3790 en - 06.

2007 / d

Alte rnators
LSA 46.2 - 4 Pole
Electrical and mechanical data
 LSA 46.2 - 4 Pole

SPECIALLY ADAPTED FOR APPLICATIONS

The LSA 46.2 alternator is designed to be suitable for typical generator applications, such as: backup,
standard production, cogeneration, marine applications, rental, telecommunications, etc.

COMPLIANT WITH INTERNATIONAL STANDARDS

The LSA 46.2 alternator conforms to the main international standards and regulations:
IEC 60034, NEMA MG 1.22, ISO 8528/3, CSA, UL 1446, UL 1004B on request, marine regulations, etc.
It can be integrated into a CE marked generator.
The LSA 46.2 is designed, manufactured and marketed in an ISO 9001 environment.

TOP OF THE RANGE ELECTRICAL PERFORMANCE

- Class H insulation.
- Standard 12-wire re-connectable winding, 2/3 pitch, type no. 6 .
- Voltage range: 220 V - 240 V and 380 V - 415 V (440 V) - 50 Hz / 208 V - 240 V and 380 V - 480 V - 60 Hz.
- High efficiency and motor starting capacity.
- Other voltages are possible with optional adapted windings:
- 50 Hz: 440 V (no. 7), 500 V (no. 9), 600 V (no. 22 or 23), 690 V (no. 10 or 52)
- 60 Hz: 380 V and 416 V (no. 8), 600 V (no. 9).
- Total harmonic content < 2,5 %.
- R 791 interference suppression conforming to standard EN 55011 group 1 class B standard for European zone (CE marking).

EXCITATION AND REGULATION SYSTEM SUITED TO THE APPLICATION

Excitation system Regulation options

T.I. R 726 R 731 R 734 P
Voltage Current transformer Mains 3-phase 3-phase sensing on Remote
SHUNT AREP PMG
regulator for paralleling paralleling sensing mains paralleling voltage
unbalanced potentiometer

R 250 Std - - - - - -
R 448 optional Std Std
DECS 100 - optional optional included included NA

Voltage regulator accuracy +/- 0.5% - : possible adaptation - NA : not possible.

PROTECTION SYSTEM SUITED TO THE ENVIRONMENT

- The LSA 46. 2 is IP 23.
- Standard winding protection for clean environments with relative humidity ð 95 %, including indoor marine environments.
Options:
Filters on air inlet and air outlet (IP 44).
Winding protections for harsh environments and relative humidity greater than 95%.
Space heaters.
Thermal protection for windings and shields.

REINFORCED MECHANICAL STRUCTURE USING FINITE ELEMENT MODELLING

- Compact and rigid assembly to better withstand generator vibrations.
- Steel frame.
- Cast iron flanges and shields.
- Twin-bearing and single-bearing versions designed to be suitable for engines on the market.
- Half-key balancing.
- Greased for life bearings (regreasable bearings optional).

ACCESSIBLE TERMINAL BOX PROPORTIONED FOR OPTIONAL EQUIPMENT

- Easy access to the voltage regulator and to the connections.
- Possible clusion of accessories for paralleling, protection and measurement.
- 8 way terminal block for reconnecting voltage reconnection.
- DECS 100 digital AVR adapted to the machine exterior.

Copyright 2004 : MOTEURS LEROY-SOMER

Products and materials shown in this catalogue may, at any time, be modified in order to follow the latest technological developments, improve the design or change conditions of utilization.
Their description cannot, in any case, engage LEROY-SOMER liability. The values indicated are typical values.

2
 LSA 46.2 - 4 Pole

Common data
Insulation class H Excitation system SHUNT A R E P or PMG
Winding pitch 2/3 ( N° 6 ) A.V.R. model R 250 R 448
Terminals 12 Voltage regulation (*) ± 0,5 % ± 0,5 %
Drip proof IP 23 Sustained short-circuit current - 300% (3 IN) : 10s
Altitude 1000 m Total harmonic TGH / THC (**) at no load < 2,5 % - on load < 2,5 %
Overspeed 2250 min-1 Waveform : NEMA = TIF (**) < 50
Air flow 0,43 m3/s (50Hz)/ 0,51 (60Hz) Wave form : I.E.C. = THF (**) <2%
(*) Steady state duty. (**) Total harmonic content line to line, at no load or full rated linear and balanced load.

