RELEASE M.5.

B Q1

INDEX SECTION Q:

 NEW ITR® UNIK LINE

 MATERIAL MECHANICAL PROPERTIES Q4

 BUCKET TIP PROFILES EXCAVATORS Q5

 BUCKET TIP PROFILES LOADERS Q5

 ITR® UNIK TIPS by FAMILY Q6

 MACHINE MODELS CAT® STYLE TIPS Q8

 ITR ® UNIK TIPS: SUMMARIZING TABLE & CAT® “J” IDENTIFICATION Q9

 ITR® UNIK TIPS for EXCAVATOR

 ITR® UNIK TIGER LONG TIPS Q10

 ITR® UNIK TWIN TIGER LONG TIPS Q11

 ITR® UNIK PENETRATION TIPS Q12

 ITR® UNIK LONG TIPS Q13

 ITR® UNIK SYMMETRICAL TIPS Q14

 ITR® UNIK ROCK CHISEL TIPS Q15

 ITR® UNIK ROCK ABRASION TIPS Q16

 ITR® UNIK TIPS for LOADER

 ITR® UNIK ABRASION PENETRATION TIPS Q17

 ITR® UNIK HEAVY DUTY ABRASION TIPS Q17

 ITR® UNIK LONG for LOADER TIPS Q18

Q2 RELEASE M.5.B
RELEASE M.5.B Q3

NEW ITR ® UNIK LINE DESIGN IS STUDIED FOR EVERY APPLICATION WHERE HIGH
PENETRATION AND IMPACT ARE REQUESTED.

 Excellent digging performance with

innovative and modern self-sharpening
design which improves the productivity
of the machine;

STANDARD CATERPILLAR ® TIP UNIK ® TIP

 Innovative and reinforced

pocket structure

 Inncreased side pin protection

 Special impact resistance

Q4 RELEASE M.5.B

MATERIAL MECHANICAL PROPERTIES

Tensile
TYPE of ITR ® Resilience Resiliance
APPLICATIONS Strength Elongation HRC
PRODUCT MATERIAL AKV AKV -40°
(Mpa)

Good resistance to abrasion and

SMALL TIP impact. The characteristics are
UNC-2 1450 - 1650 ≥6% ≥ 25 J/cm2 ≥ 22,5 J/cm2 48 - 52
Below 10 Kg maintained even when the part
warms up in working conditionns.

Maximum resistance to abrasion

MEDIUM TIP and impact. The characteristics
UNC-4 1450 - 1650 ≥6% ≥ 31 J/cm2 ≥ 22,5 J/cm2 48 - 52
from 10 to 20 Kg are maintained even when the part
warms up in working conditionns.

Maximum resistance to abrasion

LARGE TIP and impact. The characteristics
UNP-4 ≥ 1700 ≥3% ≥ 35 J/cm2 ≥ 28 J/cm2 49 - 54
Up to 20 Kg are maintained even when the part
warms up in working conditionns.
RELEASE M.5.B Q5

BUCKET TIP PROFILES EXCAVATORS

MOST
Penetrative UNIK® PROFILE TYPE PICTURE FEATURES and BENEFIT

 Unmatched penetration in frost, rock or hardpan conditions;

TIGER
 Stays sharp.

 More penetration longer than TIGER;

TWIN TIGER  Less leverage than TIGER requiring more breckout force from the
Excavator.

 Good penetration Tip;

 Stays sharp throughout life;
PENETRATION
 Average wear material;
 Good for lightly packed rock shale & clay.

 Multi purpose general duty tip;

LONG
 Good choise for most basic applications;

 Good penetration & digging action in most medium to hard pack

conditions;
SYMMETRICAL
 Vertical rib on both sides manteins sharp point W/ average
amount of wear material.

 Best for use on rock or hard ground;

ROCK CHISEL  Remains sharp throughout life;

 Good leverage takes pressure off machine & bucket improving
performance & lifespan.

