Vacuum Oven

VAC･LCV

CAT.NO.E04196-Y711
 Vacuum ovens and vacuum driers
that serve a wide array of uses

ESPEC vacuum ovens are

designed for easy operation on production lines.
They provide a variety of features such as five application-specific operation modes.
Program Mode can remember up to nine operation steps.
Direct-heated vacuum driers speedily perform tasks that use nitrogen
such as anaerobic baking, defoaming, hardening and deaerating.

VAC−100PR VAC−200PR

１ *Pirani vacuum gauge, paperless recorder, expert mode and integrating hour meter are optional.
VAC−300PR LCV−233P

２
 Utility
Vacuum Oven VAC

Excellent temperature uniformity and ease of operation

Double-layered
interior construction for
great temperature uniformity
The vacuum chamber features double-
layered construction. A heater on the
exterior of the inner chamber minimizes
heat loss and improves temperature
uniformity. This allows even more
uniform heat treatment and improves
machine efficiency by reducing heat up
time.

Design emphasizing ease of use

More than 110 mm of space is provided
Inside chamber (The hermetic terminals are optional.) between floor and bottom of the unit
allow for easy loading and unloading of
specimens using a hand lift. The design
●
 
  
 
 also includes ease-of-use features, such
  

 

as door handles with a recoil-free
locking mechanism for smooth opening

  !" and closing.
 #$ %& ＋ '
 
 %%$  # (#)$$

* #$ ＋ ' Suitable for a wide range of usages
*Temperature uniformity for interior The ovens are ideal for a range of
center (point 5) and eight interior
applications, such as electronic

points with no specimen.

component production, including

 defoaming when mixing silicone rubber


       
 or resins in LED production, deaerating
 ＋

 ＋

＋
  ＋
  ＋
  ＋
 ＋
  ＋
  ＋
  ± during resin forming, hardening when
（℃） injecting epoxy for hybrid ICs, and
4 #%$ %$% #*
( # %+
. #% # 0#
drying electronic components after
washing.

Torr-Pa selection function

The Torr-Pa selection function is
standard; however, the display panel can
be switched to Torr units with the touch
of a button.

Viewing window for full view

of specimen (Optional)
The viewing window is curved very
Pa readout Torr readout
slightly to eliminate exterior reflections.

３
 Control operation
Vacuum Oven VAC

Vacuum control modes to suit a wide range of applications

Five operation modes to be ● Five operation modes
chosen Main
Program and Typical pattern Details applications
The ovens feature a selection of five
operating modes, including constant
 
（×,）
・   

℃
operation, allowing timer-controlled ＋,, ,.
start and stop (on/off); program modes,
 
  
allowing programmed operation of up to ＋-,   /-,    

nine steps; gas exchange mode; vacuum ＋,, -,, ・  !

 
gradient control mode; and expert mode, ＋-,   -,   "
#
"
 

$ 
allowing repeated high-volume processing
of identical specimens. The expert mode ,
can be selected as an option. Users can 

select an operation that suits a particular ℃ （×,） ・ %
  
application from the five operating ＋,,   ,.   

modes.    $  
＋-, /-,   
  

＋,, -,, ・     
Expert Mode demonstrates ＋-,   -,    
its capabilities in repeated 
 $ 


high-volume processing ,       &
 
'
(Optional)
A jog dial is provided for fine control of   ・  
（×,）
the depressurization rate. ＋,,
℃
,.
 
 
      
 
The depressurization schedule used is
＋-, /-,  
 $
stored and can be called up for   

 ( 
%    
＋,, -,,  
subsequent operations to ensure accurate ・    
processing. Expert Mode eliminates the ＋-, -,  $ 

fussing with valve controls for each  


,       
    
  )
process, and is ideally suited for
repeated high-volume processing of
identical specimens.

    

 ・  
℃
 
（×,）   
＋,, ,.     
＋-,
  /-,  $ 

  


  
 


  

  &
 
' 
＋,, -,, 

 
・   $
+

 
  
  
 ＋-, -, 





  

 
  
 

 ,         .  
  )


 
  
＋℃
#
 

 
  
 ×    &0
' ・  *
   $

  ! 
 
 " !  


