Electric Actuator

NTQ Series

NUTORK CORPORATION
 Features

1. Housing:hard-anodized AL alloy and external coating of epoxy powder is suitable for the severe condition especially
against the corrosion.Housing is designed in accordance with standard of Explosion-proof and IP67.and also we can
offer NUTORKTM NTQ with IP68 for option.
2. Motor: specially designed with squirrel caged induction motor to generate high starting torque and high efficiency
equipped with thermal protector to prevent damage from over heating.it has several features such as high output
power,high efficiency and lower noise.
3. PCU: high performance microprocessor, auto-calibration provides the most convenient to user without complicated set
in field.
4. Sealing: sealing provided by double O-ring system.
5. Handwheel: Just by pulling over the lever, operating mode is switched to manual. then just supplying electrical power
to actuator, clutch is automatically disengaged from manual and operating mode is switched to electric operation. The
size of hand wheel is designed according to required torque to move the actuator, so that operator can easily move
6. Gear & self locking: 2nd staged double worm gearing prevents movment caused by backward force transferred from
valve and it provides the exact and stable position of actuator and valve when the power is off. High efficiency, high
output torque, low noise level are another advantages.

1 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Features

7. Limit switches: directly engaged with driving shaft to set accurate position of valve. Torque swithces: to protect actuator
from damage caused by over torque from the driven valve over the whole travel.
8. Anti-condensation space heater: the switch is open when the temperature is around 203 to protedct actuator
condensation; The switch is close when the temperature is over 303 to prevent over heating.
9. Stopper bolt: stopper bolt installed both close and open direction prevents actuators travel the limit during
manual operation and also protects internal gearing from its breakaway.
10. Indicator: through the large size indicator window provides bettr position indication form a distance.
11. Terminal block: it is easy to add the number of strip for additional connection, spring loaded terminal strip is very
strong against vibration.
12. Wiring: the inside wiring is so simple and easy to connect.
13. Driving bushing: the driving bushing is removable to process, mounting base is designed according to ISO5211, it is
convenient to adapt with valve.
14. Lubrication: all the gears and shafts use CIATM221 type Grease Moly, it is not necessary to refill lubricant for 5
years.
15. Anti-interference magnetic loop: it effectively prevents the actuator from outside magnetic field, and keeps the
actuator operating stable.

NUTORK
TM
www.nutork.com NTQ Electric Actuator 2
 Features

NUTORKTM NTQ electric actuator guaranty high performance and stable quality
product throughout severe test and inspection. We can provide advanced intelligent
model with different models for option.

1. Using very large scale digital integrated chip, so it has very powerful function and high accuracy. Once the actuator is

supplied power, it will auto-check the control circuit to insure the correct operation.

2. Displacement transducer of actuator is n. hall sensor with digital quantization impulse signal, Hall magnetically pulse

effects system can measure and control the travel of actuator exactly.

3. Using IA infrared ray system, IA always supports communication compatible with IrDA. The function specification of

actuator can be set, adjusted and operated by handheld infrared remote controller, it is not necessary to open the top

cover to reveal the inner control circuit.

4. Using liquid crystal display with high-resolution, English mark to indicate the travel percent of valve, It is very convenient

to use in the night. LED signal with high lightness to indicate the position of actuator: full open-Red, full close-Green.

The backup batteries will support the LED display when the main power is off.

5. The remote and local control (open/close/stop) function, with local lamp indication: full colse-Green (on). Closing-Green

(flickering). Torque switch trip-Yellow (on), Fault-Yellow (Flickering). Full open-Red(on), Opening-Red(Flickering).

Reversing, electronic contactors, Transformer, Phase discriminator has detection and auto-correction. 24 to 48 points

terminal strips on terminal block for option. Position monitoring relays with remote position indication, local digital position

indication.