LESS  Similar to ROCK CHISEL but much more wear material on

Penetrative ROCK ABRASION underside of tip;
 Best for use on any high abrasion application.

BUCKET TIP PROFILES LOADER

UNIK® PROFILE TYPE PICTURE FEATURES and BENEFIT

 Tip with much wear material on underside of tip;

ABRASION PENETRATION
 Best for use on any high abrasion application.

 Similar to Abrasion Penetration; tip with much wear material on

HEAVY DUTY ABRASION underside of tip
 Best for use on any high abrasion application.

 Tip specifically designed for loader applications;

LONG for LOADER
 Best for use on abrasion application.
Q6 RELEASE M.5.B

ITR® UNIK TIPS by FAMILY

J200 J225 J250 J300 J350

T I P S - Excavator

1U3202TLU 6Y3222TLU 1U3252TLU 1U3302TLU 1U3352TLU

- - - 1U3302WTLU 1U3352WTLU

- - - 9J4309U 9J4359U

1U3202U 6Y3222U 1U3252U 1U3302U 1U3352U

1U3202SYLU 6Y3222SYLU 1U3252SYLU 1U3302SYLU 1U3352SYLU

1U3202RCU 6Y3222RCU 1U3252RCU 1U3302RCU 1U3352RCU

T I P S - Loader

1U3202LU - 1U3252LU 1U3302LU 1U3352LU

1U3202PTU 6Y3222PTU 1U3252PTU 1U3302PTU 1U3352PTU

6Y3228 (STD) 9J2258 (STD) 1073308 (STD) 9W2678 (STD)

8E6208 (STD)
1324762 (HD) 1324763 (HD) 1324766 (HD) 1140358 (HD)

8E6259 (STD) 8E6259 (STD) 8E6259 (STD) 8E6359 (STD)

8E6209 (STD)
1495733 (HD) 1495733 (HD) 1495733 (HD) 1140359 (HD)

A D A P T E R S
4T1204 [13~25] - 1U1254 [19~32] 1U1304 [25~38] 1U1354 [32~45]

1U1350 (C) [32~45]

8J7525 [13~19] - 3G0169 [25~32] 9J8929 [25~32] 1U1351 (R) [32~45]
1U1352 (L) [32~45]

3G8354 (C) [43]

9W1304 (C) [34]
3G8355 (R) [43]
8E9490 (C) [38]
1193205 (C) [22] 6Y3224 (C) [23] 3G8356 (L) [43]
1193253 (C) [27] 3G6304 (C) [33]
1193204 (C) [27] 6Y3224A (C) [27] 6I6354 (C) [43]
Excavator 3G6305 (R) [33]
6I6355 (R) [43]
3G6306 (L) [33]
6I6356 (L) [43]

1359354 (C) [43]

- - - - 1359355 (R) [43]
Loader 1359356 (L) [43]

8E2184 [22] 3G9307 [32] 3G3357 [41]

- 1U0257 [27]
9J4207 [20] 4T4307 [33] 1U1357 [47]

3G1357 [34]
- - - 3G5307 [32]
3G2357 [45]

1U2208 (L) [22] 3G4258 (L) [27] 3G4308 (L) [33] 3G5358 (L) [43]
-
1U2209 (R) [22] 3G4259 (R) [27] 3G4309 (R) [33] 3G5359 (R) [43]

6I9250 (L) [27] 8E5308 (L) [33] 8E5358 (L) [32~38]

- -
6I9251(R) [27] 8E5309(R) [33] 8E5359 (R) [32~38]

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

(C) Centre; (R) Right; (L) Left.