(  
 (
℃ （×, ）

  

#
  

 
 ℃ ＋,, ,.  +


 
 
 ×  ＋-, /-, ・   +



 
 
   
  
   $  

＋,, -,,  
    


 
 %&'(# &   
$ 
 ＋-, -, 
 $ 

 '
  ・    
(
  
*
 
!   $ 
 

 
  ,       

   
  )

!  
 






 
) $ 
 +

 





 

 $ 



 
( 

,

 
-

 
$ 
 
    
 
,


 

４
 SPECIFICATIONS

Model VAC-100PR VAC-200PR VAC-300PR

  φ     !φ ! 

 
   φ   !  φ     !φ ! 
"  φ  
 
 

 #$% !#% #$%
 


 &



。
'(  ＋ 
＋!℃ )＋" 
＋* &+
。
, 

( ＋" 
＋℃ )＋" 
＋!* &+
, - 
 ±#℃ ).+ ±℃ )
/+
, /2   /  # / $ # / ? #
 

( *!! 
 0× 1


  ! 3
 !! 
&
 
/  
!! 
  24
  ! / $ # /  # / ! #
; 
 

/
 
.
 / " # / ? # /  #
6
  6 4 
42
4   
 /8 9     )9:9!"+




;
  9     )<99"! !+

; 
 =  


  /
;  > " / #
(  #  )# %(=+
'  ?   4# 88 /
 




   φ     !φ  
' 

@( / 4 7# )+ "7# )+
.
   #$×− 
 
-
 = 8  . .
  
&( 45 - 4  )- 
.(+ )×" /+
6--. 4 
)7+ *  
6--. 4 4
 "×"×@"  ××@  ?×?×@? 
)?#×?#×@?# /+ )"#×"#×@"# /+ )!#×!#×@!# /+
'4 4
 " ?$×"×@  ××@?  ×?×@ 
)!"#?×?#×@# /+ )"#?×"#×@!# /+ )"?#?×$#×@"# /+
(/ )%(+ ! )!? -
  ! "+ " )"? -
  ! "+ 
 
( - 
 / ±A
- 4 .
(#
 , 
 8   / 
- /8 / 
 4 . / 8 
- B!C 4  (
- BC#
! 
  4 /8 / 
( (
 -
 #
" 6 4( 

#

SAFETY DEVICES ACCESSORIES

● Leakage breaker ● Shelves (Stainless steel punched trays) 2
● Overheat protector VAC-100 PR: W435×H13.5×D435 (mm)
● Thermal fuse Maximum load: 30kg per shelf (evenlly-distributed load)
● Thermal relay VAC-200 PR: W585×H13.5×D585 (mm)
Maximum load: 30kg per shelf (evenlly-distributed load)
VAC-300 PR: W785×H13.5×D785 (mm)
Maximum load: 20kg per shelf (evenlly-distributed load)
* Two shelves are included as standard, and up to five can be fitted.
Total specimen weight must not exceed 100kg.
● Eyebolt hole cover 4
● Cartridge fuse (2.0A) 1
● User's manual 1
５
 OPTIONS (VAC)

Expert Mode Hermetic terminals for voltage application Paperless recorder

The jog dial can be used to precisely Used when applying to specimens Records temperature and pressure
control, record, and reproduce voltage. inside the chamber. Additional inputs
depressurization. ・Specifications: Hermetic terminal may also be recorded.
(four-core) Temperature range: ＋20 to ＋220℃
・Max. current: 6 A Pressure range: 0 to 106.8kPa
・Max. voltage: 200V AC, 250V DC Number of inputs (Initial setting):
・Mounted location: Oven rear Temperature 1
* Up to four hermetic connectors can be connected to Presure 1
terminals for voltage application and thermo- (4 more channels can be turned ON)
couples. Data saving cycle: 5 sec
External recording media:
CF memory card (32MB)
Hermetic terminals for thermocouples Language Support: ENG, JPN
* The Pirani vacuum gauge cannot be fitted to the
Used for connecting to thermocouples VAC-100PR if the paperless recorder is installed.
from specimens or interior chamber.
Specifications: Hermetic terminal
(eight-core, four pairs)
Mounted location: Oven rear
* Up to four hermetic connectors can be connected to
terminals for thermo-couples and voltage
application.

