Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Miniature PMDC Motor

    Uploaded by

    aselabollegala
    This document provides specifications for a miniature PMDC motor that operates at 3V DC. The motor has a rated speed of 12400 rpm under load and draws 1.5A maximum current. It provides 10g-cm of torque and 1.23W of output power. The motor has a shaft runout of 0.02mm or less and an end play between 0.05mm to 0.45mm. Dimensions and a diagram of the motor are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Miniature PMDC Motor

    Uploaded by

    aselabollegala
    36 views1 page
    This document provides specifications for a miniature PMDC motor that operates at 3V DC. The motor has a rated speed of 12400 rpm under load and draws 1.5A maximum current. It provides 10g-cm of torque and 1.23W of output power. The motor has a shaft runout of 0.02mm or less and an end play between 0.05mm to 0.45mm. Dimensions and a diagram of the motor are also included.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a miniature PMDC motor that operates at 3V DC. The motor has a rated speed of 12400 rpm under load and draws 1.5A maximum current. It provides 10g-cm of torque and 1.23W of output power. The motor has a shaft runout of 0.02mm or less and an end play between 0.05mm to 0.45mm. Dimensions and a diagram of the motor are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    Miniature PMDC Motor

    Uploaded by

    aselabollegala
    This document provides specifications for a miniature PMDC motor that operates at 3V DC. The motor has a rated speed of 12400 rpm under load and draws 1.5A maximum current. It provides 10g-cm of torque and 1.23W of output power. The motor has a shaft runout of 0.02mm or less and an end play between 0.05mm to 0.45mm. Dimensions and a diagram of the motor are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Miniature PMDC Motor

    Specifications
    Standard Operating Conditions
    Rated Voltage : 3V DC
    Direction of Rotation : CWW
    Electrical Characteristics (at initial stage after 30 seconds run-in)
    No Load Current : 0.4A Max.
    No Load Speed : 16000 ±10%rpm
    Rated Load : 11.9 g.cm (tested with fan)
    Rated Current : 1.5A Max.
    Rated Speed : 12400 ±8%rpm
    Noise : 30cm ≤68dB
    Torque : 10 g-cm
    Output Watts : 1.23W
    Mechanical Characteristics
    End Play : 0.05mm to 0.45mm
    Runout of shaft extension : 0.02mm Max.

    Diagram

    Dimensions : Millimetres

    Part Number Table


    Description Part Number
    Miniature Permanent Magnet DC Motor, 3V DC MM10

    Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for
    the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
    without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,
    any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make
    any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or
    where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its
    negligence. Multicomp is the registered trademark of Premier Farnell Limited 2019.

    Newark.com/exclusive-brands
    Farnell.com/exclusive-brands
    Element14.com/exclusive-brands

    Page <1> 24/06/19 V1.0

    You might also like