Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 59 views

    Power Electronics Lab: Objectives

    Uploaded by

    Rafey
    This document describes experiments performed on an AC static converter circuit with resistive and resistive-inductive loads. The objectives are to study the converter circuit with a resistive load (R) and a resistive-inductive load (RL). Measurements are taken of voltage and current outputs at various control angles, and control characteristics are drawn comparing theoretical predictions to experimental results.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Power Electronics Lab: Objectives

    Uploaded by

    Rafey
    59 views8 pages
    This document describes experiments performed on an AC static converter circuit with resistive and resistive-inductive loads. The objectives are to study the converter circuit with a resistive load (R) and a resistive-inductive load (RL). Measurements are taken of voltage and current outputs at various control angles, and control characteristics are drawn comparing theoretical predictions to experimental results.

    Original Title

    lab3

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes experiments performed on an AC static converter circuit with resistive and resistive-inductive loads. The objectives are to study the converter circuit with a resistive load (R) and a resistive-inductive load (RL). Measurements are taken of voltage and current outputs at various control angles, and control characteristics are drawn comparing theoretical predictions to experimental results.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    59 views8 pages

    Power Electronics Lab: Objectives

    Uploaded by

    Rafey
    This document describes experiments performed on an AC static converter circuit with resistive and resistive-inductive loads. The objectives are to study the converter circuit with a resistive load (R) and a resistive-inductive load (RL). Measurements are taken of voltage and current outputs at various control angles, and control characteristics are drawn comparing theoretical predictions to experimental results.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 8

    Power Electronics Lab Lab 3

    IMPLEMNTATION OF AC STATIC CONVERTER WITH RESISTIVE & RESISTIVE-


    INDUCTIVE LOADS

    Objectives

    To carry out the experiments “AC Static converter with ohmic load (R)”.

    To carry out the experiments “AC Static converter circuit with ohmic - inductive load (RL)”.

    List of Equipment/Software

    Following software/equipment is required:

     Supply voltage: 45 V
     Ohmic - inductive load: 33 Ω (3 x 100 Ω resistances in parallel)
     Ohmic- inductive load: 33 Ω (3 x 100 Ω resistances in parallel) and 50 mH (1 inductance in
    series)
     Pulse form: “Pulse”
     Bridge topology: “735 012 – 11 W1C”
     CASSY Software

    Circuit Diagram
    Power Electronics Lab Lab 3

    Connection Diagram

    Experimental Procedure
    Power Electronics Lab Lab 3

    In Lab Exercise No. 01

    The time profiles should be drawn for the angles 90° and 135°and described briefly. To obtain the line
    diagrams below, please connect the components as per connection diagram. Open the CASSY Lab file
    W1C_R_90.labx.
    Measurement of us01, uV1, ud, id
    us01: Line voltage
    ud : DC voltage
    id : DC current
    uV : valve voltage

    Task 1.1
    Measurement of us01, uV1, ud, id at α = 90°

    Results/Graphs
    Power Electronics Lab Lab 3
    Task 1.2
    Measurement of us01, uV1, ud, id at 135°
    Open the CASSY Lab file W1C_R_135.labx.

    Results/Graphs
    Power Electronics Lab Lab 3

    In Lab Exercise No. 02

    Transfer characteristic of AC Static converter circuit with ohmic load

    Measure how the root-mean-square value I α is dependent on the control angle in the range from 0° …
    150°. The measurements should be taken in 30° steps. Calculate the quotients of the current and draw the
    control characteristic of the DC current f(α) = Id(α) / Id(α=0).

    Id(α) : DC current (averaged value) depending on angle.

    Evaluated Results

    α/° 0 30° 60° 90° 120° 150°


    °
    Id(α)/V
    Id(α) / Id(α=0)
    Power Electronics Lab Lab 3

    In Lab Exercise No. 03

    Compare the controls characteristics determined for the ideal case (Theory) and for the measured values
    as drawn in the fig. above.

    Theoretical results

    Id(α) / Id(α=0) = √ (1/π * (π - α + sin 2α ) / 2)

    Id(α) / Id(α=0) ----- ----- ----- ----- ---- ---

    Analysis/Discussion

    In Lab Exercise No. 04

    The time profiles of which have been drawn for the angles 45° and 135° are to be described briefly. To
    obtain the line diagrams below, please connect the components as shown in connection diagram. Open the
    CASSY lab file W1C_RL_45.labx.
    Measurement of us01, ud, uv1, id.
    us01 : line voltage
    ud : DC voltage
    id : DC current
    uV1 : Valve voltage
    Power Electronics Lab Lab 3

    Task 4.1
    Measurement of us01, ud, uv1, id.at α = 45°
    Result/Graph

    Task 4.2
    Measurement of us01, ud, uv1, id.at α = 135°

    Open the CASSY lab file W1C_RL_135.labx.

    Result/Graph
    Power Electronics Lab Lab 3

    Analysis/Discussion

    You might also like