[…]: Adapter GAP [mm]
RELEASE M.5.B Q7

ITR® UNIK TIPS by FAMILY

J400 J450/J460 J550 J600 J700 J800

T I P S - Excavator
7T3402TLU 1U3452TLU 9W8552TLU 6I6602TLU 4T4702TLU -

7T3402WTLU 1U3452WTLU 9W8552WTLU 6I6602WTLU - -

6Y7409U 9W8459U 9W8559U 7I7609U 4T4709U -

7T3402U 9W8452U 9W8552U 6I6602U 4T4702U 6I8802U

7T3402SYLU 9W8452SYLU 9W8552SYLU 6I6602SYLU - -

7T3402RCU 1U3452RCU 1U3552RCU 6I6602RCU 4T4702RCU -

- - - 1359600CEU 1359700CEU 1359800CEU

T I P S - Loader

7T3402PTU 9W8452PTU 9W8552PTU 6I6602PTU 4T4703PTU 6I8802PTU

- - - - - 6I8803U

6Y2527 (STD-J450)
7T3408 (STD) 6Y8558 (STD) 6I6608 (STD) 4T4708 (STD)
8E0468(STD-J460) 1341808 (HD)
1167408 (HD) 1073378 (HD) 1139608 (HD) 1134708 (HD)
1140468 (HD-J460)

8E6359 (STD-J450)
8E8409 (STD) 8E5559 (STD) 6I6609 (STD) 4T4707 (STD)
8E8469 (STD-J460) 1341809 (HD)
1167409 (HD) 1078559 (HD) 1139609 (HD) 1134709 (HD)
1073469 (HD-J460)

A D A P T E R S

- **8E0464 [45~51] - - - -

6I6404 (C) [50] 1590464 (C) [54] 6I6554 (C) [63] 6I6604 (C) [82] UEAJ70.80E [80]
6I6405 (R) [50] 1590465 (R) [54] 6I6555 (R) [63] 6I6605 (R) [82] UEAJ70.90E [90] UEAJ80.100E [100]
Excavator 6I6406 (L) [50] 1590466 (L) [54] 6I6556 (L) [63] 6I6606 (L) [82] UEAJ70.100E [100]

1140464 (C) [51] 1073554 (C) [67] 1324704 (C) [82]

6I8604 (C) [75]
1258404 (C) [48] 1140465 (R) [51] 1073555 (R) [67] 1007416 (C) [103] 6I8804 (C) [105]
(1198604)
Loader 1140466 (L) [51] 1073556 (L) [67] 1711704 (C) [80]

6I9898 [48] - - - - -

6I8244 (L) [48]

- - - - -
6I8243 (R) [48]

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

(C) Centre; (R) Right; (L) Left.

[…]: Adapter GAP [mm]
Q8 RELEASE M.5.B

MACHINE MODELS
CAT® STYLE TIPS

SIZE MACHINE MODELS

J200 215, 219, 416, 426, 428, 436, 910, 931, 935, 307, IT12

J225 446, 307, 933, 938, 939, 914G, E70, E70B

916 THRU 920, 922, 924, 926, 930, 935, 936, 939, 941, 943, 950, 951, 953, 983, 205 THRU 241, 225
J250 229, 311, 312, 320, IT1, IT18, IT28

615, J619, J621, 623, 950, 955, 960, 963, 953B THRU 966, 980, 983, 988, 992, E180, 215, 219, 235
J300 205 THRU 214, 315, 320, 322

633, 639, 960, 963, 966B, 966D, 966E, 966F, 973, 977, 980, 980B, 980C, E180, E240, 213B, 214B
J350 215 THRU 229, 320, 245, 318, 322, 325, 330, IT1

J400 231D, 980,980C, 980G, 322, 325, 330

J450/J460 966D, 973, 980, 980C, 983, 988, 988B, 988G/H, 225, E300(D/E/F), 235, 235FS, 325, 330, 345, 350

J550 235, 245, 245FS, 350, 375, 5130, 983, 988, 988B, 990, 992, 992B, 992C, 992G

J600 990, 992, 992G, 375, 5080, 5110B

J600 990, 992, 992G, 375, 5080, 5110B

J700 990, 992, 992C, 992G, 994, 375, 5080

J800 385 (JB), 994

RELEASE M.5.B Q9

ITR ® UNIK TIPS:

SUMMARIZING TABLE

EXCAVATOR LOADER

UNIK UNIK UNIK UNIK

UNIK UNIK UNIK UNIK UNIK UNIK
SIZE Twin Tiger Abrasion Heavy Duty Long for
Tiger Long Penetration Long Symmetrical Rock Chisel Rock Abrasion
Long Penetration Penetration Loader

J200 1U3202TLU - - 1U3202U 1U3202SYLU 1U3202RCU - 1U3202PTU - -

J225 6Y3222TLU - - 6Y3222U 6Y3222SYLU 6Y3222RCU - 6Y3222PTU - -

J250 1U3252TLU - - 1U3252U 1U3252SYLU 1U3252RCU - 1U3252PTU - -

J300 1U3302TLU 1U3302WTLU 9J4309U 1U3302U 1U3302SYLU 1U3302RCU - 1U3302PTU - 1U3302LU

J350 1U3352TLU 1U3352WTLU 9J4359U 1U3352U 1U3352SYLU 1U3352RCU - 1U3352PTU - 1U3352LU

J400 7T3402TLU 7T3402WTLU 6Y7409U 7T3402U 7T3402SYLU 7T3402RCU - 7T3402PTU - -

J450/J460 1U3452TLU 1U3452WTLU 9W8459U 9W8452U 9W8452SYLU 1U3452RCU - 9W8452PTU - -

J550 9W8552TLU 9W8552WTLU 9W8559U 9W8552U 9W8552SYLU 1U3552RCU - 9W8552PTU - -

J600 6I6602TLU 6I6602WTLU 7I7609U 6I6602U 6I6602SYLU 6I6602RCU 1359600CEU 6I6602PTU - -

J700 4T4702TLU - 4T4709U 4T4702U - 4T4702RCU 1359700CEU 4T4703PTU - -

J800 - - - 6I8802U - - 1359800CEU 6I8802PTU 6I8803U -

CAT® “J” IDENTIFICATION “J” IDENTIFICATION FAMILY

CORRESPONDING DIMENSIONS: K

J200 51 mm

J225 56 mm

J250 63,5 mm

J300 76 mm

J350 89 mm

J400 101,6 mm

J450 114 mm

J550 140 mm

J600 152 mm

J700 178 mm

J800 203 mm
Q 10 RELEASE M.5.B

ITR® UNIK TIGER LONG TIPS

DENTI UNIK TIGER LONG TIPO ITR®
DIENTES TIGER LONG DE TIPO ITR®
DENTS UNIK TIGER LONG TYPE ITR®
UNIK TIGER LONG ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1U3202TLU 165 6 65 57 1,3 8E6208 (STD) 8E6209 (STD) J200

6Y3228 (STD) 8E6259 (STD)

6Y3222TLU 200 7 84 69 2,3 J225
1324762 (HD) 1495733 (HD)

9J2258 (STD) 8E6259 (STD)

1U3252TLU 215 9 95 78 3 J250
1324763 (HD) 1495733 (HD)

1073308 (STD) 8E6259 (STD)

1U3302TLU 240 10 111 93 4,4 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

1U3352TLU 286 12 122 106 6,8 J350
1140358 (HD) 1140359 (HD)

7T3408 (STD) 8E8409 (STD)

7T3402TLU 318 14 141 127 10,6 J400
1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

J450
1U3452TLU 360 13 144 140 14,5 8E0468 (STD-J460) 8E8469 (STD-J450)
J460
1140468 (HD-J460) 1073469 (HD-J460)

6Y8558 (STD) 8E5559 (STD)

9W8552TLU 381 15 162 160 18,2 J550
1073378 (HD) 1078559 (HD)

6I6608 (STD) 6I6609 (STD)

6I6602TLU 457 18 198 202 36 J600
1139608 (HD) 1139609 (HD)

4T4708 (STD) 4T4707 (STD)

4T4702TLU 483 20 212 205 40 J700
1134708 (HD) 1134709 (HD)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
RELEASE M.5.B Q 11