Ratings 50 Hz - 1500 R.P.M.

kVA / kW - Power factor = 0,8
Duty T° C Continuous duty 40°C Continuous duty 40°C Stand-by / 40 °C Stand-by / 27 °C
Class / T° K H / 125° K F / 105° K H / 150° K H / 163° K
Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph.
Y 380V 400V 415V 440V 380V 400V 415V 440V 380V 400V 415V 440V 380V 400V 415V 440V
220V 230V 240V 230V 220V 230V 240V 230V 220V 230V 240V 230V 220V 230V 240V 230V
YY 220V 220V 220V 220V
46.2 M3 kVA 180 180 180 160 104 168 168 168 146 97 195 195 195 175 110 203 203 203 180 114
kW 144 144 144 128 83 134 134 134 116 78 156 156 156 140 88 162 162 162 144 91
46.2 M5 kVA 200 200 200 175 116 184 184 184 160 108 214 214 214 190 123 223 223 223 200 127
kW 160 160 160 140 93 147 147 147 128 86 171 171 171 152 98 178 178 178 160 102
46.2 L6 kVA 250 250 240 205 141 217 217 217 190 131 254 260 254 225 150 266 275 266 237 156
kW 200 200 192 164 113 174 174 174 152 105 203 208 203 180 120 213 220 213 190 125
46.2 L9 kVA 280 280 280 215 154 250 250 250 195 142 290 290 290 240 165 300 300 300 250 170
kW 224 224 224 172 123 200 200 200 156 114 232 232 232 192 132 240 240 240 200 136
46.2 VL12 kVA 315 315 300 260 187 276 276 260 230 170 327 327 310 285 200 341 341 325 300 208
kW 252 252 240 208 150 221 221 208 184 136 262 262 248 228 160 273 273 260 240 166

Ratings 60 Hz - 1800 R.P.M.

kVA / kW - Power factor = 0,8
Duty T° C Continuous duty 40°C Continuous duty 40°C Stand-by / 40 °C Stand-by / 27 °C
Class / T° K H / 125° K F / 105° K H / 150° K H / 163° K
Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph.
Y 380V 416V 440V 480V 380V 416V 440V 480V 380V 416V 440V 480V 380V 416V 440V 480V
220V 240V 240V 220V 240V 240V 220V 240V 240V 220V 240V 240V
YY 208V 220V 240V 208V 220V 240V 208V 220V 240V 208V 220V 240V
46.2 M3 kVA 192 205 220 228 128 177 189 198 210 119 203 219 228 244 136 211 225 237 255 141
kW 154 164 176 182 102 142 151 158 168 95 162 175 182 195 109 169 180 190 204 113
46.2 M5 kVA 205 219 230 250 136 190 203 211 225 126 219 235 245 262 145 227 242 252 273 151
kW 164 175 184 200 109 152 162 169 180 101 175 188 196 210 116 182 194 202 218 121
46.2 L6 kVA 257 276 289 300 173 239 255 265 278 160 276 295 308 324 184 285 304 317 337 192
kW 206 221 231 240 138 191 204 212 222 128 221 236 246 259 147 228 243 254 270 154
46.2 L9 kVA 296 316 328 343 197 273 291 302 302 182 313 338 351 357 209 326 348 366 375 220
kW 237 253 262 274 158 218 233 242 242 146 250 270 281 286 167 261 278 293 300 176
46.2 VL12 kVA 333 357 372 381 220 309 329 341 347 200 359 383 397 412 235 370 399 415 429 243
kW 266 286 298 305 176 247 263 273 278 160 287 306 318 330 188 296 319 332 343 194

