanically (for horn antennas)
• At any transition (i.e. when using a ball valve or mending pipe segments), no gap may be left
exceeding 1 mm (0.04 in).
Endress+Hauser 41
• The stilling well must be smooth on the inside (average roughness Rz ≤ 6.3 μm (248 μin)). Use
extruded or parallel welded metal pipe. An extension of the pipe is possible with welded flanges or
pipe sleeves. Flange and pipe have to be properly aligned at the inside.
• Do not weld through the pipe wall. The inside of the stilling well must remain smooth. In case of
unintentional welding through the pipe, the weld seam and any unevenness on the inside need to
be carefully removed and smoothened. Otherwise, strong interference echoes will be generated
and material build-up will be promoted.
• In the case of smaller nominal widths flanges must be welded to the pipe such that they allow for a
correct orientation (marker aligned toward slots).
The performance of Micropilot FMR54 with planar antenna is not dependent on the alignment
or geometry of standard stilling wells. No special alignment is required. However, make sure
that the planar antenna is installed vertically relative to the stilling well axis.
42 Endress+Hauser
Examples for the construction of stilling wells
A B A-A
A A 1
1 C
2 3
100%
100%
4
5
(5.91...19.7)
150…500
≤ 1 (0.04)
(5.91...19.7)
150…500
≤ 1 (0.04)
D 6
0%
0%
mm (in)
A0019009
A Micropilot FMR50/FMR51: Horn 40mm(1½")

B Micropilot FMR50/FMR51/FMR52/FMR54: Horn 80mm(3")
C Stilling well with slots
D Full bore ball valve
1 Marking for axial alignment
2 Threaded connection
3 e.g. welding neck flange DIN2633
4  hole max. 1/10  stilling well
5  hole max. 1/10  stilling well; single sided or drilled through
6 Inside of holes deburred
7 Diameter of opening of ball valve must always be equivalent to pipe diameter; avoid edges and constrictions.
Endress+Hauser 43
Installation in bypass
°
90
1
°
90
A0019446
 14 Installation in bypass
1 Marking for antenna alignment
2 Tank connectors
• Alighn the marker perpendicular (90°) to the tank connectors.

• Measurements can be performed through an open full bore ball valve without any problems.
• After mounting, the housing can be turned 350° in order to simplify access to the display and the
terminal compartment.
Recommendations for the bypass pipe

• Metal (no plastic or enamel coating).
• Constant diameter.
• Select horn antenna as big as possible. For intermediate sizes (e.g. 95 mm (3.5 in)) select next
larger antenna and adapt it mechanically (for horn antennas).
• Diameter difference between horn antenna and inner diameter of the bypass as small as possible.
• At any transition (i.e. when using a ball valve or mending pipe segments), no gap may be created
exceeding 1 mm (0.04 in).
• In the area of the tank connections (~ ±20 cm (7.87 in)) a reduced accuracy of the measurement
has to be expected.
44 Endress+Hauser
Example for the construction of a bypass
A
A-A
A A
≤ 1 (0.04)
2
C
(7.87) (7.87)
200
100%
200
3
4 B
4
3
(7.87) (7.87)
200
0%
200
mm (in)
A0019010
A Micropilot FMR50/FMR51/FMR52/FMR54: Horn 80mm(3")

B Full bore ball valve
C Minimum distance to upper connection pipe: 400 mm (15,7 in)
1 Marking for axial alignment
2 e.g. welding neck flange DIN2633
3 Diameter of the connection pipes as small as possible
4 Do not weld through the pipe wall; the inside of the bypass must remain smooth.
5 Diameter of opening of ball valve must always be equivalent to pipe diameter. Avoid edges and constrictions.
Endress+Hauser 45
Vessels with heat insulation
1
2
A0019142
If process temperatures are high, the device must be included in normal tank insulation to prevent
the electronics heating up as a result of heat radiation or convection. The insulation may not exceed
beyond the neck of the housing.
46 Endress+Hauser
Environment
Ambient temperature range Measuring device –40 to +80 °C (–40 to +176 °F); –50 °C (–58 °F) with manufacturer declaration on
request
Local display –20 to +70 °C (–4 to +158 °F), the readability of the display may be impaired at
temperatures outside the temperature range.
When operating the device in the open with strong sunlight:

• Mount the device in a shady position.
• Avoid direct sunlight, especially in warmer regions.
• Use a weather protection cover (see accessories).
Ambient temperature limits The following diagrams take into account only functional aspects. There may be further
restrictions for certified device versions. Please refere to the separate Safety Instructions
→  101.
With a temperature (Tp) at the process connection the admissible ambient temperature (Ta) is
reduced according to the following diagram (temperature derating):
Information concerning the derating tables

Option Meaning
A 2-wire; 4-20 mA HART
B 2-wire; 4-20 mA HART, switch output
C 2-wire; 4-20 mA HART, 4-20 mA
E 2-wire; FF, switch output
G 2-wire; PA, switch output
K 4-wire 90-253VAC; 4-20 mA HART
L 4-wire 10, 4-48VDC; 4-20 mA HART
FMR53 Ta
Process connection: Thread PVDF P1 P2
Housing: GT18 (316 L) P3
Temperature unit: °C (°F)
Tp
P5 P4
A0019351
Power Supply; Output (Pos. 2 P1 P2 P3 P4 P5 P6

of the product structure)
Tp Ta Tp Ta Tp Ta Tp Ta Tp Ta Tp Ta
A -40 80 80 80 80 80 80 -40 -40 -40 - -

(-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
B -40 80 80 80 80 80 80 -40 -40 -40 - -

Switch output not used (-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
B -40 77 77 77 80 76 80 -40 -40 -40 - -

Switch output used (-40) (171) (171) (171) (176) (169) (176) (-40) (-40) (-40)
C -40 80 80 80 80 80 80 -40 -40 -40 - -

Channel 2 not used (-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
C -40 79 79 79 80 79 80 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (176) (174) (176) (-40) (-40) (-40)
E, G -40 80 80 80 80 80 80 -40 -40 -40 - -

Endress+Hauser 47
FMR53 Ta
Tp
P5 P4
A0019351

E, G -40 78 78 78 80 78 80 -40 -40 -40 - -

K, L -40 77 77 77 80 77 80 -40 -40 -40 - -

(-40) (171) (171) (171) (176) (171) (176) (-40) (-40) (-40)
FMR53 Ta
Housing: GT19 (Plastics PBT) P3
Tp
P5 P4
A0019351

A -40 80 80 80 80 80 80 -40 -40 -40 - -

(-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
B -40 76 76 76 80 75 80 -40 -40 -40 - -

B -40 60 60 60 80 58 80 -40 -40 -40 - -

C -40 80 80 80 80 80 80 -40 -40 -40 - -

Channel 2 not used (-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
C -40 74 74 74 80 73 80 -40 -40 -40 - -

Channel 2 used (-40) (165) (165) (165) (176) (163) (176) (-40) (-40) (-40)
E, G -40 79 79 79 80 79 80 -40 -40 -40 - -

E, G -40 63 63 63 80 60 80 -40 -40 -40 - -

FMR53 Ta
Housing: GT20 (Alu, coated) P3
Tp
P5 P4
A0019351

A -40 80 80 80 80 80 80 -40 -40 -40 - -

(-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
B -40 80 80 80 80 80 80 -40 -40 -40 - -

B -40 77 77 77 80 76 80 -40 -40 -40 - -

48 Endress+Hauser
FMR53 Ta
Tp
P5 P4
A0019351

C -40 80 80 80 80 80 80 -40 -40 -40 - -

Channel 2 not used (-40) (176) (176) (176) (176) (176) (176) (-40) (-40) (-40)
C -40 79 79 79 80 79 80 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (176) (174) (176) (-40) (-40) (-40)
E, G -40 80 80 80 80 80 80 -40 -40 -40 - -

E, G -40 78 78 78 80 78 80 -40 -40 -40 - -

K, L -40 77 77 77 80 77 80 -40 -40 -40 - -

(-40) (171) (171) (171) (176) (171) (176) (-40) (-40) (-40)
FMR53 Ta
P1 P2
Process connection:
• Thread 316L P3
• Flange
Housing: GT18 (316 L) Tp
Temperature unit: °C (°F) P5 P4
A0019351

A -40 81 81 81 150 65 150 -40 -40 -40 - -

(-40) (178) (178) (178) (302) (149) (302) (-40) (-40) (-40)
B -40 82 82 82 150 66 150 -40 -40 -40 - -

B -40 77 77 77 150 59 150 -40 -40 -40 - -

C -40 82 82 82 150 66 150 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (302) (151) (302) (-40) (-40) (-40)
C -40 79 79 79 150 62 150 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (302) (144) (302) (-40) (-40) (-40)
E, G -40 82 82 82 150 67 150 -40 -40 -40 - -

E, G -40 78 78 78 150 61 150 -40 -40 -40 - -

K, L -40 77 77 77 150 60 150 -40 -40 -40 - -

(-40) (171) (171) (171) (302) (140) (302) (-40) (-40) (-40)
Endress+Hauser 49
FMR53 Ta
P1 P2
Process connection:
• Thread 316L P3
• Flange
Housing: GT19 (Plastics PBT) Tp
A0019351

A -40 80 80 80 150 55 150 -40 -40 -40 - -

(-40) (176) (176) (176) (302) (131) (302) (-40) (-40) (-40)
B -40 76 76 76 150 55 150 -40 -40 -40 - -

B -40 60 60 60 150 37 150 -40 -40 -40 - -

C -40 82 82 82 150 55 150 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (302) (131) (302) (-40) (-40) (-40)
C -40 74 74 74 150 54 150 -40 -40 -40 - -

Channel 2 used (-40) (165) (165) (165) (302) (129) (302) (-40) (-40) (-40)
E, G -40 79 79 79 150 55 150 -40 -40 -40 - -

E, G -40 63 63 63 150 40 150 -40 -40 -40 - -

FMR53 Ta
P1 P2
Process connection:
• Thread 316L P3
• Flange
Housing: GT20 (Alu, coated) Tp
A0019351

A -40 81 81 81 150 68 150 -40 -40 -40 - -

(-40) (178) (178) (178) (302) (154) (302) (-40) (-40) (-40)
B -40 82 82 82 150 69 150 -40 -40 -40 - -

B -40 77 77 77 150 63 150 -40 -40 -40 - -

C -40 82 82 82 150 69 150 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (302) (156) (302) (-40) (-40) (-40)
C -40 79 79 79 150 65 150 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (302) (149) (302) (-40) (-40) (-40)
E, G -40 83 83 83 150 70 150 -40 -40 -40 - -

E, G -40 78 78 78 150 64 150 -40 -40 -40 - -

K, L -40 77 77 77 150 64 150 -40 -40 -40 - -

(-40) (171) (171) (171) (302) (147) (302) (-40) (-40) (-40)
50 Endress+Hauser
FMR54 Ta
Horn antenna P1 P2
Seal: P3
• Viton
• EPDM Tp
• Kalrez P5 P4
Housing: GT18 (316 L) A0019351

A -40 81 81 81 200 52 200 -40 -40 -40 - -

(-40) (178) (178) (178) (392) (126) (392) (-40) (-40) (-40)
B -40 82 82 82 200 52 200 -40 -40 -40 - -

B -40 77 77 77 200 46 200 -40 -40 -40 - -

C -40 82 82 82 200 52 200 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (392) (126) (392) (-40) (-40) (-40)
C -40 79 79 79 200 49 200 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (392) (120) (392) (-40) (-40) (-40)
E, G -40 83 83 83 200 52 200 -40 -40 -40 - -

E, G -40 78 78 78 200 48 200 -40 -40 -40 - -

K, L -40 77 77 77 200 47 200 -40 -40 -40 - -

(-40) (171) (171) (171) (392) (117) (392) (-40) (-40) (-40)
FMR54 Ta
Horn antenna P1 P2
Seal: P3
• Viton
• EPDM Tp
• Kalrez P5 P4
Housing: GT19 (Plastics PBT) A0019351

