HBW-200 T5 INDUSTRIAL RANGE

Powered by BAUDOUIN

SERVICE PRP ESP

POWER kVA 200 220

POWER kW 160 176

RATED SPEED r.p.m. 1.500

STANDARD VOLTAGE V 400/230

AVAILABLE VOLTAGES V 230/132 · 230 V (t)

RATED AT POWER Cos Phi 0,8

FACTOR

INDUSTRIAL RANGE STANDARD SOUNDPROOFING

HIMOINSA Company with quality certification ISO 9001
HIMOINSA gensets are compliant with EC mark which includes the following
directives: F1
• 2006/42/CE Machinery safety.
• 2014/30/UE Electromagnetic compatibility.
• 2014/35/UE electrical equipment designed for use within certain voltage limits
• 2000/14/EC Sound Power level. Noise emissions outdoor equipment. (amended by
2005/88/EC) WATER-COOLED
• EN 12100, EN 13857, EN 60204

Ambient conditions of reference according to ISO 8528-1:2018 normative: 1000 mbar,

25ºC, 30% relative humidity.

Prime Power (PRP):

THREE PHASE
According to ISO 8528-1:2018, Prime power is the maximum power which a
generating set is capable of delivering continuously whilst supplying a variable
electrical load when operated for an unlimited number of hours per year under the
agreed operating conditions with the maintenance intervals and procedures being
carried out as prescribed by the manufacturer. The permissible average power output 50 HZ
(Ppp) over 24 h of operation shall not exceed 70 % of the PRP.

Emergency Standby Power (ESP):

According to ISO 8528-1:2018, Emergency standby power is the maximum power
available during a variable electrical power sequence, under the stated operating NON COMPLYING 97/68/EC
conditions, for which a generating set is capable of delivering in the event of a utility
power outage or under test conditions for up to 200 h of operation per year with the
maintenance intervals and procedures being carried out as prescribed by the
manufacturers. The permissible average power output over 24 h of operation shall not
exceed 70 % of the ESP
DIESEL
Continuous Power (COP): According to Standard ISO 8528-1:2018, this is the
maximum power available for continuous loads for unlimited running hours a year
between the maintenance times recommended by the manufacturer under the
environmental conditions established by the same.

G2 class load acceptance in accordance with ISO 8528-5:2013 Himoinsa has the right to modify any feature without prior notice.
HIMOINSA HEADQUARTERS: Weights and dimensions based on standard products. Illustrations may
Fábrica: Ctra. Murcia - San Javier, Km. 23,6 | 30730 SAN JAVIER (Murcia) Spain include optional equipment.
Tel.+34 968 19 11 28 Fax +34 968 19 12 17 Fax +34 968 19 04 20 |
info@himoinsa.com | www.himoinsa.com Technical data described in this catalogue correspond to the available
information at the moment of printing.
Manufacture facilities:
SPAIN • FRANCE • INDIA • CHINA • USA • BRAZIL • ARGENTINA The illustrations and images are indicative and may not coincide in their
Subsidiaries: entirety with the product.
PORTUGAL | POLAND | GERMANY | UK | SINGAPORE | UAE | PANAMA |
DOMINICAN REPUBLIC | ARGENTINA | ANGOLA | SOUTH AFRICA Industrial design under patent.
2020-MAY.-04 18:46

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
 HBW-200 T5

Engine Specifications | 1.500 r.p.m.

Rated Output (PRP) kW 176 Fuel Consumption ESP l/h 46,9

Rated Output (ESP) kW 193 Fuel Consumption 100% l/h 43,1
PRP
Manufacturer BAUDOUIN
Fuel Consumption 75 % PRP l/h 32,4
Model 6M16G220.5
Fuel Consumption 50 % PRP l/h 22,4
Engine Type 4-stroke diesel
Fuel Consumption 25 % PRP l/h 12,5
Injection Type Direct
Lube oil consumption with 0,2 % of fuel
Turbocharged and full load consumption
Aspiration Type after-cooled
Total oil capacity including
Number of cylinders and L 30
6-L tubes, filters
arrangement
Total coolant capacity L 44
Bore and Stroke mm 126 x 130
Governor Type Electrical
Displacement L 9,726
Air Filter Type Dry
Liquid (water +
Cooling System 50% glycol) Inner diameter exhaust pipe mm 100
API CF4, SAE
Lube Oil Specifications 15W40
Compression Ratio 17:1