3
 LSA 46.2 - 4 Pole

Efficiencies 50 Hz - P.F. : 1 / P.F. : 0,8

LSA 46.2 M3 LSA 46.2 L9
96% 96% 95,3 P.F. : 1
94,6 94,6 P.F. : 1 95,4
94,9 94,9 95,2
94,5 94
94
93 P.F. : 0,8
93,5 93,5
92,8 92,5 91,7 P.F. : 0,8 92,7
92 92 92,2
92
91,3 91,2
90 90
90,8

88 88
20 40 60 80 100 120 140 160 180 200 220kVA 40 80 120 160 200 240 280 320kVA

LSA 46.2 M5 LSA 46.2 VL12

95,7 P.F. : 1
96% 96%
95 P.F. : 1 95,7 95,7
94,8 95,2 95,2
94,8 94 93,7 P.F. : 0,8
94 P.F. : 0,8 93,9 94,1
92,4 93,5
93,2 92,3
92,3 93
92 92
92 91,6
91,2
90 90

88 88
20 40 60 80 100 120 140 160 180 200 220kVA 40 80 120 160 200 240 280 320 360kVA
LSA 46.2 L6
96% P.F. : 1
95
94,9 95,2 94,8
94
93,3 93,1 92,4 P.F. : 0,8
92,5
92 92
91,4
90

88
40 80 120 160 200 240 280kVA

Reactances (%) . Time constants (ms) - Class H / 400 V

M3 M5 L6 L9 VL12
Kcc Short-circuit ratio 0,44 0,45 0,41 0,48 0,5
Xd Direct axis synchro.reactance unsaturated 312 301 327 294 273
Xq Quadra. axis synchr.reactance unsaturated 187 180 196 176 164
T’do Open circuit time constant 1971 2042 2105 2175 2253
X’d Direct axis transient reactance saturated 15,8 14,7 15,5 13,5 12,1
T’d Short-Circuit transient time constant 100 100 100 100 100
X"d Direct axis subtransient reactance saturated 9,5 8,8 9,3 8,1 7,2
T"d Subtransient time constant 10 10 10 10 10
X"q Quadra. axis subtransient reactance saturated 11,8 10,9 11,5 10 8,9
Xo Zero sequence reactance unsaturated 0,5 0,8 0,7 0,7 0,5
X2 Negative sequence reactance saturated 10,6 9,9 10,4 9,1 8,1
Ta Armature time constant 15 15 15 15 15
Other data - Class H / 400 V
io (A) No load excitation current (SHUNT / AREP or PMG) 1 1 1 1,1 1
ic (A) Full load excitation current (SHUNT / AREP or PMG) 3,9 3,7 4 3,9 3,4
uc (V) Full load excitation voltage (SHUNT / AREP or PMG) 33 32 34 33 33
ms Recovery time ( U = 20 % trans.) 500 500 500 500 500
kVA Motor start. ( U = 20% sust.) or ( U = 50% trans.) SHUNT 340 397 462 538 694
kVA Motor start. ( U = 20% sust.) or ( U = 50% trans.) AREP 371 434 504 583 760
% Transient dip (rated step load) SHUNT / PF : 0,8 LAG 16,2 15,4 15,9 14,6 12,9
% Transient dip (rated step load) AREP / PF : 0,8 LAG 14,3 13,7 14,1 13 11,4
W No load losses 2810 3040 3690 4340 4800
W Heat rejection 12900 13180 16400 16810 16730

4
 LSA 46.2 - 4 Pole

Transient voltage variation 400 V - 50 Hz

Load application (SHUNT excitation) Load application (AREP or PMG excitation)

M3
25 % 25 % M3
M5
M5
L6
20 20
L6
L9
L9
15 VL12 15
VL12

10 10

5 5

0 0
0 50 100 150 200 250 300 350 kVA 0 50 100 150 200 250 300 350 kVA
kVA at Ø 0,8 power factor kVA at Ø 0,8 power factor

Load rejection (SHUNT excitation) Load rejection (AREP or PMG excitation)