A -40 80 80 80 200 29 200 -40 -40 -40 - -

(-40) (176) (176) (176) (392) (84) (392) (-40) (-40) (-40)
B -40 76 76 76 200 29 200 -40 -40 -40 - -

B -40 60 60 60 200 23 200 -40 -40 -40 - -

C -40 82 82 82 200 29 200 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (392) (84) (392) (-40) (-40) (-40)
C -40 74 74 74 200 29 200 -40 -40 -40 - -

Channel 2 used (-40) (165) (165) (165) (392) (84) (392) (-40) (-40) (-40)
E, G -40 79 79 79 200 29 200 -40 -40 -40 - -

E, G -40 63 63 63 200 26 200 -40 -40 -40 - -

Endress+Hauser 51
FMR54 Ta
Horn antenna P1 P2
Seal: P3
• Viton
• EPDM Tp
• Kalrez P5 P4
Housing: GT20 (Alu, coated) A0019351

A -40 81 81 81 200 57 200 -40 -40 -40 - -

(-40) (178) (178) (178) (392) (135) (392) (-40) (-40) (-40)
B -40 82 82 82 200 58 200 -40 -40 -40 - -

B -40 77 77 77 200 52 200 -40 -40 -40 - -

C -40 82 82 82 200 58 200 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (392) (136) (392) (-40) (-40) (-40)
C -40 79 79 79 200 54 200 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (392) (129) (392) (-40) (-40) (-40)
E, G -40 83 83 83 200 58 200 -40 -40 -40 - -

E, G -40 78 78 78 200 54 200 -40 -40 -40 - -

K, L -40 77 77 77 200 53 200 -40 -40 -40 - -

(-40) (171) (171) (171) (392) (127) (392) (-40) (-40) (-40)
FMR54 Ta
Horn antenna P1 P2
Seal: Graphite –196 to 280 °C (–321 to 536 °F) P3
Housing: GT18 (316 L)
P6 Tp
P5 P4
A0019344

A -196 81 81 81 280 46 280 -40 -40 -40 -196 -9

(-321) (178) (178) (178) (536) (115) (536) (-40) (-40) (-40) (-321) (16)
B -196 82 82 82 280 46 280 -40 -40 -40 -196 -9

Switch output not used (-321) (180) (180) (180) (536) (115) (536) (-40) (-40) (-40) (-321) (16)
B -196 77 77 77 280 42 280 -40 -40 -40 -196 -9

Switch output used (-321) (171) (171) (171) (536) (108) (536) (-40) (-40) (-40) (-321) (16)
C -196 82 82 82 280 46 280 -40 -40 -40 -196 -9

Channel 2 not used (-321) (180) (180) (180) (536) (115) (536) (-40) (-40) (-40) (-321) (16)
C -196 79 79 79 280 44 280 -40 -40 -40 -196 -9

Channel 2 used (-321) (174) (174) (174) (536) (111) (536) (-40) (-40) (-40) (-321) (16)
E, G -196 83 83 83 280 46 280 -40 -40 -40 -196 -9

E, G -196 78 78 78 280 44 280 -40 -40 -40 -196 -9

K, L -196 77 77 77 280 43 280 -40 -40 -40 -196 -9

(-321) (171) (171) (171) (536) (109) (536) (-40) (-40) (-40) (-321) (16)
52 Endress+Hauser
FMR54 Ta
Horn antenna P1 P2
Housing: GT19 (Plastics PBT)
P6 Tp
P5 P4
A0019344

A -196 80 80 80 280 13 280 -40 -40 -40 -196 18

(-321) (176) (176) (176) (536) (55) (536) (-40) (-40) (-40) (-321) (64)
B -196 76 76 76 280 13 280 -40 -40 -40 -196 18

B -196 60 60 60 280 13 280 -40 -40 -40 -196 18

C -196 82 82 82 280 13 280 -40 -40 -40 -196 18

Channel 2 not used (-321) (180) (180) (180) (536) (55) (536) (-40) (-40) (-40) (-321) (64)
C -196 74 74 74 280 13 280 -40 -40 -40 -196 18

Channel 2 used (-321) (165) (165) (165) (536) (55) (536) (-40) (-40) (-40) (-321) (64)
E, G -196 79 79 79 280 13 280 -40 -40 -40 -196 18

E, G -196 63 63 63 280 13 280 -40 -40 -40 -196 18

FMR54 Ta
Horn antenna P1 P2
Housing: GT20 (Alu, coated)
P6 Tp
P5 P4
A0019344

A -196 81 81 81 280 54 280 -40 -40 -40 -196 -15

(-321) (178) (178) (178) (536) (129) (536) (-40) (-40) (-40) (-321) (+5)
B -196 82 82 82 280 54 280 -40 -40 -40 -196 -15

Switch output not used (-321) (180) (180) (180) (536) (129) (536) (-40) (-40) (-40) (-321) (+5)
B -196 77 77 77 280 49 280 -40 -40 -40 -196 -15

Switch output used (-321) (171) (171) (171) (536) (120) (536) (-40) (-40) (-40) (-321) (+5)
C -196 82 82 82 280 54 280 -40 -40 -40 -196 -15

Channel 2 not used (-321) (180) (180) (180) (536) (129) (536) (-40) (-40) (-40) (-321) (+5)
C -196 79 79 79 280 51 280 -40 -40 -40 -196 -15

Channel 2 used (-321) (174) (174) (174) (536) (124) (536) (-40) (-40) (-40) (-321) (+5)
E, G -196 83 83 83 280 54 280 -40 -40 -40 -196 -15

E, G -196 78 78 78 280 50 280 -40 -40 -40 -196 -15

K, L -196 77 77 77 280 50 280 -40 -40 -40 -196 -15

(-321) (171) (171) (171) (536) (122) (536) (-40) (-40) (-40) (-321) (+5)
Endress+Hauser 53
FMR54 Ta
Horn antenna P1 P2
Housing: GT18 (316 L)
P6 Tp
P5 P4
A0019344

A -196 81 81 81 400 31 400 -40 -40 -40 -196 -13

(-321) (178) (178) (178) (752) (88) (752) (-40) (-40) (-40) (-321) (+9)
B -196 82 82 82 400 31 400 -40 -40 -40 -196 -13

B -196 77 77 77 400 29 400 -40 -40 -40 -196 -13

C -196 82 82 82 400 31 400 -40 -40 -40 -196 -13

Channel 2 not used (-321) (180) (180) (180) (752) (88) (752) (-40) (-40) (-40) (-321) (+9)
C -196 79 79 79 400 31 400 -40 -40 -40 -196 -13

Channel 2 used (-321) (174) (174) (174) (752) (88) (752) (-40) (-40) (-40) (-321) (+9)
E, G -196 83 83 83 400 31 400 -40 -40 -40 -196 -13

E, G -196 78 78 78 400 31 400 -40 -40 -40 -196 -13

K, L -196 77 77 77 400 30 400 -40 -40 -40 -196 -13

(-321) (171) (171) (171) (752) (86) (752) (-40) (-40) (-40) (-321) (+9)
FMR54 Ta
Horn antenna P1 P2
Housing: GT19 (Plastics PBT)
P6 Tp
P5 P4
A0019344

A -196 80 80 80 400 -19 400 -40 -40 -40 -196 11

(-321) (176) (176) (176) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
B -196 76 76 76 400 -19 400 -40 -40 -40 -196 11

Switch output not used (-321) (169) (169) (169) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
B -196 60 60 60 400 -19 400 -40 -40 -40 -196 11

Switch output used (-321) (140) (140) (140) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
C -196 82 82 82 400 -19 400 -40 -40 -40 -196 11

Channel 2 not used (-321) (180) (180) (180) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
C -196 74 74 74 400 -19 400 -40 -40 -40 -196 11

Channel 2 used (-321) (165) (165) (165) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
E, G -196 79 79 79 400 -19 400 -40 -40 -40 -196 11

Switch output not used (-321) (174) (174) (174) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
E, G -196 63 63 63 400 -19 400 -40 -40 -40 -196 11

Switch output used (-321) (145) (145) (145) (752) (-2) (752) (-40) (-40) (-40) (-321) (52)
54 Endress+Hauser
FMR54 Ta
Horn antenna P1 P2
Housing: GT20 (Alu, coated)
P6 Tp
P5 P4
A0019344

A -196 81 81 81 400 42 400 -40 -40 -40 -196 -19

(-321) (178) (178) (178) (752) (108) (752) (-40) (-40) (-40) (-321) (-2)
B -196 82 82 82 400 42 400 -40 -40 -40 -196 -19

Switch output not used (-321) (180) (180) (180) (752) (108) (752) (-40) (-40) (-40) (-321) (-2)
B -196 77 77 77 400 39 400 -40 -40 -40 -196 -19

Switch output used (-321) (171) (171) (171) (752) (102) (752) (-40) (-40) (-40) (-321) (-2)
C -196 82 82 82 400 42 400 -40 -40 -40 -196 -19

Channel 2 not used (-321) (180) (180) (180) (752) (108) (752) (-40) (-40) (-40) (-321) (-2)
C -196 79 79 79 400 41 400 -40 -40 -40 -196 -19

Channel 2 used (-321) (174) (174) (174) (752) (106) (752) (-40) (-40) (-40) (-321) (-2)
E, G -196 83 83 83 400 42 400 -40 -40 -40 -196 -19

Switch output not used (-321) (181) (181) (181) (752) (108) (752) (-40) (-40) (-40) (-321) (-2)
E, G -196 78 78 78 400 40 400 -40 -40 -40 -196 -19

Switch output used (-321) (172) (172) (172) (752) (104) (752) (-40) (-40) (-40) (-321) (-2)
K, L -196 77 77 77 400 40 400 -40 -40 -40 -196 -19

(-321) (171) (171) (171) (752) (104) (752) (-40) (-40) (-40) (-321) (-2)
FMR54 Ta
Planar antenna P1 P2
Tp
P5 P4
A0019351

A -40 81 81 81 150 69 150 -40 -40 -40 - -

(-40) (178) (178) (178) (302) (156) (302) (-40) (-40) (-40)
B -40 82 82 82 150 69 150 -40 -40 -40 - -

B -40 77 77 77 150 63 150 -40 -40 -40 - -

C -40 82 82 82 150 70 150 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (302) (158) (302) (-40) (-40) (-40)
C -40 79 79 79 150 66 150 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (302) (151) (302) (-40) (-40) (-40)
E, G -40 83 83 83 150 71 150 -40 -40 -40 - -

E, G -40 78 78 78 150 65 150 -40 -40 -40 - -

K, L -40 77 77 77 150 64 150 -40 -40 -40 - -

(-40) (171) (171) (171) (302) (147) (302) (-40) (-40) (-40)
Endress+Hauser 55
FMR54 Ta
Housing: GT19 (Plastics PBT) P3
Tp
P5 P4
A0019351

A -40 80 80 80 150 60 150 -40 -40 -40 - -

(-40) (176) (176) (176) (302) (140) (302) (-40) (-40) (-40)
B -40 76 76 76 150 60 150 -40 -40 -40 - -

B -40 60 60 60 150 41 150 -40 -40 -40 - -

C -40 82 82 82 150 60 150 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (302) (140) (302) (-40) (-40) (-40)
C -40 74 74 74 150 57 150 -40 -40 -40 - -

Channel 2 used (-40) (165) (165) (165) (302) (135) (302) (-40) (-40) (-40)
E, G -40 79 79 79 150 60 150 -40 -40 -40 - -

E, G -40 63 63 63 150 44 150 -40 -40 -40 - -

FMR54 Ta
Tp
P5 P4
A0019351

A -40 81 81 81 150 71 150 -40 -40 -40 - -

(-40) (178) (178) (178) (302) (160) (302) (-40) (-40) (-40)
B -40 82 82 82 150 72 150 -40 -40 -40 - -

B -40 77 77 77 150 66 150 -40 -40 -40 - -

C -40 82 82 82 150 72 150 -40 -40 -40 - -

Channel 2 not used (-40) (180) (180) (180) (302) (162) (302) (-40) (-40) (-40)
C -40 79 79 79 150 68 150 -40 -40 -40 - -

Channel 2 used (-40) (174) (174) (174) (302) (154) (302) (-40) (-40) (-40)
E, G -40 83 83 83 150 73 150 -40 -40 -40 - -

E, G -40 78 78 78 150 68 150 -40 -40 -40 - -

K, L -40 77 77 77 150 67 150 -40 -40 -40 - -

(-40) (171) (171) (171) (302) (153) (302) (-40) (-40) (-40)
Storage temperature –40 to +80 °C (–40 to +176 °F)

–50 °C (–58 °F) with manufacturer declaration on request
Climate class DIN EN 60068-2-38 (test Z/AD)
56 Endress+Hauser
Altitude according to • Generally up to 2 000 m (6 600 ft) above MSL.