ITR® UNIK TWIN TIGER LONG TIPS

DENTI UNIK TWIN TIGER LONG TIPO ITR®
DIENTES UNIK TWIN TIGER LONG DE TIPO ITR®
DENTS UNIK TWIN TIGER LONG TYPE ITR®
UNIK TWIN TIGER LONG ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1073308 (STD) 8E6259 (STD)

1U3302WTLU 243 102 110 88 5 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

1U3352WTLU 286 121 117 104 7,5 J350
1140358 (HD) 1140359 (HD)

7T3408 (STD) 8E8409 (STD)

7T3402WTLU 318 141 132 122 11,8 J400
1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

J450
1U3452WTLU 331 182 150 146 15,2 8E0468 (STD-J460) 8E8469 (STD-J450)
J460
1140468 (HD-J460) 1073469 (HD-J460)

6Y8558 (STD) 8E5559 (STD)

9W8552WTLU 381 184 155 160 19,6 J550
1073378 (HD) 1078559 (HD)

6I6608 (STD) 6I6609 (STD)

6I6602WTLU 457 235 190 200 37,6 J600
1139608 (HD) 1139609 (HD)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
Q 12 RELEASE M.5.B

ITR® UNIK PENETRATION TIPS

DENTI UNIK PENETRATION TIPO ITR®
DIENTES UNIK PENETRATION DE TIPO ITR®
DENTS UNIK PENETRATION TYPE ITR®
UNIK PENETRATION ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1073308 (STD) 8E6259 (STD)

9J4309U 218 27 106 90 4,4 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

9J4359U 239 34 116 104 5,8 J350
1140358 (HD) 1140359 (HD)

7T3408 (STD) 8E8409 (STD)

6Y7409U 265 35 135 123 9 J400
1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

J450
9W8459U 317 39 139 142 12,3 8E0468 (STD-J460) 8E8469 (STD-J460)
J460
1140468 (HD-J460) 1073469 (HD-J460)

6Y8558 (STD) 8E5559 (STD)

9W8559U 330 52 150 162 16,2 J550
1073378 (HD) 1078559 (HD)

6I6608 (STD) 6I6609 (STD)

7I7609U 410 62 192 200 34 J600
1139608 (HD) 1139609 (HD)

4T4708 (STD) 4T4707 (STD)

4T4709U 419 64 216 220 41,5 J700
1134708 (HD) 1134709 (HD)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
RELEASE M.5.B Q 13

ITR® UNIK LONG TIPS

DENTI UNIK LONG TIPO ITR®
DIENTES UNIK LONG DE TIPO ITR®
DENTS UNIK LONG TYPE ITR®
UNIK LONG ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1U3202U 146 36 67 63 1,2 8E6208 (STD) 8E6209 (STD) J200

6Y3228 (STD) 8E6259 (STD)

6Y3222U 168 46 85 75 2,4 J225
1324762 (HD) 1495733 (HD)

9J2258 (STD) 8E6259 (STD)

1U3252U 192 49 91 81 2,8 J250
1324763 (HD) 1495733 (HD)

1073308 (STD) 8E6259 (STD)

1U3302U 214 56 103 93 4,4 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

1U3352U 246 63 115 109 6,8 J350
1140358 (HD) 1140359 (HD)

7T3408 (STD) 8E8409 (STD)

7T3402U 273 74 134 126 10,5 J400
1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

J450
9W8452U 294 82 139 142 12,4 8E0468 (STD-J460) 8E8469 (STD-J460)
J460
1140468 (HD-J460) 1073469 (HD-J460)

6Y8558 (STD) 8E5559 (STD)

9W8552U 336 101 154 165 19 J550
1073378 (HD) 1078559 (HD)

6I6608 (STD) 6I6609 (STD)

6I6602U 393 127 186 207 36,4 J600
1139608 (HD) 1139609 (HD)

4T4708 (STD) 4T4707 (STD)

4T4702U 418 140 212 211 44,8 J700
1134708 (HD) 1134709 (HD)