Pirani vacuum gauge

Pressure is displayed digitally, while

this gauge is used to measure pressure
accurately below 2,700 Pa.
・Measuring range: 0.4 to 2,700 Pa
・Measuring accuracy: within ±3% Temperature and pressure recorder
of full-scale 100% equivalent on
linear scale for voltage application for thermocouples
Records the interior oven temperature
* The temperature and pressure recorder or the
paperless recorder cannot be fitted to the VAC-
and pressure.
100PR if the Pirani vacuum gauge is installed. ・Temperature range: ＋20 to ＋220℃
Terminal for recorder ・Pressure range: 0 to 106.7 kPa
・Inputs: Temperature (×1),
Output interior temperature and Pressure (×1)
pressure via 1 to 5V DC linear output. ・Recording method: Intermittent
Temperature: ＋20℃ to ＋220℃, 1V recording
to 5V * The Pirani vacuum gauge cannot be fitted to the
・Pressure: 0 to 106.7 kPa, 1V to 5V VAC-100PR if the temperature and pressure
recorder is installed.
・Mounted location: Oven rear
(above inlet)

           

      !  !  "!   #

 !    

!  $   %#       




    
６
 OPTIONS (VAC)

External alarm terminal Inlet filter E-BUS cable

If the safety device of the chamber Filters the air drawn into the ・5, 10m
activates, an error is notified to a depressurized interior.
distance via the external alarm ・Pore size: 0.2 µm
terminal. ・Max. pressure: 411.9 kPa Power cord
・Power capacity: 250V AC, 3A (4.2 kg/cm2)
・Operation: Connection output when ・Connector: NPT 1/8, male screw Length from oven: 5 and 10m
error occurs (closed) ・Mounting location: Inlet (two extra cords provided)
・Mounted location: Oven rear * The standard cord provided is 2.5 m from the oven.

(above inlet)
Cold trap

Signal tower Cools and removes moisture and

organic solvents contained in the outlet
Illuminates to indicate errors when the air before being drawn into the vacuum
safety device activates. pump.
・Color: Red (Separate from oven)
・Mounting location: Top panel ・Outside dimensions:
W306×H700×D355mm

Viewing window
Vacuum pump outlet port
Equipped with a slightly curved viewing
Vents gas from the vacuum pump
window made of hardened glass.
externally.
・W324×H336mm
・Outside connector: NW25
(ISO standard)
・Connection: Quick coupling
Center ring with O-ring (not provided)
・Mounting location: Shelf rear

Vacuum pump oil (one-liter can)

Used when maintaining the vacuum

pump.

Integrating hour meter Shelves

Indicates the total integrated operating Stainless steel punched trays

time. * Up to five can be fitted inside the oven.
This is used as a guide for time
recording during continuous operation,
as well as for maintenance and inspec-
tion timing.
・Mounting location: Bottom of opera-
ting panel

■Some photographs listed in this catalog contain Japanese display.

７
LCV
Vacuum Oven LCV

LCV−233P

Direct heating system for

fast vacuum-dry
In addition to th e g as ex ch an g e
function, it can treat specimens in
oxygen-free atmospheres using nitrogen
or other gases, and supports baking,
degassing, hardening, deaeration and
numerous other applications.
●  

 
 !" #$
Easy operation

   （℃）

Temperature setting and upper/lower

 *
−
temperature limit alarm setting can be 
 

 *
−
done with simple key operation.
 
 
%&  #'(


 φ 
 
  ( ＋℃
 )  

     
（
）

+ ,
 # -  &
 
" #

８
 SPECIFICATIONS

 

 

     

     &()*++ ,  

  
 φ 
7  5 %
- ! .,＋/℃  ＋℃ .±%。0/
4   #1

 !   −112 .3!/

- ±1'℃ .±1'5。
0/
4  
- ,   ＋℃ .＋%。0/
*  6 ' 11 '
(7  "  . !/
   

  15*5 *>    .?  /

! "  -" !
  !! ? "  , :  !!
   
 
%& 1&
" "  # 89×H9×D9  8×H×D 
.816'6×H16'6×D16'6  / .81'6×H1'6×D1'6  /
$" "  # 86×H5%×D6  866×H%%×D5 
.8'9×H'×D6'  / .8'×H%'×D1'  /
8! 162! 2!
#1 0! 4   ,  4 ＋℃       ,' - 4     "!  <- ) * 4 < -!  
  '
# (7 "!   
■   
 4  4  : !  "4    :,   ='

      

 
 
           
 !

