Professional Documents
Culture Documents
LTMD-Q Series MW Series: Multi-Turn Actuator 0.2 37kW Nuclear Power Plant Gear Reducer - Worm, Bevel 51 30,600kgf.m
LTMD-Q Series MW Series: Multi-Turn Actuator 0.2 37kW Nuclear Power Plant Gear Reducer - Worm, Bevel 51 30,600kgf.m
Multi-turn actuator 0.2~37kW (Nuclear Power Plant) Gear reducer - Worm, Bevel 51 ~ 30,600kgf.m
The specification of actuator is subject to change without prior notice for on-going product improvement. Publication No. CAT-07-002 REV5, 2015.11
LEC Series TM Series
Self-descending actuator (1 ~ 20 Ton) 0.1 ~ 2.2kW Multi-turn 0.2~37kW
Head Office & Factory: #344 Neungyeo-Ro, Neungseo-Myeon, Yeoju-Si, Gyeonggi-Do, Korea Tel: 031)880-2800 Fax: 031)881-5860
Seoul Office: 18F, Un-Ik B/D., #430, Eonju-ro, Gangnam-Gu, Seoul, Korea Tel: 02)555-0883 Fax: 02)556-3026
UAE Office: P.O. Box : 25660, Makateb Bldg. #914, Airport Road, Deira, Dubai, UAE Tel: +971-4-2948-355 Fax:+971-4-2943-455
❷ Position Indicator
Dial indicator ranging from 0 ~ 100%
Option : LCD display is available for the model with integral control unit
❸ Limit switch
Setting and adjusting is easy by using a screwdriver
❹ Torque switch
Automatically stops the motor when the torque larger than the set value set is appiled
to the valve shaft
❺ Potentiometer
Slip mechanism is provided for easy modification of zero points, achieved by rotating
the potentiometer shaft with a screwdriver
❼ Handwheel
Side-mounted for easy access to manual operation
❽ Change lever
Automatically declutches to switch-over from manual to electric operation
❾ Terminal block
9-1 Basic type : located inside the actuator body.
9-2 Integral control unit type : located at the rear of integral control unit which is double
sealed with V-ring and gasket to prevent the ingress of foreign objects or substances even
when the terminal cover is removed for on-site wiring.
9-3 As an option for basic type : additional double sealed terminal block is available separately.
Option
Non-penetrating push buttons (Open/Stop/Close/Reset), Local/Off/Remote Selector, Open/Fault/Close
Integral Control Unit LED lights, Reversing Contactor, Reverse phase detector, Monitor Relay, Double Sealed Terminal Block
※ Additional Option; Automatic Phase Correcting Function(TQ-010; N/A)
Encoder Torque Sensing Remote Controller
Potentiometer 1㏀
Position Transmitter Output 4~20mA DC