Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,

ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 1 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Permanent Facility

1 ELECTRO- AC Current (50Hz to 1 A to 10 A 0.19% to 0.27% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

2 ELECTRO- AC Current (50Hz to 1 mA to 1 A 0.17% to 0.19% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

3 ELECTRO- AC Current (50Hz to 33 µA to 1 mA 0.43% to 0.17% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

4 ELECTRO- AC Voltage (50Hz to 100 mV to 1000 V 0.12% to 0.11% Using Fluke 8846A 6 ½
TECHNICAL- 10kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

5 ELECTRO- AC Voltage (50Hz to 1 mV to 100 mV 4.91% to 0.12% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

6 ELECTRO- Capacitance @ 1kHz 10 nF to 100 µF 2.6% to 2.6% Using Fluke 8846A 6 ½

TECHNICAL- DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 2 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
7 ELECTRO- Capacitance @ 1kHz 100 pF to 100 µF 0.40% to 0.59% Using L.C.R Meter By
TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

8 ELECTRO- Inductance @ 1kHz 1 mH to 10 H 0.66% to 0.37% Using L.C.R Meter By

TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

9 ELECTRO- AC Current (50Hz to 10 A to 20 A 0.15% to 0.41% Using MPC Fluke

TECHNICAL- 1kHz) 5502E By Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

10 ELECTRO- AC Current (50Hz to 20 A to 1000 A 1.51% to 1.73% Using MPC Fluke

TECHNICAL- 1kHz) 5502E With Current
ALTERNATING Coil By Direct Method
CURRENT (< 1 GHZ)
(Source)

11 ELECTRO- AC Current (50Hz to 30 µA to 10 A 0.55% to 0.16% Using MPC Fluke

TECHNICAL- 1kHz) 5502E By Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

12 ELECTRO- AC Voltage (50Hz to 1 mV to 1000 V 2.69% to 0.69% Using MPC Fluke

TECHNICAL- 10kHz) 5502E By Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 3 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
13 ELECTRO- Capacitance @ 1kHz 100 pF to 100 µF 0.43% to 0.43% Using Capacitance Box
TECHNICAL- By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

14 ELECTRO- Inductance @ 1kHz 10 µH to 10 H 1.20% to 1.20% Using Inductance Box

TECHNICAL- By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

15 ELECTRO- DC Current 1 µA to 1 mA 2.95% to 0.081% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

16 ELECTRO- DC Current 1 A to 10 A 0.503% to 0.19% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

17 ELECTRO- DC Current 1 mA to 1 A 0.081% to 0.503% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

18 ELECTRO- DC Voltage 1 mV to 100 mV 0.41% to 0.008% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

19 ELECTRO- DC Voltage 100 mV to 1000 V 0.008% to 0.006% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

20 ELECTRO- Resistance 1 ohm to 10 k ohm 0.36% to 0.013% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

21 ELECTRO- Resistance 10 k ohm to 10 M ohm 0.013% to 0.047% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 4 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
22 ELECTRO- Resistance 10 M ohm to 50 M ohm 0.047% to 0.95% Using Fluke 8846A 6 ½
TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

23 ELECTRO- Resistance 100µ ohm to 1ohm 7.5% to 7.5% Using Micro Ohm
TECHNICAL- DIRECT Meter By Direct Method
CURRENT (Measure)

24 ELECTRO- Resistance 20 M ohm to 20 G ohm 2.84% to 2.84% Using Million Mega

TECHNICAL- DIRECT Ohm Meter By Direct
CURRENT (Measure) Method

25 ELECTRO- Resistance 50 M Ohm to 1 G ohm 0.95% to 0.20% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

26 ELECTRO- DC Current 1 µA to 1 A 2.45% to 0.11% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

27 ELECTRO- DC Current 1 A to 10 A 0.11% to 0.09% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

28 ELECTRO- DC Current 10 A to 20 A 0.09% to 0.37% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

29 ELECTRO- DC Current 20 A to 1000 A 1.20% to 1.12% Using MPC Fluke

TECHNICAL- DIRECT 5502E With Current
CURRENT (Source) Coil By Direct Method

30 ELECTRO- DC Voltage 1 mV to 100 V 0.68% to 0.01% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

31 ELECTRO- DC Voltage 100 V to 1000 V 0.01% to 0.01% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 5 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
32 ELECTRO- Resistance 1 M ohm to 20 G ohm 6.5% to 6.65% Using Resistance
TECHNICAL- DIRECT Decade Box By Direct
CURRENT (Source) Method

33 ELECTRO- Resistance 1 ohm to 10 kohm 0.58% to 0.013% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

34 ELECTRO- Resistance 10 kohm to 50 Mohm 0.013% to 0.58% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

35 ELECTRO- Resistance 100 µ ohm to 10 kohm 0.62% to 0.59% Using Resistance Box
TECHNICAL- DIRECT By Direct Method
CURRENT (Source)

36 ELECTRO- Combination wave 1 kV to 10 kV 4% Using Digital Storage

TECHNICAL- Surge & Impulse Test Oscilloscope By Direct
ELECTRICAL SystemVoltage Method
EQUIPMENT amplitude with voltage
(Measure) divider probe

37 ELECTRO- Combination wave 1.2 µs (Rise time) to 50 5% Using Digital Storage

TECHNICAL- Surge & Impulse Test µs (Half time) Oscilloscope By Direct
ELECTRICAL SystemVoltage Rise & Method
EQUIPMENT Half Time with voltage
(Measure) divider probe

