Name: EDISON A.

WALIT …
Designation: QC Inspector
Applying for the Position of: QC Inspector (Piping / Welding) Photo here

Company: China Petroleum Pipeline Engineering Co. Ltd

SUMMARY OF WORK EXPERIENCE

Total Experience 13 years

Experience in Oil & Gas Plant 8 years

Experience in Similar Capacity 5 years

Srl.
Nos Company Designation Working Period
(from Present ~ Previous)
.
AL ASAB GEN. TRANS. AND CONST. LLC - QC WELDING SEPT 2019 - MARCH
1
UAE INSPECTOR 2020
VENTANAS PHIL. CONST. INC/ POSCO QA/QC MECHANICAL
2 SEPT 2017 - AUG 2019
E&C ENGINEER
JUNE 2015 - APRIL
3 KEPCO KPS PHIL. CORP WELDING ENGINEER
2017
JULY 2008 - MARCH
4 STA CLARA INTERNATINAL CORP SR. QC ENGINEER
2014

5 AMD CONSTRUCTION CORP SITE ENGINEER MAY 2006 – OCT 2007

APRIL 2005 – MAY

6 BARRON ENGINEERING CADET/SITE ENGINEER
2006

EDUCATIONAL QUALIFICATIONS

● Bachelor of Science in Mechanical Engineering (1999-2004) Graduate

PROFESSIONAL QUALIFICATIONS

 Mechanical Engineer
 CSWIP 3.1 Certificate Number 306497
 ASNT Level II in (VT, MT, PT, UT, RT, RTFI)
 ADNOC Onshore Approved Welding Inspector
RELEVANT TRAININGS & CERTIFICATIONS

Page 1 of 7
 Course Title Entity / Location

CSWIP 3.1 TWI Technology (S.E ASIA) SDN BHD Malaysia

UT Level 2 and 3 Philippine Society for Nondestructive Testing Inc.

PT Level 2 and 3 Philippine Society for Nondestructive Testing Inc.

MT Level 2 and 3 Philippine Society for Nondestructive Testing Inc.

RT Level 2 Philippine Society for Nondestructive Testing Inc.

RTFI Apex Engineering Services Philippines

Certified Welding Inspector Philippine welding Society Philippines

Japan Welding Engineering Society/Philippine

Welding Engineer
Welding Society Philippines
Basic NDT (MT,PT,UT,RT) Apex Engineering Services Philippines
The Proper Installation and Shaft Petro Era One (Workshop Center) Philippines
Alignment of Mechanical Equipment
SKF Philippines Inc.- Training Solution
Bearing Technology and Maintenance

PERSONAL DETAILS

Email Address: walitedison@yahoo.com

Philippines Address: Purok Everlasting Brgy. Cutar Aritao Nueva Vizcaya Philippines 3704

Date of Birth: 05 October 1979

Religion: Christian

Nationality: Filipino

Languages Known: English, Tagalog, Ilocano

UAE Contact No.: +971 504481492

Passport No.: P2599262A

Availability: Available Immediately

WORK EXPERIENCES

Name of Project: EPC for Asab Phase II Stage1 Project (ADNOC Gas Field)

Page 2 of 7
Position Held: QC Welding Inspector
Employer: Al Asab General Transport and Contracting Establishment
Address: M-15 Mussafah Industrial Area, Abu Dhabi, UAE

Duties and Responsibilities:

 Reviewed Welding Procedure Specification (WPS), Procedure Qualification Record (PQR),

Inspection and Test Plan (ITP) and NDT Procedure in accordance to project specification and
applicable code and standard.
 Conducted material inspection and Verifies mill certificate and other related reports of incoming raw
materials in conformance to project and client specification.
 Preparation of pWPS, PQR, WPS and coordinate with ADNOC TPI’s to witnessed conducting of
PQR and review NDT report, mechanical test report final approval of WPS and submitted to client
 Supervised and witnessed Welder Performance Qualification Record (WQTR), prepare certificate
ID’s and maintained the records to ensure the welder are qualified and certificate update in
accordance to company procedure.
 Conducted surveillance inspection in fabrication shop and field fabrication to ensure conformance to
client project specification, approved drawing, ITP and company quality procedure.
 Conducted Joint fit up, dimensional inspection, weld visual inspection as per approved welding
procedure specification (WPS) and drawing in fabrication shop and field welding works.
 Preparation of pipeline and piping report ovality/gauging, stringing, cold bend, fit up and weld visual,
welder performance report (Pipeline Flow Lines)
 Reviewed Nondestructive Examination Testing Report (VT, UT, MT, PT, and RT), Radiographic
Film and PMI and PWHT report.
 Coordinates tie-in point during shutdown activities and request mandatory (PWHT, NDT, Hardness
Test)
 Conducted walkdown inspection of pipelines and piping with the client, preparation of punchlist,
inspection closed out category a punchlist prior to hydrotest and witnessed hydrotest.
 Knowledge in conducting VT, MT, PT, UT, RT and PMI and review result with standard specification
and prepared final report
 Familiar with the used of the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII
Div. 1, ASME B31.1, ASME B31.3, B31.4, B31.8 ISO 13874 API 1104, API 650, API 686 and shell
DEP’s.
 Hands on experience welding of piping materials carbon steel and LTCS, chromoly steel (P11, P12,
P22, P91 and P92), stainless steel, duplex and super duplex steel and Inconel steel.

