Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 381 views

    Solution: Problem Set No. Title: Strain Page No.

    Uploaded by

    Noven Villaber
    This document contains 10 problems related to calculating stress, strain, elongation, and other mechanical properties for various materials including steel, aluminum, nylon, and brass when subjected to tensile loads. For each problem, the relevant material properties and loading conditions are provided, and the student is asked to calculate unknown values such as maximum load, elongation, stress, diameter, or length.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Solution: Problem Set No. Title: Strain Page No.

    Uploaded by

    Noven Villaber
    381 views5 pages
    This document contains 10 problems related to calculating stress, strain, elongation, and other mechanical properties for various materials including steel, aluminum, nylon, and brass when subjected to tensile loads. For each problem, the relevant material properties and loading conditions are provided, and the student is asked to calculate unknown values such as maximum load, elongation, stress, diameter, or length.

    Original Description:

    fundamental of deformable body

    Original Title

    strain answer

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 10 problems related to calculating stress, strain, elongation, and other mechanical properties for various materials including steel, aluminum, nylon, and brass when subjected to tensile loads. For each problem, the relevant material properties and loading conditions are provided, and the student is asked to calculate unknown values such as maximum load, elongation, stress, diameter, or length.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    381 views5 pages

    Solution: Problem Set No. Title: Strain Page No.

    Uploaded by

    Noven Villaber
    This document contains 10 problems related to calculating stress, strain, elongation, and other mechanical properties for various materials including steel, aluminum, nylon, and brass when subjected to tensile loads. For each problem, the relevant material properties and loading conditions are provided, and the student is asked to calculate unknown values such as maximum load, elongation, stress, diameter, or length.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    Problem Set No. Title: Strain Page No.

    1. An 80-m-long wire of 5-mm diameter is made of a steel with E = 200 GPa and an
    ultimate tensile strength of 400 MPa. If a factor of safety of 3.2 is desired, determine
    (a) the largest allowable tension in the wire, (b) the corresponding elongation of the
    wire.

    Solution

    2. A steel control rod is 5.5 ft long and must not stretch more than 0.04 in. when a 2-
    kip tensile load is applied to it. Knowing that E = 29×106 psi, determine (a) the
    smallest diameter rod that should be used, (b) the corresponding normal stress
    caused by the load.

    Solution

    University of Science and Technology Name : Noven S. Villaber


    Of Southern Philippines Rating:
    College of Engineering and Architecture Instructor : Engr. Dianne Mae M. Asenero
    Lapasan, Cagayan de Oro City
    9000 Philippines
    Date : March 2020 _________
    Problem Set No. Title: Strain Page No.:

    3. 2 -in.-diameter aluminum rod with E = 10.1×106 psi and an ultimate strength of 16 ksi.
    Knowing that the distance between the gage marks is 10.009 in. after a load is applied,
    determine (a) the stress in the rod, (b) the factor of safety.

    Solution

    4. An 18-m-long steel wire of 5-mm diameter is to be used in the manufacture of a


    prestressed concrete beam. It is observed that the wire stretches 45 mm when a tensile
    force P is applied. Knowing that E = 200 GPa determine (a) the magnitude of the force P,
    (b) the corresponding normal stress in the wire.

    Solution

    University of Science and Technology Name : Noven S. Villaber


    Of Southern Philippines Rating:
    College of Engineering and Architecture Instructor : Engr. Dianne Mae M. Asenero
    Lapasan, Cagayan de Oro City
    9000 Philippines
    Date : March 2020 _________
    Problem Set No. Title: Strain Page No.:

    5. A polystyrene rod of length 12 in. and diameter 0.5 in. is subjected to an 800-lb tensile
    load. Knowing that E = 0.45×106 psi, determine (a) the elongation of the rod, (b) the
    normal stress in the rod.

    Solution

    6. A nylon thread is subjected to a 8.5-N tension force. Knowing that E = 3.3 GPa and that
    the length of the thread increases by 1.1%, determine (a) the diameter of the thread, (b)
    the stress in the thread.

    Solution

    University of Science and Technology Name : Noven S. Villaber


    Of Southern Philippines Rating:
    College of Engineering and Architecture Instructor : Engr. Dianne Mae M. Asenero
    Lapasan, Cagayan de Oro City
    9000 Philippines
    Date : March 2020 _________
    Problem Set No. Title: Strain Page No.:

    7. Two gage marks are placed exactly 250 mm apart on a 12-mm-diameter aluminum rod.
    Knowing that, with an axial load of 6000 N acting on the rod, the distance between the
    gage marks is 250.18 mm, determine the modulus of elasticity of the aluminum used in
    the rod.

    Solution

    8. An aluminum pipe must not stretch more than 0.05 in. when it is subjected to a tensile
    load. Knowing that E = 10.1 x 106 psi and that the maximum allowable normal stress is
    14 ksi, determine (a) the maximum allowable length of the pipe, (b) the required area of
    the pipe if the tensile load is 127.5 kips.

    Solution

    University of Science and Technology Name : Noven S. Villaber


    Of Southern Philippines Rating:
    College of Engineering and Architecture Instructor : Engr. Dianne Mae M. Asenero
    Lapasan, Cagayan de Oro City
    9000 Philippines
    Date : March 2020 _________
    Problem Set No. Title: Strain Page No.:

    9. An aluminum control rod must stretch 0.08 in. when a 500-lb tensile load is applied to it.
    Knowing thatσall 22 ksi and E 10.1106 psi, determine the smallest diameter and
    shortest length that can be selected for the rod.

    Solution

    10. A square yellow-brass bar must not stretch more than 2.5 mm when it is subjected to a
    tensile load. Knowing that E = 105 GPa and that the allowable tensile strength is 180
    MPa, determine the maximum allowable length of the bar.

    Solution

    University of Science and Technology Name : Noven S. Villaber


    Of Southern Philippines Rating:
    College of Engineering and Architecture Instructor : Engr. Dianne Mae M. Asenero
    Lapasan, Cagayan de Oro City
    9000 Philippines
    Date : March 2020 _________

    You might also like