CHE
CHE
The courses for B. Sc. Honors degree in Chemistry will be offered in four years. Each year will
be divided into two semesters. Each semester consists of eleven weeks (the weeks may not be
contiguous to accommodate various holidays). One lecture or minimum two laboratory hours per
week is assigned as one credit of the course.
The courses are classified into the following groups:
(a) Major courses: At least 60% courses will be offered by the Chemistry Discipline.
(b) Non major courses: At least 20% courses will be offered by other than Chemistry discipline:
Physics, Mathematics, Statistics, Electronics and Computer Science etc,
(c) Other courses as per the University regulation mandatory two language courses (one Bengali
and one English or two English courses)
A student has to complete at least 140 credits to graduate in Chemistry in four years.
First Year Semester II (Session 2008-2009): Any one of the following language course {either ENG-103 or BNG-
101} has to be taken on the availability of the teacher.
Page 1 of 22
2
Fourth Year Semester II (Session 2008-2009) (Any of the course CHE-471 and CHE-472)
Total credits: 16.0 + 20.0 + 20.0 + 18.5 + 19.5 + 18.5 + 18.0+ 14.0 =144.5
Detailed Syllabus
CHE-101G GENERAL CHEMISTRY (For Genetics)
3 Hours/Week, 3 Credits
Page 2 of 22
3
1. Electronic Structure: Quantum theory, atomic spectrum of hydrogen and the Bohr model, Quantum numbers,
Concept of Energy levels and atomic orbital, Electronic configuration, Chemical bonding and molecular structure.
2. The periodic Table: Development of the periodic table, Electron arrangements and the periodic table, Summarized
chemical properties of s-block, p-block and d-block elements.
3. Introduction to Thermodynamics: The Basic Concepts: Systems and surroundings, State and state functions,
Equilibrium states and reversibility, Energy, Heat and work. The First Law: Statement and formulation, Derivation
of expression for expansion work and its application at different conditions, Heat capacity. Relation between Cp &
Cv
4. Acids and Bases: Theories and Modern definition of acids and bases, Dissociation constant, strength, pH, Buffer
solution etc.
5. Gaseous state: Measurement on gases, the ideal gas law, Volumes of gases involved in reactions, Gas mixtures,
Partial pressure, Kinetic theory of gases, Real gases.
6. Introduction to Chemical Kinetics: Rate laws, rate constant, equilibrium constant, order of reaction etc.
7. Organic Chemistry: Introduction, Classification, Nomenclatures, preparations and Properties (Physical & Chemical)
of (i) Aliphatic and aromatic hydrocarbons, (ii) Aldehydes and ketones, (iii) Carboxylic acids and (iv) Alcohols and
phenols (v) Carbohydrates (mono- and disaccharides)
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Haque & Nawab, Physical Chemistry
3. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
4. Raymond Chang, General Chemistry
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Haque & Nawab, Physical Chemistry
3. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
4. Raymond Chang, General Chemistry
CHE-101I GENERAL CHEMISTRY (For Industrial & Production Engineering)
3 Hours/Week, 3 Credits
Page 3 of 22
4
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Haque & Nawab, Physical Chemistry
3. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
4. Raymond Chang, General Chemistry
1. Electronic Structure: The quantum theory, The atomic spectrum of hydrogen and the Bohr model, Quantum
numbers, Energy levels and orbital, Electronic configuration, Chemical bonding and molecular structure.
2. The periodic Table: Electron arrangements and the periodic table, Summarized chemical properties of s-block, p-
block, d-block and f-block elements.
3. Acids and Bases: Theories and Modern definition of acids and bases, Dissociation constant, strength, pH, Buffer
solution etc.
4. Gaseous State: Measurement on gases, the ideal gas law, Volumes of gases involved in reactions, Gas mixtures,
Partial pressure, Real gases.
5. Introduction to Chemical Kinetics: Rate laws, rate constant, order of reaction etc.
6. Introduction to Electrochemistry, Surface Chemistry and Colloids.
7. Chemical Equilibrium: Equilibrium constant KP, KC, DS, DG, catalyst.
8. Environmental Chemistry: Environmental aspects of Energy—Traditional, Fossil fuel, Nuclear, Solar etc.;
Transportation-Road/Rail, Sea, Air; Agriculture: Fertilizers, Pesticides, Insecticides; Food : Preservatives, Flavor /
Coloring materials; Industry: Building materials, metal industry, detergent, Dye, chemicals related to the agriculture,
cement and ceramic industry.
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Haque & Nawab, Physical Chemistry
3. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
4. Raymond Chang, General Chemistry
5. A. K. Dey, Environmental chemistry
6. J. L. Pyle, Chemistry and the technological black lash.
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Haque & Nawab, Physical Chemistry
3. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
Page 4 of 22
5
1. Electronic Structure: Quantum theory, atomic spectrum of hydrogen and the Bohr model, Quantum numbers,
Concept of Energy levels and atomic orbital, Electronic configuration, Chemical bonding and molecular structure.
2. The periodic Table: Development of the periodic table, Electron arrangements and the periodic table, Summarized
chemical properties of s-block, p-block and d-block elements.
3. Chemical formulas and equations: Types of formulas, Percent composition from formula, Formulas from
experiment, Formulas of ionic compounds, Names of compounds, Mass relations in reactions, Limited reactant and
theoretical yield. Concept of mole, Solution: Different concentration units.
4. Acids and Bases: Theories and Modern definition of acids and bases, Dissociation constant, strength, pH, Buffer
solution etc.
5. Gaseous state: Measurement on gases, the ideal gas law, Volumes of gases involved in reactions, Gas mixtures,
Partial pressure, Kinetic theory of gases, Real gases.
6. Introduction to Chemical Kinetics: Rate laws, rate constant, equilibrium constant, order of reaction etc.
7. Organic Chemistry: Introduction, Classification, Nomenclatures, preparations and Properties (Physical & Chemical)
of (i) Aliphatic and aromatic hydrocarbons, (ii) Aldehydes and ketones, (iii) Carboxylic acids and (iv) Alcohol s and
phenols (v) Carbohydrates (mono- and disaccharides).
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Haque & Nawab, Physical Chemistry
3. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
4. Raymond Chang, General Chemistry
Book Recommended:
1. Vogel, Qualitative Inorganic Analysis
Experiments will be based on CHE-101 theory class (Inorganic & organic section only)
Books Recommended:
1. Vogel, Qualitative Inorganic Analysis
2. A.I. Vogel, A Text Book of Practical Organic Chemistry
3. A.I. Vogel, Elementary Practical Organic Chemistry (Part 1)
4. Vogel, Text book of Quantitative Analysis.
Experiments will be based on CHE-101 theory class (Inorganic & organic section only)
Books Recommended:
1. Vogel, Qualitative Inorganic Analysis
2. A.I. Vogel, A Text Book of Practical Organic Chemistry
3. A.I. Vogel, Elementary Practical Organic Chemistry (Part 1)
4. Vogel, Text book of Quantitative Analysis.
Experiments will be based on CHE-101 theory class (Inorganic & organic section only)
Books Recommended:
1. Vogel, Qualitative Inorganic Analysis
2. A.I. Vogel, A Text Book of Practical Organic Chemistry
Page 5 of 22
6
1. Basic Principle of Physical Chemistry States of aggregation: Solid, liquid, gaseous state; State variables,
Standard state & reference state, Nature of Chemical bonding, Vander Waal’s forces; Adhesive & Cohesive forces,
Physical principles involved in Physical and Chemical changes; Transition between different states;
Energy: Different forms, kinetic energy & potential energy, translational, rotational & vibrational & electronic
Energy, Degree of freedom of motion, Equipartition of energy, Quantisation of Energy, Electromagnetic radiation:
Nature & different regions,
Fundamental and compounded units; Calculations based on Empirical and Molecular formula, Composition,
balanced chemical equation.
2. Preliminary ideas about Gaseous State: Ideal gas & gas laws, Equation of state, Dulton’s law of partial
pressure, Avogadro’s theory, kinetic theory of gases & pressure, kinetic energy calculation, distribution of molecular
velocities, collision frequency, density & cross-section, Mean free path, Maxwell-Boltzmann distribution of
molecular velocities, average velocity, most probable velocity, Molecular interpretation of perfect and real gases,
Compression factor & Amagat’s curve; Vander Walls & Virial equations for real gases; Theory of corresponding
states; Principle of Liquefaction, Andrew’s Experiment & critical phenomena
3. The Liquid State: Molecular interpretation, Measurement of vapor pressure & it’s variation with temperature;
Vaporization, Evaporation & boiling temperature of a liquid & liquid mixture; Surface tension and viscosity,
polarity & dielectric constant, dipole moment; Ideal and non ideal solution, solubility and it’s variation with
temperature and pressure, Henry’s law & Roult’s law, Nernst distribution law, Colligative properties and their
applications. Concept of ppm, ppb, molarity, molality & mole fraction
4. The Solid State: Molecular interpretation, Crystalline and amorphous solids, Crystal lattice & lattice energy, Unit
cell, Elementary idea on Crystal Systems, Solubility of ionic solids and solvation energy
5. Fundamentals of Chemical Equilibrium &Chemical Kinetics: Law of mass action, Equilibrium law
equilibrium constant, Relation between Kp, Kc and Kx, Le chaltelier principle, effect of temperature, pressure,
concentration and inert gas on K, application of K, Temperature dependence of K. Rate of reaction & measurement,
rate constant & order of a reaction, Differential rate equation, Half life of a reaction, Temperature effect on reaction
rate.
Books Recommended:
1. Ramsdan, A-Level Chemistry
2. Raymond Chang, General Chemistry
3. P.W. Atkins, Elements of Physical Chemistry
4. P.W. Atkins, Physical Chemistry
5. Moore, Physical Chemistry
6. Haque & Nawab, Physical Chemistry
7. Bhal & Tuli, Introduction to Physical Chemistry
CHE-122 Thermodynamics
3 Hours/week, 3 Credits
1. Introduction to Thermodynamics: The Basic Concepts: Systems and surroundings, State and state functions,
Equilibrium states and reversibility, Energy, Heat and work. The First Law: Statement and formulation, Derivation
of expression for expansion work and its application at different conditions, Heat capacity. Relation between Cp &
Cv, Joul-Thomson effect & inversion temperature.
2. Thermochemistry: Extent of reaction, Standard states, Standard enthalpy changes (enthalpy of ionization,
enthalpy of neutralization, enthalpy of a reaction, enthalpy of vaporization, Laws of Thermo chemistry etc.),
Measurement of enthalpy changes, Enthalpies of formation, Temperature dependence of enthalpies of reaction;
Application of first law to different processes of ideal and real gases.
3. The Second and Third Law of Thermodynamics: The Basic Concepts: Spontaneous process, irreversible
process, Entropy; The Second Law: Statement of 2nd law, Carnot cycle, Thermodynamic definition and molecular
interpretation of entropy, Entropy as state function, Entropy change in reversible & irreversible changes, Clausious
inequality calculation of entropy changes accompanying specific processes ( changes of state of aggregation,
isothermal expansion of an ideal gas, mixing of two ideal gases, phase transition etc.), Variation of entropy with
temperature, Condition for equilibrium, The Gibbs energy and the Helmholtz energy, Properties of the Gibbs
energy, Gibbs energy and reversible work; Maxwell relations, Thermodynamic equation of states, Mathematical
relationship between different thermodynamic quantities, Fugacity, Clausius-Clapeyron equation, Chemical
potential of a substance in pure state and in a mixture, Thermodynamic limitations to energy conversion
( refrigeration and liquefaction, heat pumps, chemical conversion), The Third Law: Statement, Nerst heat theorem,
Application of 3rd law: Specific heats of solids.
4. Thermodynamics and Chemical Equilibria: Chemical equilibrium involving ideal and non ideal gases,
Chemical in solution, Temperature and pressure dependence of equilibrium constants, Extent of reaction & reaction
Gibbs energy, Coupled reactions and converting a non spontaneous reaction to spontaneous
5. Thermodynamics of Solutions: Partial molar quantities, Relation of partial molar quantities to normal
thermodynamic properties, Ideal & non ideal solutions, Colligative properties: mathematical formulation and
application.
Books Recommended:
1. P. W. Atkins, Physical Chemistry
2. S. Glasstone, Physical Chemistry
3. Maron and Pruton, Principles of Physical Chemistry
4. Raymond Chang, General Chemistry.
Page 6 of 22
7
1. Introduction: Some preliminaries, history and review of the chemistry of early period.
2.Structure of the atom: Fundamental particles, Bohr’s model of the atom, atomic spectra and atomic structure,
quantum numbers, electron spin, orbital and orbital energies, Pauli exclusion principle, Hund’s rule, Aufbau
principle, electronic configuration of atoms, magnetic properties of atom and ions, ionization potential, electron
affinity and electro negativity, sizes of atoms and ions.
3. Periodic table and classification of elements: Periodic law, classification of the elements in the periodic table,
variation of properties within periods and groups.
4. Chemical bonding and molecular structure: Definition, types of bonds, ionic bond, covalent bonds, formal
charge and Lewis structure, resonance, properties associated with different bond types, valence shell electron pair
repulsion theory (VSEPR), hybridization, preliminary treatment of valence bond theory and molecular orbital
theory, molecular orbital diagram of simple molecules.
5. Bond Polarity and electro negativity: Definition, electro negativity scales, ionic character of covalent bond,
bond energies.
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. J. D. Lee, Concise Inorganic Chemistry.
3. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry.
4. Raymond, Chang General Chemistry.
5. D. Ebbing, General Chemistry.
6. R. D. Madan, Advanced Inorganic Chemistry.
7.Puri and Sharma, Inorganic Chemistry
Lab includes introduction to different methods of inorganic analysis. e.g., solubility, common ion effect,
crystallization.
Books Recommended:
1. Vogel, Qualitative Inorganic Analysis
1. Acids and bases: Modern concepts of acids and bases, strength of acids and bases, leveling effect, super acids,
hard and soft acids and bases, thermodynamic acidity parameters. Periodic trends in aqua acid strength, Chemistry
of oxide and hydroxides.
2. Oxidation and reduction reaction: Electronic concept, oxidation state and oxidation numbers, assignment of
oxidation numbers, balancing of redox reactions, oxidation-reduction potentials, oxidizing reducing agents,
Prediction of redox reaction.
3. Molecular Symmetry: Symmetry operations and elements, symmetry point group, assigning of molecules to
point groups, Symmetry of orbitals.
4. Structure and energetics of inorganic solids: Structure types, packing, ionic radii, radius ratio rules, energetics
of ionic bond formation, stability of solids, lattice energy, Born-Lande expression, application of lattice energies.
5. Solvents and solutions: Solvent properties, donor and acceptor properties, protic and aprotic solvents, chemistry
of some non- aqueous solvents: liquid NH3, hydrogen fluoride, liquid N2O4, BrF3, anhydrous sulphuric acid.
Books Recommended:
1. S. Z. Haider, Introduction to Modern Inorganic Chemistry.
2. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry.
3. J. D. Lee, Concise Inorganic Chemistry.
4. Sharpe, Inorganic Chemistry
5. James E. Huheey, Inorganic Chemistry
6. Owen and Brooker, A Guide to Inorganic Chemistry.
Books Recommended:
1. Vogel, Qualitative Inorganic Analysis
1. Fundamental of Organic Chemistry: Atomic structure and chemical bonding, Atomic and molecular orbitals,
Shape of molecules with special reference to carbon compounds, Hybridization, Polar covalent bonds, Dipole
moment, Polar and nonpolar molecules, Resonance, Inductive effect, Electrophiles & Nucleophiles.
2. Aliphatic Hydrocarbons:
Alkanes: Nomenclature, General methods of preparation, Physical and chemical properties, Uses.
Alkenes: Structure, Nomenclature, General methods of preparation, Physical and chemical properties, Uses.
Alkynes: Structure, Nomenclature, General methods of preparation, Physical and chemical properties, Uses. Acidity
of alkynes, Analysis of alkynes.
Page 7 of 22
8
Dienes: Alkadines and Polyunsaturated hydrocarbon. 1,3-Butadiene: Electron delocalization, stability of conjugated
dienes. Electrophilic attack on conjugated dienes: 1,4 addition. The Diels-Alder Reaction: A 1,4-cycloaddition,
Reaction of Dienes.
3. Aromatic Hydrocarbons: Introduction to aromatic compounds, Structure of benzene, Preparations, Properties
and uses. Electrophilic aromatic substitution, Orientation on substituted benzene derivatives, Determination of
orientation, Friedel Crafts reaction, nitration, sulphonation, and halogenation of arenes.
4. Polycyclic Aromatic Hydrocarbon: Synthesis, physical and chemical properties of naphthalene, phenanthrene
and anthracene.
5. Alkyl and Aryl Halides: Nomenclature and structure, General methods of preparation, Physical and chemical
properties, Uses. Grignard reagent. Introduction to SN1 and SN2 mechanism.
Books Recommended:
1 R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
2 G. Solomon, Organic Chemistry (5th edition)
3. I. L. Finar, Organic Chemistry.
4. F. Carey, Organic Chemistry
Books Recommended:
1. Clark, Experimental Organic Chemsitry
2. A.I. Vogel, A Text Book of Practical Organic Chemistry
3. A.I. Vogel, Elementary Practical Organic Chemistry (Part 1)
1. Alcohol and Phenols: Structure and nomenclature, General methods of preparations including some important
industrial methods, Physical and chemical properties. Primary, secondary and tertiary alcohols.
2. Ether and Epoxides: Structure and nomenclature, Preparation, Williamson synthesis, Industrial source of ether,
Physical properties, Reactions of ether, Cleavage by acids. Preparation, reactions and uses of epoxide.
3. Aldehydes and Ketones: Nomenclature, General methods of preparation of aldehydes and ketones, Reactions of
aldehydes and ketones, Reactions of aldehydes and ketones, Nucleophilic addition, Canizzaro reaction, Aldol
reactions, The Wittig reaction, Haloform reactions.
4. Carboxylic Acids and their derivatives: Structure, Nomenclature, uses, Preparation, Physical and chemical
properties and Synthetic applications.
5. Amines (Aliphatic and Aromatic): Nomenclature, Preparations, reactions and uses of amines.
6. Amides, nitriles, aromatic diazonium salts and Azo dyes.
7. Nitro compounds: Structure, Preparations and Chemistry of aliphatic and aromatic nitro compounds.
Books Recommended:
1. R. T. Morrison & R. N. Boyd, Organic Chemistry (6th edition)
2. G. Solomon, Organic Chemistry (5th edition )
3. I. L. Finar, Organic Chemistry (Vol. 1)
4. F. Carey, Organic Chemistry
CHE-221 ELECTROCHEMISTRY
3 Hours/week, 3 Credits
1. Introduction: Scope of electrochemistry, theories and laws of electrolysis, non-electrolytes and polyelectrolyte.
2. Electrolytic and electronic conduction: Measurement of conductance, molar and equivalent conductance
determination, independent law of ionic migration. Application of conductance measurement. Debye Huckel
Onsager equation for strong electrolytes, Transport number of ions, concept about activity and activity coefficient
of electrolytes Theory of Strong electrolytes. Debye Huckel limiting law, ionic strength, Electrodes: Origin, kinds,
reference electrodes, working electrodes, counter electrodes.
3. Electrochemical cell and concentration cell: Electrode potential and emf of a cell. Cell reaction and derivation
of Nernst equation. Measurement of emf of a cell. factors affecting electrode potential, rates of electrode potential,
different parameters determined by potential measurements (pH, equilibrium constant, activity coefficient, transport
number, oxidation state etc.). electrometric titration, Standard oxidation reduction potential, Different types of cell
used in practical purpose( Quinhydrone electrode, daniel cell and lead storage battery, hydrogen electrode, standard
Page 8 of 22
9
1. Elementary & Complex reactions: Elementary reaction & molecularity, complex reaction: consecutive reaction,
parallel reaction, opposing reaction, steady state & rate determining step approximation, chain reaction.
2Theories of reaction rate: Hard sphere collision theory, Transition state theory for gas phase bimolecular
reactions, Eyring equation, thermodynamic formulation of reaction rate, application; Activated complex theory &
collision theories for reaction in solution, Diffusion-controlled reaction, effect of dielectric constant & pressure on
the rate of reaction in solution, Primary salt effect, Kinetic isotope effect, Unimolecular reaction: Lindemann-
Hinshelwood approach, Steady State approximation method.
3. Mechanism on the basis of kinetic studies:Thermal decomposion of C2H6, CH3CHO, CH3COCH3, O3, COCl2,
hydrogen-bromine reaction and calculation of activation energy, solid state reaction: Tarnish reaction & Wagner
theory, Thermal decomposition: mechanism, solid-solid reaction, Photographic process. Photochemical reaction,
4. Catalysis: Competitive adsorption and kinetics of surface reactions, Arrhenius & van’t Hoff’s intermediate,
Enzyme catalysis: Michaelis-Menten mechanism, Specific & general acid base catalysis, Heterogeneous catalysis:
Outline, application, absorption isotherms & rate law
5. Elements of Photochemistry: Laws of photochemistry, quantum yield and its significance, Photolysis,
Photosensitization, Photo-oxidation, Photoreduction, Photochemistry of molecular O2, anthracene & carbonyl
compounds, Chemiluminescence, flourescence & Phosphorescence, Chemical actimeter; construction & application,
Solar energy & it’s application, some storage system fuel: hydrogen, application. Photovoltaic cell and photocurrent.
Books Recommended:
1. S. Glasstone, Text book of Physical Chemistry
2. P. W. Atkins, Physical Chemistry
3. K.J. Laidler, Chemical Kinetics
4. K.J. Laidler, Reaction Kinetics
5. Steinfeld, Francisco & Huse, Chemical Kinetics and Dynamics
6. Rajaram & Kuriacore, Kinetics and Mechanism of Chemical Transformation.
7. Eyring, Glasstone & Laidler, Theories of Rate Processes.
8.N. B. Hannay, Solid state chemistry
9. A.K. Galway, Chemistry of Solids.
10. Wayne, Photochemistry: Techniques and application.
11. J.W. Moore & Ralph. G. Pearson, Kinetics & Mechanism: A study of homogeneous chemical reactions.
12. Eyring & Eyring, Modern Chemical Kinetics.
Books Recommended:
1.W. D. Perry, General Chemistry Practical
2. Alexander Findlay & J.A.Kichneir , Practical Physical Chemistry.
1.Acid-Base Titration: Preparation of a standard 0.1N oxalic acid solution and standardization of Approx. 0.1N
NaOH.
2.Oxidation- Reduction Titration: Standardization of the given KMnO4 solution (approximate 0.1N) with the
standard oxalic acid solution (0.1N) and determination of Ferrous ion by standard potassium permanganate solution.
3.Iodometric Titration: Standardization of sodium thiosulphate solution with standard potassium dichromate solution
and iodometric determination of copper with sodium thiosulphate solution.
5.Separation and Determination of mixtures: Separation and Quantitative determination of nickel from a mixture.
Page 9 of 22
10
Books Recommended:
1. Vogel, Text book of Quantitative Analysis
2. G. D. Christian, John Wiley & Sons, Analytical chemistry (4th edn.)
3. Braun, Introduction to chemical analysis, McGraw Hill International.
4. Ewing, Instrumental methods of chemical analysis, Mc graw Hill International.
5 Vogel, Inorganic quantitative analysis (4th edn.)
7. Willard, Muritt, Dean and Settle, Instrumental methods of analysis, (6th edn.)
8. Skoog & West, Fundamental of analytical chemistry.
9. Fifield & Kealey , Principles & practice of analytical chemistry.
Chemistry of group IA(1), group II A (2), group IIIB(13), group IV(14), group VB (15), group VIB(16), group
VIIB(17), and group 0(18) elements: Occurrence, preparation, Physical properties(electronic structure, sizes of
atoms and ions, density, ionization energy, electronegativity, melting and boiling points, flame colours and spectra,
etc.), Chemical properties (chemistry of the elements and their compounds, structures and bonding of the
representative elements of each of the above groups).
Books Recommended:
1. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry.
2. Cotton and Wilkinson, Advanced Inorganic Chemistry.
3. J. D. Lee Concise, Inorganic Chemistry.
4. J.E. Huheey, Inorganic Chemistry.
5. Shriver, Atkins and Langford, Inorganic Chemistry
6. Douglas, McDaniel and Langford, Concepts and Models of Inorganic Chemistry
Books Recommended:
1. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry.
2. Cotton and Wilkinson, Advanced Inorganic Chemistry.
3. J. D. Lee Concise, Inorganic Chemistry.
4. J.E. Huheey, Inorganic Chemistry.
5. Shriver, Atkins and Langford, Inorganic Chemistry
6. Douglas, McDaniel and Langford, Concepts and Models of Inorganic Chemistry
7. David Nicholls, Complexes and first-row Tansition Elements
Books Recommended:
1. S.Z.Haider, Advanced Inorganic Chemistry.
2. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry.
3. J.D. Lee, Inorganic Chemistry.
4. Sharpe, Inorganic Chemistry.
5. J.E. Huheey, Inorganic Chemistry.
6. Donglas, McDaniels and Alexander, Concepts and Models of Inorganic Chemistry.
7. Shriver, Atkins and Langford, Inorganic Chemistry.
Stereochemistry: Optical isomerism due to asymmetric carbon atoms, Stereoisomerism, Chirality, Optical activity,
Specific rotations, Enantiomerism, Diastereoisomerism, Meso compounds, Racemic modification, Nature,
Page 10 of 22
11
Formation, Properties and their resolution, Configurations and their notations. Geometrical isomerism in olefinic
compounds, cyclic compounds and in compounds containing C-N bond
Alicyclic Compounds: Cycloalkanes and Cycloalkenes, Nomenclatures, Industrial sources, Preparation, Reactions
of small ring compounds e.g. cyclopropane and cyclobutane. Brayer strain theory. Conformation: Meaning and
physical properties. Factors affecting stability of conformations. Conformations and reactivity of alicyclic
compounds including mono- and disubstituted cyclohexanes.
Chemistry of the compounds containing C-S and C-P bonds: (a)Organo-Sulfur Compounds: Nomenclature,
Physical properties, Preparation and reactions of mercaptans, thioethers, thioaldehydes, thioketone, thioacids,
sulphonic acids and their derivatives. (b)Compounds containing C-P Bonds: Basic Structural features, synthesis
and reactions. Heterocyclic compounds with one hetero atom: Introduction to heterocyclic compounds, General
properties, five membered and six membered rings-structure, sources, synthesis and properties.
Books Recommended:
1. Finar, Organic Chemistry (Vol. I & II)
2. Morrison & Boyd, Organic Chemistry
3. Eliel, Stereochemistry of Carbon Compounds
4. Streitwieser, Organic Chemistry
5. Joules & Smith, Heterocyclic Chemistry
6. Katrisky, Advances in Heterocyclic Chemistry
7. P. S. Kalsi, Stereochemistry of Organic Compounds
8. D. Nasipuri, Stereochemistry of Organic Compouds
N.B. Experiments may be added to or omitted from the above list if necessary.
Books Recommended:
1. A. I. Vogel, A Text book of Practical Organic Chemistry
2. Clark, Experimental Organic Chemistry
3. Louis F. Fieser, Kenneth L. Williamson, Organic Experiments, D.C. Health & Company Lexington,
Massachusetts, Toronto, 4th edition.
4. A. I.Vogel, Elementary Practical Organic Chemistry (Part 2)
5. Text book of practical organic chemistry, Vogels’s, ELBS with Longman, 5th edition.
Methods of determining reaction mechanisms : Meaning of reaction mechanism, Energy profile, Identification of
products, Possible intermediates and their trapping, Isotopic labelling, Stereochemical studies, Detection of
intermediates. Kinetic study.
Broad concepts of the mechanism of the following classes of organic reactions:
Substitution reactions: Nucleophilic substitution reaction in aliphatic system, duality of mechanism. SN1 and SN2
reaction mechanism, factors affecting the mechanism of substitution reaction. Aromatic substitution both
nucleophilic and electrophilic, Stereochemistry. Neighbouring group participation
Addition reactions: Mechanism of addition to >C = C<, >C = O bonds, conjugated system like conjugative diene
and conjugated unsaturated carbonyl compounds, their stereochemistry, Kinetics. Diels-Alder reaction, Grignard
reagents. Canizzaro reaction.
Elimination reactions: Elimination -inlight of addition and substitution; E1, E2 and E1CB mechanisms. Orientation
in elimination reactions, Competition between elimination and substitution, Factors affecting the elimination
reaction.
Carbonions and enolisations: Ionisation of CH bonds and prototrophy. Tautomerism: Halogenation of Ketones.
Reimer- Tiemann reaction. Kneovengel reaction. Aldol reactions, Perkin reaction. Benzoin condensation, Wittig
reaction, Micheal aand Mannich reactions with all mechanistic details.
Books Recommended:
1. Morrison and Boyd, Organic Chemistry.
2. Solomons, Organic Chemistry.
3. Peter Sykes, Reaction mechanism in Organic Chemistry.
4. S. T. Pine, Organic Chemistry
CHE-200 ORAL
1 Credit
Oral on 1st and 2nd semester courses of different branches of chemistry.
Page 11 of 22
12
Phase equilibria: Phase rule and its applications: one component systems like water, sulfur and phosphorus. Two
component system: miscible solid-liquid systems of two components with and without compound formation. Binary
liquid systems: Duhem-Mergules equation. Distillation of completely miscible liquid mixtures, fractional
distillation, Azeotropic mixtures. Phase diagrams for partially miscible liquid systems, salt and water system. Solid-
liquid-vapour equilibria in systems such as salt and water; efflorescence and deliquescence, vapour pressure of
saturated solutions. Principle of the phase diagram for three component system.
Surface Chemistry: Adsorption: Different types of adsorption isotherms. Theories of Langmuir and other
adsorption isotherm for gas-solid system. Adsorption at surface of solution: Gibbs adsorption equation, Surfactants,
surface films. Adsorption by solids from solution.
Colloids: General methods of preparation, classification and general properties of colloids. Electrokinetic
phenomena: Double layer structure, Zeta potential, electrophoresis and electroosmosis. Properties of gels, Colloidal
electrolytes. Preparation, types, specific properties and stability of emulsions. Micelles formation and critical
micelle concentration, Uses of colloids and emulsions.
Books Recommended:
1. P.W. Atkins, Physical Chemistry
2. G.M. Barrow, Physical Chemistry
3. Maron and Lando, Fundamentals of Physical Chemistry
4. Glasstone and Lewis, Text book of Physical Chemsitry
5. Jirgensen and Stranmens, Colloid Chemistry
6. A. Findlay, Phase rule
7. S. Glasstone, Physical Chemistry.
8. Adamson, Physical Chemistry of Surfaces
9. Alberty, Physical chemistry.
Books Recommended:
1. P. K. Atkins, Physical Chemistry
2. G. M. Barrow, Introduction to molecular spectra
3. Banwell, Fundamental of molecular spectroscopy
4. William and Flaeming, Spectroscopic methods in organic Chemistry
5. P.W. Atkins, Spectroscopy
6. C. N. Rao, UV-VIS Spectroscopy
7. L. M. Jackmann, Applications of NMR - spectroscopy
8. Baumann, Absorption spectroscopy
9. Pavia, Spectroscopy in Chemical Analysis
10. K. Nakanishi, Infra red and absorption spectroscopy
11. Silverstein, Bassior & Marril, Spectrometric identification of organic compounds.
Introduction of coordination chemistry: Definition of terms, different types ligands, template effect, naming of
the complexes. Stereochemistry of the coordination compounds: Structure and examples of different coordination
number, stereochemistry nonrigid and fluxional molecules. Isomerism in coordination compounds: Geometrical
isomerism, Optical isomerism, ionization isomerism, linkage isomerism, etc. determination of cis-trans isomers.
Bonding of coordination compounds: Werner’s theory, Sidwick’s theory, valence bond theory, limitations of these
theories.
Crystal field theory : Basic principle, splitting of d-orbital in octahedral, tetrahedral, tetragonal and square
planar symmetries, crystal field stabilization energy, high spin and low spin complexes, pairing energies,
factors influencing ligand field splitting, spectrochemical series, measurement of 1ODq, Jahn-Teller effects,
limitations of Jahn-Teller theory, magnetic properties, thermodynamic effects, absorption spectra, limitations of
CFT. Molecular orbital theory : Basic principle, s-bonding and p-bonding in octahedral, complexes, effects of
p-bonding, MOT in tetrahedral and square planar complexes, limitations of MOT, comparison of different
approaches to bonding in coordination compounds .
Page 12 of 22
13
Books Recommended:
1. S. Z. Haider, Advanced Inorganic Chemistry.
2. James E. Huheey, Inorganic Chemistry.
3. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry.
4. Shriver, Atkins and langford, Inorganic Chemistry.
5. Douglas. McDaniels and Alexander, Concepts and Models of Inorganic Chemistry.
6. Sharpe, Inorganic Chemistry.
7. W. L. Jolly, Inorganic Chemistry
Introduction: Discovery of radioactivity, statistical approach of radioactivity, radioactive decay and growth,
naturally occuring radioactive substance, type of radioactive decay, average and half life of radioactive elements,
nuclear structure, mass and energy, nuclear binding energy etc. Nuclear shell model, Nuclear reaction: Nature of
nuclear reaction, energetics of nuclear reaction, cross section, theory of nuclear reaction, types of reactions, fission
& fusion reaction etc. Radiation detections: Ionization current measurement, ionization chamber; multificative ion-
collection, G.M. counter, Scintillation counter; health physics instruments. Radio isotopes and their uses:
Production and separation of radio isotopes, the Szilard - Chalmers reaction, isotope dilution analysis, activation
analysis, tracer technique for reaction kinetics and for industrial, agricultural and medical uses. Nuclear energy:
Nuclear fuels, outline different types of nuclear reactors, fuel reprocessing etc. Introduction to radiation hazards
and safety measures.
Book recommended:
1. Navratil, O, etal, Nuclear Chemistry
2. Friedleander and Kennedy, Nuclear and Radiochemistry.
3. Choppin, Nuclear and Radioactivity
4. Williams, Principles of nuclear Chemistry.
5. L. Yaffe, Nuclear Chemistry Vol. I & II
6. Harvey, Introduction to Nuclear Physics and Chemistry.
Books Recommended:
1. S. Z. Haider, Advanced Inorganic Chemistry
2. Cotton, Wilkinson and Gaus, Basic Inorganic Chemistry
3. Cotton and Wilkinson, Advanced Inorganic Chemistry
4. James E. Huheey, Inorganic Chemistry
5. Douglas, McDaniels and Alexander, Concepts and Models of Inorganic Chemistry
6. W. L. Jolly, Inorganic Chemistry
7. P. Poweell, Principles of Organometallic Chemistry
8.M. Bochmann, Organometallics 1, Oxford university press ,1994
9.M. Bochmann, Organometallics 2, Oxford university press,1994
10. Ch. Elschenbroich, A. Salzer ,Organometallics ; A concise introduction, VCH, 1992
11. D.F. Schriver, P.W. Atkins, C.H. Langford , Inorganic chemistry, OUP, 1994
Books Recommended:
Page 13 of 22
14
1. Synthetic and natural polymers: Introduction to natural and synthetic polymers; Difference between polymers
and macromolecules: Molecular weight and size of polymers; Number average molecular weight, Weight average,
Z-average and viscosity average molecular weight; Polymerization: Types of polymerizations, Mechanism and
kinetics of (a) step reaction polymerization, (b) radical chain (addition) polymerization and (c) ionic polymerization;
Preparation of synthetic polymers using Coordination polymerization; Preparation with mechanism, properties and
uses of phenol-formaldehyde resins, melamine-formaldehyde resins, urea formaldehyde resins and epoxy resins;
Some naturally occuring polymers e.g. rubber, cellulose, starch, wool, silk, etc.
2. Molecular Rearrangements: Introduction: Definition, types of molecular rearrangement, migrating group,
migration terminus, migration origin, migration ampplitute, etc.
Wagner-Meerwein rearrangement, Pinacol-semipinacol rearrangement and stereochemistry, Wolff rearrangement,
Hofmann rearrangement, Beckmann rearrangement, Bayer Villiger rearrangement, Favorskii rearrangement,
Benzilic acid rearrangement, Wittig and Meisenheimer rearrangements.
Books Recommended:
Books Recommended:
1. H. T. Clarke, B. Haynes, E. C. Brick, G. C. Shone, E. Arnold, Hand book of Organic Analysis, Qualitative
and Quantitative, 5th edition
2. R. L. Shriner, R. C. Fuson and D. Y. Curtin, Systematic Identification of Organic Compounds, John Wiley
Sons, Inc. New York, London, Sydney, 5th edition
3. Vogel’s Text Book of Practical Organic Chemistry, 5th edition, ELBS with Longman.
Introduction to natural products: Studies on some classes of natural products: Terpenoids:- The essential oils.
Classification of terpenoids, isoprene rule, isolation and purification, general methods of determining the structure
of terpenoids. Detailed study of some monoterpenoids: Myrcene, citral, a-terpenoid. Steroids: Introduction to
steroids e.g. cholesterol (degradative and synthetic studies are not included). Alkaloids: Occurance, Classification,
extraction and purification of alkaloids, general methods of determining structure, detailed study of atropine,
nicotine and papaverine. Carbohydrates: Definition, Classification, The D-family of aldoses, ketoses, amino
sugars, uronic acids. Reactions of monosaccharides e.g. glucose. Cyclic structure: anomers, glycosides.
Conformations, configuration of D (+) -glucose. Introduction to disaccharides e.g. Maltose, Lactose, Sucrose.
Amino acids and proteins: Classification, synthesis and physicochemical properties of amino acids. Analysis of
amino acids. Peptide synthesis, Introduction to protein. Purines and Nuclic acids: Isolation and purification. Purine
and Pyrimidine structure and their derivatives. Uric acid. Nucleic acids and their structure.
Books Recommended:
1. Finar, Organic Chemistry Vol. 2.
2. Agarwal, Chemistry of Organic Natural Products Vol. I & II
Introduction: The scope of analytical chemistry. The types of analytical methods. Trends in development of
analytical methods. Different ways of expression of concentration. Safety in the laboratory and hazards associated
with chemicals. Error in the chemical analysis and sampling: Determinate and indeterminate error, normal
distribution of error, data treatment, potential sources of error, sampling, sample size, collecting the sample.
Instrumental quantitative analysis: Working curve, blank solution, standard-addition technique, curve fitting.
Titrimetric methods of analysis: Definition, classification. (a) Complexometric titration: Chelating agents,
stability of metal chelates, metal indicators, effect of pH, masking agents and their roles, EDTA, method of titration,
titration curve, application. (b) Precipitation titration: Effects of acidity on the solubility of precipitates, effect of
Page 14 of 22
15
complexation on solubility, titration curve, titration process, indicators, application. (c) Redox titration: Principle,
process, titration curve indicators, application. Gravimetry and thermogravimetry: Precipitation equilibria, unit
operation in gravimetric analysis and calculation. TGA, DTA, DSC, & DTG analysis of a typical sample. Solvent
extraction: Distribution coefficient, distribution ratio, percent of extraction, solvent extraction of metal and metal
chelates, successive extraction. Analytical Spectroscopy: Origin of spectra. The absorption spectrum. Beer-
Lambert law. Emission spectrometry: Flame emission and plasma emission spectrometry. Atomic absorption
spectrometry: Principle, Instrumentation, Interference, Sample preparation, Electrothermal atomiser. Flameless
mercury determination. UV spectrophotometry: Principle, instrumentation, qualitative and quantitative analysis by
UV, simultaneous determination in a mixture by UV. Flurometry: Principle, instrumentation and application.
Books Recommended:
1. G. D. Christian, John Wiley & Sons, Analytical chemistry (4th edn.)
2. Braun, Introduction to chemical analysis, McGraw Hill International.
3. Ewing, Instrumental methods of chemical analysis, Mc graw Hill International.
4. Vogel, Inorganic quantitative analysis (4th edn.)
5. Pecsok and Shields, Modern methods of chemical analysis, John Wiley & Sons, (2nd edn.)
6. Willard, Muritt, Dean and Settle, Instrumental methods of analysis, (6th edn.)
7. Skoog & West, Fundamental of analytical chemistry.
8. Fifield & Kealey , Principles & practice of analytical chemistry.
9.Skoog, West & Hollar, Fundamental of analytical chemistry(6th edition)
Introduction: Concept and scope of environmental chemistry, environmental segments, environmental and
ecological factors. Atmosphere: Composition of atmosphere, atmosphereric structure, green house effect- cause and
effect, depletion of ozone in stratosphere- cause and effects, Antrartic ozone hole. Air pollution: Classification of
air pollutants, sources, sink and effects and control of CO, NO X, SOX, hydrocarbons, flurides, asbestos and
particulate matter, photochemical smog, acid rain- causes and effect, airborne lead the effect and control,
atmospheric stability and temperature inversions, air pollution from major industrial operations in Bangladesh,
Aquatic humic substances. Water pollution: Composition of river, sea and underground water, criteria of water
quality, types of water pollutants and their effects, pollution of natural water by plant nutrients, Trace elements in
water- sources, toxicity and measures, eutrophication, ecological obesity, chemistry and ecology of inorganic
fertilizers, soap and detergents, pestisides- biodegradation of pestisides and their toxicity, trace elements (Hg, Pb,
As) in water- sources and toxicity. Soil pollution : Soil pollutants, sources, effect on soil, impact in chain.
Books Recommended:
1. A. K. Dey, Environmental Chemistry.
2. R. W. Raiswell, Environmental Chemistry.
3. Moore & Moore, Environmental Chemistry.
4. S. E. Manahan, Environmental Chemistry
5. H. J. M. Bowen, Environmental Chemistry Vols. I. - III.
6. Review articles from Chemistry in Britain, Science.
7.J. L. Pyle, Chemistry & the Technological Backlash
8. Nyle C. Brady, The nature and properties of soil.
Introduction: Fundamental considerations in the development of chemical industry, feasibility survey of a chemical
process, Unit operation and unit processes: Definition, principles of unit process and operations, relevant
equipment and examples of their uses in common industries, Cement Industry: Raw materials, Portland cement
manufacture, types of Portland cement, theory of setting and hardening of cement, different types of cement,
characteristic of good cement, cement factory in Bangladesh. Ceramic Industry: Definition, types of ceramic
products, basic raw materials, white wares, manufactures of porcelain, chemical conversion including basic ceramic
industry, heavy clay products, manufacture of refractory, enamels, ceramic industries in Bangladesh. Glass
industry: Raw materials, methods of manufacture, properties and uses of different types of glasses, special glasses.
Fertilizer industries: Definition, plant nutrients and their functions, nitrogen fixation, manufacture of ammonium
nitrate, calcium phosphate, ammonium phosphate, normal super phosphate (NSP), triple super phosphate (TSP),
potassium compounds, manufacture of urea from natural gas, mixed fertilizer, fertilizer industries in Bangladesh.
Food Processing Industries: Food classification, Basic principle of food processing, Milk and dairy products,
Fruits and vegetables, Confectionary, Beverages, Meat & fish processing etc.; Food additives, food color, flavor,
preservatives, stabilizer, thickener, etc, Safety consideration of food additives & Environmental aspects, Food
adulteration & its toxic effect, Basic instrumentation in food processing industries. Soap and detergents and
cosmetics: Raw materials, fat splitting, manufacturing of laundry and toilet soaps, recovery and refining of glycerin,
Page 15 of 22
16
composition of different types of soaps. Detergents: definition, classification and their manufacture, builders,
additives, biodegradability of detergents, comparison of soap and detergents, cleaning action of soap and detergent.
Pulp, paper and rayon industries: Natural source of cellulose, different process for the manufacture of pulp,
recovery of chemicals from waste cooking liquor, manufacture of paper board, rayon, cellulose acetate and cellulose
nitrate. Pulp and paper industries in Bangladesh. Sugar industries: Manufacture of cane sugar, refining of raw
sugar, production of sugar from sugar beet, and sugar industry in Bangladesh. Paints and varnishes: Constituents
of paints, varnishes, lacquers and enamels and their functions, factors influencing satisfactory performance of
surface coating, properties of pigments, manufacture of paints and varnish, difference between paints and varnishes.
Petroleum industry: Definition, origin, composition and classification, refining and distillation of petroleum,
cracking of petroleum, motor and aviation fuels, natural gasoline, aviation gasoline, octane number, cetane number,
production of high octane, alkylation, polymerization, isomerization and reforming. Oils, fats and waxes: Sources
of fats, oils and waxes, extraction, refining, bleaching, decolorization of fats and oil, production of vegetable oil
(vanaspati), essential oil and their uses, saponication number and iodine value.
Books Recommended:
1. Shreve, Chemical Process Industries.
2. Roger’s, Manual for Industrial Chemistry.
3. J.A. Kent, Regels’ Hand Book of Industrial Chemistry.
4. Liegue, Engineering materials.
5. Martins, Industrial Chemistry (Vol. I, II & III)
6. R. K. Das, Industrial Chemistry (Part I & II).
7. Othmer and Klerk, Encyclopedia of Chemical Technology
Computing and Information Technology for Chemistry Introduction to Windows and MS-DOS. Introduction to
Microsoft Word, Writing chemistry texts involving chemical formulae, symbols.
Advance word processing-Tabs, tables, use of the equation editor in chemistry
Two dimensional chemical structure drawing using Chem-Window.
Microsoft Excel/ Origin-Chemical spreadsheets ( use of function wizard, formulae) and graphs in chemistry ( line
graphs and scatter plots). Data analysis using sigma plot, kaleida graphs.
Databases using Access, Use PowerPoint., Molecular Structure Drawing Using Chewin 2D and 3D, Use of Internet.
Computer Simulation; modeling of a chemical process.
Statistical analysis of Experimental data using computer programming.
During the duration of the course, use of new software will be encouraged depending on availability.
Suggested Reading :
1. Microsoft Office 97/2000, Mahbubur Rahman,
2. SAMS Teach Yourself Microsoft Office 2000 in 21 days, Laurie Ulrich Techmedia, New Delli-2
3. Windows 98, Burce, A. Hallberg & Joe Casad, Techmedia, 20 Ansari Road New Delli-2
Assignment of report writing (about 800 words) on topics given in 1st and 2nd semester courses of different
branches of chemistry. The assignments will be submitted to respective advisor and evaluated by the examination
committee based on 10 minutes presentation by the student.
A. Quantum Chemistry :
1. Introduction and principles of quantum Chemistry: Failure of the Classical mechanics, Black body radiation,
Photoelectric effect. Compton effect, Heat capacity of solid. Planck’s quantum theory. Explanation of characteristics
of black body. Uncertainty principle. Schrödinger wave equation. Wave function and their significance.
2.Techniques and application of quantum theory: Solution of Schrödinger’s equation for a free particle and
particle in a one and three dimensional box, Calculation of energy and wave function. Degeneracy, quantization of
energy.
3. Postulates of quantum mechanics and their applications. Eigen value and eigenfunction, normalization and
orthogonality. Commutation of operators, Hermitian operators, reality and orthogonality of hermitian operators.
4. Schrödinger wave equation for the hydrogen atom in a spherical polar coordinates. Separation of the complete wave
equation into the Q, R and f-equation and their solutions. Significance of quantum numbers and energy levels. Angular
wave function. concept of different types of s, p and d-orbitals from angular wavefunction. Radial distribution function
and calculation of radial distribution functions for (n + 1)s and (n + 1)p orbitals.
5. Approximate solutions: Perturbation theory, first order perturbation energy. Application of the first order
perturbation theory to the normal helium atom. Variation theory, basis of the variation theory and application of
variational technique to normal helium atom.
Page 16 of 22
17
6. Wave function for many electron atoms. Self consistent field method. Application of SCF to many electron systems.
B. Statistical Mechanics:
1. Quantum Statistics: Stirlings approximation, Indistinguishability of similar particles, Bose- Einstein, Fermi-Dirac
and Maxwell Boltzmann statistics and the range of their application, comparison of three statistics, relationship between
b & T.
2. Partition functions: Separation of partition functions, translational partition function, rotational partition function,
vibrational partition function, electronic and nuclear partition functions. significance of the partition functions.
3. Statistical thermodynamics : Entropy and probability. Entropy and number of eigen states. Relationship between
partition function and thermodynamic functions. The entropy of mixing.
Books Recommended :
1. Introduction : Scope of solid state chemistry and Chemical crystallography , crystalline and amorphous
solids, liquid crystals , Isomorphism and polymorphism.
2. Crystal Structure : Types of Crystals, Crystal system , Unit cell, crystal lattice, Bravis lattice, Miller indices ,
Brilluin zone, Reciprocal lattice, Symmetry operation and symmetry elements, point groups, space groups, close
pack structures-- cubic and hexagonal, some important structure types-- sodium chloride, Zinc blend, Diamond ,
Wurtzite, Pervoskite and Spinel structure .
3. Diffraction Techniques : X-ray Diffraction , Nature and production of X-ray , Bragg’s law. The Powder
method-- theory , technique and application . Single crystal X-ray diffraction . Principle of Neutrron and electron
diffraction.
4. Crystal Defects : Perfect and imperfect crystals. Types of crystal defects, thermodynamics and equilibrium
concentration of intrinsic defects. creation and properties of color centers , influence of defects on physical
properties of solids , non-stoichiometry, Solid solution.
5. Electrical properties of solid : Band theory of solid , Band structure of metal. Semiconductor and Insulator ,
intrinsic and impurity semiconductors , Hall effect , transistors, superconductivity.
6. Magnetic and optical properties : Magnetic properties of metals. optical properties : Luminescene, Lasers ,
Photocopying process, photoconductivity.
7. Reactions of solid : Solids-gas, solid-liquid and solid-solid reactions, Kinetics of thermal decomposition
reaction, factors influencing reactivity in solids , photographic process.
8.Symmetry elements, Symmetry operation: Single molecule, Crystalline system Point group: Schoenfies
system, International system ( Harmann-Manquin system ) Point Group and Molecular Symmetry : Group with
high and low symmetry, N fold rotational axis, Dehydral groups, Representation of point group and character table.
Use of point group: Optical activity , Dipole moment, IR and Raman spectroscopy bonding
screw axis, Glide plane , Space group ,
9. Diffraction Techniques : X-ray diffraction , Nature and Production of X -ray, Bragg`s law . The Powder Method-
Theory, Technique and Application . Single Crystal X-ray diffraction. Principle of neutron and electron diffraction .
Book Recommended :
1. Introduction to solids L. V. Azaroff.
2. Crystalllography and its application L. S. Dent & Glasser
3. Elemnts of X- ray diffraction B. D. Cullity
4. Physical methods in Chemistry R. S. Drago
5. Solid state Chemistry & its
application A. R. West
6. Solid state chemistry N. B.Hany
7. Solid state Chemistry A. K. Galway
8. Basic Solid state Chemistry A. R. West
9. An introduction to crystal chemistry R. C. Evans
10. Selected topics from Physical
Chemistry P. W. Atkins.
11. Concepts and Models of Inorganic Chemistry Douglas, Mc Daniel, Alexander.
12. Inorganic Chemistry Huheey , Keiter , Keiter
1. Electronic Spectra of metal complexes : Term symbols, selection rules, Hund's rule and ground state term,
splitting of electronic energy levels and spectroscopic states, R-S coupling, knowledge on microstates, Tansbe-
Sugano diagram, interpretation of UV-vis spectra, spectra of d1 , d2 , d5 , d8 and d9 complexes, charge transfer
spectra.
2. Stability of coordination compounds: Thermodynamics and kinetic stability, factors influencing the stability of
Page 17 of 22
18
complexes.
3. Reaction mechanism : Types of substitution reactions, introduction to ligand substitution reactions--lability and
inertness, thermodynamic and kinetic stability, substitution reaction in octahedral compleses-- lability and d-electron
configuration, types of mechanism of ligand substitution reactions, acid hydrolysis and base hydrolysis reaction,
effect of charge, effect of leaving group, nonleaving group, solvents, steric effect, etc. on reaction rates, substitution
without breaking the metal- ligand bond, recimization reaction.
Ligand substitution reaction on square planar complexes--general features, significance of the rate law, effect on
rates of entering and leaving ligands and solvents, steric effects of nonleaving ligand, trans effect, theories of trans
effect. Redox reactions-- inner and outer sphere reactions and their mechanism, theory of redox reactions,
Photochemical reactions, d-d and charge transfer reactions.
Books Recommended :
1. Essential elements: General aspects, availability of elements, roles of essential trace metal ion - Na+, K+, Ca2+,
Mg2+, Co2+, etc. and non metals, ion pumps.
2. Functional value of the Chemical elements in Biological Systems: Major chemical properties of chemicals in
aqueous solution, biochemical functions of the chemical elements, the living process, chemical flow in biology.
3. Metalloporphyrins, photosynthesis and respiration : Porphyrin ring system, chlorophyll, cytochromes,
oxygen transport and storage, oxygen carriers - model compounds, Iron porphyrins, hemoglobin and myoglobin
functions.
4. Biological chemistry of Iron: Introduction to iron biological chemistry, non haem iron - iron uptake, non-
haem iron proteins, rubredoxins and ferrodoxins, Haem iron - properties of isolated haem units, haem protein
functions - electron transfer, oxidases and dioxygenases.
5. Metalloenzymes: Non redox metalloenzymes, peroxidase and catalase, the role of copper.
6. Principle of bioinorganic medicine: Inorganic drugs, antiotic and related compounds, chelate therapy.
Books Recommended :
Kinetics and energetics of organic reactions : Orders of reactions, reversible reactions, consecutive reactions (the
steady state approximation), parallel reaction. Mechanistic implications from rate laws. The transition state theory:
Energy of activation , Entropy of activation Kinetic and thermodynamic controlled reactions. Influence of solvents.
Salt effects. Isotope effects.
Structure and reactivity: Quantitative treatment, The Hammett equation, Significance of substant constant, s and
reaction constant, p , Modification of substant constant ( s°, s+, s- ), Separation of inductive resonance, and steric
effects, Taft equation.
Photochemsitry : Principles of photochemistry , Excited states, Photochemical Processes, Energy transfer and
photosensitization. Photochemical reaction : Photoreduction, Photolysis, Cycloaddition, Isomerization and
rearrangement. Chemiluminescence and bioluminescence.
Free radical Chemistry : Formation of free radicals, Shape and stability of free radicals, Detection of free
radicals, Free radical reactions: Fragmentation, substitution, addition, oxidation, reduction, rearrangement etc.
propagation, termination, reactivity, stereochemistry and detection of free radicals. Fragmentation,
substitution, addition, oxidation and reduction reaction. Free radical rearrangement.
Molecular Orbitals : Molecular Orbital Theory , Wave equations LCAO methods, Bonding and antibonding
orbitals, Electronic configurations, Aromatic character.
Orbital Symmetry : Orbital symmetry and the chemical reaction, Electrocyclic, Cycloaddition and Sigmatropic
reactions.
Books Recommended :
Page 18 of 22
19
Books Recommended :
1. Oxidation reaction: Oxidation of hydrocarbon, alcohols. Allylic oxidation; Oxidation with peroxyacids,
periodate, lead tetraacetato and SeO2.
2. Reduction reaction : Catalytic hydrogenations , metal hydride reduction, reduction with dissolving metals.
3. Alkylation of active methylene compounds .
4. Synthesis involving interconversion and protection of functional groups like C=C, -OH,-CHO, C=O,
-COOH, -CO2R etc.
5. Organometallic Compounds : Preparation, structure, properties, reactions and applications of Grignard reagents,
alkylated compounds of alkali groups (e.g., Li, Na), Organo-Copper compounds, Organozinc compounds,
Organoaluminium compounds.
6. Design of Organic Synthesis : Design of a synthesis, Initial consideration of the retrosynthetic approach, starting
materials, yield and reaction; Synthesis of monofunctional and bifunctional compounds.
7. Name reactions: Oppenheimer, Meerwein-Pondoff-Varley reduction, Clemension & Wolf-kishner reduction
reaction.
Books Recommended :
Page 19 of 22
20
Books Recommended :
1. William and Flemming (McGraw Hill) Spectroscopy of Organic Compounds.
2. Dayer (Prentice Hall of India) Application of Absorption Spectroscopy Organic Compounds .
3. D. Pavia Lampen and Kniz Introduction to Spectroscopy.
4. Silverstien, Bassien and Morril Spectrometric Identification of Organic Compounds
5. B. George , P. Mclntyre Infrared spectroscopy.
6. Andrew E Derome Modern NMR technique for Chemistry Research
7. Gurdeep Chatwal , S Anna Spectroscopy (Molecular and atomic )
8. C. N. Benwell Fundamental of molecular spectroscopy.
9. William Kemp Qualitative Organic Analysis
10. Nakamoto Infrared Spectroscopy.
1. Potentiometry : Theory, Potentiometry and standard potentials, liquid junction potentials. Theory of ion-selective
electrodes, Apparatus for potentiometry, quantitative analysis with ion-selective electrodes.
2. Fundamental principle of polarography : Principle, current - voltage relationship, the half wave potential,
characteristics of the dropping mercury electrode (DME), Polarographic currents, factor affecting diffusion
current, polarographic maxima, Oxygen interference, application.
3. Modern voltametric techniques : DC and alternating current polarography pulse polarography, Derivative pulse
polarography, are polarography, first linear, cyclic voltametry, Anodic stripping voltametry.
4. Amperomeic Titration Methods : Definition, illustration with examples, Methodology, successive titration
comparison with other titration method.
5. Coulometric methods : Principles, instrumentation, Applications of controlled potential coulometry. Constant current
coulometry. Primary coulometric titration, secondary coulometric titration.
6. Electrogravimetry : Constant current electrolysis, separation with controlled electrode potentials. Composition quite
electrolyte potential buffers. Physical characteristics of metal deposits.
Books Recommended :
1. Modern Electrochemistry Bockris & Reddy
2. Principles and application of electrochemistry D. R. Crow
3. Electrochemical methods Bard & Faulkner
4. Selected topics from physical Chemistry P. W. Atkins
5. Analytical Chemistry Skoog
6. Instrumental Methods of Analytical Chemistry Willard, Merit, Dean & Jones
7. Analytical Chemistry R.V. Dilts
8. Principles and Practice of Analytical Chemistry P.F.W. Fifield & D. Kraley
9. Quantitative Analysis R.A. Day Jr. & A.L. Underwod
Requisite number of experiments are to be chosen on the basis of available facilities. Some of the experiments are
indicated below.
Page 20 of 22
21
Requisite number of experiments are to be chosen on the basis of available facilities, Some of the experiments are
indicated below.
1. Determination of equilibrium constant of reaction by the measurement of e.m.f. and by titration.
2. Characterization of polymers by measurements of destiny, viscosity. I spectrum and by DTA
3. Determination of excess surface concentration and thermodynamic parameters by measurement of surface and
interfacial tensions of different liquid paints.
4. Determination of the industry of a UV source and study of various photochemical reactions.
5. Determination of Hait parameters of different types of semiconductors.
6. Study of the electronic phenomena.
7. Study of adsorption of gases of solid surface.
8. Preparation of colloids and study of their catalytic properties.
9. Preparation and characterization of carbonatotraammniceobalt(III) [ Co(NH3)4Co3]NO3 and chloropenta ammine
cobalt(III) chloride [ Co(NH3)5CH]Cl2
10. Aquation of [ Co(NH3)5CI]
11. Preparation of hexamineiron(III) chloride [ Fe(NH3)6]CI3 or hexaammine cobalt(III) chloride and study of their
magnetic properties.
12. Determination of composition of the complex ion by job’s method.
13. Preparation of 1-10 phenanthrolin complex of Co(III) and characterization by UV-visible spectroscopy.
14. Quantitative determination of metal ions by polarographic method.
15. Synthesis Multistep.
17. Quantitative estimation: Estimation of functional groups by volumetric analysis.
18. Determination of ascorbic acid.
19. Drug Analysis.
20. Estimation of reducing end groups and degree of polymerisation of cellulose samples.
21. Fermentation of starch.
22. Project experiments to be announced at the beginning of the course.
23. Ion-exchange chromatography.
24. Gel-Filtration.
25. Paper chromatography. One dimensional, aminoacid/carbohydrates. Two way separation of aminoasids.
26. Solvent extraction and purification of macromolecules.
27. Spectrophotometry : Metals biologically active compounds
28. Experiments based on IR- spectroscopy.
29. Combined method. TLC , column,
30. Project experiments to be announced at the begining of the course.
Page 21 of 22
22
Assignment of report writing (about 1000 words) on topics given in 1st and 2nd semester courses of different
branches of chemistry. The assignments will be submitted to respective advisor and evaluated by the examination
committee based on 10 minutes presentation by the student.
Page 22 of 22