Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Equipment Definition: Component Literature

    Uploaded by

    Abbas Akbar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Equipment Definition: Component Literature

    Uploaded by

    Abbas Akbar
    100 views2 pages

    Original Title

    GE_frame_9E_LUBE_OIL_MAIN_PUMP_PRESSURE_RELIEF_VALVE.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views2 pages

    Equipment Definition: Component Literature

    Uploaded by

    Abbas Akbar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GE Energy

    Rev.: B
    Page: 1/2
    OPERATION AND MAINTENANCE MANUAL
    COMPONENT LITERATURE

    EQUIPMENT DEFINITION

    GE DEVICE : VR1

    DESIGNATION : MAIN LUBE OIL PUMP PRESSURE RELIEF


    VALVE

    SUPPLIER : OC.KECKLEY. CO

    TYPE : 135

    LITERATURE REFERENCE : BUL. KECKLEY (1 PAGE)

    All right reserved copyright


    OMML_0416_25_VR1_B_EN Revision: B Date: 12/2013
    0. C. KECKLEY COMPANY
    3400 CLEVELAND STREET . SKOKIE, ILLINOIS 60076
    TELEPHONE CODE 312) 4-8422

    INSTRUCTION SHEET
    No. 135 back pressure valves

    APPLICATION: Steam. air, oil, water or


    any other fluids not inqurious to the
    materials. Tight-closing.

    INSTALLATION: Clean dirt, etc. from


    valve and pipe. Install valve in a
    horizontal line with spring chamber above
    the line. Flow through the valve should
    agree with markings on the valve. If the
    valve is two or more sizes smaller than the
    pipe install it in the bypass line to reduce
    strains on the valve. Trap condensate
    ahead of valve inlet. Cup Disc,
    Bushing

    STARTING: Open outlet valve fully:


    open inlet valve gradually adjusting NO. 135 2 INCH AND LARGER
    the back pressure by changing the spring
    compression. 1) Body 6) Upper Spring

    TROUBLES AND REMEDIES: To stop Cup Disc 10) Adjusting Screw


    any pulsating or hunting check to make Ball 11) Spring Chamber
    5) Lower Spring Plate 12) Adjustment Screw
    sure the inlet shutoff valve is wide open.
    6) Spring Chamber 13) Stem Head
    Dismantle and clean thoroughly the
    Valve Stem 14) Sleeve
    valve including the equalizing port. If the
    cup disc and seat bushing are scored,
    dress lightly with powered emery and oil. DIMENSIONS
    Failure to close is usually caused dirt.
    etc. on seat: try cleaning seat by opening T to F-Inches T to Maxim.
    Inlet
    valve with pressure allowing the media to Standard Ex. Hvy.
    in.
    pass through the valve. If needed,
    dismantle the valve and clean. To - - 300
    dismantle valve detach the spring 300
    chamber from the valve body and remove 250
    entire assembly. The adjusting spring 200
    c o u l d b e c o m p r e s s e d in t h e s p r i n g 1 4% 180

    chamber and access to this part should be 150

    handled cautiously. 3 5% 140


    4 --. 125

    MAINTENANCE: Operation and condi- 5 . 7% 100

    tion of the valve should be checked 6 90


    regularly. ...... 9 % 80

    You might also like