IEC61010-1 Ed.3 • Above 2 000 m (6 600 ft) if the following conditions are met:
– Ordering feature 020 "Power supply; Output" = A, B, C, E or G (2-wire versions)
– Supply voltage U < 35 V
– Supply voltage of overvoltage category 1
Degree of protection • With closed housing tested according to:

– IP68, NEMA6P (24 h at 1.83 m under water surface)
– For plastic housing with transparent cover (display module): IP68 (24 h at 1.00 m under water
surface) 5)
– IP66, NEMA4X
• With open housing: IP20, NEMA1
• Display module: IP22, NEMA2
Degree of protection IP68 NEMA6P applies for M12 PROFIBUS PA plugs only when the
PROFIBUS cable is plugged in and is also rated IP68 NEMA6P.
Vibration resistance DIN EN 60068-2-64 / IEC 60068-2-64: 20 to 2 000 Hz, 1 (m/s2)2/Hz
Cleaning the antenna The antenna can get contaminated, depending on the application. The emission and reception of
microwaves can thus eventually be hindered. The degree of contamination leading to an error
depends on the medium and the reflectivity, mainly determined by the dielectric constant εr.
If the medium tends to cause contamination and deposits, cleaning on a regular basis is
recommended. Care has to be taken not to damage the antenna in the process of a mechanical or
hose-down cleaning. The material compatibility has to be considered if cleaning agents are used! The
maximum permitted temperature at the flange should not be exceeded.
Electromagnetic Electromagnetic compatibility to all relevant requirements of the EN 61326- series and NAMUR
compatibility (EMC) recommendation EMC (NE21). For details see declaration of conformity. 6).
If only the analogue signal is used, unshielded interconnection lines are sufficient for the
installation. In case of using the digital signal (HART/ PA/ FF) use shielded interconnection lines.
Max. fluctuations during EMC- tests: < 0.5 % of the span. As an exception to this, the maximum
fluctuations may amount to 2 % of the span for devices with plastic housing and see-through lid
(integrated display SD02 or SD03) if strong electromagnetic interferences in the frequenency range
of 1 to 2 GHz are present.
5) This restriction is valid if the following options of the product structure have been selected at the same time: 030 ("Display, Operation") = C
("SD02") or E ("SD03"); 040 ("Housing") = A ("GT19").
6) Can be downloaded from www.endress.com.
Endress+Hauser 57
Process
Process temperature, Process
The specified pressure range may be reduced due to the selected process connection. The
pressure
pressure rating (PN) specified on the flanges refers to a reference temperature of 20 °C, for
ASME flanges 100 °F. Pay attention to pressure-temperature dependencies.
Please refer to the following standards for the pressure values permitted for higher
temperatures:
• EN 1092-1: 2001 Tab. 18
With regard to their temperature stability properties, the materials 1.4435 and 1.4404 are
grouped under 13E0 in EN 1092-1 Tab. 18. The chemical composition of the two materials
can be identical.
• ASME B 16.5a - 1998 Tab. 2-2.2 F316
• ASME B 16.5a - 1998 Tab. 2.3.8 N10276
• JIS B 2220
FMR53
[bar] ([psi]) p
1 2
40 (580)
3 (43.5)
0 (0)
-1 (-14.5) Tp
-40 0 +80 +150 [°C]
(-40) (+32) (+176) (+302) ([°F])
A0023251-EN
 15 FMR53: Admissible range of process temperature and process pressure

1 Process connection: Thread PVDF
2 Any other process connnection (thread 316L, flange)
Feature 100 "Process connection" Admissible process temperature Admissible process pressure
• RGF: Thread ANSI MNPT1-1/2, –40 to +80 °C (–40 to +176 °F) prel = –1 to 3 bar (–14.5 to 43.5 psi)
PVDF pabs < 4 bar (58 psi)
• RVF: Thread EN10226 R1-1/2,
PVDF
Any other process connection –40 to +150 °C (–40 to +302 °F) prel = –1 to 40 bar (–14.5 to 580 psi)
58 Endress+Hauser
FMR54
[bar] ([psi]) p
1 2
64 (928)
0 (0)
-1 (-14.5) Tp
-40 0 +150 +200 [°C]
(-40) (+32) (+302)(+392) ([°F])
[bar] ([psi]) p
3 4
64 (928)
0 (0)
-1 (-14.5) Tp
-40 -20 0 +150 +200 [°C]
(-40) (-4) (+32) (+302)(+392) ([°F])
[bar] ([psi]) p
5 6
160 (2320)
100 (1450)
0 (0)
-1 (-14.5) Tp
-196 0 +280 +400 [°C]
(-321) (+32) (+536)(+752) ([°F])
A0023254-EN
 16 FMR54 with horn antenna: Admissible range of process temperature and process pressure
1 Seal: Viton (Feature 090 "Seal", Option A8); valid for conductive media
2 Seal: Viton (Feature 090 "Seal", Option A8); enlarged area for non-conductive media
3 Seal: EPDM (Feature 090 "Seal", Option B4)
4 Seal: Kalrez
5 Seal: Graphite (XT) (Feature 090 "Seal", Option D1)
6 Seal: Graphite (HT) (Feature 090 "Seal", Option D2)
Endress+Hauser 59
prel
[bar] ([psi])
25 (375)
20 (300)
10 (150)
5 (75)
-20 (-4)
80 (+176)
100 (+212)
120 (+248)
150 (+302)
[°C] ([°F])
Tp
A0020552-EN
 17 FMR54 with planar antenna: Admissible range of process temperature and process pressure
Feature 070 "Antenna" Feature 090 Admissible process Admissible process

"Seal" temperature pressure
• AA: W/o horn, for pipe installation A8: Viton • conductive media: –1 to 64 bar
• BC: Horn 80mm/3" –40 to +150 °C (–14.5 to 928 psi)
• BD: Horn 100mm/4" (–40 to +302 °F)
• BE: Horn 150mm/6" • non-conductive media:
• BF: Horn 200mm/8" –40 to +200 °C
• BG: Horn 250mm/10" (–40 to +392 °F)
B4: EPDM –40 to +150 °C

(–40 to +302 °F)
C2: Kalrez –20 to +200 °C

(–4 to +392 °F)
D1: Graphite –196 to +280 °C –1 to 100 bar

(XT) (–321 to +536 °F) (–14.5 to 1 450 psi) 1)
D2: Graphite –196 to +400 °C –1 to 160 bar

(HT) (–321 to +752 °F) (–14.5 to 2 320 psi) 1)
• DA: Planar 150mm/6" A7: Viton –20 to +150 °C Dependent on the process
• DB: Planar 200mm/8" (–4 to +302 °F) temperature, TP;, see the
• DC: Planar 250mm/10" diagram above
• DD: Planar 300mm/12"
1) For devices with CRN approval the pressure range may be reduced →  84
Dielectric constant • For liquids

– εr ≥ 1.9 in free-field applications
– εr ≥ 1.4 in stilling well
• For bulk solids
εr ≥ 1.6
For dielectric constants (DC values) of many media commonly used in various industries refer
to:
• the Endress+Hauser DC manual (CP01076F)
• the Endress+Hauser "DC Values App" (available for Android and iOS)
60 Endress+Hauser
Mechanical construction
Dimensions Dimensions of the electronics housing
R100 98 (3.86)*
78 (3.07) 90 (3.54)
07)
(4.
141.9 (5.59)
3.5
ø108.5 (4.27)
144 (5.67)
115.25 (4.54)
ø10 A0011666
 18 Housing GT18 (316L); Dimensions in mm (in)

*for devices with integrated overvoltage protection.
R100
99.5 (3.92)*
78 (3.07) 90 (3.54)
)
.17
6 (4
144 (5.67)
ø10
ø106 (4.17)
134.5 (5.3)
A0011346
 19 Housing GT19 (Plastics PBT); Dimensions in mm (in)

R100 97 (3.82)*
78 (3.07) 90 (3.54)
7)
4.0
(
141.5 (5.57)
3.5
ø104.5 (4.11)
144 (5.67)
117.1 (4.61)
ø108.5 (4.27)
ø10
A0020751
 20 Housing GT20 (Alu coated); Dimensions in mm (in)

Endress+Hauser 61
FMR53 with flange
A B
101.5 (4)
99.5 (3.92)
b
b
øD øD
L2
L2
ø33 (1.3) ø33 (1.3)
L1
L1
A0023390
 21 FMR53 with flange; dimensions: mm (in)

A Process connection: Flange 316/316L (without cladding)
B Process connection: Flange PTFE>316L (cladded)
R Reference point of the measurement
Feature 070 "Antenna" Antenna length L1 Inactive length L2
CA: Rod 390mm/15" 390 mm (15.4 in) 100 mm (3.94 in)
CB: Rod 540mm/21" 540 mm (21.3 in) 250 mm (9.84 in)
Flanges according to EN1092-1 (suitable for DIN2527)

Pressure Dimension Nominal diameter
rating
DN50 DN80 DN100 DN150
b 20 mm (0.79 in) 20 mm (0.79 in) 20 mm (0.79 in) 22 mm (0.87 in)

PN10/16 D 165 mm 200 mm (7.87 in) 220 mm 285 mm
(6.5 in) (8.66 in) (11.2 in)
b - 24 mm (0.94 in) - -
PN25/40
D - 200 mm (7.87 in) - -
Flanges according to ANSI B16.5

Pressure Dimension Nominal diameter
rating
2" 3" 4" 6"
b 19.1 mm 23.9 mm (0.94 in) 23.9 mm (0.94 in) 25.4 mm (1 in)

(0.75 in)
150 lbs
D 152.4 mm 190.5 mm 228.6 mm (9 in) 279.4 mm
(6 in) (7.5 in) (11 in)
b - 28.4 mm (1.12 in) 31.8 mm (1.25 in) -

300 lbs D - 209.5 mm 254 mm (10 in) -
(8.25 in)
62 Endress+Hauser
Flanges according to JIS B2220

Nominal diameter
Pressure Dimension 50A 80A 100A 150A

rating

10 K D 155 mm (6.1 in) 185 mm 210 mm 280 mm (11 in)
(7.28 in) (8.27 in)
Endress+Hauser 63
FMR53 with thread
A B
26 (1.02)
26 (1.02)
46 (1.81)
46 (1.81)
99.5 (3.92)
99.5 (3.92)
L2
L2
ø33 (1.3) ø33 (1.3)
L1
L1
A0023391
 22 FMR53 with thread; dimensions: mm (in)

