Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 87 views

    KMF1 FZ354

    Uploaded by

    Andrew Setiawan
    The cable sheath fault receiver KMF 1 is used to locate sheath faults along cable routes using the step voltage method. It can follow cable routes using two removable earth probes and locate multiple successive faults powered by a 9V battery. It has features like zero point compensation, amplification selection, battery testing, and direction indication by a moving coil instrument to accurately locate cable sheath faults.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    KMF1 FZ354

    Uploaded by

    Andrew Setiawan
    87 views2 pages
    The cable sheath fault receiver KMF 1 is used to locate sheath faults along cable routes using the step voltage method. It can follow cable routes using two removable earth probes and locate multiple successive faults powered by a 9V battery. It has features like zero point compensation, amplification selection, battery testing, and direction indication by a moving coil instrument to accurately locate cable sheath faults.

    Original Title

    KMF1-FZ354

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The cable sheath fault receiver KMF 1 is used to locate sheath faults along cable routes using the step voltage method. It can follow cable routes using two removable earth probes and locate multiple successive faults powered by a 9V battery. It has features like zero point compensation, amplification selection, battery testing, and direction indication by a moving coil instrument to accurately locate cable sheath faults.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    87 views2 pages

    KMF1 FZ354

    Uploaded by

    Andrew Setiawan
    The cable sheath fault receiver KMF 1 is used to locate sheath faults along cable routes using the step voltage method. It can follow cable routes using two removable earth probes and locate multiple successive faults powered by a 9V battery. It has features like zero point compensation, amplification selection, battery testing, and direction indication by a moving coil instrument to accurately locate cable sheath faults.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Data Sheet

    Cable Sheath Fault Receiver KMF 1

    The cable sheath fault receiver KMF 1 is applied according to the step voltage method.
    With two earth probes (dismountable for transportation) the cable route is followed.
    Additionally, the battery powered instrument is suitable for location of several successive sheath faults.
    Equipped with an adjustable carrying strap, the sturdy instrument fulfils all requirements for a rigorous
    application in the field.

    Features:
    • battery operation
    • zero point compensation
    • amplification selectable stepless
    • battery test
    • indication of direction by moving coil instrument (galvanometer)
    • accurate location of cable sheath faults
    • applicable in combination with cable sheath test set or surge voltage generator

    BAUR Pruef- und Messtechnik GmbH headoffice@baur.at T +435522/4941-0 Id.Nr. 826-016


    Raiffeisenstrasse 8, 6832-Sulz/Austria www.baur.at F +435522/4941-3 07/2005 Subject to alteration
    Technical data

    KMF 1
    Input resistance > 30 kΩ
    Max. sensitivity 1,5 mV
    Noise suppression > 20 dB at 50 Hz
    Max. compensation ± 125 mV
    Max. input voltage 50 V
    Operating temperature - 20 at + 50 ° C
    Power supply Battery 9 V (IEC 6 LR 61)
    Max. current consumption 6 mA
    Dimensions (W x H x D) approx. 210 x 120 x 90 mm
    Weight approx. 0,6 kg

    Cable Sheath Fault Receiver KMF 1


    Delivery includes:
    • Cable sheath fault receiver KMF 1 without accessories
    • Carrying strap, adjustable in length
    • Test probe red SO 1
    • Test probe blue SO 1
    • Laboratory cable 2 m long; red
    • Laboratory cable 2 m long; blue
    • Auxiliary line 25 m long; on hand reel
    • Battery alkaline-manganese; 9 V; IEC 6 LR 61
    • Operating manual

    Options:
    • Canvas bag for test probe SO 1

    BAUR Pruef- und Messtechnik GmbH headoffice@baur.at T +435522/4941-0 Id.Nr. 826-016


    Raiffeisenstrasse 8, 6832-Sulz/Austria www.baur.at F +435522/4941-3 07/2005 Subject to alteration

    You might also like