E Translicer Cutter: Precision Slicing With Maximum Versatility

E TranSlicer® Cutter
Precision Slicing with Maximum Versatility
E TranSlicer® Cutter
APPLICATIONS OPERATING PRINCIPLE

Engineered to produce continuous precision slices with extensive Product is delivered onto two high speed feed belts [ 1 ] sloping together
detail given to key elements throughout the machine, the E TranSlicer to form a “V” shaped feed trough. The belts are synchronized with the
joins the production-proven TranSlicer series in the Urschel line-up. rotating slicing wheel [ 2 ] to ensure proper advance of product per
The E TranSlicer is ideally suited for elongated vegetables, fruits, and revolution of the wheel. Knives [ 3 ] under tension serve as spokes and
cooked meats. support the rim of the slicing wheel. The knives are slightly twisted to
The E TranSlicer accepts firm products up to 4" (101.6 mm) in create a uniform pitch from the hub to the rim. Knife pitch serves to pull
diameter and leafy-type, more compressible products up to 6" (152.4 product through the slicing wheel and produce a precise slice thickness.
mm) in diameter. Available hold-down assembly enables increased positive feeding if
needed. One slice is made at a time which prevents any crushing of the
A variety of interchangeable stainless steel cutting wheels offers product. The cut slices are then released into a sloped discharge chute
maximum versatility: slicing wheel, ¥patented MicroSlice® wheel, to reduce their speed before exiting the machine.
and julienne wheel. The machine features continuous operation for
uninterrupted production.
TYPES OF CUTS
Elements found throughout the design include:
• Stainless steel materials; machine is designed to fit easily into SLICING WHEELS
existing processing lines. Flat & Crinkle Slices: 1/32 to 3" (.8 to 76.2 mm)
• Available static and powered hold-down assemblies work with
Crinkle slices have 4-2/3 waves per inch and with a crinkle depth of
different feed belts to optimize the feeding of product.
1/16" (1.6 mm). Slicing wheels can be converted to crinkle slicing by
• Cutting wheel mount/holder assembly allows simple wheel
replacing the straight knives with crinkle knives and using a
changeovers.
different shear edge.
• Hinged/sliding panels offer full access to all key areas of the machine
for maintenance and washdowns. JULIENNE WHEELS: Julienne cuts ranging from 1/2
• Sloped surfaces throughout the machine including a self-draining x 1/2" (12.7 x 12.7 mm) to 2 x 2" (50.8 x 50.8 mm) are
frame ease cleaning. produced by using julienne knives on the slicing wheel.
• Sanitary design with all mechanical components completely separate MICROSLICE® WHEELS
from the food zone.
• Simple to use integrated electrical enclosure features circuit breakers Flat Slices: .020 to .240" (.5 to 6 mm)
instead of fuses and a brake motor button that releases the brake to Crinkle Slice: .069" (1.8 mm) thickness with 3-1/3 waves
facilitate maintenance. per inch and with a crinkle depth of .080" (2.0 mm)
• Electrical cables raised off of frame to allow simple washdowns and
Oval Shred: This shred has an oval-shaped cross section
alleviate trapped food particulates.
measuring approximately .125" (3.2 mm) thick by .250" (6.4
• Indicator lights on the electrical panel and guardlocks illuminate when
mm) wide.
guardlocks are properly engaged.
• Available across-the-line start or variable frequency drive. Julienne Strips: A wide range of julienne strips can be
• Durable stainless steel guardlocks and sensors. made from firm products. Contact your local representative for more
• Optional prep table to assist operators information.
• Optional remote operator stop button
If your product application is not mentioned on this page, contact your local
Urschel representative to determine the most effective solution to your size
reduction needs.
(over)
Urschel® E TranSlicer® Cutter Dimensional Drawing
SPECIFICATIONS
Length: .. . . . . . . . . . . . . . . . . . . 100.78" (2560 mm)
.. . . . . . . . . . . . . 117.26" (2978 mm) with prep table
Width: . . . . . . . . . . . . . . . . . . . . . . 35.31" (897 mm)
Height: . . . . . . . . . . . . . . . . . . . . 61.79" (1569 mm)
.. . . . . . . . . . . . 66.36" (1686 mm) with remote stop
Net Weight:.. . . . . . . . . . . . . . . . . . 1300 lb (560 kg)
Motor: . . . . . . . . . . . . . . . . . . . . . . . 3 HP (2.2 kW)
Feed Belt Motor: . . . . . . . . . . . . . . . . 1 HP (.75 kW)
You Are Invited to Test Cut Your Product

Urschel Laboratories has a complete network of test facilities and
experienced service and sales representatives around the world
ready to work for you on any size reduction application. Con-
tact your local Urschel Laboratories’ representative to schedule
a comprehensive, no-obligation test today at www.urschel.com.
‡Julienne knife is protected by U.S. Patent nos. 5896801 and 6460444. Shear edge is protected by U.S. Patent nos., 6792841, 6920813. ¥MicroSlice is protected by U.S.
Patents nos. 5992284, 6148702, 6148709, 7178440, 7721637, and EP1042107. ®TranSlicer, MicroSlice, and Urschel are registered trademarks of Urschel Laboratories, Inc.
L2550 September 2013 (s.s. L2365)

E Translicer Cutter: Precision Slicing With Maximum Versatility

Uploaded by

Copyright:

Available Formats

E Translicer Cutter: Precision Slicing With Maximum Versatility

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

E Translicer Cutter: Precision Slicing With Maximum Versatility

Uploaded by

Copyright:

Available Formats

E TranSlicer® Cutter

Precision Slicing with Maximum Versatility

APPLICATIONS OPERATING PRINCIPLE

You Are Invited to Test Cut Your Product

You might also like