M3 M5 M3 M5
25% 25%
L6 L6

20 20
L9 L9

15 VL12 15 VL12

10 10

5 5

0 0
0 50 100 150 200 250 300 350 kVA 0 50 100 150 200 250 300 350 kVA
kVA at Ø 0,8 power factor kVA at Ø 0,8 power factor

Motor starting (SHUNT excitation) Motor starting (AREP or PMG excitation)

M3 M5 L6 L9 VL12 M3 M5 L6 L9 VL12
30% 30%

25 25

20 20

15 15

10 10

5 5

0 0
0 100 200 300 400 500 600 700 800kVA 0 100 200 300 400 500 600 700 800 900kVA

kVA at Ø 0,6 power factor locked rotor kVA at Ø 0,6 power factor locked rotor

1 ) For a starting P.F. differing from 0,6 , the starting kVA must be multiplied by (Sine Ø /0,8)
2 ) For voltages other than 400V(Y) , 230V( ) at 50 Hz, then kVA must be multiplied by (400/U)2 or (230/U)2.

5
 LSA 46.2 - 4 Pole

Efficiencies 60 Hz - P.F. :1 / P.F. : 0,8

LSA 46.2 M3 LSA 46.2 L9
96% 96% P.F. : 1
P.F. : 1
95,3
94,7
95,2 95,2
94,8 94,6 94,4
94 94,2
94 93,3 P.F. : 0,8
93,6
92,6 92,7 92,1 P.F. : 0,8 93,2 93
92 92
91,7
91,1 91
90 90 90,2
90

88 88
40 80 120 160 200 240 280kVA 60 100 140 180 220 260 300 340 380kVA

LSA 46.2 M5 LSA 46.2 VL12

96% 95,7 P.F. : 1
96% P.F. : 1
95 95,6
95,5
95 93,9 P.F. : 0,8
94,9 94,6
94 94,4 94
94,1
92,7 P.F. : 0,8 93,6 93,8
93 93,2
92 92,4 92
91,3 91,2 90,5
90 90,3 90

88 88
40 80 120 160 200 240 280kVA 60 100 140 180 220 260 300 340 380 420kVA
LSA 46.2 L6
96% P.F. : 1
95
95 94,9
94 94,3 P.F. : 0,8
93,2 92,8
93
92 92,5
91,1

90 90,2

88
60 100 140 180 220 260 300 340kVA

Reactances (%) . Time constants (ms) - Class H / 480 V

M3 M5 L6 L9 VL12
Kcc Short-circuit ratio 0,41 0,43 0,41 0,47 0,5
Xd Direct axis synchro.reactance unsaturated 329 314 327 300 275
Xq Quadra. axis synchr.reactance unsaturated 197 188 196 180 165
T’do Open circuit time constant 1971 2042 2105 2175 2253
X’d Direct axis transient reactance saturated 16,7 15,3 15,5 13,8 12,2
T’d Short circuit transient time constant 100 100 100 100 100
X"d Direct axis subtransient reactance saturated 10 9,2 9,3 8,2 7,3
T"d Subtransient time constant 10 10 10 10 10
X"q Quadra. axis subtransient reactance saturated 12,4 11,4 11,5 10,2 9
Xo Zero sequence reactance unsaturated 0,5 0,5 0,6 0,4 0,4
X2 Negative sequence reactance saturated 11,2 10,3 10,4 9,3 8,2
Ta Armature time constant 15 15 15 15 15
Other data - Class H / 480 V
io (A) No load excitation current (SHUNT / AREP or PMG) 1 1 1 1,1 1
ic (A) Full load excitation current (SHUNT / AREP or PMG) 4 3,8 3,9 3,8 3,4
uc (V) Full load excitation voltage (SHUNT / AREP or PMG) 34 32 33 33 33
ms Recovery time ( U = 20 % trans.) 500 500 500 500 500
kVA Motor start. ( U = 20% sust.) or ( U = 50% trans.) SHUNT 420 496 575 673 867
kVA Motor start. ( U = 20% sust.) or ( U = 50% trans.) AREP 461 540 629 732 953
% Transient dip (rated step load) SHUNT / PF : 0,8 LAG 16,7 15,8 15,9 14,8 13
% Transient dip (rated step load) AREP / PF : 0,8 LAG 14,8 14,1 14,1 13,1 11,5
W No load losses 4180 4500 5530 6430 7090
W Heat rejection 15570 15680 18500 19690 19510

