Boq-1 (Ruidp Sor 2017) Sl. No. Sor Ref Item Description Units Ruidp Sor 2017 Rate 1 2 3 5 6
Boq-1 (Ruidp Sor 2017) Sl. No. Sor Ref Item Description Units Ruidp Sor 2017 Rate 1 2 3 5 6
Boq-1 (Ruidp Sor 2017) Sl. No. Sor Ref Item Description Units Ruidp Sor 2017 Rate 1 2 3 5 6
17.3.2 Depth more than 3.0 m and upto 6.0 m Sqm 126.00
Extra for planking, strutting and packing material for
4 17.4 cavities IN CLOSE TIMBERING of sewer line and Sqm 1020.00
BoQ-1 (RUIDP SoR 2017 )
Sl. No. Sor Ref Item Description Units RUIDP SoR
2017 Rate
manholes if required to be left permanently in position
(face area of timber permanently left to be measured)
Add extra for manufacturing of RCC pipe with Sulphate
8 17.21 Resistant Cement instead of OPC/PPC cement : NP3
Pipes
17.21.2.2 200 mm internal diameter metre 12.00
17.21.2.3 250 mm internal diameter metre 14.50
17.21.2.4 300 mm internal diameter metre 23.50
17.21.2.5 350 mm internal diameter metre 54.50
17.21.2.6 400 mm internal diameter metre 61.00
17.21.2.7 450 mm internal diameter metre 67.50
17.21.2.9 600 mm internal diameter metre 99.50
BoQ-1 (RUIDP SoR 2017 )
Sl. No. Sor Ref Item Description Units RUIDP SoR
2017 Rate
Providing and laying plain cement concrete M15 grade
(using mechanical concrete mixer) using 20mm graded
hard crusher broken stone aggregate, laying in layers
of not more than 15cm thick, for bedding having width
= outer dia of pipe (Bc) + 200mm or 1.25Bc (whichever
9 17.30 is higher), thickness below pipe = 0.25Bc or 100mm
(whichever is higher) and haunching = 0.25Bc, for all
type of pipes of following sizes, including compaction,
curing, form work, etc complete as per standard
drawing and/ or as directed by Engineer.
17.30.2 200 mm internal diameter metre 270.00
17.30.3 250 mm internal diameter metre 313.00
17.30.4 300 mm internal diameter metre 377.00
17.30.5 350 mm internal diameter metre 567.00
17.30.6 400 mm internal diameter metre 663.00
17.30.7 450 mm internal diameter metre 767.00
17.30.9 600 mm internal diameter metre 1170.00
Providing at site, lowering, laying, aligning, fixing in
position and
jointing in trenches at all level/ depths, ISI marked
following class AC (Mazza process) pipes for sewer and
drainage application as per IS 6908-1991 (amended upto
date) with AC coupler joints sealed with Rubber gaskets
17.23
(EPDM/SBR) as per IS 5382 complete including cost of all
materials, labour, jointing, water, sectional hydro testing
(including cost and conveyance of water to site for testing)
etc. and commissioning as per Technical Specifications
and as per direction of Engineer.
Note : E/w to be measured and paid separately.