38 ELECTRO- Combination wave 10 µs (Rise time) to 5% Using Digital Storage

TECHNICAL- Surge & Impulse Test 700 µs (Half time) Oscilloscope By Direct
ELECTRICAL SystemVoltage Rise Method
EQUIPMENT time and half time with
(Measure) voltage divider probe

39 ELECTRO- Function 5 mV pk-pk to 6 V pk- 1.60% to 1.27% Using Digital Storage

TECHNICAL- GeneratorAmplitude pk Oscilloscope By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 6 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
40 ELECTRO- Function 500 kHz to 250 MHz 3.5% to 3.5% Using Digital Storage
TECHNICAL- GeneratorBandwidth Oscilloscope By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

41 ELECTRO- Function 20 ns to 0.5 s 1.8% to 1.8% Using Digital Storage

TECHNICAL- GeneratorTime Oscilloscope By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

42 ELECTRO- Power Factor 0.2 lag PF to 1.0 PF 3.95% to 4.55% Using Multifunction
TECHNICAL- Indicator By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

43 ELECTRO- Watt 100 (1.5A, 0.8lag, 90V, 2.2% to 1.5% Using Multifunction
TECHNICAL- 50Hz) W to 9 (30A, Indicator By Direct
ELECTRICAL Upf, 300V, 50Hz) kW Method
EQUIPMENT
(Measure)

44 ELECTRO- J- TypeThermocouple -210 °C to 1200 °C 0.30°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

45 ELECTRO- K- Type Thermocouple -200 °C to 1300 °C 0.52°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 7 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
46 ELECTRO- N- Type Thermocouple -200 °C to 1300 °C 0.47°C Using MPC Fluke
TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

47 ELECTRO- R- Type Thermocouple 0 °C to 1750 °C 0.96°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

48 ELECTRO- RTD Pt 100 -200 °C to 600 °C 0.48°C Using 6½ DMM Fluke

TECHNICAL- 8846A By Direct
TEMPERATURE Method
SIMULATION
(Measure)

49 ELECTRO- S- Type Thermocouple 0 °C to 1750 °C 0.96°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

50 ELECTRO- T- Type Thermocouple -200 °C to 400 °C 0.75°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

51 ELECTRO- J-Type Thermocouple -200 °C to 1200 °C 1.61°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

52 ELECTRO- J-Type Thermocouple -200 °C to 1200 °C 0.30°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 8 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
53 ELECTRO- K-Type Thermocouple -200 °C to 1300 °C 1.62°C Using Portable
TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

54 ELECTRO- K-Type Thermocouple -200 °C to 1350 °C 0.52°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

55 ELECTRO- N-Type Thermocouple -200 °C to 1300 °C 0.38°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

56 ELECTRO- N-Type Thermocouple -200 °C to 1300 °C 1.6°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

57 ELECTRO- RTD Pt 100 -200 °C to 800 °C 0.68°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

58 ELECTRO- RTD Pt 100 -200 °C to 800 °C 0.48°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

59 ELECTRO- R-Type Thermocouple 0 °C to 1750 °C 1.8°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

60 ELECTRO- R-Type Thermocouple 0 °C to 1750 °C 0.95°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 9 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
61 ELECTRO- S-Type Thermocouple 0 °C to 1750 °C 1.09°C Using MPC Fluke
TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

62 ELECTRO- S-Type Thermocouple 0 °C to 1750 °C 1.8°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

63 ELECTRO- T-Type Thermocouple -200 °C to 400 °C 1.21°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

64 ELECTRO- T-Type Thermocouple -200 °C to 400 °C 0.17°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

65 ELECTRO- Frequency @1V 10 Hz to 300 kHz 0.084% to 0.024% Using Fluke 8846A 6 ½
TECHNICAL- TIME & DMM By Direct Method
FREQUENCY
(Measure)

66 ELECTRO- Time 1 hrs. to 24 hrs. 1.5s to 23.4s Using Time Interval

TECHNICAL- TIME & Meter By Comparison
FREQUENCY Method
(Measure)

67 ELECTRO- Time 10 s to 1 hrs. 0.1s to 1.5s Using Time Interval

TECHNICAL- TIME & Meter By Comparison
FREQUENCY Method
(Measure)

68 ELECTRO- Frequency @ 1V 50 Hz to 1 MHz 0.012% to 0.010% Using MPC Fluke

TECHNICAL- TIME & 5502E By Direct
FREQUENCY (Source) Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 10 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
69 MECHANICAL- RPM indicator 100 RPM to 27000 1.81% to 0.63% Using Digital
ACCELERATION AND ,Centrifuge RPM Tachometer (Non-
SPEED Contact Type) By
Comparison Method

70 MECHANICAL- Tachometer 100 RPM to 2000 RPM 1.81% to 1.63% Using Digital
ACCELERATION AND Tachometer (Non-
SPEED Contact Type) By
Comparison Method

71 MECHANICAL- Tachometer 2000 RPM to 40000 1.63% Using Digital

ACCELERATION AND RPM Tachometer (Non-
SPEED Contact Type) By
Comparison Method

72 MECHANICAL- Caliper 0 mm to 300 mm 9.6µm Using Slip Gauge Set &

DIMENSION (BASIC (Vernier/Dial/Digital)L.C Caliper Checker By
MEASURING .: 0.01mm Comparison Method
INSTRUMENT,
GAUGE ETC.)