6
 LSA 46.2 - 4 Pole

Transient voltage variation - 480 V - 60 Hz

Load application (SHUNT excitation) Load application (AREP or PMG excitation)

M3
25 % 25 % M3
M5
M5

20 L6 20
L6
L9
L9
15 15
VL12
VL12

10 10

5 5

0 0
0 50 100 150 200 250 300 350 400 kVA 0 50 100 150 200 250 300 350 400 kVA
kVA at Ø 0,8 power factor kVA at Ø 0,8 power factor

Load rejection (SHUNT excitation) Load rejection (AREP or PMG excitation)

M3 M5 M3 M5
25% 25%

L6 L6
20 20
L9 L9

15 15
VL12 VL12

10 10

5 5

0 0
0 50 100 150 200 250 300 350 400 kVA 0 50 100 150 200 250 300 350 400 kVA
kVA at Ø 0,8 power factor kVA at Ø 0,8 power factor

Motor starting (SHUNT excitation) Motor starting (AREP or PMG excitation)

M3 M5 L6 L9 VL12 M3 M5 L6 L9 VL12
30% 30%

25 25

20 20

15 15

10 10

5 5

0 0
0 100 200 300 400 500 600 700 800 900 kVA 0 100 200 300 400 500 600 700 800 900 10001100kVA
kVA at Ø 0,6 power factor locked rotor kVA at Ø 0,6 power factor locked rotor

1) For a starting P.F. differing from 0,6 , the starting kVA must be multiplied by (Sine Ø /0,8)
2) For voltages other than 480V(Y), 277V( ), 240V(YY) at 60 Hz, then kVA must be multiplied by (480/U)2 or
(277/U)2 or (240/U)2

7
 LSA 46.2 - 4 Pole

3 phase short-circuit curves at no load and rated speed (star connection Y)

10000

Symmetrical
ÔÍß ìêòî Óí
Asymmetrical

1000

ßÎÛÐ ±® ÐÓÙ

100

ÍØËÒÌ

10
1 10 100 1000 10000 time (ms)

10000

ÔÍß ìêòî Óë Symmetrical

Asymmetrical

1000

ßÎÛÐ ±® ÐÓÙ

100

ÍØËÒÌ

10
1 10 100 1000 10000 time (ms)

10000

Symmetrical
ÔÍß ìêòî Ôê Asymmetrical

1000
ßÎÛÐ ±® ÐÓÙ

100

ÍØËÒÌ
10
1 10 100 1000 10000 time (ms)

Influence due to connexion.

Curves shown are for star connection (Y).
For other connections, use the following multiplication factors :
- Series delta : Current value x 1,732
- Parallel star : Current value x 2

8
 LSA 46.2 - 4 Pole

3 phase short-circuit curves at no load and rated speed (star connection Y)

10000

ÔÍß ìêòî Ôç Symmetrical

Asymmetrical
ßÎÛÐ ±® ÐÓÙ
1000

100

ÍØËÒÌ

10
1 10 100 1000 10000 time (ms)

10000

Symmetrical
ÔÍß ìêòî ÊÔïî
Asymmetrical
ßÎÛÐ ±® ÐÓÙ
1000

100

ÍØËÒÌ

10
1 10 100 1000 10000 time (ms)

Influence due to short-circuit.

Curves are based on a three-phase short-circuit.
For other types of short-circuit, use the following multiplication factors:

3 phase 2 phase L - L. 1 phase L - N.

Instantaneous (Max) 1 0,87 1,3
Sustained 1 1,5 2,2
Max sustained duration (AREP/ PMG) 10 sec. 5 sec. 2 sec.

