Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    TM.P. S.p.A. Termomeccanica Pompe: Pump Performances

    Uploaded by

    Siddiqui Muhammad Ashfaque
    This document provides specifications for a centrifugal pump, including: 1. Performance data such as flow rate, head pressure, efficiency and power requirements. 2. Operating conditions for fluid, density, temperature, pressures and viscosity. 3. Construction details for materials, bearings, seals and auxiliary components. 4. Dimensions for impeller, flanges and mounting. 5. Test results for performance curves, hydraulic pressure and noise levels. 6. Identification information for customer, plant, pump type and drawing numbers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TM.P. S.p.A. Termomeccanica Pompe: Pump Performances

    Uploaded by

    Siddiqui Muhammad Ashfaque
    65 views1 page
    This document provides specifications for a centrifugal pump, including: 1. Performance data such as flow rate, head pressure, efficiency and power requirements. 2. Operating conditions for fluid, density, temperature, pressures and viscosity. 3. Construction details for materials, bearings, seals and auxiliary components. 4. Dimensions for impeller, flanges and mounting. 5. Test results for performance curves, hydraulic pressure and noise levels. 6. Identification information for customer, plant, pump type and drawing numbers.

    Original Description:

    DS5740001_00

    Original Title

    DS5740001_00

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a centrifugal pump, including: 1. Performance data such as flow rate, head pressure, efficiency and power requirements. 2. Operating conditions for fluid, density, temperature, pressures and viscosity. 3. Construction details for materials, bearings, seals and auxiliary components. 4. Dimensions for impeller, flanges and mounting. 5. Test results for performance curves, hydraulic pressure and noise levels. 6. Identification information for customer, plant, pump type and drawing numbers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views1 page

    TM.P. S.p.A. Termomeccanica Pompe: Pump Performances

    Uploaded by

    Siddiqui Muhammad Ashfaque
    This document provides specifications for a centrifugal pump, including: 1. Performance data such as flow rate, head pressure, efficiency and power requirements. 2. Operating conditions for fluid, density, temperature, pressures and viscosity. 3. Construction details for materials, bearings, seals and auxiliary components. 4. Dimensions for impeller, flanges and mounting. 5. Test results for performance curves, hydraulic pressure and noise levels. 6. Identification information for customer, plant, pump type and drawing numbers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TM.P. S.p.A.

    Termomeccanica Pompe
    CENTRIFUGAL PUMP - DATA SHEET

    PUMP PERFORMANCES
    3
    NOR RTD MAX MIN. STABLE FLOW m /h 1,0 SHUT OFF HEAD m 54
    FLOWRATE m3 / h 6,0 P D2 kg m2 0,01 SSS 100
    T.D.H. m 47,5 ROTATION D.E. CCW CW
    EFFICIENCY % 28,0 OPERATING CONDITIONS
    INPUT POWER kW 2,1 FLUID : HC + Water H2S/Cl: ppm
    SPEED RATING RPM 2950 DENSITY : kg / m3 1,00 Vap.P 7-30 psig
    NPSH AV. m TBA TEMPERATURE °C min / RTD / max 40/60/125
    NPSH REQ. m 1,3 PREFER.OPER.REGION VISC. 1 mPa.sec
    SUCT. PRES. MAX/RATED barg impellerCL ALLOW .OPER.REGION EST. MAX SPL 85 dB(A)
    CONSTRUCTION CHARACTERISTICS
    Construction Casing
    HORIZONTAL BARREL MOUNTING: FOOT BRACKET
    VERTICAL CENTERLINE VERTICAL
    PULL OUT CANNED SPLIT: AXIAL RADIAL
    VOLUTE: SINGLE DOUBLE
    DIFFUSER
    MAX ALLOW. WORKING PRESSURE 40,0 bar at 40,0 °C HYDR. PRESSURE 60,0 bar
    Impeller Stage N° 1 Wear Rings
    TYPE : SEMIOPEN CLOSED SUCTION SIDE DELIVERY SIDE
    ENTRY : SINGLE DOUBLE CASING IMPELLER
    MOUNTING: BETWEEN BEARINGS
    OVERHUNG IMPELLER DIA RATED 186,0 MAX / MIN 160 / 206 mm
    SIZE SERIES FINISHING MOUNTING COUNTERFLANGES
    FLANGES SUCTION 3" ANSI 300 RF end SUCTION
    DISCHARGE 2" ANSI 300 RF top DISCHARGE
    THRUST ANTIFRICTION TILTING PADS ON MOTOR
    BEARINGS GREASE LUBR. OIL RING FORCED OIL LUB.
    RADIAL ANTIFRICTION SLEEVE PUMPED FLUID LUB.
    GREASE LUB. OIL RING FORCED OIL LUB.
    COUPLING TYPE : flexible MODEL lamellar (discs) GUARD
    API CLASS MATERIALS S-5 SEAL
    CASING A 216 Gr. WCB PACKING TYPE:
    COVER A 516 Gr. 70 MECHANICAL TYPE:
    IMPELLER A 216 Gr. WCB API PLAN: 11/61
    CASING WEAR RINGS A 276 Tp. 420 Hrd AUXILIARY CIRCUITS
    IMPELLER WEAR RINGS A 276 Tp. 420 Hrd COOLING WATER PIPING PLAN :
    SHAFT AISI Tp. 4140 SEAL JACKET/BRG HSG m3 / h
    FRAME/BASEPLATE fabricated carbon steel SEAL HEAT EXCHANGER m3 / h
    SUCTION BELL TOTAL COOLING WATER m3 / h
    DIFFUSER DRIVER TM.P. CUSTOMER
    SLEEVE ELECTRIC MOTOR :
    DISCHARGE COLUMN KW 4 RPM 2950
    BEARINGS PHASE 3 CYCLES 50
    SHAPE Horizontal VOLTS 415
    TESTS PROTECTION 2 IIA T4
    SHOP WITNESSED DIESEL ENGINE: kW RPM
    PERFORMANCE TURBINE: kW RPM
    NPSH DRAWINGS WEIGHTS [ kg ]
    HYD. PRESS. OUTLINE DWG. DI5740001 PUMP 170
    NOISE LEVEL PERFORM. CURVE DP5740001 BASE 320
    VIBRATIONS QUALITY CONTR. PLAN DRIVER
    NOTES :

    CUSTOMER : PLANT : PUMP TYPE : DATA SHEET N°


    GASCO Compression Project 20 AP 20 DS 5740001
    SERVICE : KO Flare Drum Pump ITEM / Q.TY 2 / 001 REV. 00
    DATE 10/09/2014 SIGNATURE MDB PROPOSAL N° 5740 FILE DATASHEET_AP.xlt

    \\SV208\TMP-SpA\Rete\PRP\DOC_PREV\API\DATASHEET_AP.xlt

    You might also like