• Diesel engine • Dry air filter • Hot parts protection

• 4-stroke cycle • Radiator with pusher fan • Moving parts protection
• Water-cooled • HTW sender • Radiator water level sensor (Opcional).
• 24V electrical system • LOP sender
• Water separator filter (no visible • Electronic governor
level)

Generator Specifications | MECC ALTE

Manufacturer MECC ALTE Enclosure (according IP23

IEC-34-5)
Model ECO38 2S/4 A
Self-excited,
Poles No. 4 Exciter system brushless
Connection type (standard) Star-series Voltage regulator A.V.R. (Electronic)
Mounting type S-1 14" Bracket type Single bearing
Insulation Class H class Coupling system Flexible disc
Standard (Vacuum
Coating type impregnation)

• Self-excited and self-regulated

• 4 poles
• AVR governor
• IP23 protection
• H class insulation
2020-MAY.-04 18:46

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
 HBW-200 T5

WEIGHT AND DIMENSIONS

High Capacity
Standard Version version
Length (L) mm 3.800 3.800
Height (H) mm 2.253 2.615
Width (W) mm 1.400 1.400
Maximum shipping volume m³ 11,99 13,91
Weight with liquids in radiator Kg 3412 3914
and sump
Fuel tank capacity L 449 999
Autonomy Hours 14 31
Sound pressure level dB(A)@7m 68 ± 2,4 68 ± 2,4
Steel tank Steel tank

APPLICATION DATA
EXHAUST SYSTEM NECESSARY AMOUNT OF AIR

Maximum exhaust temperature ºC 600 Intake air flow m³/h 852

Exhaust Gas Flow m³/min 38,2 Cooling Air Flow m³/s 6,92

Maximum allowed back pressure mbar 60 Alternator fan air flow m³/s 0,533

Exhaust Flange Size (external mm 140

diameter)

STARTING SYSTEM FUEL SYSTEM

Starting power kW 8,5 Fuel Oil Specifications Diesel

Starting power CV 11,56 Maximum power suction pump mm Hg 375

Recommended battery Ah 44 x 2 Maximum return feed pump mm Hg 375

Auxiliary Voltage Vdc 24 Fuel Tank L 449

Other fuel tank capacities L 999

Soundproofed version

• Steel chassis • Low noise emissions level • Chassis ready for future mobile kit
installation
• Anti-vibration shock absorbers • Soundproofing provided by
high-density volcanic rock wool • Oil sump extraction kit
• Chassis with integrated fuel tank
• Epoxy polyester powder coating • Versatility to assemble a high capacity
• Fuel level gauge chassis with a metallic fuel tank
• Full access for maintenance (water, oil
• External emergency stop switch and filters, no need to remove the • IP Protection according to ISO
canopy) 8528-13:2016
• Bodywork made from high quality
steel plate • Reinforced lifting hooks for crane • 3 way valve for external fuel supply
hoisting (available in 1/2" and 3/8" fittings) (Opcional).
• High mechanical strength
• Watertight chassis (acts as a double • Fuel transfer pump (Opcional).
barrier against liquid retention) • Steel residential silencer -35db(A)
attenuation. (Opcional).
• Fuel tank drain plug
2020-MAY.-04 18:46

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
 HBW-200 T5

FEATURES OF THE
CONTROL UNITS
CEM 7 CEA 7 CEC 7 CEM7 + CEC7
Voltage between phases • • • •
Voltage between neutral and phase • • • •
Current intensities • • • •
Generator Readings

Frequency • • • •
Apparent power (Kva) • • • •
Active power (Kw) • • • •
Reactive power (kVAr) • • • •
Power factor • • • •
Voltage between phases • • •
Voltage between phases and neutral • • •
Current intensities • • •
Frequency • • •
Mains Readings

Apparent power •
Active power •
Reactive power •
Power factor •
Coolant temperature • • •
Oil pressure • • •
Engine Readings