3 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Standard Specification

NEMA

(SPDT 250VAC/10A rating except for NTQ100)

Set

De-clutchable

Space heater

powder

NUTORK
TM
www.nutork.com NTQ Electric Actuator 4
 Option Availability

central

5 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Technical Information

Type NTQ100 NTQ160 NTQ240 NTQ350 NTQ500 NTQ800 NTQ1100 NTQ1500 NTQ2000 NTQ3000

Torque(Nm) 100 160 240 350 500 800 1100 1500 2000 3000

Duty cycle(%) 40 30 30 30 30 30 30 30 30 30

Operating 50Hz 21 26 26 31 31 39 39 93 117 117

time(sec) 60Hz 18 22 22 26 26 32 32 78 97 97

Max bore Key type 22 25 25 40 40 48 48 75 75 75

size(mm) Squaretype 22 23 23 34 34 40 40 64 64 64

Rated current(A)

1Phase/110V 50Hz 0.98 1.60 1.62 1.72 3.60 3.90 3.90 3.60 3.80 3.80

60Hz 1.10 1.70 1.72 1.80 3.90 4.20 4.30 3.90 4.20 4.20

1Phase/220V 50Hz 0.52 0.85 0.87 0.92 1.50 2.05 2.15 1.50 2.05 2.15

60Hz 0.58 0.90 0.90 0.95 1.60 2.20 2.30 1.60 2.20 2.30

3Phase/380V 50Hz 0.43 0.30 0.32 0.32 0.52 0.82 0.84 0.52 0.82 0.84

60Hz 0.33 0.30 0.32 0.32 0.56 0.88 0.90 0.56 0.88 0.90

3Phase/440V 50Hz 0.59 0.30 0.32 0.32 0.55 0.82 0.84 0.55 0.82 0.84

60Hz 0.42 0.32 0.35 0.35 0.58 0.88 0.88 0.58 0.88 0.88

Motor insulation class F F F F F F F F F F

Motor power 15W 40W 40W 40W 90W 180W 180W 90W 180W 180W

ISO 5211 mounting

Weight(kgs) 7 15 15 15 20 25 25 65 75 75

No. of handwheelturns 10 12 12 14 14 17 17 65 70 70

NUTORK
TM
www.nutork.com NTQ Electric Actuator 6
 Construction

7 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Parts List

Part Name Part Name Part Name

NUTORK
TM
www.nutork.com NTQ Electric Actuator 8
 Dimension

9 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Dimension

With Gear Box

NUTORK
TM
www.nutork.com NTQ Electric Actuator 10
 Dimension

Mounting Dimension

NTQ-100 NTQ-160,240

NTQ-1500,2000,3000

NTQ-350,500 NTQ-800,1100

NTQ-100 NTQ-160,240 NTQ-350,500 NTQ-800,1100 NTQ-1500,2000,3000

12 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Wiring Diagram
Wiring Diagram(NTQ100)

Wiring Diagram(NTQ160NTQ3000)

NUTORK
TM
www.nutork.com NTQ Electric Actuator 12
 Wiring Diagram

Wiring Diagram(NTQ160NTQ3000)

Wiring Diagram(NTQ160NTQ3000)

13 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Wiring Diagram

Wiring Diagram(NTQ100NTQ300)

NUTORK
TM
www.nutork.com NTQ Electric Actuator 14
 Wiring Diagram

15 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Wiring Diagram
(LD2 for 3phase) Wiring Diagram

NUTORK
TM
www.nutork.com NTQ Electric Actuator 16
 Wiring Diagram

PCU Wiring Diagram

17 NUTORK
TM
www.nutork.com NTQ Electric Actuator
 Order Information

NTQ-
Mode Torque Power Control Type Protection Option

1)Weather-Proof
NTQ 100 1)24VDC 1)on/off IP67
1)Lever & Yoke

2)Explosion-Proof
160 2)110VAC 2)modulating 2)Local Control Unit
EExdIIBT4

240 3)220VAC

350 4)380VAC

500 5)440VAC

800

1100

1500

2000

3000