73 MECHANICAL- Caliper 300 mm to 600 mm 16.7µm Using Slip Gauge Set &
DIMENSION (BASIC (Vernier/Dial/Digital)L.C Caliper Checker By
MEASURING .: 0.01mm Comparison Method
INSTRUMENT,
GAUGE ETC.)

74 MECHANICAL- Coating Thickness 0 mm to 1 mm 3.3µm Using Master Foils by

DIMENSION (BASIC Gauge Comparison Method
MEASURING
INSTRUMENT,
GAUGE ETC.)

75 MECHANICAL- Depth Gauge 0 mm to 300 mm 9.7µm Using Slip Gauge &

DIMENSION (BASIC (Vernier/Dial/Digital)L.C Caliper Checker By
MEASURING : 0.01mm Comparison Method
INSTRUMENT,
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 11 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
76 MECHANICAL- Depth MicrometerL.C : 0 mm to 25 mm 8.81µm Using Slip Gauge Set,
DIMENSION (BASIC 0.01mm Slip Gauge
MEASURING Accessories By
INSTRUMENT, Comparison Method
GAUGE ETC.)

77 MECHANICAL- Dial Snap Gauge/Gap 0 mm to 100 mm 2.1µm Using Gauge Block Set
DIMENSION (BASIC Gauge By Comparison Method
MEASURING
INSTRUMENT,
GAUGE ETC.)

78 MECHANICAL- Extensometer up to 20 mm 11.6µm Using Extensometer

DIMENSION (BASIC Calibrator By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

79 MECHANICAL- External 0 mm to 25 mm 1.5µm Using Slip Gauge Set &

DIMENSION (BASIC MicrometerL.C: slip gauge accessories
MEASURING 0.001mm By Comparison Method
INSTRUMENT,
GAUGE ETC.)

80 MECHANICAL- External 0 mm to 200 mm 7.66µm Using Slip Gauge Set &

DIMENSION (BASIC MicrometerL.C: Slip Gauge
MEASURING 0.01mm Accessories By
INSTRUMENT, Comparison Method
GAUGE ETC.)

81 MECHANICAL- Feeler Gauge/Leaf 0 mm to 1 mm 2.0µm Using External

DIMENSION (BASIC Gauge Micrometer By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 12 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
82 MECHANICAL- Flush Pin Gauge up to 20 mm 2.5µm Using Comparator
DIMENSION (BASIC Stand, Slip Gauge &
MEASURING Dial Gauge By
INSTRUMENT, Comparison Method
GAUGE ETC.)

83 MECHANICAL- Foil (Coating Thickness up to 1 mm 1.6µm Using Digital Dial

DIMENSION (BASIC Gauge) Gauge & Comparator
MEASURING Stand By Comparison
INSTRUMENT, Method
GAUGE ETC.)

84 MECHANICAL- Height Gauge 0 µm to 600 mm 12.24µm Using Slip Gauge Set,

DIMENSION (BASIC (Vernier/Dial/Digital)L.C Using Caliper Checker
MEASURING : 0.01mm By Comparison Method
INSTRUMENT,
GAUGE ETC.)

85 MECHANICAL- Inclinometer/Clinomete 0 ° to 90 ° 0.067° Using Slip Gauge,

DIMENSION (BASIC r Surface Plate & Sine
MEASURING Bar By Comparison
INSTRUMENT, Method
GAUGE ETC.)

86 MECHANICAL- Inside Dial CaliperL.C : 18 mm to 150 mm 8.7µm Using Slip Gauge Set,
DIMENSION (BASIC 0.01mm Caliper Checker & Slip
MEASURING Gauge Accessories
INSTRUMENT,
GAUGE ETC.)

87 MECHANICAL- Lever Type Dial 0 mm to 0.8 mm 8.7µm Using Slip Gauge Set &
DIMENSION (BASIC GaugeL.C : 0.01mm Comparator Stand
MEASURING
INSTRUMENT,
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 13 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
88 MECHANICAL- Measuring Scale 0 mm to 1000 mm 118µm / meter Using Measuring Scale
DIMENSION (BASIC & Tape Calibrator By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

89 MECHANICAL- Measuring Tape/Pie 0 m to 50 m 127µm / meter Using Measuring Scale

DIMENSION (BASIC Tape & Tape Calibrator By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

90 MECHANICAL- Micrometer Setting 0 mm to 300 mm 4.1µm Using Comparator

DIMENSION (BASIC Rod/Length Bar Stand, Slip Gauge &
MEASURING Dial Gauge By
INSTRUMENT, Comparison Method
GAUGE ETC.)

91 MECHANICAL- Plain Plug Gauge/O.D 0 mm to 100 mm 2.1µm Using Comparator

DIMENSION (BASIC Master Stand, Slip Gauge &
MEASURING Dial Gauge By
INSTRUMENT, Comparison Method
GAUGE ETC.)

92 MECHANICAL- Plunger Type Dial 0 mm to 12.7 mm 1.5µm Using Slip Gauge Set &
DIMENSION (BASIC Gauge Comparator Stand By
MEASURING (Analog/Digital)L.C : Comparison Method
INSTRUMENT, 0.001mm
GAUGE ETC.)