A Process connection: Thread 316L
B Process connection: Thread PVDF
Feature 070 "Antenna" Antenna length L1 Inactive length L2
CA: Rod 390mm/15" 390 mm (15.4 in) 100 mm (3.94 in)
CB: Rod 540mm/21" 540 mm (21.3 in) 250 mm (9.84 in)
64 Endress+Hauser
FMR54 with horn antenna
A B C D
295.6(11.6)
229.6(9.04)
77(3.03)
b
b
b
b
R
L1
L
L
L
78
(3.07)
ød ød ød
øD øD øD
L
ød
øD
A0017809
 23 FMR54 with horn antenna; dimensions: mm (in)

A Seal: Viton/EPDM/Kalrez
B Seal: Graphite, -196...280°C/-321...536°F (XT)
C Seal: Graphite, -196...400°C/-321...752°F (HT)
D Antenna extension; optionally available for all horn antennas
Feature 070 "Antenna"
Dimension BC: Horn BD: Horn BE: Horn BF: Horn BG: Horn
80mm/3" 100mm/4" 150mm/6" 200mm/8" 250mm/10"
L 68 mm (2.68 in) 105 mm 185 mm (7.28 in) 268 mm (10.6 in) 360 mm (14.2 in)
(4.13 in)
d 75 mm 95 mm 145 mm 190 mm 240 mm

(2.95 in) (3.74 in) (5.71 in) (7.48 in) (9.45 in)
L1 100 mm (3.94 in) / 200 mm (7.87 in) / 300 mm (11.8 in) / 400 mm (15.7 in)
Flanges according to EN1092-1 (suitable for DIN2527) 1)

Pressure Dimension Nominal diameter 2)
rating 2)
DN80 DN100 DN150 DN200 DN250
b 20 mm 20 mm 22 mm 24 mm 26 mm
(0.79 in) (0.79 in) (0.87 in) (0.94 in) (1.02 in)
PN10/16
D 200 mm 220 mm 285 mm 340 mm 405 mm
(7.87 in) (8.66 in) (11.2 in) (13.4 in) (15.9 in)
b 24 mm 24 mm - - -
(0.94 in) (0.94 in)
PN25/40
D 200 mm 235 mm - - -
(7.87 in) (9.25 in)
1) For flanges with a higher pressure rating than those listed in the product structure please contact Endress
+Hauser.
Endress+Hauser 65
Flanges according to ANSI B16.5 1)

rating 1)
3" 4" 6" 8" 10"
b 23.9 mm 23.9 mm 25.4 mm 28.4 mm 30.2 mm

(0.94 in) (0.94 in) (1 in) (1.12 in) (1.19 in)
150 lbs
D 190.5 mm 228.6 mm 279.4 mm 342.9 mm 406.4 mm
(7.5 in) (9 in) (11 in) (13.5 in) (16 in)
b 28.4 mm 31.8 mm - - -
(1.12 in) (1.25 in)
300 lbs
D 209.5 mm 254 mm - - -
(8.25 in) (10 in)
+Hauser.
Flanges according to JIS B 2220 1)

Pressure Dimensions Nominal diameter 2)
rating 1)
DN80 DN100 DN150 DN200 DN250
b 18 mm 18 mm 22 mm 22 mm 24 mm
(0.71 in) (0.71 in) (0.87 in) (0.87 in) (0.94 in)
10 K
D 185 mm 210 mm 280 mm 330 mm 400 mm
(7.28 in) (8.27 in) (11 in) (13 in) (15.7 in)
+Hauser.
66 Endress+Hauser
FMR54 with planar antenna
A B
b
R
94.5 (3.72)
94.5 (3.72)
30(1.18)
30(1.18)
46.5(1.83)
97(3.82)
46.5(1.83)
97(3.82)
ø150(5.91) ø150(5.91)
øE
L1
øe
øE mm (in)
A0017810
A With antenna extension (for planar antenna 200mm/8" to 300mm/12")

B Withoput horn extension (for planar antenna 150mm/6")
Antenna extension
Dimension Feature 070 "Antenna"
DB: Planar 200mm/8" DC: Planar 250mm/10" DD: Planar 300mm/12"
e 192 mm (7.56 in) 242 mm (9.53 in) 292 mm (11.5 in)
L1 341 mm (13.4 in) 494 mm (19.4 in) 521 mm (20.5 in)
Flanges according to EN1092-1 (suitable for DIN2527)

rating 1)
DN150 DN200 DN250 DN300

PN16
E 285 mm (11.2 in) 340 mm (13.4 in) 405 mm (15.9 in) 460 mm (18.1 in)
b 28 mm (1.1 in) 30 mm (1.18 in) - -

PN25
E 300 mm (11.8 in) 360 mm (14.2 in) - -
Flanges according to ANSI B16.5

rating 1)
6" 8" 10" 12"
b 25.4 mm (1 in) 28.4 mm (1.12 in) 30.2 mm (1.19 in) 31.8 mm (1.25 in)
150 lbs
E 279.4 mm (11 in) 342.9 mm (13.5 in) 406.4 mm (16 in) 482.6 mm (19 in)
Endress+Hauser 67

rating 1)
6" 8" 10" 12"
b 36.6 mm (1.44 in) 41.1 mm (1.62 in) - -

300 lbs
E 317.5 mm (12.5 in) 381 mm (15 in) - -
Flanges according to JIS B2220

rating 1)
DN150 DN200 DN250
b 22 mm (0.87 in) 22 mm (0.87 in) 24 mm (0.94 in)

10 K
E 280 mm (11 in) 330 mm (13 in) 400 mm (15.7 in)
b 28 mm (1.1 in) 30 mm (1.18 in) -

20 K
E 305 mm (12 in) 350 mm (13.8 in) -
Weight Housing
Part Weight
Housing GT18 - stainless steel approx.

4.5 kg (9.9 lb)
Housing GT19 - plastic approx.

1.2 kg (2.7 lb)
Housing GT20 - aluminium approx.

1.9 kg (4.2 lb)
Antenna and process connection

Device Weight of antenna and process connection
FMR53 max. 3.0 kg (6.6 lb) + weight of flange 1)
FMR54 max. 9 kg (19.9 lb) + weight of flange 1)
1) For the weight of the flange refer to Technical Information TI00426F.
68 Endress+Hauser
Materials: GT18 housing

1
(stainless steel, corrosion-
resistant) 2.1
2.2
5.2
6
5.1
7
4 3 9 8
A0013788
No. Part Material
1 Housing CF3M similar to 316L/1.4404
2.1 Cover of the electronics compartment • Cover: CF3M (similar to 316L/1.4404)

• Window: glass
• Cover seal: NBR
• Seal of the window: NBR
• Thread-coating: Graphite-based lubricant varnish
2.2 Cover of the terminal compartment • Cover: CF3M (similar to 316L/1.4404)

• Cover seal: NBR
3 Cover lock • Screw: A4

• Clamp: 316L (1.4404)
4 Lock at the housing neck • Screw: A4-70

• Clamp: 316L (1.4404)
5.1 Dummy plug, cable gland, adapter or plug • Dummy plug, depending on the device version:
(depending on the device version) – PE
– PBT-GF
• Cable gland: 316L (1.4404) or nickel-plated brass
• Adapter: 316L (1.4404/1.4435)
• Seal: EPDM
• M12 plug: Nickel-plated brass 1)
• 7/8" plug: 316 (1.4401) 2)
5.2 Dummy plug, cable gland or adapter (depending on • Dummy plug: 316L (1.4404)
the device version) • Cable gland: 316L (1.4404) or nickel-plated brass
• Adapter: 316L (1.4404/1.4435)
• Seal: EPDM
6 Dummy plug or M12 socket (depending on the • Dummy plug: 316L (1.4404)
device version) • M12 socket: 316L (1.4404)
7 Pressure relief stopper 316L (1.4404)
8 Ground terminal • Screw: A4

• Spring washer: A4
• Clamp: 316L (1.4404)
• Holder: 316L (1.4404)
9 Nameplate • Plate: 316L (1.4404)

• Groove pin: A4 (1.4571)
1) For the version with M12 plug the sealing material is Viton.
2) For the version with 7/8" plug, the sealing material is NBR.
Endress+Hauser 69

1
(plastic)
2.1
2.2
5.2
6
5.1
7
4 3 9 8
A0013788
No. Part Material
1 Housing PBT
2.1 Cover of the electronics compartment • Cover glass: PC

• Cover frame: PBT-PC
• Cover seal: EPDM
2.2 Cover of the terminal compartment • Cover: PBT

• Cover seal: EPDM

• Clamp: 316L (1.4404)
– PBT-GF
• Cable gland, depending on the device version:
– Nickel-plated brass (CuZn)
– PA
• Adapter: 316L (1.4404/1.4435)
• Seal: EPDM
• 7/8" plug: 316 (1.4401) 2)
5.2 Dummy plug, cable gland or adapter (depending on • Dummy plug, depending on the device version:
the device version) – PE
– PBT-GF
– Nickel-plated steel
– PA
• Adapter: 316L (1.4404/1.4435)
• Seal: EPDM
6 Dummy plug or M12 socket (depending on the • Dummy plug: Nickel-plated brass (CuZn)
device version) • M12 socket: Nickel-plated GD-Zn
7 Pressure relief stopper Nickel-plated brass (CuZn)

• Clamp: 304 (1.4301)
• Holder: 304 (1.4301)
9 Adhesive nameplate Plastic
70 Endress+Hauser

1
(die-cast aluminum, powder-
coated, seawater-resistant) 2.1
2.2
5.2
6
5.1
7
4 3 9 8
A0013788
Nr. Part Material
1 Housing, RAL 5012 (blue) • Housing: AlSi10Mg(<0,1% Cu)

• Coating: Polyester
2.1 Cover of the electronics compartment; RAL 7035 • Cover: AlSi10Mg(<0,1% Cu)
(gray) • Window: Glass
• Cover seal: NBR
• Seal of the window: NBR
2.2 Cover of the terminal compartment; RAL 7035 • Cover: AlSi10Mg(<0,1% Cu)
(gray) • Cover seal: NBR
3 Cover lock • Screw: A4

• Clamp: 316L (1.4404)

• Clamp: 316L (1.4404)
– PBT-GF
– PA
• Adapter: 316L (1.4404/1.4435)
• Seal: EPDM
• 7/8" plug: 316 (1.4401) 2)
5.2 Dummy plug, cable gland or adapter (depending on • Dummy plug, depending on the device version:
the device version) – PE
– PBT-GF
– Nickel-plated steel
– PA
• Adapter: 316L (1.4404/1.4435)
• Seal: EPDM
6 Dummy plug or M12 socket (depending on the • Dummy plug : Nickel-plated brass (CuZn)
device version) • M12 socket: Nickel-plated GD-Zn
7 Pressure relief stopper Nickel-plated brass (CuZn)
Endress+Hauser 71
Nr. Part Material

• Clamp: 304 (1.4301)
• Holder: 304 (1.4301)
9 Adhesive nameplate Plastic
Materials: Antenna and FMR53

process connection
A B
1 1
2 3
6 6
A0018954
A Flange version
B Version with threaded connection
Pos. Part Material
1 Housing adapter 316L (1.4404)
2 Connection 316L (1.4404)
3 Connection 316L (1.4404)
PVDF
4 Flange 316L (1.4404/1.4435)
5 Cladding PTFE
6 Rod antenna PTFE
72 Endress+Hauser
FMR54 with Hornantenne
A B C
1 1
2 2 2
4
4
A0018956
A Compact version
B Version with antenna extension
C High temperature version
Pos. Part Material
1 Sensor adapter 316L (1.4404)
2 Flange 316L (1.4404/1.4435)
3 Antenna extension 316L (1.4435)
Screw A4
Spring-lock washer A4
4 Horn antenna 316L (1.4404)
Screw A4
Spring-lock wahser (compact) A4
Nordlock washer (XT and HT version) A4
Process separation cone Compact version: Hight temperature version:

PTFE Al2O3
Seal Compact version: High temperature version:

• Viton: FKM Graphite
• Kalrez: FFKM
(K6375)
• EPDM
5 Process separation 316L (1.4404)
6 Temperature reduction 316L (1.4404)
Endress+Hauser 73
FMR54 with planar or drip-off antenna
A B
1 1
2 2
A0018957
A Version with horn

B Version without horn
Pos. Part Material
1 Flange 316L (1.4404/1.4435)
Adapter 316L (1.4404)
2 Housing adpater 316L (1.4404)
Sensor adapter 316L (1.4404)
Housing and retaining ring 316L (1.4404)
Screw A2
Planar antenna PTFE
Sealing ring FKM
3 Horn antenna 316L (1.4404)
74 Endress+Hauser
Materials: Weather
protection cover 1
2
3
7 4
5
6
A0015473
No Part: Material
1 Protection cover: 316L (1.4404)
2 Molded rubber part (4x): EPDM
3 Clamping screw: 316L (1.4404) + carbon fibre
4 Bracket: 316L (1.4404)
5 • Cheese head screw: A4-70

• Nut: A4
6 Ground terminal
• Screw: A4
• Clamp: 316L (1.4404)
• Holder: 316L (1.4404)
7 • Washer: A4
• Cheese head screw: A4-70
Endress+Hauser 75
Operability
Operating concept Operator-oriented menu structure for user-specific tasks
• Commissioning
• Operation
• Diagnostics
• Expert level
Operating languages
• English
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык (Russian)
• Svenska
• Türkçe
• 中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
• Bahasa Indonesia
• tiếng Việt (Vietnamese)
• čeština (Czech)
Feature 500 of the product structure determines which of these languages is preset on delivery.
Quick and save commissioning

• Interactive wizard with graphical interface for easy commissioning via FieldCare/DeviceCare
• Menu guidance with brief explanations of the individual parameter functions
• Standardized operation at the device and in the operating tools
Integrated data storage device (HistoROM)
• Enables transfer of configuration when changing electronic modules
• Records up to 100 event messages in the device
• Records up to 1000 measured values in the device
• Saves the signal curve on commissioning which can later be used as a reference.
Efficient diagnostics increase measurement reliability
• Remedy information is integrated in plain text
• Diverse simulation options and line recorder functions
Local operation Operation Pushbuttons Touch Control

with
Order code for Option C "SD02" Option E "SD

"Display;
Operation"
A0032219 A0032221
Display 4-line display 4-line display

elements white background lighting; switches to red in
event of device error
76 Endress+Hauser
Format for displaying measured variables and status variables can be individually configured
Permitted ambient temperature for the display: –20 to +70 °C (–4 to +158 °F)
The readability of the display may be impaired at temperatures outside the temperature
range.
Operating local operation with 3 push buttons (, , external operation via touch control; 3 optical
elements ) keys: , , 
Operating elements also accessible in various hazardous areas
Additional Data backup function

functionality The device configuration can be saved in the display module.
Data comparison function

The device configuration saved in the display module can be compared to the current device
configuration.
Data transfer function

The transmitter configuration can be transmitted to another device using the display module.
Operation with remote

display and operating
module FHX50
1 2 3
A0013137
 24 FHX50 operating options

1 Housing of the remote display and operating module FHX50
2 Display and operating module SD02, push buttons; cover must be removed
3 Display and operating module SD03, optical keys; can be operated through the glass of the cover
Remote operation Via HART protocol
2 3 6 8
1 4 5 7
A0013764
 25 Options for remote operation via HART protocol

1 PLC (programmable logic controller)
2 Transmitter power supply unit, e.g. RN221N (with communication resistor)
3 Connection for Commubox FXA191, FXA195 and Field Communicator 375, 475
4 Field Communicator 475
5 Computer with operating tool (e.g. FieldCare, AMS Device Manager, SIMATIC PDM)
6 Commubox FXA191 (RS232) or FXA195 (USB)
7 Field Xpert SFX350/SFX370
8 VIATOR Bluetooth modem with connecting cable
9 Transmitter
Endress+Hauser 77
Via PROFIBUS PA protocol
2 3
PROFIBUS DP
ENDRESS + HAUSER
PROFIBUS PA
T
4 4 4
A0015775
1 Segment coupler
2 Computer with Profiboard/Proficard and operating tool (e.g. FieldCare)
3 PLC (Progrommable Logic Controller)
4 Transmitter
5 Additional functions (valves etc.)
78 Endress+Hauser
Via FOUNDATION Fieldbus
IN
BT
FF-HSE
1
FF-H1 SB 2
PS BT
LD 4
3
BT ENDRESS + HAUSER
– +
%
PS
FF-H1
BT
1
2
A0017188
 26 FOUNDATION Fieldbus system architecture with associated components

1 FFblue Bluetooth modem
2 Field Xpert SFX350/SFX370
3 FieldCare
4 NI-FF interface card
IN Industrial network
FF-HSE High Speed Ethernet
FF-H1 FOUNDATION Fieldbus-H1
LD Linking Device FF-HSE/FF-H1
PS Bus Power Supply
SB Safety Barrier
BT Bus Terminator
Endress+Hauser 79
Via service interface (CDI)
3 –
+
E
2 1
A0014019
1 Service interface (CDI) of the measuring device (= Endress+Hauser Common Data Interface)
2 Commubox FXA291
3 Computer with "FieldCare" operating tool
80 Endress+Hauser
Integration in tank gauging The Endress+Hauser Tank Side Monitor NRF590 provides integrated communications for sites with
system multiple tanks, each with one or more sensors on the tank, such as radar, spot or average
temperature, capacitive probe for water detection and/or pressure sensors. Multiple protocols out of
the Tank Side Monitor guarantee connectivity to nearly any of the existing industry standard tank
gauging protocols. Optional connectivity of analog 4...20 mA sensors, digital I/O and analog output
simplify full tank sensor integration. Use of the proven concept of the intrinsically safe HART bus for
all on-tank sensors yields extremely low wiring costs, while at the same time providing maximum
safety, reliability and data availability.
1 2 3
4 5
8 NXA820
16...253 VAC
A0017982
 27 The complete measuring system consists of:

1 Tankvision workstation
2 Commubox FXA195 (USB) - optional
3 Computer with operating tool (ControlCare) - optional
4 Level measuring device
5 Temperature measuring device
6 Tank Side Monitor NRF590
7 Pressure measuring device
8 Tankvision Tank Scanner NXA820
Endress+Hauser 81
System integration via Vendor Managed Inventory

Fieldgate
By using Fieldgates to interrogate tank or silo levels remotely, suppliers of raw materials can provide
their regular customers with information about the current supplies at any time and, for example,
account for them in their own production planning. For their part, the Fieldgates monitor the
configured level limits and, if required, automatically activate the next supply. The spectrum of
options here ranges from a simple purchasing requisition via e-mail through to fully automatic order
administration by coupling XML data into the planning systems on both sides.
Remote maintenance of measuring equipment

Fieldgates not only transfer the current measured values, they also alert the responsible standby
personnel, if required, via e-mail or SMS. In the event of an alarm or also when performing routine
checks, service technicians can diagnose and configure connected HART devices remotely. All that is
required for this is the corresponding HART operating tool (e.g. FieldCare, ...) for the connected
device. Fieldgate passes on the information transparently, so that all options for the respective
operating software are available remotely. Some on-site service operations can be avoided by using
remote diagnosis and remote configuration and all others can at least be better planned and
prepared.
1 1 2
ENDRESS+HAUSER ENDRESS+HAUSER
RN 221N RN 221N
FXN 520
20...45 VDC
-
.
A0011278
 28 The complete measuring system consists of devices and:

1 Fieldgate FXA520
2 Multidrop Connector FXN520
The number of instruments which can be connected in mutidrop mode can be calculated by the
"FieldNetCalc" program. A description of this program can be found in Technical Information TI
400F (Multidrop Conncector FXN520). The program is available form your Endress+Hauser
sales organisation or in the internet at: www.de.endress.com/Download (text search =
"Fieldnetcalc").
82 Endress+Hauser
Certificates and approvals

CE mark The measuring system meets the legal requirements of the applicable EC guidelines. These are listed
in the corresponding EC Declaration of Conformity together with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
RoHS The measuring system complies with the substance restrictions of the Restriction on Hazardous
Substances Directive 2011/65/EU (RoHS 2).
RCM-Tick marking The supplied product or measuring system meets the ACMA (Australian Communications and Media
Authority) requirements for network integrity, interoperability, performance characteristics as well
as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic
compatibility are met. The products are labelled with the RCM- Tick marking on the name plate.
A0029561
Ex approval • ATEX
• IEC Ex
• CSA
• FM
• NEPSI
• KC
• INMETRO
• TIIS (in preparation)
Additional safety instructions must be observed for applications in hazardous areas. They are
contained in the separate "Safety Instructions" (XA) document, which is included in the scope of
delivery. Reference is made to the XA on the nameplate of the device.
Details on the available certificats as well as the associated XAs can be found in the Associated
documentation chapter in the Safety instructions section: →  101.
Dual seal according to The devices have been designed according to ANSI/ISA 12.27.01 as dual seal devices, allowing the
ANSI/ISA 12.27.01 user to waive the use and save the cost of installing external secondary process seals in the conduit
as required by the process sealing sections of ANSI/NFPA 70 (NEC) and CSA 22.1 (CEC) These
instruments comply with the North-American installation practice and provide a very safe and cost-
saving installation for pressurized applications with hazardous fluids.
Further information can be found in the Safety Instructions (XA) of the relevant devices.
Functional Safety Used for level monitoring (MIN, MAX, range) up to SIL 3 (homogeneous or inhomogeneous
redundancy), independently assessed by TÜV Rhineland as per IEC 61508. Other information see
documentation SD01087F: "Functional Safety Manual".
WHG WHG approval: Z-65.16-524
Sanitary compatibility The PTFE antenna of FMR53 conforms to FDA 21 CFR 177.1550 and USP <88> Class VI.
NACE MR 0175 / ISO 15156 For FMR51 and FMR54:

• The wetted, metallic materials comply with the requirements of NACE MR 0175 / ISO 15156.
• Declaration of conformity: see product structure, feature 580, option JB.
NACE MR 0103 For FMR51 and FMR54:

• The wetted, metallic materials comply with the requirements of NACE MR 0103.
• The certificate of compliance is based on NACE MR 0175.
The hardness and the intercrystalline corrision have been tested, as well as the heat treatment
(solution annealed) has been carried out. The used materials comply therefore with the
requirements of NACE MR 0103.
• Declaration of conformity: see product structure, feature 580, option JE.
Endress+Hauser 83
Pressure equipment with Pressure instruments with a flange and threaded boss that do not have a pressurized housing do not
allowable pressure fall within the scope of the Pressure Equipment Directive, irrespective of the maximum allowable
≤ 200 bar (2 900 psi) pressure.
Reasons:
According to Article 2, point 5 of EU Directive 2014/68/EU, pressure accessories are defined as
"devices with an operational function and having pressure-bearing housings".
If a pressure instrument does not have a pressure-bearing housing (no identifiable pressure chamber
of its own), there is no pressure accessory present within the meaning of the Directive.
Note:
A partial examination shall be performed for pressure instruments that are part of safety equipment
for the protection of a pipe or vessel from exceeding allowable limits (equipment with safety
function in accordance with Pressure Equipment Directive 2014/68/EU, Article 2, point 4).
Marine certificate Device Marine certificate 1)
GL ABS LR BV DNV
FMR53 - - - - -
FMR54     
1) see oredering feature 590 "Additional approval"
Radio standard The devices Micropilot FMR50, FMR51, FMR52, FMR53, FMR54, FMR56 and FMR57 are conform
EN302372-1/2 with the TLPR (Tanks Level Probing Radar) standard EN302372-1/2 and can always be used in
closed tanks or bins. For installation, points a to f in Annex B of EN302372-1 have to be taken into
account.
FCC / Industry Canada This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Canada CNR-Gen Section 7.1.3
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) This device may not interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
[Any] changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Japanese radio approval The devices FMR50, FMR51, FMR52, FMR54 and FMR57 comply with the Japanese Radio Law,
Article 6, Section 1(1).
CRN approval Some device versions have a CRN approval. Devices are CRN approved if the folowing two conditions
are met:
• The device has a CSA approval (Product structure: Feature 010 "Approval")
• The device has a CRN approved process connection according to the following table.
Feature 100 of the product structure Process connection
AFJ NPS 2" Cl.150 RF, 316/316L
AFK NPS 2" Cl.150, PTFE >316/316L
AGJ NPS 3" Cl.150 RF, 316/316L
AGK NPS 3" Cl.150, PTFE >316/316L
AHJ NPS 4" Cl.150 RF, 316/316L
84 Endress+Hauser
Feature 100 of the product structure Process connection
AHK NPS 4" Cl.150, PTFE >316/316L
AJJ NPS 6" Cl.150 RF, 316/316L
AJK NPS 6" Cl.150, PTFE >316/316L
AKJ NPS 8" Cl.150 RF, 316/316L
ALJ NPS 10" Cl.150 RF, 316/316L
AMJ NPS 12" Cl.150 RF, 316/316L
ASJ NPS 3" Cl.300 RF, 316/316L
ATJ NPS 4" Cl.300 RF, 316/316L
AUJ NPS 6" Cl.300 RF, 316/316L
AVJ NPS 8" Cl.300 RF, 316/316L
RGF Thread ANSI MNPT1-1/2, PVDF
RGJ Thread ANSI MNPT1-1/2, 316L
RVF Thread EN10226 R1-1/2, PVDF
RVJ Thread EN10226 R1-1/2, 316L
• Process connections without CRN approval are not included in this table.
• Refer to the product structure to see which process connections are available for a specific
device type.
• For some process connections not listed in the product structure a CRN approval is available
on request.
• CRN approved devices are marked with the registration number OF15872.5C on the
nameplate.
For device versions listed in the table below, the maximum allowed pressure is reduced if they
have a CRN approval. For device versions not listed in the table below the pressure range as
indicated in the "Process" chapter →  58 is not affected by the CRN approval.
Product Antenna 1) Process connection 2) Seal 3) max. pressure
FMR54 D1: Graphite (XT) 100 bar (1 450 psi)
D2: Graphite (HT) 100 bar (1 450 psi)

Track record FMR5x is the upgrade model of the corresponding FMR2xx series.
Endress+Hauser 85
Test, Certificate Feature 580 Designation Available for

"Test,
Certificate"
JA 3.1 Material certificate, wetted metallic parts, EN10204-3.1 inspection • FMR53

certificate • FMR54
JB Conformity to NACE MR0175, wetted metallic parts FMR54
JD 3.1 Material certificate, pressurized parts, EN10204-3.1 inspection FMR53

certificate
JE Conformity to NACE MR0103, wetted metallic parts FMR54
JF Conformity to AD2000, wetted metallic parts: • FMR53

Material of all wetted/pressurized parts conform to AD2000 (Technical • FMR54
rules W2, W9, W10)
KD Helium leak test, internal procedure, inspection certificate FMR54
KE Pressure test, internal procedure, inspection certificate • FMR53

• FMR54
KG 3.1 Material certificate+PMI test (XRF), internal procedure, wetted metallic FMR54
parts, EN10204-3.1 inspection certificate
KP Liquid penetrant test AD2000-HP5-3(PT), wetted/pressurized metallic • FMR53

parts, inspection certificate • FMR54
KQ Liquid penetrant test ISO23277-1 (PT), wetted/pressurized metallic parts, • FMR53

inspection certificate • FMR54
KR Liquid penetrant test ASME VIII-1 (PT), wetted/pressurized metallic parts, • FMR53
inspection certificate • FMR54
KS Welding documentation, wetted/pressurized seams • FMR53

• FMR54
consisting of
• Drawing
• WPQR (Welding Procedure Qualification Report)
• WPS (Welding Process Specification)
• Manufacturer Declaration
KV Conformity to ASME B31.3: • FMR53

The dimensions, materials of construction, pressure / temperature ratings • FMR54
and identification markings of the device comply with the requirements of
ASME B31.3
Test reports, declarations and material test certificates can be obtained electronically from the
W@M Device Viewer :
Enter the serial number from the nameplate (www.endress.com/deviceviewer)
This applies to the options of the following ordering features:
• 550 "Calibration"
• 580 "Test, Certificate"
Product documentation on Test reports, declarations and material certificates can be ordered as hardcopies via ordering feature
paper 570 "Service", option I7 „Product documentation on paper“. The printouts will be enclosed in the
product delivery.
86 Endress+Hauser
Other standards and • EN 60529

guidelines Degrees of protection by housing (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
• IEC/EN 61326
"Emission in accordance with Class A requirements". Electromagnetic compatibility (EMC
requirements)
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
• NAMUR NE 107
Status classification as per NE107
• NAMUR NE 131
Requirements for field devices for standard applications
• IEC61508
Functional safety of electrical/electronic/programmable electronic safety-related systems
Endress+Hauser 87
Ordering information
Ordering information Detailed ordering information is available from the following sources:
• In the Product Configurator on the Endress+Hauser website: www.endress.com -> Click "Corporate"
-> Select your country -> Click "Products" -> Select the product using the filters and search field ->
Open product page -> The "Configure" button to the right of the product image opens the Product
Configurator.
• From your Endress+Hauser Sales Center: www.addresses.endress.com
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop
88 Endress+Hauser
3-point linearity protocol The following notes must be taken into account if option F3 ("3 point linearity protocol") has
been selected in feature 550 ("Calibration").
The 3 points of the linearity protocol are defined as follows:
R R
500 (19.7)
A
1
6000 (236)
6000 (236)
A
500 (19.7)
1
2
2
3 3
A0023274
 29 Points of the 3-point linearity protocol; Dimensions: mm (in)

A Distance from reference point R to first measuring point
1 First measuring point
2 Second measuring point (centrally between first and third measuring point)
3 Third measuring point
Measuring point Position
1st measuring point • At the distance A from the reference point

• A = antenne length + antenna extension (if present) + 500 mm (19.7 in)
• Minimum distance: Amin = 1 000 mm (39.4 in)
2nd measuring point centrally between 1st and 3rd measuring point
3rd measuring point 6 000 mm (236 in) below the reference point, R
The position of the measuring points may vary by ±1 cm (±0.04 in).
The linearity is checked under reference conditions.
Endress+Hauser 89
5-point linearity protocol The following notes must be taken into account if option F4 ("5 point linearity protocol") has
been selected in feature 550 ("Calibration").
The five points of the linearity protocol are evenly distributetd across the measuring range (0% to
100%). In order to define the measuring range, Empty calibration (E) and Full calibration (F) have
to be specified 7).
The following restrictions have to be taken into account when defining E and F:
R R
A
E
E
F
F
A0019161
Device version Minimum distance Minimum span Maximum value for

between reference point "Empty calibration"
(R) and 100% level
FMR53/FMR54 A ≥ antenna length +

Without antenna extension 200 mm (8 in) 1)
FMR54 with antenna extension 2) A ≥ antenna length + F ≥ 400 mm (16 in) E ≤ 20 m (66 ft)
antenna extension +
200 mm (8 in) 3)
1) Minimum value for FMR53: 590 mm (23.6 in); Minimum value for FMR54: 400 mm (16 in)
2) Feature 610 "Accessory Mounted", option OM, ON, OR or OS
3) Minimum value: 400 mm (8 in)
The linearity is checked under reference conditions.
The selected values of Empty calibration and Full calibration are only used to record the
linearity protocol and are reset to their probe specific default values thereafter. If values
different from the default are required, they must be ordered as a customized parametrization
→  91.
7) If E and F are not specified, probe dependent default values will be used instead.
90 Endress+Hauser
Customized parametrization If the option IJ "Customized parametrization HART", IK "Customized parametrization PA" or IL
"Customized parametrization FF" has been selected in feature 570 "Service", customer specific
presettings can be selected for the following parameters:
Parameter Communication Selection list / range of

values
Setup → Distance unit • HART • in

• PA • ft
• FF • mm
• m
Setup → Empty calibration • HART max. 70 m (230 ft)

• PA
• FF
Setup → Full calibration • HART max. < 70 m (230 ft)

• PA
• FF
Setup → Adv. Setup → Current output 1/2 → Damping HART 0 to 999.9 s
Setup → Adv. Setup → Current output 1/2 → Failure mode HART • Min
• Max
• Last valid value
Setup → Adv. Setup → Current output 1/2 → Burst mode HART • Off
• On
Services The following services can be selected via the product structure in the Product Configurator 8):
• PWIS free (PWIS: paint wetting impairment substances)
• Customized parametrization HART →  91
• Customized parametrization PA→  91
• Customized parametrization FF →  91
• Without tooling DVD (FieldCare)
Endress+Hauser 91
Application Packages
Heartbeat Diagnostics Availability
Available in all device versions.
Function
• Continuous self-monitoring of the device.
• Diagnostic messages output to
– the local display.
– an asset management system (e.g. FieldCare/DeviceCare).
– an automation system (e.g. PLC).
Advantages
• Device condition information is available immediately and processed in time.
• The status signals are classified in accordance with VDI/VDE 2650 and NAMUR recommendation
NE 107 and contain information about the cause of the error and remedial action.
Detailed description
See Operating Instructions of the device (→  101); chapter "Diagnostics and trouble shooting"
92 Endress+Hauser
Heartbeat Verification Availability

Available for the following options of feature 540 "Application Package":
• EH: Heartbeat Verification + Monitoring
• EJ: Heartbeat Verification
Device functionality checked on demand

• Verification of the correct functioning of the measuring device within specifications.
• The verification result provides information about the condition of the device: Passed or Failed.
• The results are documented in a verification report.
• The automatically generated report supports the obligation to demonstrate compliance with
internal and external regulations, laws and standards.
• Verification is possible without interrupting the process.
Advantages
• No onsite presence is required to use the function.
• The DTM 9) triggers verification in the device and interprets the results. No specific knowledge is
required on the part of the user.
• The verification report can be used to prove quality measures to a third party.
• Heartbeat Verification can replace other maintenance tasks (e.g. periodic check) or extend the
test intervals.
SIL/WHG-locked devices 10)
• The Heartbeat Verification module contains a wizard for the proof test which must be performed
at appropriate intervals for the following applications:
– SIL (IEC61508/IEC61511)
– WHG (German Water Resources Act)
• To perform a proof test, the device must be locked (SIL/WHG locking).
• The wizard can be used via FieldCare, DeviceCare or a DTM-based process control system.
In the case of SIL-locked and WHG-locked devices, it is not possible to perform verification
without additional measures (e.g. by-passing of the output current) because the output current
must be simulated (Increased safety mode) or the level must be approached manually (Expert
mode) during subsequent re-locking (SIL/WHG locking).
SD01871F
9) DTM: Device Type Manager; controls device operation via DeviceCare, FieldCare or a DTM-based process control system.
10) Only relevant for devices with SIL or WHG approval: order code 590 ("Additional approval"), option LA ("SIL") or LC ("WHG").
Endress+Hauser 93
Heartbeat Monitoring Availability

Available for the following options of feature 540 "Application Package":
EH: Heartbeat Verification + Monitoring
Function
• In addition to the verification parameters, the corresponding parameter values are also logged.
• Existing measured variables, such as the echo amplitude, are used in the Foam detection and
Build-up detection wizards.
The Foam detection and Build-up detection wizards cannot be used together.
"Foam detection" wizard

• The Heartbeat Monitoring module contains the Foam detection wizard.
• This wizard is used to configure automatic foam detection, which detects foam on the product
surface on the basis of the reduced signal amplitude. Foam detection can be linked to a switch
output in order to control a sprinkler system, for example, which dissolves the foam.
• This wizard can be used via FieldCare, DeviceCare or a DTM-based process control system.
"Build-up detection" wizard