17.23.1 Class-1
17.23.1.1 150mm Nominal dia 435
17.23.1.2 200 mm Nominal dia 665
17.23.1.3 250 mm Nominal dia 855
17.23.1.4 300 mm Nominal Dia 1100
17.23.1.5 350 mm Nominal Dia 1380
17.23.1.6 400 mm Nominal Dia 1690
17.23.1.7 450 mm Nominal Dia 2000
17.23.1.8 500 mm Nominal Dia 2500
600 mm Nominal Dia
17.23.1.9 3520
17.23.1.10 700 mm Nominal Dia 5550
17.23.1.11 800 mm Nominal Dia 7170
17.23.1.12 900 mm Nominal Dia 9110
17.23.1.13 1000 mm Nominal Dia 11100
BoQ-1 (RUIDP SoR 2017 )
Sl. No. Sor Ref Item Description Units RUIDP SoR
2017 Rate
Providing, fixing and constructing of pre-cast RCC M-
40 grade circular manholes with internal dia 1.0m and
up to specified depth having pre-cast RCC M-40 grade
circular manhole cover frame (ID 0.56m, OD 0.86m,
height 0.20m), conical piece (top ID 0.56m, bottom ID
1.0m, vertical height 0.605m, wall thickness 125mm),
and circular rings of required heights (ID 1.0m, height
150 / 300 mm, wall thickness 125mm) below conical
piece as per required depth of manhole and having
steel reinforcement in all pieces of manhole @ not less
than 80 kg per cum of concrete, including cast-in-situ
PCC M-10 grade (1:3:6) foundation of 1.625m dia and
10 17.55 150mm thickness, PCC M15 grade circular wall ID
0.925m, wall thickness 200mm, height equal to OD of
sewer pipe + 50 mm, PCC M15 grade benching and
channel portion and up to top level of sewer pipe etc
complete with curing compaction and form work,
supplying and fixing heavy duty SFRC manhole cover
as per IS 12592 (Part I and II), supplying and fixing
plastic encapsulated CI/MS foot steps, including cost of
shuttering, steel reinforcement, testing for water
tightness etc complete in all respect as per drawing, as
per specification and the direction of the Engineer.
Note:- Excavation of earth work and road cutting for
manhole will be measured and paid separately.
Pre-cast RCC M-40 grade circular manholes 1.055 m
deep to invert with pre-cast manhole cover frame
(height 0.20), conical piece (height 0.605), cast-in-situ
17.55.1 PCC M-10 grade foundation, PCC M15 grade circular each 10980.00
wall ID 0.925m, wall thickness 200mm height equal to
OD of sewer pipe + 50mm, PCC M15 grade benching
and channel portion.
Providing and fixing pre-cast RCC M-40 grade circular
ring of ID 1.0m, wall thickness 125mm, height 150 /
17.55.2 300 mm for constructing extra depth of manhole for Mtr. 5544.00
depth beyond 1.055m as per drawing
BoQ-1 (RUIDP SoR 2017 )
Sl. No. Sor Ref Item Description Units RUIDP SoR
2017 Rate
Providing, fixing and constructing of pre-cast RCC M-
40 grade circular manholes with internal dia 1.2m and
up to specified depth having pre-cast RCC M-40 grade
circular manhole cover frame (ID 0.56m, OD 0.86m,
height 0.20m), conical piece (top ID 0.56m, bottom ID
1.2m, vertical height 0.805m, wall thickness 125mm),
and circular rings of required heights (ID 1.2m, height
150/ 300/ 600/ 900mm, wall thickness 125mm) below
conical piece as per required depth of manhole and
having steel reinforcement in all pieces of manhole @
not less than 80 kg per cum of concrete, including cast-
in-situ PCC M-10 grade (1:3:6) foundation of 1.825m
11 17.56 dia and 150mm thickness, PCC M15 grade circular
wall ID 1.125m, wall thickness 200mm, height equal to
OD of sewer pipe +50mm, PCC M15 grade benching
and channel portion and up to top level of sewer pipe
etc complete with curing compaction and form work,
supplying and fixing heavy duty SFRC manhole cover
as per IS 12592 (Part I and II), supplying and fixing
plastic encapsulated CI/MS foot steps, including cost of
shuttering, steel reinforcement, testing for water
tightness etc complete in all respect as per drawing, as
per specification and the direction of the Engineer.
Note:- Excavation of earth work and road cutting for
manhole will be measured and paid separately.
Pre-cast RCC M-40 grade circular manholes 1.255 m
deep to invert with pre-cast manhole cover frame
(height 0.20), conical piece (height 0.805), cast-in-situ
PCC M-10 grade foundation, PCC M15 grade circular
17.56.1 wall ID 1.125m, wall thickness 200mm height equal to each 13770.00
OD of sewer pipe +50 mm, PCC M15 grade benching
and channel portion.