93 MECHANICAL- Plunger Type Dial 12.7 mm to 25 mm 6.5µm Using Slip Gauge Set &
DIMENSION (BASIC Gauge Comparator Stand By
MEASURING (Analog/Digital)L.C : Comparison Method
INSTRUMENT, 0.01mm
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 14 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
94 MECHANICAL- Surface Roughness 0 to Ra 6.3 µm 8.1% Using Master specimen
DIMENSION (BASIC Tester By Comparison Method
MEASURING
INSTRUMENT,
GAUGE ETC.)

95 MECHANICAL- Test Sieve 0.045 mm to 4 mm 3.1µm Using Profile Projector

DIMENSION (BASIC & Vernier Caliper By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

96 MECHANICAL- Test Sieve 4 mm to 100 mm 24µm Using Profile Projector

DIMENSION (BASIC & Vernier Caliper By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

97 MECHANICAL- Thickness 0 mm to 10 mm 2.1µm Using Slip Gauge Set

DIMENSION (BASIC Gauge(Dial/Digital)L.C By Comparison Method
MEASURING : 0.01mm
INSTRUMENT,
GAUGE ETC.)

98 MECHANICAL- Universal/Bevel 0 ° to 90 ° 0.051° Using Slip Gauge,

DIMENSION (BASIC Protector/Combination Surface Plate & Sine
MEASURING Set L.C 5' Bar By Comparison
INSTRUMENT, Method
GAUGE ETC.)

99 MECHANICAL- Hydraulic pressure 0 bar to 700 bar 0.41bar Using Digital Pressure
PRESSURE (Digital/Analogue Gauge , Vacuum Hand
INDICATING DEVICES Pressure Pump & Multimeter By
Gauge/Pressure Comparison Method as
Transmitter/Pressure Per DKD R6-1
Switch)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 15 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
100 MECHANICAL- Low 0 mbar to 10 mbar 0.15mbar Using Low Pressure
PRESSURE Pressure(Barometer, Calibrator By
INDICATING DEVICES Magnehelic Gauge) Comparison Method

101 MECHANICAL- Pneumatic Negative -0.9 bar to 0 bar 0.04bar Using Digital Pressure
PRESSURE Pressure Gauge , Vacuum Hand
INDICATING DEVICES (Digital/Analogue Pump & Multimeter By
Pressure Comparison Method as
Gauge/Pressure Per DKD R6-2
Transmitter/Pressure
Switch etc.)

102 MECHANICAL- Pneumatic Pressure 0 bar to 20 bar 0.05bar Using Digital Pressure
PRESSURE (Digital/Analogue Gauge , Vacuum Hand
INDICATING DEVICES Pressure Pump & Multimeter By
Gauge/Pressure Comparison Method as
Transmitter/Pressure Per DKD R6-1
Switch etc.)

103 MECHANICAL- UTM, Static Uniaxial Testing 50 N to 3000 kN 0.80% Force Proving
TENSION CREEP Machines-Compression Instruments based on
AND TORSION Mode IS 1828-1:2015
TESTING MACHINE

104 MECHANICAL- UTM, Static Uniaxial Testing 50 N to 10 kN 0.79% Force Proving

TENSION CREEP Machines-Tension Instruments based on
AND TORSION Mode IS 1828-1:2015
TESTING MACHINE

105 MECHANICAL- F2 Class & Coarser 1g 0.10mg Using standard Weight

WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 16 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
106 MECHANICAL- F2 Class & Coarser 10 g 0.20mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

107 MECHANICAL- F2 Class & Coarser 100 g 0.30mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

108 MECHANICAL- F2 Class & Coarser 2g 0.10mg Using standard Weight

WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

109 MECHANICAL- F2 Class & Coarser 20 g 0.30mg Using standard Weight

WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

110 MECHANICAL- F2 Class & Coarser 200 g 0.30mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

111 MECHANICAL- F2 Class & Coarser 5g 0.20mg Using standard Weight

WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 17 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
112 MECHANICAL- F2 Class & Coarser 50 g 0.30mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

113 MECHANICAL- F2 Class & Coarser 500 mg 0.10mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

114 MECHANICAL- M1 Class & Coarser 1 kg 10.20mg Using standard Weight

WEIGHTS of accuracy class F2
and Electronic Balance
L.C. 0.01g As per OIML
R-111-1

115 MECHANICAL- M1 Class & Coarser 10 mg 0.10mg Using standard Weight

WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

116 MECHANICAL- M1 Class & Coarser 100 mg 0.14mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

117 MECHANICAL- M1 Class & Coarser 2 kg 13.34mg Using standard Weight

WEIGHTS of accuracy class F2
and Electronic Balance
L.C. 0.01g As per OIML
R-111-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 18 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
118 MECHANICAL- M1 Class & Coarser 20 mg 0.10mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

119 MECHANICAL- M1 Class & Coarser 200 mg 0.14mg Using standard Weight
WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

120 MECHANICAL- M1 Class & Coarser 50 mg 0.10mg Using standard Weight

WEIGHTS of accuracy class E2
and Analytical Balance
L.C. 0.0001 g As per
OIML R-111-1

121 MECHANICAL- M1 Class & Coarser 500 g 7.12mg Using standard Weight
WEIGHTS of accuracy class F2
and Electronic Balance
L.C. 0.01g As per OIML
R-111-1