6I8802U 490 167 262 259 85 1341808 (HD) 1341809 (HD) J800

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
Q 14 RELEASE M.5.B

ITR® UNIK SYMMETRICAL TIPS

DENTI UNIK SYMMETRICAL TIPO ITR®
DIENTES UNIK SYMMETRICAL DE TIPO ITR®
DENTS UNIK SYMMETRICAL TYPE ITR®
UNIK SYMMETRICAL ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1U3202SYLU 156 60 67 60 1,5 8E6208 (STD) 8E6209 (STD) J200

6Y3228 (STD) 8E6259 (STD)

6Y3222SYLU 185 72 85 72 2,7 J225
1324762 (HD) 1495733 (HD)

9J2258 (STD) 8E6259 (STD)

1U3252SYLU 200 78 98 83 4 J250
1324763 (HD) 1495733 (HD)

1073308 (STD) 8E6259 (STD)

1U3302SYLU 235 90 112 97 5,4 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

1U3352SYLU 267 105 117 108 7,7 J350
1140358 (HD) 1140359 (HD)

7T3408 (STD) 8E8409 (STD)

7T3402SYLU 300 120 134 124 11,6 J400
1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

J450
9W8452SYLU 324 130 145 142 15,4 8E0468 (STD-J460) 8E8469 (STD-J460)
J460
1140468 (HD-J460) 1073469 (HD-J460)

6Y8558 (STD) 8E5559 (STD)

9W8552SYLU 369 153 155 165 23.2 J550
1073378 (HD) 1078559 (HD)

6I6608 (STD) 6I6609 (STD)

6I6602SYLU 419 190 190 200 37,5 J600
1139608 (HD) 1139609 (HD)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
RELEASE M.5.B Q 15

ITR® UNIK ROCK CHISEL TIPS

DENTI UNIK ROCK CHISEL TIPO ITR®
DIENTES UNIK ROCK CHISEL DE TIPO ITR®
DENTS UNIK ROCK CHISEL TYPE ITR®
UNIK ROCK CHISEL ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1U3202RCU 165 42 64 59 1,5 8E6208 (STD) 8E6209 (STD) J200

6Y3228 (STD) 8E6259 (STD)

6Y3222RCU 200 50 82 71 2,7 J225
1324762 (HD) 1495733 (HD)

9J2258 (STD) 8E6259 (STD)

1U3252RCU 220 60 93 80 3,5 J250
1324763 (HD) 1495733 (HD)

1073308 (STD) 8E6259 (STD)

1U3302RCU 250 72 105 92 5,5 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

1U3352RCU 275 85 117 108 8,2 J350
1140358 (HD) 1140359 (HD)

7T3408 (STD) 8E8409 (STD)

7T3402RCU 300 100 130 124 11,2 J400
1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

J450
1U3452RCU 328 105 146 142 14 8E0468 (STD-J460) 8E8469 (STD-J460)
J460
1140468 (HD-J460) 1073469 (HD-J460)

6Y8558 (STD) 8E5559 (STD)

1U3552RCU 380 130 155 163 22,5 J550
1073378 (HD) 1078559 (HD)

6I6608 (STD) 6I6609 (STD)

6I6602RCU 440 160 188 194 37,7 J600
1139608 (HD) 1139609 (HD)

4T4708 (STD) 4T4707 (STD)

4T4702RCU 480 166 211 218 51 J700
1134708 (HD) 1134709 (HD)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
Q 16 RELEASE M.5.B

ITR® UNIK ROCK ABRASION TIPS

DENTI UNIK ROCK ABRASION TIPO ITR®
DIENTES UNIK ROCK ABRASION DE TIPO ITR®
DENTS UNIK ROCK ABRASION TYPE ITR®
UNIK ROCK ABRASION ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

6I6608 (STD) 6I6609 (STD)

1359600CEU 460 155 190 194 50 J600
1139608 (HD) 1139609 (HD)

4T4708 (STD) 4T4707 (STD)