• The Heartbeat Monitoring module contains the Build-up detection wizard.
• The wizard is used to configure automatic buildup detection, which detects the buildup of deposits
on the antenna on the basis of the increased area of the coupling signal. Buildup detection can be
linked to a switch output in order to control a compressed air system, for example, to clean the
antenna.
• This wizard can be used via FieldCare, DeviceCare or a DTM-based process control system.
Advantages
• Early detection of changes (trends) to ensure plant availability and product quality.
• Use of information for the proactive planning of measures (e.g. cleaning/maintenance).
• Identification of undesirable process conditions as the basis to optimizing the facility and the
processes.
• Automated control of measures to remove foam or buildup.
SD01871F
94 Endress+Hauser
Accessories
Device-specific accessories Weather protection cover
Accessory Description
Weather protection cover
222 (8.74) A0015466
298.5 (11.8) 273.7 (10.8)

255.1 (10) 164 (6.46)
b
55
°
a
4)
65°
35°
(6.1
156
A0015472
 30 Weather protection cover; Dimensions: mm (in)

a 37,8 mm (1,5 in)
b 54 mm (2,1 in)
 The weather protection cover can be ordered together with the device (product structure, feature 620 "Accessory
Enclosed", option PB "Weather Protection Cover").
Alternatively, it can be separately ordered as an accessory; order code 71162242.
Endress+Hauser 95
Antenna extension FAR10 (for FMR54)
Antenna extension
FAR10 (for FMR54)
ø78 (ø3.07)
ø44.5 (ø1.75)
ø62 (ø2.44)
ø40 (ø1.57)
1 L1 2 mm (in)
A0018879
1 Instrument connection
2 Horn connection
Material:
• 316L (1.4404)
• Alloy B2
• Alloy C4
Length L1:
• 100 mm (4 in)
• 200 mm (8 in)
• 300 mm (12 in)
• 400 mm (16 in)
Detailed ordering information is available from the following sources:
• In the Product Configurator on the Endress+Hauser website: www.endress.com → Select country → Instruments →
Select device → Product page function: Configure this product
• From your Endress+Hauser Sales Center: www.endress.com/worldwide
96 Endress+Hauser
Remote display FHX50
Accessories Description
Remote display FHX50
2.
1.
4.
3.
A0019128
• Material:
– Plastic PBT
– 316L/1.4404
• Degree of protection: IP68 / NEMA 6P and IP66 / NEMA 4x
• Suitable for display modules:
– SD02 (push buttons)
– SD03 (touch control)
• Connecting cable:
– Cable supplied with device up to 30 m (98 ft)
– Standard cable supplied by customer up to 60 m (196 ft)
• Ambient temperature range: –40 to 80 °C (–40 to 176 °F)
• Ambient temperature range (option): –50 to 80 °C (–58 to 176 °F) 1)
 • IfL ortheM).remote display should be used, order the device version "Prepared for display FHX50" (feature 030, version
For the FHX50, you must select option A: "Prepared for display FHX50" under feature 050 "Measuring
device version".
• If the device version "Prepared for display FHX50" was not originally ordered and a FHX50 display is to be
retrofitted, you must select version B "Not prepared for display FHX50" under feature 050: "Measuring device
version" when ordering the FHX50. In this case, a retrofit kit for the device is supplied with the FHX50. The kit
can be used to prepare the device so that the FHX50 can be used.
 Use of the FHX50 may be restricted for transmitters with an approval. A device can only be retrofitted with the
FHX50 if the option L or M ("Prepared for FHX50") is listed under Basic specifications, item 4 "Display, operation" in
the Safety Instructions (XA) for the device.
Also pay attention to the Safety Instructions (XA) of the FHX50.
 Retrofitting is not possible on transmitters with:

• An approval for use in areas with flammable dust (dust ignition-proof approval)
• Ex nA type of protection
 For details, see document SD01007F.

1) This range is valid if option JN "Ambient temperature transmitter –50 °C (–58 °F)" has been selected in ordering feature 580 "Test, Certificate". If
the temperature is permanently below –40 °C (–40 °F), failure rates may be increased.
Endress+Hauser 97
Overvoltage protection
Overvoltage protection for

2-wire-devices
OVP10 (1 channel)
OVP20 (2 channel)
A0021734
Technical data
• Resistance per channel: 2 * 0.5 Ωmax
• Threshold DC voltage: 400 to 700 V
• Threshold impulse voltage: < 800 V
• Capacitance at 1 MHz: < 1.5 pF
• Nominal arrest impulse voltage (8/20 μs): 10 kA
• Suited for wire cross-sections: 0.2 to 2.5 mm2 (24 to 14 AWG)
 Ordering with device

The overvoltage protection module is preferably ordered with the device. See product structure, feature 610
"Accessory mounted", option NA "Overvoltage protection". Separate ordering of the module is only necessary if a
device is to retrofitted with the overvoltage protection.
 Order code for retrofitting

• For 1-channel devices (feature 020, option A)
OVP10: 71128617
• For 2-channel devices (feature 020, option B, C, E or G)
OVP20 : 71128619
Hosuing lid for retrofitting
In order to keep the necessary safety distances, the housing lid needs to be replaced if the device is retrofitted with
the overvoltage protection. Depending on the housing type, the order code of the suitable lid is as follows:
• GT18 housing: Lid 71185516
 Restrictions for retrofitting

Depending on the approval of the transmitter the usage of the OVP module may be restricted. A device may only be
retrofitted with an OVP module if the option NA (overvoltage protection) is quoted unter Optional Specifications in
the Safety Instructions (XA) pertaining to the device.
 For details refer to SD01090F.
Gas-tight feedthrough
Gas-tight feedthrough Chemically inert glass feedthrough; prevents migration of gases into the electronics housing.
To be ordered with the device: product structure, feature 610 "Accessory Mounted", option NC "Gas-tight feedthrough"
98 Endress+Hauser
Communication-specific Accessory Description

accessories
Commubox FXA195 For intrinsically safe HART communication with FieldCare via the USB interface.
HART
 For details refer to Technical Information TI00404F
Commubox FXA291 Connects Endress+Hauser field devices with CDI interface (= Endress+Hauser
Common Data Interface) to the USB interface of a computer.
Order code: 51516983
 For details refer to Technical Information TI00405C
HART Loop Converter Evaluates the dynamic HART variables and converts them to analog current signals
HMX50 or limit values.
Order code: 71063562
 For details refer to Technical Information TI00429F and Operating

Instructions BA00371F
WirelessHART Adapter Connects field devices to a WirelessHART network.

SWA70 The WirelessHART adapter can be mounted directly at a HART device and is easly
integrated into an existing HART network. It ensures safe data transmission and
can be operated in parallel with other wireless networks.
 For details refer to Operating Instructions BA00061S
Fieldgate FXA320 Gateway for remote monitoring of connected 4-20mA measuring devices via web
browser.
 For details refer to Technical Information TI00025S and Operating

Instructions BA00053S
Fieldgate FXA520 Gateway for remote diagnosis and parametrization of connected HART measuring
devices via web browser.
 For details refer to Technical Information TI00025S and Operating

Instructions BA00051S
Field Xpert SFX350 Field Xpert SFX350 is a mobile computer for commissioning and maintenance. It
enables efficient device configuration and diagnostics for HART and FOUNDATION
fieldbus devices in the non-Ex area.
 For details, see Operating Instructions BA01202S
Endress+Hauser 99
Field Xpert SFX370 Field Xpert SFX370 is a mobile computer for commissioning and maintenance. It
enables efficient device configuration and diagnostics for HART and FOUNDATION
fieldbus devices in the non-Ex area and the Ex area.
 For details, see Operating Instructions BA01202S

Service-specific accessories Accessory Description
FieldCare / DeviceCare Endress+Hauser's FDT-based Plant Asset Management tool.

Helps to configure and maintain all field devices of your plant. By supplying status
information it also supports the diagnosis of the devices.
 For details refer to Operating Instructions BA00027S and BA00059S.

System components Accessory Description
Graphic Data Manager The graphic data manager Memograph M provides information on all the relevant
Memograph M process variables. Measured values are recorded correctly, limit values are
monitored and measuring points analyzed. The data are stored in the 256 MB
internal memory and also on an SD card or USB stick.
 For details refer to Technical Information TI00133R and Operating

Instructions BA00247R
RN221N Active barrier with power supply for safe separation of 4 to 20 mA current circuits.
Provides bi-directional HART transmission.

Instructions BA00202R
RNS221 Transmitter supply for 2-wire sensors or transmitters exclusively for non-Ex areas.
Provides bi-directional communication using the HART communication sockets.

Instructions KA00110R
100 Endress+Hauser
Documentation
The following document types are available:
In the Download Area of the Endress+Hauser Internet site: www.endress.com → Download
Standard documentation Micropilot FMR53, FMR54
Correlation of documentations to the device:

Device Power supply, Communikation Document type Document code
output
FMR53 A, B, C, K, L HART Operating Instructions BA01050F/00/EN

FMR54
Brief Operating Instructions KA01101F/00/EN
Description of Device GP01014F/00/EN

Parameters
G PROFIBUS PA Operating Instructions BA01126F/00/EN

Parameters
E FOUNDATION Fieldbus Operating Instructions BA01122F/00/EN

Parameters
Supplementary Application Package 1) Document type Document code

documentation
• EH: Heartbeat Verification + Monitoring Special documentation SD01871F/00/EN
• EJ: Heartbeat Verification
Device Document type Document code
Fieldgate FXA520 Technical Information TI369F/00/EN
Tank Side Monitor NRF590 Technical Information TI402F/00/EN
Operating Instructions BA256F/00/EN
Description of Device BA257F/00/EN

Parameters
Safety Instructions (XA) Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They
are an integral part of the Operating Instructions.
Feature Approval Available for Feature 020 "Power Supply; Output"

010 1) 2)
A B C 3) E 4)/G 5) K 6)/L 7)
BA ATEX: II 1 G Ex ia IIC T6-T1 Ga • FMR53 XA00677F XA00677F XA00677F XA00685F -

• FMR54
BB ATEX: II 1/2 G Ex ia IIC T6-T1 Ga/Gb • FMR53 XA00677F XA00677F XA00677F XA00685F -
• FMR54
BC ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb • FMR53 XA00680F XA00680F XA00680F XA00688F XA00680F
• FMR54
BD ATEX: II 1/2/3 G Ex ic [ia Ga] IIC T6-T1 • FMR53 XA00678F XA00678F XA00678F XA00686F XA00678F
Ga/Gb/Gc • FMR54
BG ATEX: II 3 G Ex nA IIC T6-T1 Gc • FMR53 XA00679F XA00679F XA00679F XA00687F XA00679F

• FMR54
Endress+Hauser 101

010 1) 2)
A B C 3) E 4)/G 5) K 6)/L 7)
BH ATEX: II 3 G Ex ic IIC T6-T1 Gc • FMR53 XA00679F XA00679F XA00679F XA00687F XA00679F