9
 LSA 46.2 - 4 Pole

Single bearing dimensions

L
Access to terminals
LB
568
AH Xg 566 33 Access to regulator
CF
13

PMG optional

S DIA. Qty 12 as
shown on Ø M Ø 206
77

AIR 80
AIR OUTLET 2 holes INLET 235 457
185 Ø 21 170 527
6 Access to rotating diodes
6 C Y DIA, Qty X Eq. Sp. on Ø U.

Frame dimensions Coupling

TYPE L max without PMG LB Xg C Weight (kg) Flex plate 111/2 14
LSA 46.2 M3 973 920 460 429 585
LSA 46.2 M5 973 920 470 429 625 Flange S.A.E 3 X
LSA 46.2 L6 1083 1030 460 429 710 Flange S.A.E. 2 X
LSA 46.2 L9 1083 1030 485 429 775 Flange S.A.E 1 X X
LSA 46.2 VL12 1175 1130 530 525 895 Flange S.A.E. 1/2 X

Flange (mm) Flex plate (mm)

S.A.E. P N M S R CF S.A.E. BX U X Y AH
3 575*/623 409.575 428,625 11 345*/368 24*/17 11 1/2 352,42 333,38 8 11 39,6
2 575*/623 447,675 466,725 11 345*/368 24*/17 14 466,72 438,15 8 14 25,4
1 575*/623 511,175 530,225 12 345*/368 24*/17
1/2 651 584,2 619,125 14,5 382 17 * : dimensions LSA 46,2 M

Torsional analysis data

Xr

Ø 104(46.2 M)
Ø 106(46.2 L)
Lr

Gravity center : Xr (mm), Rotor length Lr (mm), Weight : M (kg), Moment of inertia : J (kgm 2) : (4J = MD2)
Flex plate S.A.E. 11 1/2 Flex plate S.A.E. 14
TYPE Xr Lr M J Xr Lr M J
LSA 46.2 M3 422 935 229 1,78 407 935 229,4 1,909
LSA 46.2 M5 434 935 245 1,948 419 935 245,3 2,077
LSA 46.2 L6 466 1045 278 2,329 451 1045 278,8 2,458
LSA 46.2 L9 485 1045 304,3 2,605 474 1045 304,9 2,724
LSA 46.2 VL12 540 1145 357 3,1 529 1145 357,6 3,216

10
 LSA 46.2 - 4 Pole

Two bearing dimensions

L
Access to terminals
LB 568
105 Xg 566 33 Access to regulator
20
1 hole M20x42

PMG optional

12

79,5
77

B 80
AIR OUTLET AIR 457
Access to
145 BB INLET rotating diodes 527
6 C 6 holes Ø 21 235
M10 DIA, Qty 12 Eq. as shown
on Ø 530,225

Frame dimensions
TYPE L max without PMG LB P C BB B R Xg Weight (kg)
LSA 46.2 M3 985 880 575 389 418 368 345 400 570
LSA 46.2 M5 985 880 575 389 418 368 345 410 615
LSA 46.2 L6 1095 990 623 389 418 368 368 430 705
LSA 46.2 L9 1095 990 623 389 418 368 368 455 770
LSA 46.2 VL12 1195 1090 623 485 610 560 368 500 885

Torsional analysis data

Xr

105

Ø 104(46.2 M)
Ø 106(46.2 L)
Lr

Gravity center : Xr (mm), Rotor length Lr (mm), Weight : M (kg), Moment of inertia : J (kgm 2) : (4J = MD2)
TYPE Xr Lr M J
LSA 46.2 M3 395 955 199,9 1,57
LSA 46.2 M5 404 955 215,8 1,738
LSA 46.2 L6 436 1065 247,6 2,109
LSA 46.2 L9 453 1065 273,7 2,385
LSA 46.2 VL12 502 1165 323,8 2,845

11
MOTEURS LEROY-SOMER 16015 ANGOULÊME CEDEX - FRANCE
338 567 258 RCS ANGOULÊME
S.A. au capital de 62 779 000 €

www.leroy-somer.com