Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    250w Cellule PV PDF

    Uploaded by

    Hassen Kelifi
    The document provides technical specifications for the Ensol E-PV 250W photovoltaic module. The module is made up of 60 polycrystalline silicone solar cells connected in series-parallel and laminated between a tempered glass cover and a patented aluminum frame. Key electrical parameters of the module include a peak power output of 250W, nominal voltage of 30.2V, and short-circuit current of 8.81A. Production of the module involves computer monitored soldering and lamination in a vacuum to ensure high quality and repeatability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    250w Cellule PV PDF

    Uploaded by

    Hassen Kelifi
    48 views1 page
    The document provides technical specifications for the Ensol E-PV 250W photovoltaic module. The module is made up of 60 polycrystalline silicone solar cells connected in series-parallel and laminated between a tempered glass cover and a patented aluminum frame. Key electrical parameters of the module include a peak power output of 250W, nominal voltage of 30.2V, and short-circuit current of 8.81A. Production of the module involves computer monitored soldering and lamination in a vacuum to ensure high quality and repeatability.

    Original Title

    250w cellule pv.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical specifications for the Ensol E-PV 250W photovoltaic module. The module is made up of 60 polycrystalline silicone solar cells connected in series-parallel and laminated between a tempered glass cover and a patented aluminum frame. Key electrical parameters of the module include a peak power output of 250W, nominal voltage of 30.2V, and short-circuit current of 8.81A. Production of the module involves computer monitored soldering and lamination in a vacuum to ensure high quality and repeatability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views1 page

    250w Cellule PV PDF

    Uploaded by

    Hassen Kelifi
    The document provides technical specifications for the Ensol E-PV 250W photovoltaic module. The module is made up of 60 polycrystalline silicone solar cells connected in series-parallel and laminated between a tempered glass cover and a patented aluminum frame. Key electrical parameters of the module include a peak power output of 250W, nominal voltage of 30.2V, and short-circuit current of 8.81A. Production of the module involves computer monitored soldering and lamination in a vacuum to ensure high quality and repeatability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Technical data of a policrystalline photovoltaic

    module Ensol E-PV 250W

    E-PV 250W – Photovoltaic module PV


    Symbol Unit Value
    Width A mm 990
    Photovoltaic module E-PV 250W is a device used for conversion of
    a solar radiation energy into electrical current. Module has a po- Height B mm 1650
    licrystalline silicone cells. They can be used in off-grid installations, Depth C mm 40
    as well as in the installations connected to the mains (on-grid). 2
    Surface S m 1,63
    Casing Patented aluminium profile
    Module is made of 60 cells connected in a series-parallel way, ti-
    ghtly laminated, covered with a tempered glass with a thickness of Glass thickness 4,0
    4 mm, framed in a special, patented aluminium profile. Electrical parameters
    Peak power Pmax W 250
    Cells are soldered without a contact with the use of hot air, what
    (with 1000 W/m2)
    minimizes creation of micro-tensions in the structure of cells. The
    Type of cells Policrystalline
    whole soldering process of a photovoltaic module is held in the
    high-class laminators in conditions of deep vacuum. Lamination pa- Amount of cells pcs 60
    rameters are strictly defined by technology and cannot by changed Size of cells mm 156 x 156
    by its operators, what guarantees high quality and repetitiveness of Nominal current Impp A 8,28
    a lamination.
    Short-circuit current Isc A 8,81
    Nominal voltage Vmpp V 30,2
    Photovoltaic module E-PV 250W is controlled and monitored
    through the whole production process: conducting a computer con- Open-circuit voltage Voc V 37,72
    trolled monitoring of the quality of cells before and after soldering, Maximum system voltage V 1000DC
    electrical parameters control on a special AAA class tester in ac- Temperature range ºC -40-85
    cordance with IEC 60904-9,

    Advantages of a photovoltaic module E-PV 250W:

     photovoltaic module E-PV 250W is the purest source of electric


    energy

     the use of high technology in the production process (soldering


    and lamination)

     computer monitoring of a cells soldering cells, specialistic electri-


    cal parameters control and the quality of a production process
    control

     long lifespan of a module.

    You might also like