Name of Project: 2 X 300MW Masinloc Power Plant Expansion Project (Coal fired Power Plant)
Position Held: QA/QC Mechanical Engineer
Employer: Ventanas Philippines Construction Incorporated (POSCO E&C

Page 3 of 7
Address: Brgy. Bani Masinloc Zambales, Philippines

Duties and Responsibilities:

 Reviewed Welding Procedure Specification (WPS), Procedure Qualification Record (PQR),

Inspection and Test Plan (ITP) and NDT Procedure in accordance to project specification and
applicable code and standard.
 Conducted material inspection and Verifies mill certificate and other related reports of incoming raw
materials in conformance to project and client specification.
 Conducted surveillance and audit during Fabrication and Field Erection of Structural Steel, Piping,
Storage Tanks and Boiler Tube accordance to approved project Specifications, plans, drawing and
applicable code and standard.
 Reviewed Nondestructive Examination Testing Report (VT, UT, MT, PT, and RT) and Radiographic
Film.
 Supervised and witnessed Welder Performance Qualification Record (WQTR) and maintained the
records to ensure the welder are qualified and certificate update in accordance to company
procedure.
 Conducted welding Joint Preparation inspection, Joint fit up and dimensional inspection and weld
visual inspection as per approved welding procedure specification (WPS) and drawing in fabrication
and field welding works.
 Reviewed Test Package and witnessed hydrostatic of piping and tanks.
 Walk down inspection and prepared final punchlist with the client
 Verify preheat; inter pass Temperature and heat treatment (PWHT) before, during and after
welding.
 Witnessed sand blasting, Painting Coating and Wrapping, Dry Film Thickness and Holiday Test of
structural steel, piping tanks and Coal Silo.
 Managed subcontractor activities and welding repair to ensure all welding followed in accordance to
WPS and ensured welding repair are fulfilled.
 familiar with the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII Div. 1,
ASME B31.1, ASME B31.3, API 1104, API 650 and API 686.
 Knowledge of the weldability of ASME P-No. 1, 3, 4, 5A, 5B and 8 base metals and dissimilar metal,
selecting the welding process, filler metals, pre- heat and heat treatment (PWHT).
 Conducted foundation inspection for static and rotating equipment, levelling, mounting plate, bolt
projection and centering.
 Witnessed pre- alignment prior to grouting and final alignment of rotating equipment.
 Inspection of static equipment such horizontal and vertical pressure vessel elevation, centering and
plumbness prior to grouting.

Name of Project: 2 X 135MW CFB Coal Fired Power Plant

Page 4 of 7
Position Held: Welding Engineer
Employer: KEPCO KPS Philippines Corp.
Address: Km117 National Highway, Puting Bato West, Calaca, Batangas, Philippines

Duties and Responsibilities:

 Developed and qualified new Welding Procedure Specification (WPS) and procedure qualification
record (PQR) in accordance to client specification and applicable code and standard.
 Developed welding repair procedure and managed welding repair technique any welding failure in
the plant and apply applicable nondestructive testing.
 Developed nondestructive examination procedure (VT, MT, PT, UT, and RT) in accordance to
applicable code and standard and advance knowledge in nondestructive examination.
 Supervised and witnessed Welder Performance Qualification Record (WQTR) and maintained the
records to ensure the welder are qualified and certificate update in accordance to company
procedure.
 Conducted inspection in a mechanical discipline including field construction installation, repair and
maintenance such as boiler drum, dearator, condenser, storage tank, pressure vessel piping, steel
structure, valve installation and replacement, boiler tube leakage at furnace and HRA area to
identify the failure mechanism.
 Evaluate NDT test result and Review Radiograph Film and prepared ultrasonic thickness survey
report in boiler tube, piping, tanks and pressure vessel.
 Responsible for the selection of welding equipment, accessories, welding consumable, welding
process /es used advancement of welding techniques and knowledge of the weldability of ASME P-
No. 1, 3, 4, 5A, 5B and 8 base metals, dissimilar metal welding and repair of cast iron, pre-heat and
heat treatment (PWHT)
 Managed welding activities including subcontractor and welding repair to ensure all welding
followed in accordance to WPS including welding repair are fulfilled.
 familiar with the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII Div. 1,
ASME B31.1, ASME B31.3, API 1104 and API 650.
 Managed and Coordinates subcontractor during repair and maintenance work activities in the plant.
 Prepared field inspection report and warranty claim report during commissioning period.