1359700CEU 500 172 210 215 68 J700
1134708 (HD) 1134709 (HD)

1359800CEU 505 212 264 264 88 1341808 (HD) 1341809 (HD) J800

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
RELEASE M.5.B Q 17

ITR® UNIK ABRASION PENETRATION TIPS

DENTI UNIK ABRASION PENETRATION TIPO ITR®
DIENTES UNIK ABRASION PENETRATION DE TIPO ITR®
DENTS UNIK ABRASION PENETRATION TYPE ITR®
UNIK ABRASION PENETRATION ZAHNEN TYP ITR®

TIP UNIK Abrasion Penetration

TIP UNIK Abrasion Penetration

TIP UNIK Heavy Duty Abrasion

TIP UNIK Heavy Duty Abrasion

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1U3202PTU 168 46 71 62 1,8 8E6208 (STD) 8E6209 (STD) J200

(Abrasion Penetration)

6Y3222PTU 205 56 88 73 3,3

6Y3228 (STD) 8E6259 (STD)
J225
(Abrasion Penetration) 1324762 (HD) 1495733 (HD)

1U3252PTU 220 64 100 82 4,7

9J2258 (STD) 8E6259 (STD)
J250
(Abrasion Penetration) 1324763 (HD) 1495733 (HD)

1U3302PTU 260 78 114 99 8

1073308 (STD) 8E6259 (STD)
J300
(Abrasion Penetration) 1324766 (HD) 1495733 (HD)

1U3352PTU 291 89 129 114 11,6

9W2678 (STD) 8E6359 (STD)
J350
(Abrasion Penetration) 1140358 (HD) 1140359 (HD)

7T3402PTU 330 104 141 134 16,7

7T3408 (STD) 8E8409 (STD)
J400
(Abrasion Penetration) 1167408 (HD) 1167409 (HD)

6Y2527 (STD-J450) 8E6359 (STD-J450)

9W8452PTU 350 114 152 147 21 8E0468 (STD-J460) 8E8469 (STD-J450)
J450
(Abrasion Penetration) J460
1140468 (HD-J460) 1073469 (HD-J460)

9W8552PTU 385 140 172 172 30,6

6Y8558 (STD) 8E5559 (STD)
J550
(Abrasion Penetration) 1073378 (HD) 1078559 (HD)

6I6602PTU 450 164 209 208 52,7

6I6608 (STD) 6I6609 (STD)
J600
(Abrasion Penetration) 1139608 (HD) 1139609 (HD)

4T4703PTU 490 176 228 223 68,6

4T4708 (STD) 4T4707 (STD)
J700
(Abrasion Penetration) 1134708 (HD) 1134709 (HD)

6I8802PTU 505 212 254 250 93 1341808 (HD) 1341809 (HD) J800
(Abrasion Penetration)

6I8803U 475 256 248 256 111 1341808 (HD) 1341809 (HD) J800
(Heavy Duty Abrasion)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.
Q 18 RELEASE M.5.B

ITR® UNIK LONG for LOADER TIPS

DENTI UNIK LONG for LOADER TIPO ITR®
DIENTES UNIK LONG for LOADER DE TIPO ITR®
DENTS UNIK LONG for LOADER TYPE ITR®
UNIK LONG for LOADER ZAHNEN TYP ITR®

CATERPILLAR®
A B C D
PART No. Kg. CORRESPONDING
SIZE
(mm.)

1U3202LU 161 61 68 60 1,7 8E6208 (STD) 8E6209 (STD) J200

9J2258 (STD) 8E6259 (STD)

1U3252LU 200 78 94 76 3,4 J250
1324763 (HD) 1495733 (HD)

1073308 (STD) 8E6259 (STD)

1U3302LU 230 90 104 90 5,5 J300
1324766 (HD) 1495733 (HD)

9W2678 (STD) 8E6359 (STD)

1U3352LU 254 105 119 106 8,3 J350
1140358 (HD) 1140359 (HD)

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.