 

  

     " − ! :  
4   # '6×1*  .,/  ! , ::  "
'6 .,/  ! , :: 
  
 φ 
 ! " #  %& '
$" "  # 86×H19×D6  866×H19×D5 
.8'9×H'×D6'  / .8'×H9'×D1'  /
8! 92! 2!
# ":" 4    4 :  '

'(  )*)% $+,$%') +')()

 
 
  !  @    

"    # %   1  .>, 4  A 1  %%/
"  - A   ＋1℃
 
  " - A   %%  %'@ 1  %%% 
"  - A 1℃
 
 

 - A 1'
$ -  
 )
.> 2*  > 2*/


   
 ,*  "   4  
+ "   '   4  
%& # 4*"!  4   .8 " ! /

  "   4  
  4     4  
- 4   .    /
９
 SAFETY DEVICES OPTIONS (LCV)
●
Leakage breaker for power supply Hermetic terminal Chamber stand
●
Thermal fuse
●
Watchdog timer The terminals are used to apply voltage The stand is equipped with casters
●
Overheat protector to specimen inside chamber and to enabling chamber to move.
(independent type) measure in-chamber temperatures. * LCV-233, 243 models only.
* Standard equippment in LCV-233P, 243P models.
●
Upper and lower temperature ・for thermocouple 8P(×4 pairs)
limit alarms ・for voltage impression 4P
●
Sensor burn-out detection circuit Communication function
Reverse flow prevention valve
Connects chamber to a PC, enabling
The valve prevents lubricating oil operation control of the chamber.
ACCESSORIES inside vacuum pump from reverse flow ・RS-485
when chamber is vacuum state. ・GPIB
●
Shel/ Shelf bracket * LCV-233P, 243P models only. ・RS-232C
(Stainless steel plate) 5 sets ・E-BUS
●
User's manual 1 set
Shelf, Shelf bracket
Communication cable
Standard specification shelves and
shelf brackets are added as required. ・RS-485 cable （5, 10 m）
・GPIB cable （2, 4 m）
・RS-232C cable（1.5, 3, 5 m）
・E-BUS cable （5, 10 m）

●             

      !  !  "!   #

 !    
●          
   &!  !       #  %  #
 ! #        
  !   
●          !  

% 



'   !       
１０
 http://www.espec.co.jp/english
Head Office
3-5-6, Tenjinbashi, Kita-ku, Osaka 530-8550, Japan
Tel : 81-6-6358-4741 Fax : 81-6-6358-5500

ESPEC NORTH AMERICA, INC.

Tel : 1-616-896-6100 Fax : 1-616-896-6150
ESPEC EUROPE GmbH
Tel : 49-89-1893-9630 Fax : 49-89-1893-96379
ESPEC ENVIRONMENTAL EQUIPMENT (SHANGHAI) CO., LTD.
Head Office
Tel : 86-21-51036677 Fax : 86-21-63372237
BEIJING Branch
Tel : 86-10-64627025 Fax : 86-10-64627036
TIANJIN Branch
Tel : 86-22-26210366 Fax : 86-22-26282186
GUANGZHOU Branch
Tel : 86-20-83317826 Fax : 86-20-83317825
SHENZHEN Branch
Tel : 86-755-83674422 Fax : 86-755-83674228
SUZHOU Branch
Tel : 86-512-68028890 Fax : 86-512-68028860
ESPEC TEST TECHNOLOGY (SHANGHAI) CO., LTD.
Tel : 86-21-68798008 Fax : 86-21-68798088
ESPEC (MALAYSIA) SDN. BHD.
Tel : 60-3-8945-1377 Fax : 60-3-8945-1287

ESPEC CORP.
ESPEC CORP. has been assessed by and
registered in the Quality Management System
based on the International Standard ISO
9001:2008 (JIS Q 9001:2008) through the
Japanese Standards Association (JSA).

● Specifications are subject to change without notice due to design improvements.

NO11B19C03 (The contents of this catalog is as of November, 2007.) ● Corporate names and trade names mentioned in this catalog are trademarks or registered trademarks.