Professional Documents
Culture Documents
UCM274E
UCM274E
UCM274E
SPECIFICATIONS & OPTIONS
TERMINALS & TERMINAL BOX Standard generators are 3-phase reconnectable with 12 ends brought out to the terminals, which are mounted on a cover at the non-drive end of the generator. A sheet steel terminal box contains the AVR and provides ample space for the customers' wiring and gland arrangements. It has removable panels for easy access. SHAFT & KEYS This sophisticated Automatic Voltage Regulator (AVR) is incorporated into the Stamford Permanent Magnet Generator (PMG) control system, and is standard on marine generators of this type. The PMG provides power via the AVR to the main exciter, giving a source of constant excitation power independent of generator output. The main exciter output is then fed to the main rotor, through a full wave bridge, protected by a surge suppressor. The AVR has in-built protection against sustained overexcitation, caused by internal or external faults. This de-excites the machine after a minimum of 5 seconds. An engine relief load acceptance feature can enable full load to be applied to the generator in a single step. If three-phase sensing is required with the PMG system the MX321 AVR must be used. We recommend three-phase sensing for applications with greatly unbalanced or highly non-linear loads. MX321 AVR The most sophisticated of all our AVRs combines all the features of the MX341 with, additionally, threephase rms sensing, for improved regulation and performance. Over voltage protection is built-in and short circuit current level adjustments is an optional facility. WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This eliminates triplen (3rd, 9th, 15th ) harmonics on the voltage waveform and is found to be the optimum design for trouble-free supply of non-linear loads. The 2/3 pitch design avoids excessive neutral currents sometimes seen with higher winding pitches, when in parallel with the mains. A fully connected damper winding reduces oscillations during paralleling. This winding, with the 2/3 pitch and carefully selected pole and tooth designs, ensures very low waveform distortion. All generator rotors are dynamically balanced to better than BS6861:Part 1 Grade 2.5 for minimum vibration in operation. Two bearing generators are balanced with a half key. INSULATION/IMPREGNATION The insulation system is class 'H'. All wound components are impregnated with materials and processes designed specifically to provide the high build required for static windings and the high mechanical strength required for rotating components. QUALITY ASSURANCE Generators are manufactured using production procedures having a quality assurance level to BS EN ISO 9001. The stated voltage regulation may not be maintained in the presence of certain radio transmitted signals. Any change in performance will fall within the limits of Criteria 'B' of EN 61000-6-2:2001. At no time will the steady-state voltage regulation exceed 2%.
STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications can be considered on request. VOLTAGE REGULATORS MX341 AVR - STANDARD
NB Continuous development of our products entitles us to change specification details without notice, therefore they must not be regarded as binding. Front cover drawing typical of product range.
UCM274E
WINDING 311
CONTROL SYSTEM A.V.R. VOLTAGE REGULATION SUSTAINED SHORT CIRCUIT INSULATION SYSTEM PROTECTION RATED POWER FACTOR STATOR WINDING WINDING PITCH WINDING LEADS STATOR WDG. RESISTANCE ROTOR WDG. RESISTANCE EXCITER STATOR RESISTANCE EXCITER ROTOR RESISTANCE R.F.I. SUPPRESSION WAVEFORM DISTORTION MAXIMUM OVERSPEED BEARING DRIVE END BEARING NON-DRIVE END 1 BEARING WEIGHT COMP. GENERATOR WEIGHT WOUND STATOR WEIGHT WOUND ROTOR WR INERTIA SHIPPING WEIGHTS in a crate PACKING CRATE SIZE 492 kg 180 kg 167.5 kg 1.3271 kgm 525 kg 123 x 67 x 103 (cm) 50 Hz TELEPHONE INTERFERENCE COOLING AIR VOLTAGE SERIES STAR VOLTAGE PARALLEL STAR VOLTAGE SERIES DELTA kVA BASE RATING FOR REACTANCE VALUES Xd DIR. AXIS SYNCHRONOUS X'd DIR. AXIS TRANSIENT X''d DIR. AXIS SUBTRANSIENT Xq QUAD. AXIS REACTANCE X''q QUAD. AXIS SUBTRANSIENT XL LEAKAGE REACTANCE X2 NEGATIVE SEQUENCE X0 ZERO SEQUENCE REACTANCES ARE SATURATED T'd TRANSIENT TIME CONST. T''d SUB-TRANSTIME CONST. T'do O.C. FIELD TIME CONST. Ta ARMATURE TIME CONST. SHORT CIRCUIT RATIO 380/220 190/110 220/110 120 2.01 0.18 0.12 1.31 0.15 0.07 0.14 0.09 THF<2% 0.514 m/sec 1090 cfm 400/231 200/115 230/115 120 1.81 0.16 0.11 1.18 0.14 0.07 0.12 0.08 415/240 208/120 240/120 120 1.68 0.15 0.10 1.10 0.13 0.06 0.11 0.07 440/254 220/127 254/127 N/A 416/240 208/120 240/120 135 2.26 0.21 0.14 1.47 0.19 0.08 0.16 0.09
2
SEPARATELY EXCITED BY P.M.G. MX321 0.5 % MX341 1.0 % With 4% ENGINE GOVERNING
REFER TO SHORT CIRCUIT DECREMENT CURVES (page 7) CLASS H IP23 0.8 DOUBLE LAYER CONCENTRIC TWO THIRDS 12 0.0317 Ohms PER PHASE AT 22C SERIES STAR CONNECTED 1.34 Ohms at 22C 20 Ohms at 22C 0.091 Ohms PER PHASE AT 22C BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0% 2250 Rev/Min BALL. 6315-2RS (ISO) BALL. 6310-2RS (ISO) 2 BEARING 511 kg 180 kg 156.6 kg 1.2765 kgm 2 539 kg 123 x 67 x 103 (cm) 60 Hz TIF<50 0.617 m/sec 1308 cfm 440/254 220/127 254/127 137.5 2.06 0.19 0.13 1.34 0.17 0.07 0.15 0.08 460/266 230/133 266/133 140 1.91 0.18 0.13 1.25 0.16 0.07 0.13 0.08 480/277 240/138 277/138 144 1.81 0.17 0.11 1.18 0.14 0.06 0.13 0.07
VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED 0.032 s 0.01 s 0.85 s 0.007 s 1/Xd
50 Hz
UCM274E
Winding 311 THREE PHASE EFFICIENCY CURVES
60 Hz
UCM274E
Winding 311 THREE PHASE EFFICIENCY CURVES
UCM274E
Winding 311 Locked Rotor Motor Starting Curve
50
30
Hz
346V
380V
400V
415V
25
20
PER CENT TRANSIENT VOLTAGE DIP
15
10
300
350
400
450
500
60
30
Hz
380V
416V
440V
460V
480V
25
20
PER CENT TRANSIENT VOLTAGE DIP
15
10
0 0 50 100 150 200 250 300 350 400 450 500 550 600 650
LOCKED ROTOR kVA
UCM274E
Three-phase Short Circuit Decrement Curve. No-load Excitation at Rated Speed Based on star (wye) connection.
50 Hz
10000
SYMMETRICAL ASYMMETRICAL
CURRENT (Amps)
1000
100
10 0.001
0.01
10
60 Hz
10000
SYMMETRICAL ASYMMETRICAL
CURRENT (Amps)
1000
100
10 0.001
0.01
10
Note 2 The following multiplication factor should be used to convert the values calculated in accordance with NOTE 1 to those applicable to the various types of short circuit :
3-phase 2-phase L-L 1-phase L-N
60Hz
Voltage 416v 440v 460v 480v Factor X 1.00 X 1.06 X 1.12 X 1.17
Instantaneous x 1.00 x 0.87 x 1.30 Minimum x 1.00 x 1.80 x 3.20 Sustained x 1.00 x 1.50 x 2.50 Max. sustained duration 10 sec. 5 sec. 2 sec. All other times are unchanged Note 3 Curves are drawn for Star (Wye) connected machines. For other connection the following multipliers should be applied to current values as shown : Parallel Star = Curve current value X 2
UCM274E
Winding 311 / 0.8 Power Factor RATINGS
Class - Temp Rise Cont. E - 65/50C 380 190 220 400 200 230 93.8 75.0 92.7 80.9 415 208 240 93.8 75.0 92.8 80.9 440 220 254 N/A N/A N/A N/A 380 190 220 Cont. B - 70/50C 400 200 230 415 208 240 440 220 254 N/A N/A N/A N/A 380 190 220 Cont. F - 90/50C 400 200 230 415 208 240 440 220 254 N/A N/A N/A N/A Cont. H - 110/50C 380 190 220 400 200 230 415 208 240 440 220 254 N/A N/A N/A N/A Series Star (V) Parallel Star (V) Series Delta (V)
50
Hz
100.0 100.0 100.0 80.0 92.4 86.6 80.0 92.6 86.4 80.0 92.8 86.2
112.5 112.5 112.5 90.0 92.1 97.7 90.0 92.4 97.4 90.0 92.5 97.3
60
Hz
kVA 105.0 110.0 115.0 115.0 110.0 112.5 118.8 118.8 125.0 131.3 137.5 137.5 135.0 137.5 140.0 144.0 kW 84.0 Efficiency (%) 92.6 kW Input 90.7 88.0 92.8 94.8 92.0 92.9 99.0 92.0 93.0 98.9 88.0 92.5 95.1 90.0 92.8 97.0 95.0 92.9 95.0 93.0 100.0 105.0 110.0 110.0 108.0 110.0 112.0 115.2 92.3 92.5 92.6 92.8 92.0 92.3 92.6 92.7
102.3 102.2 108.3 113.6 118.8 118.5 117.4 119.2 121.0 124.3
DIMENSIONS
Barnack Road Stamford Lincolnshire PE9 2NB Tel: 00 44 (0)1780 484000 Fax: 00 44 (0)1780 484100
2006
TD_UCM274E.GB_10.06_04_GB