Fuel level (%) • • •

Battery voltage • • •
R.P.M. • • •
Battery charge alternator voltage • • •
High water temperature • • •
High water temperature by sensor • • •
Low water temperature by sensor • • •
Low oil pressure • • •
Low oil pressure by sensor • • •
Low water level • • •
Unexpected shutdown • • •
Fuel storage • • •
Fuel storage by sensor • • •
Stop failure • • •
Battery voltage failure • • •
Engine Protections

Battery charge alternator failure • • •

Overspeed • • •
Underspeed • • •
Start failure • • •
Emergency stop • • • •
• Standard Optional
2020-MAY.-04 18:46

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
 HBW-200 T5

CEM 7 CEA 7 CEC 7 CEM7 + CEC7

High frequency • • • •
Low frequency • • • •
High voltage • • • •
Low voltage • • • •
Alternator Protections

Short-circuit • • •
Asymmetry between phases • • • •
Incorrect phase sequence • • • •
Inverse power • • •
Overload • • •
Genset signal drop • • • •
Total hour counter • • • •
Partial hour counter • • • •
Kilowatt meter • • • •
Starts valid counters • • • •
Counters

Starts failure counters • • • •

Maintenance • • • •
RS232 ⓪ ⓪ ⓪ ⓪
RS485 ⓪ ⓪ ⓪ ⓪
Modbus IP ⓪ ⓪ ⓪ ⓪
Modbus ⓪ ⓪ ⓪ ⓪
CCLAN ⓪ ⓪ ⓪
Software for PC ⓪ ⓪ ⓪ ⓪
Analogue modem ⓪ ⓪ ⓪ ⓪
Communications

GSM/GPRS modem ⓪ ⓪ ⓪ ⓪
Remote screen ⓪ ⓪ ⓪
Tele signal ⓪ (8 + 4) ⓪ (8 + 4) ⓪ (8 + 4)
J1939 ⓪ ⓪ ⓪

Alarm history • • • •
(10) / (opc. +100) (10) / (opc. +100) (10) / (opc. +100) (10) / (opc. +100)
External start • • • •
Start inhibition • • • •
Mains failure start • • •
Start under normative EJP • • •
Pre-heating engine control • • •
Genset contactor activation • • • •
Mains & Genset contactor activation • • •
Fuel transfer control • • •
Engine temperature control • • •
Manual override • • •
Programmable alarms • • •
Genset start function in test mode • • • •
Features

Programmable outputs • • •
Multilingual • • • •
GPS Positioning ⓪ ⓪ ⓪
Synchronisation ⓪ ⓪ ⓪
Mains synchronization
Special Functions

⓪ ⓪ ⓪
Second Zero elimination ⓪ ⓪ ⓪
RAM7 ⓪ ⓪ ⓪
Remote screen ⓪ ⓪ ⓪
Programming timer ⓪ ⓪ ⓪
2020-MAY.-04 18:46

• Standard Optional

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
 HBW-200 T5

CONTROL
PANELS

M5 AS5
Digital manual Automatic panel
Auto-Start control WITHOUT transfer
panel and thermal switch and
magnetic protection WITHOUT mains
(depending on control with CEM7
current and voltage) unit. (*) AS5 as
and differential with optional with CEA7
CEM7. unit. Automatic panel
without transfer
Digital control unit switch and WITH
CEM7 mains control.

CC2 AS5 +
CC2
Himoinsa Switching
cabinet WITH display. Automatic panel
Digital control unit WITH transfer switch
CEC7 and with mains
control. The display
will be on the genset
and on the cabinet.
Digital control unit
CEM7+CEC7

AC5
Automatic mains
failure control panel.
Wall-mounted
cabinet WITH
transfer switch and
thermal magnetic
protection
(depending on
current and voltage).
Digital control unit
CEA7

Electrical system
• Electric control and power panel • Battery charger (standard on • Starter battery/ies installed
with measurements devices gensets with automatic control (cables and bracket included)
and control unit (according to panels)
necessity and configuration) • Ground connection electrical
• Heating resistor (standard on installation with connection
• Adjustable earth leakage sets with automatic control ready for ground spike (not
protection (time & sensitivity) panels) supplied)
standard in M5 and AS5, with
thermal magnetic protection • Battery charger alternator with • Battery Switch (Opcional).
ground connection
• 3-pole thermal magnetic circuit
breaker
2020-MAY.-04 18:46

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com