Series R1E02 General Description Technical Information: Pressure Relief Valves
Series R1E02 General Description Technical Information: Pressure Relief Valves
Series R1E02 General Description Technical Information: Pressure Relief Valves
General Description
Series R1E02 direct operated, pressure relief valves
are seated type valves typically used for remote pres-
sure controls. In applications where the reliabilitiy and
simplicity of a hydraulic remote control are preferred to
an electrohydraulic system, Series R1E02 is an ideal
solution.
Typically pilot operated pressure valves or compensa-
Foot Mounting Front Panel Mounting
tors of variable pumps are controlled.
Features
• Seated type valve.
• 3 body variants:
- foot mounting
D
- front panel mounting
- subplate mounting
• 3 pressure ranges.
• 3 adjustment modes: Subplate Mounting
- hand knobs
- acorn nut with lead seal
- adjusting with lock
R1E02.indd, dd
Ordering Information
R1E02 2 A 1
Pressure Interface Pressure Connections Adjustment Design Seal Options
Relief Valve Range G1/4" Series Nitrile Check
with
Factory
Code Description Code Description Code Description
1 Foot Mounting 1 up to 105 Bar (1523 PSI) 1 Hand Knob Ø32mm
2 Front Panel Mounting 3 up to 210 Bar (3045 PSI) 3 Acorn Nut with Lead Seal
3 Subplate Mounting 5 up to 350 Bar (5075 PSI) 4 * Adjusting Device with Lock
(Key Order No. 700-70619)
Weight: Seal Kit: * on bodies for subplate mounting use
R1E021 2.1 kg (4.6 lbs.) R1E021 S26-58466-0 plate S16-64188.
R1E022 2.1 kg (4.6 lbs.) R1E022 S26-58466-0
R1E023 1.0 kg (2.2 lbs.) R1E023 S16-91963-0
Specifications
D
General
Size 1/4"
Interface Foot mounting, Front panel mounting, Subplate mounting
Mounting Position Unrestricted
Ambient Temperature Range -20°C to +70°C (-4°F to +158°F)
Hydraulic
Maximum Operating Pressure Port P 350 Bar (5075 PSI); Port T depressurized
Pressure Range 105 Bar (1523 PSI), 210 Bar (3045 PSI), 350 Bar (5075 PSI)
Fluid Hydraulic oil as per DIN 51524 ... 51525
Fluid Temperature -20°C to +70°C (-4°F to +158°F)
Nominal Flow 3.8 LPM (1.0 GPM)
Minimum Pressure Setting 7 Bar (102 PSI)
Viscosity Permitted 10 to 650 cSt / mm2/s (46 to 3013 SSU)
Recommended 30 cSt / mm2/s (139 SSU)
Filtration ISO Class 4406 (1999) 18/16/13
Performance Curve
R1E02.indd, dd
Foot Mounting
Subplate Mounting
Subplate Size
518-00139-0 3/8" NPT
R1E02.indd, dd