• FMR54
BL ATEX: II 1/2/3 G Ex nA [ia Ga] IIC T6-T1 • FMR53 XA00678F XA00678F XA00678F XA00686F XA00678F
Ga/Gb/Gc • FMR54
B2 ATEX: II 1/2 G Ex ia IIC T6-T1 Ga/Gb • FMR53 XA00683F XA00683F XA00683F XA00691F -
ATEX: II 1/2 D Ex ia IIIC Txx°C Da/Db • FMR54
B3 ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb • FMR53 XA00684F XA00684F XA00684F XA00692F XA00684F
ATEX: II 1/2 D Ex ta IIIC Txx°C Da/Db • FMR54
B4 ATEX:II 1/2 G Ex ia IIC T6-T1 Ga/Gb • FMR53 XA00681F XA00681F XA00681F XA00689F -
ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb • FMR54
CB CSA C/US XP Cl.I Div.1 Gr.A-D FMR54 XA01112F XA01112F XA01112F XA01114F -
CC CSA C/US XP Cl.I Div.1 Gr.A-D FMR54 XA01113F XA01113F XA01113F XA01115F XA01113F
C2 CSA C/US IS Cl.I,II,III Div.1 Gr.A-G, NI Cl.1 Div. • FMR53 XA01112F XA01112F XA01112F XA01114F -
2, Ex ia • FMR54
C3 CSA C/US XP Cl.I,II,III Div.1 Gr.A-G, NI Cl.1 • FMR53 XA01113F XA01113F XA01113F XA01115F XA01113F
Div.2, Ex d • FMR54
FA FM IS Cl.I Div.1 Gr.A-D FMR54 XA01116F XA01116F XA01116F XA01118F -
FB FM IS Cl.I,II,III Div.1 Gr.A-G, AEx ia, NI Cl.1 • FMR53 XA01116F XA01116F XA01116F XA01118F -
Div.2 • FMR54
FC FM XP Cl.I Div.1 Gr.A-D FMR54 XA01117F XA01117F XA01117F XA01119F XA01117F
FD FM XP Cl.I,II,III Div.1 Gr.A-G, AEx d, NI Cl.1 • FMR53 XA01117F XA01117F XA01117F XA01119F XA01117F
Div.2 • FMR54
IA IECEx: Ex ia IIC T6-T1 Ga • FMR53 XA00677F XA00677F XA00677F XA00685F -

• FMR54
IB IECEx: Ex ia IIC T6-T1 Ga/Gb • FMR53 XA00677F XA00677F XA00677F XA00685F -

• FMR54
IC IECEx: Ex d [ia] IIC T6-T1 Ga/Gb • FMR53 XA00680F XA00680F XA00680F XA00688F XA00680F
• FMR54
ID IECEx: Ex ic [ia Ga] IIC T6-T1 Ga/Gb/Gc • FMR53 XA00678F XA00678F XA00678F XA00686F XA00678F
• FMR54
IG IECEx: Ex nA IIC T6-T1 Gc • FMR53 XA00679F XA00679F XA00679F XA00687F XA00679F

• FMR54
IH IECEx: Ex ic IIC T6-T1 Gc • FMR53 XA00679F XA00679F XA00679F XA00687F XA00679F

• FMR54
IL IECEx: Ex nA [ia Ga] IIC T6-T1 Ga/Gb/Gc • FMR53 XA00678F XA00678F XA00678F XA00686F XA00678F
• FMR54
I2 IECEx: Ex ia IIC T6-T1 Ga/Gb • FMR53 XA00683F XA00683F XA00683F XA00691F -

IECEx: Ex ia IIIC Txx°C Da/Db • FMR54
I3 IECEx: Ex d [ia] IIC T6-T1 Ga/Gb • FMR53 XA00684F XA00684F XA00684F XA00692F XA00684F
IEXEx: Ex ta IIIC Txx°C Da/Db • FMR54
I4 IECEx: Ex ia IIC T6-T1 Ga/Gb • FMR53 XA00681F XA00681F XA00681F XA00689F -

IECEx: Ex d [ia] IIC T6-T1 Ga/Gb • FMR54
KA KC Ex ia IIC T6 Ga • FMR53 XA01045F XA01045F XA01045F XA01047F -

• FMR54
KB KC Ex ia IIC T6 Ga/Gb • FMR53 XA01045F XA01045F XA01045F XA01047F -

• FMR54
KC KC Ex d[ia] IIC T6 • FMR53 XA01046F XA01046F XA01046F XA01048F XA01046F

• FMR54
MA INMETRO: Ex ia IIC T6 Ga • FMR53 XA01286F XA01287F XA01288F XA01296F -

• FMR54
102 Endress+Hauser

010 1) 2)
A B C 3) E 4)/G 5) K 6)/L 7)
MC INMETRO: Ex d[ia] IIC T6 Ga/Gb • FMR53 XA01292F XA01292F XA01293F XA01298F XA01294F
• FMR54
MH INMETRO: Ex ic IIC T6 Gc • FMR53 XA01289F XA01290F XA01291F XA01297F -

• FMR54
NA NEPSI Ex ia IIC T6 Ga • FMR53 XA01199F XA01199F XA01199F XA01208F -

• FMR54
NB NEPSI Ex ia IIC T6 Ga/Gb • FMR53 XA01199F XA01199F XA01199F XA01208F -

• FMR54
NC NEPSI Ex d[ia] IIC T6 Ga/Gb • FMR53 XA01202F XA01202F XA01202F XA01211F XA01202F
• FMR54
NG NEPSI Ex nA II T6 Gc • FMR53 XA01201F XA01201F XA01201F XA01210F XA01201F

• FMR54
NH NEPSI Ex ic IIC T6 Gc • FMR53 XA01201F XA01201F XA01201F XA01210F XA01201F

• FMR54
N2 NEPSI Ex ia IIC T6 Ga/Gb, Ex iaD 20/21 T85… • FMR53 XA01205F XA01205F XA01205F XA01214F -
90oC • FMR54
N3 NEPSI Ex d[ia] IIC T6 Ga/Gb, DIP A20/21 • FMR53 XA01206F XA01206F XA01206F XA01215F XA01206F
T85…90oC IP66 • FMR54
8A FM/CSA IS+XP Cl.I,II,III Div.1 Gr.A-G • FMR53 • XA01112F • XA01112F • XA01112F • XA01114F -
• FMR54 • XA01113F • XA01113F • XA01113F • XA01115F
• XA01116F • XA01116F • XA01116F • XA01118F
• XA01117F • XA01117F • XA01117F • XA01119F
1) 2-wire; 4-20mA HART

2) 2-wire; 4-20mA HART, switch output
3) 2-wire; 4-20mA HART, 4-20mA
4) 2-wire; FOUNDATION Fieldbus, switch output
5) 2-wire; PROFIBUS PA, switch output
6) 4-wire 90-253VAC; 4-20mA HART
7) 4-wire 10.4-48VDC; 4-20mA HART
For certified devices the relevant Safety Instructions (XA) are indicated on the nameplate.
If the device is prepared for the remote display FHX50 (product structure: feature 030: Display,
Operation", option L or M), the Ex marking of some certificates changes according to the following
table 11):
Feature 010 Feature 030 ("Display, Ex marking

("Approval") Operation")
BG L or M ATEX II 3G Ex nA [ia Ga] IIC T6-T1 Gc
BH L or M ATEX II 3G Ex ic [ia Ga] IIC T6-T1 Gc
B3 L or M ATEX II 1/2G Ex d [ia] IIC T6-T1 Ga/Gb,

ATEX II 1/2D Ex ta [ia Db] IIIC Txx°C Da/Db
IG L or M IECEx Ex nA [ia Ga] IIC T6-T1 Gc
IH L or M IECEx Ex ic [ia Ga] IIC T6-T1 Gc
I3 L or M IECEx Ex d [ia] IIC T6-T1 Ga/Gb,

IECEx Ex ta [ia Db] IIIC Txx°C Da/Db
MH L or M Ex ic [ia Ga] IIC T6 Gc
NG L or M NEPSI Ex nA [ia Ga] IIC T6-T1 Gc
11) The marking of certificates not mentioned in this table are not affected by the FHX50.
Endress+Hauser 103
Feature 010 Feature 030 ("Display, Ex marking

("Approval") Operation")
NH L or M NEPSI Ex ic [ia Ga] IIC T6-T1 Gc
N3 L or M NEPSI Ex d [ia] IIC T6-T1 Ga/Gb, DIP A20/21 [ia D] TA, Txx°C
IP6X
104 Endress+Hauser
Registered trademarks
HART®
Registered trademark of the FieldComm Group, Austin, USA
PROFIBUS®
Registered trademark of the PROFIBUS User Organization, Karlsruhe, Germany
FOUNDATIONTM Fieldbus
Registered trademark of the FieldComm Group, Austin, Texas, USA
KALREZ®, VITON®
Registered trademark of DuPont Performance Elastomers L.L.C., Wilmington, USA
TEFLON®
Registered trademark of E.I. DuPont de Nemours & Co., Wilmington, USA
TRI CLAMP®
Registered trademark of Alfa Laval Inc., Kenosha, USA
Patents
This product may be protected by at least one of the following patents.
Further patents are pending.
US Patents EP Patents
5.948.979 882 957
6.087.978 955 527
6.140.940 -
6.155.112 834 722
- 882 955
6.266.022 1 083 413
6.295.874 210 567
6.512.358 1 301 914
6.606.904 -
6.640.628 -
6.679.115 1 360 523
- 1 389 337
6.779.397 -
7.201.050 -
7.412.337 -
7.552.634 -
7.730.760 -
7.819.002 -
- 1 774 616
7.966.141 -
8.040.274 -
8.049.371 -
Endress+Hauser 105
*71344171*
71344171
www.addresses.endress.com

FMR53 DS

Uploaded by

Copyright:

Available Formats

FMR53 DS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FMR53 DS

Uploaded by

Copyright:

Available Formats

TI01041F/00/EN/07.

16 Products Solutions Services

Level measurement in liquids

Important document information . . . . . . . . . . . . . . . 4 Degree of protection . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Operability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Ordering information . . . . . . . . . . . . . . . . . . . . . . . 88

Registered trademarks . . . . . . . . . . . . . . . . . . . . . 105

Important document information

Direct current and alternating current

Protective ground connection

Symbols for certain types of information

1, 2, 3 ... Item numbers

A-A, B-B, C-C, ... Sections

Safe area (non-hazardous area)

Symbols at the device

Temperature resistance of the connection cables

Function and system design

1 Setup parameters of the Micropilot

Life cycle of the product

Measuring range Maximum measuring range

Device Maximum measuring range

FMR53 20 m (66 ft)

FMR54 - horn antenna 20 m (66 ft)

FMR54 - planar antenna in stilling well 38 m (125 ft)

Usable measuring range

A 1.4 to 1.9 non-conducting liquids, e.g. liquefied gas 1)

B 1.9 to 4 non-conducting liquids, e.g. benzene, oil, toluene, …

C 4 to 10 e.g. concentrated acids, organic solvents, esters, aniline, alcohol, acetone, …

1) Treat Ammonia NH3 as a medium of group A.

Device Storage tank Buffer tank

Calm product surface (e.g. intermittent filling, filling from bottom,

Antenna type and size Antenna type and size

FMR53 Rod 390 mm (15 in) - Rod 390 mm (15 in) -

Measuring range [m (ft)]

Device Process tank with agitator Stilling well Bypass

Turbulent surface (e.g. filling from above,

A Antenna type and size

FMR54 Horn Horn 200 mm (8 in) Horn Planar Horn

Measuring range [m (ft)]

Operating frequency C-band (~ 6 GHz)

Transmitting power Distance Average energy density in beam direction

1 m (3.3 ft) < 12 nW/cm2

5 m (16 ft) < 0.4 nW/cm2

Signal coding FSK ±0.5 mA over current signal

Data transmission rate 1 200 Bit/s

Galvanic isolation Yes

Signal coding Manchester Bus Powered (MBP)

Data transmission rate 31.25 kBit/s, voltage mode

Galvanic isolation Yes

Signal coding Manchester Bus Powered (MBP)

Data transmission rate 31.25 kBit/s, voltage mode

Galvanic isolation Yes

Function Open collector switching output

Failure mode non-conductive

Electrical connection U = 10.4 to 35 VDC, I = 0 to 40 mA

Internal resistance RI < 880 Ω

Number of switching cycles corresponds to the measuring cycle

Signal source • Level linearized

Number of switching cycles unlimited

Signal on alarm Depending on the interface, failure information is displayed as follows: