M4-12 Re64276 2016-04 PDF
M4-12 Re64276 2016-04 PDF
M4-12
RE 64276
Edition: 04.2016
Replaces: 05.2015
▶▶ Size 12
▶▶ Series 2X
▶▶ Nominal pressure
–– on pump side 400 bar
–– on consumer side 420 bar
▶▶ Maximum flow
–– on pump side 300 l/min
–– 130 l/min on the consumer side with pressure
compensator and load holding function
Features Contents
▶▶ Flow control independent of load pressure Functional description 2
–– Open center for fixed pump Technical Data 3
–– Closed center for variable pump Modular system 5
▶▶ Sandwich plate design with up to 20 directional valves Ordering code 8
▶▶ Mono block with 1 axis, expandable with max. 9 directional Order examples 13
valves Inlet plates 17
▶▶ Type of actuation: mechanical, hydraulic, electrohydraulic Mono block 20
(switching, proportional or with on-board electronics) Directional valves 21
▶▶ Pressure limitation Types of actuation 28
–– Inlet plate: pilot operated pressure valves of large Secondary valves 31
nominal width Options 32
–– Directional valve/consumer ports: compact shock Available housing variants 33
valves with feed function End plates 34
▶▶ LS pressure limitation Dimensions 36
–– Adjustable per consumer port On-board electronics: Electronic pilot module (EPM) 49
–– External pressure setting per consumer port possible Accessories 51
–– Electro-proportional per section M4 configurator 53
Related documents 54
Fields of application
▶▶ Truck applications ▶▶ Construction machines
▶▶ Drilling equipment ▶▶ Aerial work platforms
▶▶ Forestry machinery ▶▶ Heavy duty vehicles
▶▶ High-capacity forklifts ▶▶ Marine engineering
and teleforklifts ▶▶ Mining applications
▶▶ Municipal vehicles ▶▶ Stationary applications
▶▶ Cranes
Functional description
4 2 7 6 5
P X Y LS T
B
9 5 6
12
A B
MA
„b“ MB
A
10 7 A B
T T 7 b
„a“ X
Y a P T
P
LSP
13 4 MA MB 8 1 3 2 11 9 14
8 10 3
Technical Data
General
Weight Inlet plate P SP J SJ JZ JK
kg 6 11.4 4.3 11 8.4 11
Mono block PM JM
kg 5.6 3.8
Directional valve M H W CBA
kg 4.9 4.2 4.5 4.8
Hand lever surplus weight kg 0.6
End plate LA LAPT LA… LA… … LZ LZPT
kg 3 4.3 3.8 3.8 2.8 4.4
LU LU… L8 TI
kg 3.5 4 4.5 6.3
Installation position Ideally horizontal to the spool axis.
For versions with spool position sensor, horizontal to
the spool axis or vertical, with the sensor cable on the
bottom.
Consumer line connections Pipe thread as per ISO 228/1 (inches),
ISO 11926-1 (UNF) or JIS B 2351-1 (on request)
Ambient temperature range θ °C -20 to 80 (−40° to +100°C on request)
Priming (standard) One-coat paint RAL 5010 (more on request)
Surface protection according to Standard priming h 96
DIN EN 60068-2-11 Special painting h 480
Painting for SO-038 h 1000
Mechanical
Actuating force on Mechanically operated N < 20
the hand lever Mechanical override (with parallel N < 70
(encapsulated) hydraulic actuation)
Mechanical override (with parallel N < 50
electrohydraulic actuation)
Actuating force in Tongue N < 250
spool axis Detent with tongue N < 350
(not encapsulated)
Hydraulic
Maximum working pressure at port P pmax bar 400 (420 on request)
A, B pmax bar 420
LS pmax bar 350
T pmax bar 30 (20 with mechanical actuation only)
Y pmax bar Must be routed to reservoir without pressure
Maximum pilot pressure at port a, b pSt bar 35
X pSt bar 35
Pilot pressure range Hydraulic pSt bar 8.5 to 22.5
Electrohydraulic pSt bar 6.5 to 17.2
Required differential pressure Version S, C p bar 18
control on the control block
Recommended hydraulic pilot controls TH6 control curve 97, see data sheet 64552 or 64555
Hydraulic
Required pump controller Controller without LS connection to reservoir,
e.g., DFR1, DRS
Maximum primary pressure limitation p bar 370 (set at the factory according to ordering code),
min. 20 bar above the pressure cut-off value of the pump
LS pressure limitation p bar 50 to 350
(set at the factory according to ordering code)
The highest reduce response pressure of the valve
block LS pressure relief valves set at the factory must
be at least 20 bar lower than the pressure cut-off value
of the pump.
Maximum flow Inlet plate P P … P100 SP J SJ
Port P qVmax l/min 150 100 120 150 150
JZ JK PM JM
qVmax l/min 200 300 130 150
Directional valve
Port A, B qVmax l/min 130 with pressure compensator and load holding function
End plate LAPT LZPT
Port P qVmax l/min 100 100
Hydraulic fluid Mineral oil (HL, HLP) according to DIN 51524, HEES
(synthetic ester) according to ISO 15380 and other
hydraulic fluids on request
Hydraulic fluid temperature range θ °C -20 to 80
-40 to 100 on request
Viscosity range ν mm²/s 10 to 380
Maximum admissible degree of contamination of the Class 20/18/15, we recommend a filter with a minimum
hydraulic fluid retention rate of β10 ≥ 75
Cleanliness level as per ISO 4406 (c)
Electric
Electrical pilot control valve FTWE2K...; see data sheet 580071)
FTDRE2K...; see data sheet 580321)
Recommended amplifier RA 1-0/10; 1 axis, see data sheet 95230
(other actuating options on request) RA 2-1/10; 4 to 6 axes, see data sheet 95230
RC control units, see data sheet 95200
Connector version 1 and 3 Junior Timer, 2-pin (AMP)
8 and 9 DT04-2P (Deutsch)
Protection rating as per VDE 0470-1 Connector version 1 and 3 IP66, IP67 and IP69K
(DIN EN 60529), DIN 40050-9 (with Rexroth plug-in connector)1)
Connector version 8 and 9 IP66, IP 67 and IP 69K
(with installed and locked plug-in connector)1)
On-board electronics (EPM2) Data from page 49; see also instruction manual
64815-B
Spool position sensor See data sheet 95190
Notice
▶▶ Please contact us if the unit is to be used outside the
specified range of values.
▶▶ The technical data were determined at a viscosity of
ν = 32 mm²/sec (HLP46: 50 °C).
Modular system
Control blocks in the M4-12 series have a modular structure. D: Electrohydraulic actuation W
They can be combined to provide the perfect solution for the E: Electrohydraulic actuation W with spool
application at hand. position sensor
F: Electrohydraulic actuation with on-board
Control block with lateral inlet plate electronics EPM2 CBA
1. Inlet plate 2.4 Actuation B side
A: Closed center with spool position sensor SJ A: Mechanical actuation Z with tongue
B: Mono block JM, combined with 1 spool axis B: Mechanical actuation N with hand lever
C: Open center P C: Standard cover –
D: Closed center J D: Mechanical actuation K with hand lever
2. Directional valves E: Mechanical actuation B2 with guide and
2.1 LS pressure limitation hand lever (aluminum-free)
2.2 Secondary pressure limitation 2.5 Electro-proportional LS pressure limitation
2.3 Actuation A side 3. End plate
A: Mechanical actuation A A: With LS unloading LA
B: Mechanical actuation M B: With LS port LZ
C: Hydraulic actuation H C: With two installation bores LAW…W…
2.2
E
2.4
D
2.
C
C B
B
A
A
3.
2.1
D
E
D 2.5 C
C
B B
2.3 1.
A
2.2
2.4
D
2.
C
E
B
D 2.
C A
3.
2.1
1.
F
B
E
A
D
2.5
C
3.
2.3 B
2.
1.4 E
1.7
D
C
1.
1.3
012
1.1 1.2
F
1.5
E
1.6 B
Ordering code
01 02 03 04 05 06 07 08 09 10 11 12
M4 – G12345 – 2 0 / 3 M4-12 J W21 – V_ 01 -450
07 Inlet plate
10 Sealing material
11 Line connections
Directional valves
Inlet plate
01 02 03 04 05 06
M4-12-2X /
Design, system
01 Open center Lateral inlet plate P
Closed center Lateral inlet plate J
Lateral inlet plate with integrated switch-over axis SJ
Central inlet plate JZ
Central inlet plate for combination M4-12/M4-15 JK
Mono block Open center (installation of further directional valves is not possible) PM
Closed center (installation of further directional valves is possible; available only
JM
in variants …M…)
Option 1
04 With LS switch-off (only in conjunction with inlet J, P) A
With LS damping nozzles, specifi- LS to pressure compensator Pressure compensator to LS
cation of the nozzle diameter in d = 0.6 d = 0.6 S0.6–0.6
mm (only in conjunction with
d = 0.6 d = 1.2 S0.6–1.2
inlet P)
d = 0.4 d = 1.2 S0.4–1.2
Without LS damping nozzles (can be retrofitted, only in conjunction with inlet P) N
With spool position sensor (only in conjunction with inlet SJ) S
Without spool position sensor (only in conjunction with inlet SJ) B
Option 2
06 With unloading function, max. flow on the pump side 100 l/min (only in conjunction with inlet P) P100
= Preferred program
Directional valves
01 02 03 04 05 06 07 08 09 10 11 12 13
M4-12-2X / *
Spool axis 1
*
Spool axis 2
*
Spool axis 3, etc.
Pressure compensator
01 With pressure compensator, with load holding function S
Without pressure compensator, with load holding function (not in conjunction with PM) C
Without pressure compensator, without load holding function Q
With sensitive pressure compensator, with load holding function F
With 3-way pressure compensator (in conjunction with PM only) D
Without pressure compensator bore for switch-over axis Z
Spool type4)
05 Main spool E E
Main spool J J
Main spool Q Q
Main spool with regeneration function R
Plunger cylinder as a consumer2) P
Floating position spool 2)
W
Floating position spool2) Y
Flow
06 Flow in consumer port A and B (parameter in l/min, 3-digit) …–…
Main spool with pressure function T (only in conjunction with E, J or Q)2) …T…
Main spool with pressure function T (only in conjunction with E) 2)
…M…
Actuation A side
07 Mechanical only Spring-centered A
With detent in 1 B1
With detent in 2 B2
With detent in 1, 2 B4
Mechanical 5)
Encapsulated, spring-centered M
Hydraulic6) H
Electrohydraulically proportional Standard W2
With measuring ports, on both sides W8
With damping nozzle + check valve for hydraulic superposition G2
Electrohydraulically switchable Standard W4
With damping nozzles, on both sides W5
With measuring ports, on both sides W6
With damping nozzle, with measuring ports, on both sides W7
With damping nozzle + check valve for hydraulic superposition G4
Electrohydraulic actuation with on-board Standard CBA
electronics (EPM2) With position sensor CPA
Actuation B side
09 Mechanical only, spool end with tongue Z
Mechanical only, spool end with tongue and hand lever2) N
Standard cover –
Cover with hand lever8) Revolving Not revolving
Without hand lever R X
Hand lever position 60° K N
Hand lever position 0° L O
Hand lever position -60° M P
5) Always in conjunction with revolving hand lever 8) For more details and explanations, see “Variant overview” on page 30
6) For combination with mechanically superposed actuation (B side), 9) Secondary valves must be present in the hydraulic circuit
Bosch Rexroth recommends a non-revolving hand lever
7) Parameter only required with electrohydraulic actuation and with
= Preferred program
electro-proportional pressure limitation
End plate
01 With LS unloading LA
With additional P and T port LAPT
With two installation bores LA
Threaded plug Q Q
Electrohydraulically proportional W2 W2
Electrohydraulically switchable W4 W4
With three installation bores LA
Threaded plug Q Q Q Q Q Q
Pressure reducing valve (specified pressure in bar, 3-digit) … … …
4/2-way spool valve according to data sheet 18136-09
KKDER… KKDER… KKDER…
(specifications in plain text)
Without LS unloading LZ
With additional P and T port LZPT
Mono block, no end plate LM
Adapter plate for SP-08 directional valves + inlet pressure limitation
L8
(specified pressure in bar, 3-digit)
Adapter plate for ED1 and ED2 valves1) TI
Diversion plate for use with central inlet plate LU
With two installation bores LU
Threaded plug Q Q
Electrohydraulically proportional W2 W2
Electrohydraulically switchable W4 W4
Sealing material
02 FKM (fluoroelastomer) V_
NBR (nitrile rubber), FKM (fluoroelastomer) MV
NBR (nitrile rubber), FKM (fluoroelastomer) for low temperature range down to -40 °C (on request) MT
Order examples
A1 B1 C A3 B3
P P
X
Y
LS LSZ
a a a
b b b
P
A
T
T T
MB MA
Spool axis 1 ––Without pressure compensator, with load holding Spool axis 1
function 01 02 03 04 05 06 07 09 10 11
––With LS pressure relief valve for consumer port A
C 250 M B E 050-000 A Z A230 Q
250 bar and LS relief plug in B
––Spool symbol E
––Flow in A 50 l/min, port B plugged
––Type of actuation: mechanical, spring-centered,
not encapsulated, with tongue
––Secondary valve: adjustable shock/feed valve for
actuator port A 230 bar, secondary valve bore B
plugged
Spool axis 2 ––Without pressure compensator, without load hold- Spool axis 2
ing function 01 02 03 04 05 06 07 09 10 11
––With 1 LS pressure relief valve for consumer ports
Q = M 275 E 100-100 H – H100 A230
A and B 275 bar
––Spool symbol E
––Flow in A and B 100 l/min
––Type of actuation: hydraulic
––Secondary valve: non-adjustable shock/feed valve
for actuator port A 100 bar, adjustable shock/
feed valve for consumer port B 230 bar
Spool axis 3 ––With pressure compensator, with load holding Spool axis 3
function 01 02 03 04 05 06 07 08 09 10 11
––Without LS pressure relief valve bore
S Z Z Z J 070-070 W7 8 X Z Z
––Spool symbol J
––Flow in A and B 70 l/min
––Type of actuation: electrohydraulically switchable,
with damping nozzle, with measuring ports
––With DT04-2P connector (Deutsch) 24 V
––Hand lever cover, not revolving, without hand lever
––Without secondary valve (cannot be retrofitted)
End plate, ––With internal LS unloading End plate, additional information
additional ––FKM seals 01 02 03
information ––Pipe thread connections
LA V 01
M X A1 B1 a b A2 B2 Mb A3 B3
P
Y
LS
a
b
P
A
T
T
MB MA MA Ma
Spool axis 1 ––With pressure compensator, with load holding Spool axis 1
function 01 02 03 04 05 06 07 08 09 10 11
––Without LS pressure relief valve bore S Z Z Z E 100-100 W6 1 K Q Q
––Spool symbol E
––Flow in A and B 100 l/min
––Type of actuation: electrohydraulically proportional
with measuring ports on both sides
––With Junior Timer, 2-pin (AMP) 24 V
––Overriding hand lever (revolving)
––Secondary valve bores plugged
Inlet ––Closed center, central Inlet
––With primary pressure relief valve, set to 300 bar 01 02 03
––With internal pilot oil supply JZ 300 Y
Spool axis 2 ––With pressure compensator, with load holding Spool axis 2
function 01 02 03 04 05 06 07 09 10 11 13
––With LS pressure relief valve for consumer port A S 270 L 300 E 090-090 CBA K Q Q KBPSL8BA
270 bar, consumer port B 300 bar
––With electro-proportional Pressure limitation,
210 bar (decreasing characteristic curve)
––Spool symbol E
––Flow in A and B 90 l/min
––Type of actuation: digital OBE
––Overriding hand lever (revolving)
––Secondary valve bores plugged
End plate, ––With internal LS unloading End plate, additional information
additional ––FKM seals 01 02 03
information ––Pipe thread connections LA V 01
Mb A1 B1 LS P Y MP X A2 B2
P
X
Y
LS
a a
b b
P
A
T
T
Ma T MB MA
Closed center with combination inlet plate for M4-12 and M4-15 directional valves
Example: ––Three-fold control block with 3 directional valves Ordering codes:
––Variable pump qV, max = 200 l/min
Short type, ––Diversion plate Short type, diversion plate
diversion 01
plate
3 M4 – 15 – 2X / LU
M4-15 spool ––With pressure compensator, without load holding Spool axis 1
axis 1 function 01 02 03 04 05 06 07 09 10 11
––With LS pressure relief valve for consumer port A
T 230 M B E 190-000 CBA K Q Q
230 bar and LS relief plug in B
––Spool symbol E
––Flow in A 190 l/min, port B plugged
––Type of actuation: digital OBE
––Overriding hand lever (revolving)
––Secondary valve bores plugged
Inlet ––Central closed center for M4-12/M4-15 Inlet
––With primary pressure relief valve, set to 280 bar 01 02 03
––With internal pilot oil supply
JK 280 Y
M4-12 spool ––With pressure compensator, with load holding Spool axis 2
axis 2 and 3 function 01 02 03 04 05 06 07 09 10 11
––With LS pressure relief valve for consumer port A
S 180 M 120 E 090-090 CBA – Z Z
180 bar, consumer port B 120 bar
––Spool symbol E
Spool axis 3
––Flow in A and B 90 l/min
––Type of actuation: digital OBE 01 02 03 04 05 06 07 09 10 11
––Without secondary valve bores S 180 M 120 E 090-090 CBA – Z Z
A1 B2 LS P Y M X A2 B2 A3 B3
P
X
Y
LS
a a a
b b b
P
A
T
T
MB MA T MB MA MB MA
Inlet plates
M
P Y LS T
Ordering code:
J Q Y
M
P Y LS T
Ordering code:
J Q Y A
SJ 350 Y D Q080
Y LS P M T
Ordering code:
M
JZ … X
Y
▶▶ Specified pressure in bar required after JZ (3-digit) P T
LS
Ordering code:
M
JZ Q Y
Y
P T
LS
Ordering code:
M
JZ Z Y
Y
▶▶ Primary pressure relief valve is not retrofittable P T
LS
Mono block
D = M … J …-… W2 1 – H… H… A
A B
b
LM V 01
a P T
▶▶ Primary pressure limitation via pressure compensator
and LS-PRV
X
P Y T
P X Y LS T
Notice a P T
P X Y LS T
Directional valves
100
80
Flow [l/min]
60
40
20
LS pressure limitation
100
80
Flow [%]
60
40
20
a P T
a P T
a P T
a P T
Preferred program:
S … L … J …–… H – H… H… KBPSL8BA
S … J … J …–… H – H… H… KBPSL8AA
KBPS…BA: KBPS…AA:
S … R … J …–… H – H… H… KBPSR8BA Decreasing characteris- Increasing characteristic
tic curve curve
S … N … J …–… H – H… H… KBPSR8AA
24 V; 0.8 A)
1
50 bar KBPSC8BA KBPSC8AA 350
3
100 bar KBPSF8BA KBPSF8AA 300
150 bar KBPSH8BA KBPSH8AA 250
2 4
210 bar KBPSL8BA (2)
KBPSL8AA (4)
-033 200
250 bar KBPSN8BA KBPSN8AA
150
315 bar KBPSP8BA KBPSP8AA
350 bar KBPSR8BA (1)
KBPSR8AA (3) 100
Plug
Cover plate
S … K … J …–… H – H… H… MH2DAD+Q
A
A B
b Ma/b
P T
a
Main spool
Hydraulic cylinder as consumer Regeneration function (P, B → A) Plunger cylinder as a consumer
E R P
A MBMA B A MBMA B A MBMA B
P LS T P LS T P LS T
P LS T P LS T
P LS T
P LS T P LS T P LS T
▼▼ Characteristic curves symmetric main spool P → A/B ▼▼ Characteristic curves floating position spool P → A/B
140 100
1
120 2
80
3
Nominal flow [l/min]
100
Typical flow [l/min]
4 60
80
W spool
5
60 40
6
40
7 20
20 8
9
10
0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 1 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 1
Current [A] Current [A]
0.89 1.0 1.12 1.23 1.34 1.45 1.56 1.68 1.8 2 0.89 1.0 1.12 1.23 1.34 1.45 1.56 1.68 1.8 2
Current [A] Current [A]
Flow
Symmetric main spool
Pressure
Spool type compen- Flow in l/min
sator
130–130 (1) 100-100 073-073 052-052 034-034 023-023 014-014 007-007
S 120-120 (2) 085–085 (4)
065-065 (5) 045-045 (6) 030-030 (7) 020-020 (8) 012-012 (9) 006-006 (10)
E, J, Q
100-100 (3) 070-070 057-057 038-038 026-026 017-017 010-010 005-005
C 140-140 115-115 090-090 063-063 042-042 028-028 017-017 008-008
(1)
… (10)
Note on spool characteristic curve page 26.
Notice
Design by technical sales.
Example: Solution:
▶▶ Spool type J ▶▶ 85-liter spool + 2 discs = 100 l/min
▶▶ Pressure compensator S ▶▶ Set 90 liters via stroke limiter.
▶▶ Setpoint value: qconsumers = 90 l/min
Spool type Pressure Flow in l/min Number of discs
compensator
100-100 With 2 discs (pressure compensator Δp = 8.5 to 11.5 bar)
E, J, Q S 085-085 With 1 disc (pressure compensator Δp = 6 to 9.5 bar)
070-070 Without disc (pressure compensator Δp = 4 to 7 bar)
Notice
Place directional valves with maximum flow as close as
possible to the inlet plate.
Types of actuation
Mechanical only (not encapsulated) with tongue Mechanical only (not encapsulated) with hand lever and detent
AZ B1N
A B A B
P T P T
▶▶ Centering in central position by means of springs in case ▶▶ Centering in central position by means of springs in case of
of non-actuation. non-actuation.
▶▶ For variants, see page 29.
Mechanical (encapsulated) Hydraulic
M 1) 2) H
A BA B A B
X
b a
Y
P TP T P T
▶▶ Centering in central position by means of springs in case ▶▶ Centering in central position by means of springs in case
of non-actuation. of non-actuation.
▶▶ All hand lever position options are possible, cf. also ordering ▶▶ Recommended hydraulic pilot controls:
codes on page 30. Type 2TH6 and 4TH6 according to data sheet 64552 or 64555
1) Revolving hand lever
▶▶ On/off valve type FTWE2K according to data sheet 58007 ▶▶ On/off valve type FTWE2K according to data sheet 58007
Electrohydraulically switchable with measuring ports on both sides Electrohydraulically switchable with damping nozzle, with
measuring ports on both sides
W6 W7
Mb Mb
X A B X b A B
Y Ma Y Ma
P T a P T
▶▶ On/off valve type FTWE2K according to data sheet 58007 ▶▶ On/off valve type FTWE2K according to data sheet 58007
Electrohydraulically proportional Electrohydraulically proportional with measuring ports
on both sides
W2 W8
Mb
Y b A B Y b A B
X X
Ma
a P T P T
a
▶▶ FTDRE2K proportional pressure reducing valve as per data sheet ▶▶ FTDRE2K proportional pressure reducing valve as per data sheet
58032 58032
Electrohydraulically proportional with damping nozzle and check valve Electrohydraulically switchable with damping nozzle and check
for hydraulic superposition valve for hydraulic superposition
G2 G4
b b
Y X b A B
b A B
a a
X Y
P T a P T
a
▶▶ FTDRE2K proportional pressure reducing valve as per data sheet ▶▶ FTDRE2K on/off valve as per data sheet 58007
58032
Electronic pilot module Electronic pilot module with position sensor
CBA CPA
Y A B Y A B
b b
X X
a P T a P T
▶▶ Digital interface, standard, refer to instruction manual 64815-B ▶▶ Digital interface, with position sensor, refer to instruction manual
64815-B
AZ AN
B1 Z B1 N B1 = detent in 1
A B 1
0
2
B2 Z B2 N 2 0 1 B2 = detent in 2
P T
B4 Z B4 N B4 = detent in 1, 2
Actuating force:
Tongue < 250 N (spool axis)
±1°
20° 1° 60° = B2, G2
23°
±
1°
°± °
20 °±1 30° = B12, G12 1
1 23 60° = K, N
0° = F2, H2
2
0° = L, O
Ordering code
Standard cover Clamping piece with lever Clamping piece without lever
Lever Revolving Not revolving Revolving Not revolving Revolving Not revolving
2 2
Upward, 60° K N B G T Q
3 3
2 2
Upward, 30° B1 G1 T1 Q1
3 3
1 1
Straight, 0° L O F 2 H 2 U S
3 3
1 1
Downward, -30° D1 J1 V1 C1
2 2
1 1
Downward, -60° M P D J V C
2 2
Without lever R X
Secondary valves
Notice
Shock valves have a fixed setting!
Options
Pin 4 Pin 1
Pin 3 Pin 2
Notice
Pin 1: +VBatt
Pin 2: GND ▶▶ Design by technical sales.
Pin 3: Sensor signal for flow direction of consumer port B For further information, see data sheet 95190.
Pin 4: Sensor signal for flow direction of consumer port A
● = available
End plates
With LS unloading
Ordering code:
LA LS T
LS
Ordering code:
LA … KKDER… … KKDER… Q Q
P X Y LS T
PXY C1 C2 T
P X Y LS M4-12 T T
Dimensions
Line connections
Ports
P Pump LS Load sensing signal
A, B Consumer LSZ LS supply
a, b Pilot oil M Measuring port, pump
T Reservoir MA, MB Measuring port, LS pressure
X Pilot oil supply Mb, Mb Measuring port, pilot pressure
Y Pilot oil return C External consumers
Inlet plates
103 103
25 25
12
M10; 15 deep
12
M10; 15 deep
48 48 13.5
4
Y
LS X M
114
Y
114
X
92
LS
51.5
44.5
54
50
40
27
25
13 35
50 4 65 4
38.5 45
65 91.5
89 132
125
26
43
T
28
T P
48
45
85 91.5 48
112.5 125
34.5 12
15
27
25
12
80
65
M10; 15 deep 30 78 35
48 90
M10; 15 deep
MP
114
X
130
93
43
LS X
25
47
Y
40
25
Y
137 15
153 14
P 64
27
70
53
65
P
T
60
T LS
46
37
76 ca. 34 40 ca. 48
99 105
Mono block
▼▼ Standard mono block Closed Center JM as input plate combined with 1 axis; further directional valves are flange-mountable
47
27
Fastening thread
103
2 × M10; 19 deep
125 36.5
T
Y
20.5
93
LS
68
63
P
52
37.5
29
89
16.5
15 107.5
18
44.5
72
78.5
94
50
15.5
37
88
94
17.5
168
▼▼ Standard mono block Open Center PM (installation of further directional valves is not possible)
43
Fastening thread
95 3 × M10; 19 deep
125
124
119
98.5
87.5
72
33
19
15 40
18 67
72 114.5
78.5
94
50
41
98
Directional valves
▼▼ Housing with secondary valve bore, ▼▼ Housing without secondary valve bore, ▼▼ Housing for switch-over axis,
consumer port G 1/2 consumer port G 3/4 or G 1/2 consumer port G 3/4
… H… H… … … X X …
… Q Q …
125 125
83.5 98 125
49 46
47
B B
18
C
23
28
23
46
46
46
A A
30 30 30
MB MB MA
33
33
34
MA MA
13
13
19 19
Actuation
▼▼ Mechanical actuation only, spring-centered with tongue ▼▼ Mechanical actuation only with detent, tongue and lever
Ø8
280
8
45.5 41.5
52
78.5 128
▼▼ Mechanical/hydraulic actuation with cover with clamping piece ▼▼ Electrohydraulic actuation with standard cover
and hand lever (encapsulated), aluminum-free
Ordering code:
Ordering code:
… W. – …
… M B2 …
A side B side
… H B2 …
A side B side
26.9 23.9
"b"
107
56.5
"a"
b
Mb Ma
209
21.7 28.9
107
a
56.5
108 56.5
64 157
Ordering code:
… G. – …
▼▼ Electronic pilot module EPM2 with hand lever (encapsulated) A side B side
Ordering code:
… C.A K …
61
147
26.9 23.9
169
56.5
"a"
21
Mb Ma
230
152
60
64
°
108
135 86
46
End plates
103
103
25
25
15
15
M10
M10
125
125
114.5
114.5
30 67
30 67
15 46.5 15 46.5
83.5
114
114
15
63
63
27
LSZ
15
17
15
▼▼ End plate LAPT ▼▼ End plate LZPT
103 103
25 25
15
15
M10 M10
125 125
114.5 114.5
50 67 50 67
15 46.5 15 46.5
T T
P
114
P
114
83.5
83.5
63
63
35
35
LSZ
27
87 37
15
87
15
123.5
45.5
103
20
25
M10
20
M10
106
12.5 47
18 28
8 16 17.5
33
33
T
114
50 C2
83.5
64
63
17
77
93.5
90
96
114
C1
P
83.5
35
15
46.5 Y
67
67 24
15
114.5
87.5 35
125
135
145
123.5
45.5
20
M10
105
77
47
17.5 27 18
33
C2
33
T
50
64
64
75
88
84
C1
93.5
LSZ
114
P1
83.5
Y1
35 67
15
87.5
135
150
Order examples
▼▼ Closed center control block with lateral inlet plate (as per order example on page 13)
429
230
"b"
152
LS
X Y
86.5
"a"
63
44.5
54
40
39
27
13
38.5
65
89
135 125 86
4 98
8 83.5 11 114
49
6 10
18
30
B2
28
46
A2
C 8
23
239
46
47
B1 3
23
46
4
A1 7
5
T 50 9
28
46 114 4
2
4
108 48 56.5
85
114.5
67
15
46.5
83.5
103
25
1 Name plate
12
19
25 9 Stroke limiter
30 10 Secondary valves
72
11 Tie rod
103
12 Fastening thread 4 × M10; 15 deep
▼▼ Open center control block with lateral inlet plate (as per order example on page 14)
1
"b"
X M
86.5
"a"
63 LS
51.5
50
39
25
35
108 45 79
91.5
132
317
114 34
125 86
86.5
98 56.5
13 39
83.5 52
27
4 49
41.5 10 LSZ
13
46
50
7 T
B3
A
46
6 A3 11
9
AB
B2
23
46
257
A2
3 "a" "b"
AB
5
13.5
B1
8
46
A1
12
B
Ø8
26
Y
43
65
T
P
2 50 45 7 4
64 91.5 48 92
114 31.5
114.5
15
87
35
83.5
46.5 P
67
103
30 1 Name plate
25 2 Inlet plate P…Y
19
3 Directional valves
4 LZPT end plate
12
20
8 Mechanical actuation only with
tongue (side B)
9 Control cover, standard (side B)
10 Control cover X (side B)
11 Stroke limiter
15
25 12 Secondary valves
103 13 Tie rod
14 Fastening thread 4 × M10; 15 deep
▼▼ Closed center control block with central inlet plate (as per order example on page 15)
"b"
86.5
83.5
"a"
63
39
15
46.5
10 67
114.5
125
137
125
11 83.5 4 114
49 6
7 8.5 3
18
28
30
B2
15
46
A2
1 P
X
27
30
8
53
65
65
270
80
MP
T LS
Y
2 B1
A
46
A1
B
35
6
108 28.5
3 9
4 7
67.5
5 25
90.5 43
125 93
114
135 125 170
97 114.5 86
46.5
15
52.5
83.5
°
152
60
230
67
137
103
1 Name plate
25
8.5 2 Central inlet plate JZ
20
12 3 Directional valves
4 End plate LA
5 Diversion plate LU
34.5 6 Control cover W (side A) for
25
electrohydraulic actuation
7 Control cover CBA (side A) with
112.5
electronic pilot module (EPM2)
8 Control cover K (side B)
9 Stroke limiter
15
▼▼ Closed center control block with combination inlet plate (as per order example on page 16)
236
157.5
135 133
440
98
46
11 25 78 114
5 12
15
30
4
46
23
9
A3 B3
10
46
20
1
12
A2 B2
44
T
30
2 118
40
45
76
344
90
63
MP
75
LS
40
P X
22
51
A1 B1
3
25.5
7 8
50
35
6
18 20 25
106
48.5 40
85 47
93.5 130
28
48
113
141
125 64
1 Name plate
2 Central inlet plate JK
63
▼▼ PM open center mono block (installation of further directional valves is not possible)
43
95
2
125
4
T 5
124
Y
98.5
72
33
P
3 15
18
1 72
78.5
94
50
41
A B
98
6
144.5
105.4 67
40
11
19
43
87.5
67
90.5
1 Name plate
119
2 Mono block PM
3 Control cover W (side A)
for electrohydraulic
actuation
4 Control cover, standard
(side B)
294.5
5 Stroke limiter
6 Fastening thread
3 × M10; 19 deep
Options
▶▶ Position sensor
▶▶ Measuring port
4 3 2 1
2
UBat
CANlow
CANhigh
Gnd
3 2 1
1 2 3 4
Notice B B
Connection cables and connectors are not included and
must be ordered separately (see “Accessories” on
page 51).
Rexroth guarantees the correct function of the device, as
A A
described in instruction manual 64815-B. Rexroth A A A A
assumes no liability for the safe operation of the machine
or system of which this device forms part.
3 2 1
Accessories
Connection cable
R917c05458 Connector Coding 1 (black), dummy connector with integrated terminal resistor
Recommended plug-in connector 1 and 3 Junior Timer, Recommended plug-in connector 8 and 9 DT04
2-pin (AMP) (DEUTSCH)
▶▶ Material number: R900313533 ▶▶ Material number: R900733451
–– For conductor cross section from 0.5 to 1 mm² and –– For conductor cross section from 1.3 to 2.08 mm²
for an insulation diameter of the individual seals from and for an insulation diameter of the individual seals
1.2 to 2.1 mm from 1.35 to 3.05 mm
▶▶ Material number: R901022127 ▶▶ Material number: R901017847
–– For conductor cross section from 0.5 to 1 mm² and –– For conductor cross section from 0.83 to 1.3 mm²
for an insulation diameter of the individual seals from and for an insulation diameter of the individual seals
2.2 to 3 mm from 1.35 to 3.05 mm
▼▼ Recommended plug-in connector for Junior Timer, 2-pin (AMP) ▼▼ Recommended plug-in connector for DT04 (DEUTSCH)
M4 configurator
Related documents
Bosch Rexroth AG © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal,
Mobile Applications exploitation, reproduction, editing, distribution, as well as in the event of
Zum Eisengießer applications for industrial property rights. The data specified within only
97816 Lohr am Main, Germany serves to describe the product. No statements concerning a certain condition
Phone +49 9352 18-0 or suitability for a certain application can be derived from our information.
info.ma@boschrexroth.de The information given does not release the user from the obligation of own
www.boschrexroth.com judgment and verification. It must be remembered that our products are
subject to a natural process of wear and aging.