122 MECHANICAL- M2 Class & Coarser 10 kg 0.58g Using standard Weight

WEIGHTS of accuracy class F2
and Electronics
Balance L.C. 1g As per
OIML R-111-1

123 MECHANICAL- M2 Class & Coarser 20 kg 0.59g Using standard Weight

WEIGHTS of accuracy class F2
and Electronics
Balance L.C. 1g As per
OIML R-111-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 19 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
124 MECHANICAL- M2 Class & Coarser 5 kg 0.58g Using standard Weight
WEIGHTS of accuracy class F2
and Electronics
Balance L.C. 1g As per
OIML R-111-1

125 THERMAL- SPECIFIC Humidity meter,thermo 20 %RH to 95 2.0%RH Using digital thermo
HEAT & HUMIDITY hygrometer with %RH@25°C hygrometer with
external or inbuilt sensor& humidity and
sensor temperature controlled
chamber chamber By
Comparison Method

126 THERMAL- SPECIFIC RH Indicator of 20 %RH to 95 2.0%RH Using digital thermo

HEAT & HUMIDITY Conditioning Chamber/ %RH@25°C hygrometer with sensor
Humidity chambers Direct Method

127 THERMAL- SPECIFIC Temperature Indicator 10 °C to 50 °C @ 50 % 1.0°C Using digital thermo

HEAT & HUMIDITY of Conditioning RH hygrometer with sensor
Chamber / Humidity Direct Method
Chambers

128 THERMAL- SPECIFIC Temperature Indicator 10 °C to 50 °C @ 50 % 1.0°C Using digital thermo

HEAT & HUMIDITY of Humidity RH hygrometer with
Meter,Thermo- sensor& humidity and
hygrometer with temperature controlled
external or inbuilt chamber chamber By
sensor Comparison Method

129 THERMAL- Freezer, Ovens, -30 °C to 300 °C 2.5°C Using Temperature

TEMPERATURE Incubators(Industrial Data Logger with multi
purpose only), Thermocouples/RTDs
Environmental By Direct Method (
Chamber Liquid bath Multi Position )

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 20 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
130 THERMAL- Liquid in 50 °C to 250 °C 1.22°C Using RTD (Pt 100) 4
TEMPERATURE glassthermometer, wire with 6 ½ DMM By
temperature gauge, Comparison Method
dial thermometer Using Liquid Bath As
per NABL 124 & ITS 90

131 THERMAL- Liquid in -80 °C to 50 °C 0.64°C Using RTD (Pt 100) 4

TEMPERATURE glassthermometer, wire with 6 ½ DMM By
temperature gauge, Comparison Method
dial thermometer Using low Temperature
Liquid Bath

132 THERMAL- RTD, Thermocouple 400 °C to 1200 °C 4.2°C Using RTD (Pt 100) 4
TEMPERATURE (with or without wire & S- type
Indicator) thermocouple with 6 ½
DMM By Comparison
Method Using Dry Bath

133 THERMAL- RTD, Thermocouple -80 °C to 400 °C 0.66°C Using RTD (Pt 100) 4
TEMPERATURE (with or without wire with 6 ½ DMM By
Indicator), Temperature Comparison Method
Indicator

134 THERMAL- Temperature Indicator -80 °C to 400 °C 0.40°C Using RTD (pt 100) 4
TEMPERATURE of Cold Chambers, wire with 6 ½ DMM By
Ovens, Comparison
Incubators(Industrial Method(Single Position
purpose only), )
Furnaces, Baths

135 THERMAL- Temperature Indicator 400 °C to 1500 °C 5.5°C Using S- type

TEMPERATURE of Furnaces thermocouple with 6 ½
DMM By Comparison
Method(Single Position
)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 21 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

1 ELECTRO- AC Current (50Hz to 1 A to 10 A 0.19% to 0.27% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

2 ELECTRO- AC Current (50Hz to 1 mA to 1 A 0.17% to 0.19% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

3 ELECTRO- AC Current (50Hz to 33 µA to 1 mA 0.43% to 0.17% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

4 ELECTRO- AC High Current @ 10 A to 400 A 4.27% to 1.20% Using Fluke 8846A 6 ½

TECHNICAL- 50Hz DMM with Current
ALTERNATING Transformer (1000:5A)
CURRENT (< 1 GHZ) By Direct Method
(Measure)

5 ELECTRO- AC Voltage (50Hz to 100 mV to 1000 V 0.12% to 0.11% Using Fluke 8846A 6 ½
TECHNICAL- 10kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

6 ELECTRO- AC Voltage (50Hz to 1 mV to 100 mV 4.91% to 0.12% Using Fluke 8846A 6 ½

TECHNICAL- 1kHz) DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 22 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
7 ELECTRO- Capacitance @ 1kHz 10 nF to 100 µF 2.6% to 2.6% Using Fluke 8846A 6 ½
TECHNICAL- DMM By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

8 ELECTRO- Capacitance @ 1kHz 100 pF to 100 µF 0.40% to 0.59% Using L.C.R Meter By
TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

9 ELECTRO- Inductance @ 1kHz 1 mH to 10 H 0.66% to 0.37% Using L.C.R Meter By

TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)

10 ELECTRO- AC Current (50Hz to 10 A to 20 A 0.15% to 0.41% Using MPC Fluke

TECHNICAL- 1kHz) 5502E By Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

11 ELECTRO- AC Current (50Hz to 20 A to 1000 A 1.51% to 1.73% Using MPC Fluke

TECHNICAL- 1kHz) 5502E With Current
ALTERNATING Coil By Direct Method
CURRENT (< 1 GHZ)
(Source)