Name of Project: Assign in Different Project (Oil and Gas, Power Plant, Manufacturing Plant, Building, Bridge)

Page 5 of 7
Position Held: Senior QC Engineer / NDT Supervisor / Welding Inspector / NDT Inspector
Employer: Sta. Clara International Corporation
Address: Gov. Drive Cabilang Baybay Carmona, Cavite, Philippines

Job Descriptions:

 Developed Inspection and Test Plan (ITP), Quality Assurance Plan (QAP), Fabrication procedure
and NDT procedure.
 Developed welding procedure specification (WPS) and prepared procedure qualification record
(PQR) as per Project and client specification in accordance to applicable code and standard.
 Reviewed subcontractor ITP, WPS, and PQR, Quality Assurance Plan (QAP), and NDT procedure,
fabrication procedure, blasting and painting procedure and material certificates in accordance to
project specification and applicable code and standard.
 Supervised and witnessed Welder Performance Qualification Record (WPQR) as per Project and
client requirements in accordance to applicable code and standard.
 Supervised and trained Jr. QC Engineer, NDT Trainee, NDT Level 1 and NDT Level 2 in Welding
Inspection and NDT Inspection (VT, PT, MT, UT and holiday testing).
 Conducted material inspection and Verifies mill certificate and other related reports of incoming raw
materials in conformance to project and client specification.
 Conducted surveillance and audit during Fabrication and Field Erection of Structural Steel, Piping
and storage Tanks according to approved project Specifications, plans, drawing and applicable
code and standard.
 Conducted welding Joint Preparation inspection, Joint fit up and dimensional inspection and weld
visual inspection as per approved welding procedure specification (WPS) and drawing in fabrication
and field welding works.
 Performed Nondestructive Testing using Visual Inspection (VT) Ultrasonic Examination (UT),
Magnetic Particle Examination (MT), liquid Penetrant Examination (PT) and Holiday Test in
accordance to approved company NDT procedure.
 Reviewed Nondestructive Examination Testing Report (VT, UT, MT, PT, and RT) and Radiographic
Film.
 Prepared and reviewed Test Package and witnessed hydrostatic of piping and tanks
 familiar with the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII Div. 1,
ASME B31.1,ASME B31.3, API 1104 and API 650.
 Knowledge of the weldability of ASME P-No. 1, 3, 4, 5A, 5B and 8 base metals and dissimilar metal,
selecting the welding process, filler metals, pre- heat and heat treatment (PWHT).
 Witnessed sand blasting and painting of structural steel, piping and tanks.
 Carry out supplier and vendor material inspection and prepare report.

Name of Project: Bank central of the Philippines Rehabilitation & Upgrade Security Plant

Page 6 of 7
Position Held: Site Engineer
Employer: AMD Construction Corporation
Address: East Avenue, Quezon City, Philippines

Job Descriptions:

 Supervises the work activities of the project site to assure the successful implementation of the
project in relation to the company budget in terms of money, time and clients contract requirements
satisfaction.
 Assist the Manager in the review and evaluation periodically of the actual performance of the project
including assign of personnel.
 Attend the periodic meeting as required by the project as well as the management.
 Coordinate and discuss problems encountered in the implementation of work to the designer,
project management, group owner representative, or the other trade contractors and recommends
solutions to the problem.
 Supervised installation of Piping, Plumbing Fixture and Fire Protection in a Building Construction.
 Supervised fabrication of piping and welding works activities base on approved plan and drawing.

Name of Project: Manalo Ice Plant (Ice Plant 60 Tons Capacity)

Position Held: Cadet Engr. /Site Engineer
Employer: Barron Engineering Supplies Inc.
Address: Lemery, Batangas, Philippines

Job Descriptions:

 Responsible for the installation of Mechanical Equipment such as compressor, cooling tower, pump,
condenser, liquid receiver, traveling crane, piping installations and welding works.
 Supervised fabrication of condenser, Liquid Receiver, Oil Separator, Brine tank, piping and welding
works activities on Fabrication and on site.
 Supervises the work activities of the project site to assure the successful implementation of the
project.
 Monitoring of the Quality Performance of Project as well as Welding works, Installation of
Equipment, Piping Fittings prior to welding and Material Inspections
 Directly Reported to the Project Manager assigned.

Page 7 of 7