12 ELECTRO- AC Current (50Hz to 30 µA to 10 A 0.55% to 0.16% Using MPC Fluke

TECHNICAL- 1kHz) 5502E By Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 23 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
13 ELECTRO- AC Voltage (50Hz to 1 mV to 1000 V 2.69% to 0.69% Using MPC Fluke
TECHNICAL- 10kHz) 5502E By Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

14 ELECTRO- Capacitance @ 1kHz 100 pF to 100 µF 0.43% to 0.43% Using Capacitance Box
TECHNICAL- By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

15 ELECTRO- Inductance @ 1kHz 10 µH to 10 H 1.20% to 1.20% Using Inductance Box

TECHNICAL- By Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

16 ELECTRO- DC Current 1 µA to 1 mA 2.95% to 0.081% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

17 ELECTRO- DC Current 1 A to 10 A 0.503% to 0.19% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

18 ELECTRO- DC Current 1 mA to 1 A 0.081% to 0.503% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

19 ELECTRO- DC High Current 10 A to 265 A 1.50% to 1.51% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM with Shunt
CURRENT (Measure) (400A/75mV) By Direct
Method

20 ELECTRO- DC Voltage 1 mV to 100 mV 0.41% to 0.008% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 24 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
21 ELECTRO- DC Voltage 100 mV to 1000 V 0.008% to 0.006% Using Fluke 8846A 6 ½
TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

22 ELECTRO- Resistance 1 ohm to 10 k ohm 0.36% to 0.013% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

23 ELECTRO- Resistance 10 k ohm to 10 M ohm 0.013% to 0.047% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

24 ELECTRO- Resistance 10 M ohm to 50 M ohm 0.047% to 0.95% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

25 ELECTRO- Resistance 100µ ohm to 1ohm 7.5% to 7.5% Using Micro Ohm
TECHNICAL- DIRECT Meter By Direct Method
CURRENT (Measure)

26 ELECTRO- Resistance 50 M Ohm to 1 G ohm 0.95% to 0.20% Using Fluke 8846A 6 ½

TECHNICAL- DIRECT DMM By Direct Method
CURRENT (Measure)

27 ELECTRO- DC Current 1 µA to 1 A 2.45% to 0.11% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

28 ELECTRO- DC Current 1 A to 10 A 0.11% to 0.09% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

29 ELECTRO- DC Current 10 A to 20 A 0.09% to 0.37% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

30 ELECTRO- DC Current 20 A to 1000 A 1.20% to 1.12% Using MPC Fluke

TECHNICAL- DIRECT 5502E With Current
CURRENT (Source) Coil By Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 25 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
31 ELECTRO- DC Voltage 1 mV to 100 V 0.68% to 0.01% Using MPC Fluke
TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

32 ELECTRO- DC Voltage 100 V to 1000 V 0.01% to 0.01% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

33 ELECTRO- Resistance 1 M ohm to 20 G ohm 6.5% to 6.65% Using Resistance

TECHNICAL- DIRECT Decade Box By Direct
CURRENT (Source) Method

34 ELECTRO- Resistance 1 ohm to 10 kohm 0.58% to 0.013% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

35 ELECTRO- Resistance 10 kohm to 50 Mohm 0.013% to 0.58% Using MPC Fluke

TECHNICAL- DIRECT 5502E By Direct
CURRENT (Source) Method

36 ELECTRO- Resistance 100 µ ohm to 10 kohm 0.62% to 0.59% Using Resistance Box
TECHNICAL- DIRECT By Direct Method
CURRENT (Source)

37 ELECTRO- AC High Voltage @ 1 kV to 40 kV 7.64% to 7.64% Using Multimeter with

TECHNICAL- 50Hz High Voltage Probe By
ELECTRICAL Direct Method
EQUIPMENT
(Measure)

38 ELECTRO- Combination wave 1 kV to 10 kV 4% Using Digital Storage

TECHNICAL- Surge & Impulse Test Oscilloscope By Direct
ELECTRICAL SystemVoltage Method
EQUIPMENT amplitude with voltage
(Measure) divider probe

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 26 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
39 ELECTRO- Combination wave 1.2 µs (Rise time) to 50 5% Using Digital Storage
TECHNICAL- Surge & Impulse Test µs (Half time) Oscilloscope By Direct
ELECTRICAL SystemVoltage Rise & Method
EQUIPMENT Half Time with voltage
(Measure) divider probe

40 ELECTRO- Combination wave 10 µs (Rise time) to 5% Using Digital Storage

TECHNICAL- Surge & Impulse Test 700 µs (Half time) Oscilloscope By Direct
ELECTRICAL SystemVoltage Rise Method
EQUIPMENT time and half time with
(Measure) voltage divider probe

41 ELECTRO- DC High Voltage 1 kV to 10 kV 6.68% Using Multimeter with

TECHNICAL- High Voltage Probe By
ELECTRICAL Direct Method
EQUIPMENT
(Measure)

42 ELECTRO- Function 5 mV pk-pk to 6 V pk- 1.60% to 1.27% Using Digital Storage

TECHNICAL- GeneratorAmplitude pk Oscilloscope By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

43 ELECTRO- Function 500 kHz to 250 MHz 3.5% to 3.5% Using Digital Storage
TECHNICAL- GeneratorBandwidth Oscilloscope By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

44 ELECTRO- Function 20 ns to 0.5 s 1.8% to 1.8% Using Digital Storage

TECHNICAL- GeneratorTime Oscilloscope By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 27 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
45 ELECTRO- Power Factor 0.2 lag PF to 1.0 PF 3.95% to 4.55% Using Multifunction
TECHNICAL- Indicator By Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

46 ELECTRO- Watt 100 (1.5A, 0.8lag, 90V, 2.2% to 1.5% Using Multifunction
TECHNICAL- 50Hz) W to 9 (30A, Indicator By Direct
ELECTRICAL Upf, 300V, 50Hz) kW Method
EQUIPMENT
(Measure)

47 ELECTRO- J- TypeThermocouple -210 °C to 1200 °C 0.30°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

48 ELECTRO- K- Type Thermocouple -200 °C to 1300 °C 0.52°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

49 ELECTRO- N- Type Thermocouple -200 °C to 1300 °C 0.47°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

50 ELECTRO- R- Type Thermocouple 0 °C to 1750 °C 0.96°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 28 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
51 ELECTRO- RTD Pt 100 -200 °C to 600 °C 0.48°C Using 6½ DMM Fluke
TECHNICAL- 8846A By Direct
TEMPERATURE Method
SIMULATION
(Measure)

52 ELECTRO- S- Type Thermocouple 0 °C to 1750 °C 0.96°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

53 ELECTRO- T- Type Thermocouple -200 °C to 400 °C 0.75°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION
(Measure)

54 ELECTRO- J-Type Thermocouple -200 °C to 1200 °C 1.61°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

55 ELECTRO- J-Type Thermocouple -200 °C to 1200 °C 0.30°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

56 ELECTRO- K-Type Thermocouple -200 °C to 1300 °C 1.62°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

57 ELECTRO- K-Type Thermocouple -200 °C to 1350 °C 0.52°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 29 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
58 ELECTRO- N-Type Thermocouple -200 °C to 1300 °C 0.38°C Using MPC Fluke
TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

59 ELECTRO- N-Type Thermocouple -200 °C to 1300 °C 1.6°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

60 ELECTRO- RTD Pt 100 -200 °C to 800 °C 0.68°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

61 ELECTRO- RTD Pt 100 -200 °C to 800 °C 0.48°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

62 ELECTRO- R-Type Thermocouple 0 °C to 1750 °C 1.8°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

63 ELECTRO- R-Type Thermocouple 0 °C to 1750 °C 0.95°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

64 ELECTRO- S-Type Thermocouple 0 °C to 1750 °C 1.09°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

65 ELECTRO- S-Type Thermocouple 0 °C to 1750 °C 1.8°C Using Portable

TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 30 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
66 ELECTRO- T-Type Thermocouple -200 °C to 400 °C 1.21°C Using Portable
TECHNICAL- Universal Calibrator By
TEMPERATURE Direct Method
SIMULATION (Source)

67 ELECTRO- T-Type Thermocouple -200 °C to 400 °C 0.17°C Using MPC Fluke

TECHNICAL- 5502E By Direct
TEMPERATURE Method
SIMULATION (Source)

68 ELECTRO- Frequency @1V 10 Hz to 300 kHz 0.084% to 0.024% Using Fluke 8846A 6 ½
TECHNICAL- TIME & DMM By Direct Method
FREQUENCY
(Measure)

69 ELECTRO- Time 1 hrs. to 24 hrs. 1.5s to 23.4s Using Time Interval

TECHNICAL- TIME & Meter By Comparison
FREQUENCY Method
(Measure)

70 ELECTRO- Time 10 s to 1 hrs. 0.1s to 1.5s Using Time Interval

TECHNICAL- TIME & Meter By Comparison
FREQUENCY Method
(Measure)

71 ELECTRO- Frequency @ 1V 50 Hz to 1 MHz 0.012% to 0.010% Using MPC Fluke

TECHNICAL- TIME & 5502E By Direct
FREQUENCY (Source) Method

72 MECHANICAL- RPM indicator 100 RPM to 27000 1.81% to 0.63% Using Digital
ACCELERATION AND ,Centrifuge RPM Tachometer (Non-
SPEED Contact Type) By
Comparison Method

73 MECHANICAL- Extensometer up to 20 mm 11.6µm Using Extensometer

DIMENSION (BASIC Calibrator By
MEASURING Comparison Method
INSTRUMENT,
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 31 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
74 MECHANICAL- Height Gauge 0 µm to 600 mm 12.24µm Using Slip Gauge Set,
DIMENSION (BASIC (Vernier/Dial/Digital)L.C Using Caliper Checker
MEASURING : 0.01mm By Comparison Method
INSTRUMENT,
GAUGE ETC.)

75 MECHANICAL- Brinnel Hardness HBW 2.5/187.5 2.5% Using Reference

HARDNESS TESTING Tester Blocks based on IS
MACHINES 1500-2

76 MECHANICAL- Rockwell Hardness HRBW 1.4HRBW Using Reference

HARDNESS TESTING Tester Blocks based on IS
MACHINES 1586-2

77 MECHANICAL- Rockwell Hardness HRC 1.2HRC Using Reference

HARDNESS TESTING Tester Blocks based on IS
MACHINES 1586-2

78 MECHANICAL- Vicker Hardness Tester HV10 2.5% Using Reference

HARDNESS TESTING Blocks based on IS
MACHINES 1501-2

79 MECHANICAL- Vicker Hardness Tester HV30 2.5% Using Reference

HARDNESS TESTING Blocks based on IS
MACHINES 1501-2

80 MECHANICAL- Hydraulic pressure 0 bar to 700 bar 0.41bar Using Digital Pressure
PRESSURE (Digital/Analogue Gauge , Vacuum Hand
INDICATING DEVICES Pressure Pump & Multimeter By
Gauge/Pressure Comparison Method as
Transmitter/Pressure Per DKD R6-1
Switch)

81 MECHANICAL- Low 0 mbar to 10 mbar 0.15mbar Using Low Pressure

PRESSURE Pressure(Barometer, Calibrator By
INDICATING DEVICES Magnehelic Gauge) Comparison Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 32 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
82 MECHANICAL- Pneumatic Negative -0.9 bar to 0 bar 0.04bar Using Digital Pressure
PRESSURE Pressure Gauge , Vacuum Hand
INDICATING DEVICES (Digital/Analogue Pump & Multimeter By
Pressure Comparison Method as
Gauge/Pressure Per DKD R6-2
Transmitter/Pressure
Switch etc.)

83 MECHANICAL- Pneumatic Pressure 0 bar to 20 bar 0.05bar Using Digital Pressure

PRESSURE (Digital/Analogue Gauge , Vacuum Hand
INDICATING DEVICES Pressure Pump & Multimeter By
Gauge/Pressure Comparison Method as
Transmitter/Pressure Per DKD R6-1
Switch etc.)

84 MECHANICAL- UTM, Static Uniaxial Testing 50 N to 3000 kN 0.80% Force Proving

TENSION CREEP Machines-Compression Instruments based on
AND TORSION Mode IS 1828-1:2015
TESTING MACHINE

85 MECHANICAL- UTM, Static Uniaxial Testing 50 N to 10 kN 0.79% Force Proving

TENSION CREEP Machines-Tension Instruments based on
AND TORSION Mode IS 1828-1:2015
TESTING MACHINE

86 MECHANICAL- UTM, Verification Of Cross 0 mm to 500 mm 0.2mm Using Liner Scale with
TENSION CREEP Head Of Uniaxial DRO as per ASTM E
AND TORSION Testing Machine Force 2309
TESTING MACHINE Displacement

87 MECHANICAL- UTM, Verification Of Speed 0 mm/min to 500 1.1% Using Displacement

TENSION CREEP Of Cross Head Of mm/min Calibrator And Stop
AND TORSION Uniaxial Testing Watch as per ASTM E
TESTING MACHINE Machine 2658

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 33 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
88 MECHANICAL- Weighing 0 to 200 g 0.14mg Using standard Weight
WEIGHING SCALE BalanceReadability = of E2 As per OIML R-
AND BALANCE 0.1 mg 76-1 Weighing balance
of accuracy class I and
coarser

89 MECHANICAL- Weighing upto 3 kg 16.2mg Using standard Weight

WEIGHING SCALE BalanceReadability = of F2 As per OIML R-
AND BALANCE 0.01 g 76-1 Weighing balance
of accuracy class II and
Coarser

90 MECHANICAL- Weighing 0 to 60 kg 1.7g Using standard Weight

WEIGHING SCALE BalanceReadability = 1 of F2 Class As per
AND BALANCE g OIML R-76-1 Weighing
balance of accuracy
class III and coarser

91 THERMAL- SPECIFIC RH Indicator of 20 %RH to 95 2.0%RH Using digital thermo

HEAT & HUMIDITY Conditioning Chamber/ %RH@25°C hygrometer with sensor
Humidity chambers Direct Method

92 THERMAL- SPECIFIC Temperature Indicator 10 °C to 50 °C @ 50 % 1.0°C Using digital thermo

HEAT & HUMIDITY of Conditioning RH hygrometer with sensor
Chamber / Humidity Direct Method
Chambers

93 THERMAL- Freezer, Ovens, -30 °C to 300 °C 2.5°C Using Temperature

TEMPERATURE Incubators(Industrial Data Logger with multi
purpose only), Thermocouples/RTDs
Environmental By Direct Method (
Chamber Liquid bath Multi Position )

94 THERMAL- RTD, Thermocouple 400 °C to 1200 °C 4.2°C Using RTD (Pt 100) 4
TEMPERATURE (with or without wire & S- type
Indicator) thermocouple with 6 ½
DMM By Comparison
Method Using Dry Bath

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name KAILTECH TEST AND RESEARCH CENTRE PRIVATE LIMITED, 141-C,
ELECTRONIC COMPLEX, INDORE, MADHYA PRADESH , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2348 Page No. : 34 / 34

Validity 18/08/2019 to 17/08/2021 Last Amended on 28/08/2019

S.No Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
95 THERMAL- RTD, Thermocouple -80 °C to 400 °C 0.66°C Using RTD (Pt 100) 4
TEMPERATURE (with or without wire with 6 ½ DMM By
Indicator), Temperature Comparison Method
Indicator

96 THERMAL- Temperature Indicator -80 °C to 400 °C 0.40°C Using RTD (pt 100) 4
TEMPERATURE of Cold Chambers, wire with 6 ½ DMM By
Ovens, Comparison
Incubators(Industrial Method(Single Position
purpose only), )
Furnaces, Baths

97 THERMAL- Temperature Indicator 400 °C to 1500 °C 5.5°C Using S- type

TEMPERATURE of Furnaces thermocouple with 6 ½
DMM By Comparison
Method(Single Position
)

This is annexure to 'Certificate of Accreditation' and does not require any signature.