COPPER PRESS FITTINGS

CATALOG |
TRUSTED
Mueller Industries’ Streamline PRSTM press fittings are
the trusted, quality solution to flameless copper joining.
Streamline PRS™ is Mueller Industries’ solution for professionals choosing to join copper tubing
through the use of press technology. The company’s Streamline® brand has been the trusted name
in copper piping systems since 1930. With Streamline PRS™, this heritage of quality and reliability
is now available for contractors preferring flameless, mechanical press joining.

• 1/2” — 4” including couplings, elbows, tees, adapters, fitting reducers, caps, and flanges
• Extensive offering of reducing tees
• Leak detection feature identifies un-crimped connections
• Compatible with most common pressing tools and jaws in the market
• EPDM (Ethylene Propylene Diene Monomer) seals are factory-installed & lubricated
• Packaged in common industry quantities

TABLE OF CONTENTS
BENEFITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SYSTEM DATA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TESTING WITH LEAK DETECTION . . . . . . . . . . . . 20

DIMENSIONAL DATA. . . . . . . . . . . . . . . . . . . . . . . 6-15 INSTALLATION GUIDELINES . . . . . . . . . . . . . . . 21-24

TOOLS & JAWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 FAQ'S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26

ENGINEERING DATA. . . . . . . . . . . . . . . . . . . . . . . . 17

INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . 18

STREAMLINE®
THE BEST IN THE JOINT.®
Since 1930, Mueller Industries’ Streamline® brand has been the preferred choice of professionals around the world.
Trust your copper piping system with the proven performance and reliability of Streamline® products.

• Copper Plumbing Tube • Copper Press-Joint Fittings & Flanges (PRS™)

• Copper AC & Refrigeration Tube • Copper Push-Fit Fittings (PSH™)
• Copper Oxygen & Medical Gas Tube • Copper-Iron Braze-Joint Fittings (XHP™)
• Copper Temperature Control Tube • Copper Braze-Joint Oxygen/Medical Gas Fittings
• Copper Plastic-Coated Tube • Cast Bronze Fittings & Flanges
• Copper-Iron Tube (XHP™) • Brass 45° Flare Fittings & Flanges
• Copper Line Sets & Mini Split Line Sets • Plumbing Valves
• Copper Lines Sets with Duraguard™ PE/UV Insulation • Refrigeration Valves & Manifolds
• Copper Solder-Joint Fittings & Flanges • AC/R Protection Devices

3
 | BENEFITS

WHY STREAMLINE PRSTM?

Press technology is growing in use as installers We understand that press tool and jaw sets are
seek alternative methods due to skilled labor an expensive investment for the contractor and
constraints and other factors. Its common piping inventory item for wholesalers. Therefore, we
system applications today range from those in focused on improvements to the seal mechanics,
new commercial building construction, to MRO rather than the basic design of the fitting. With
factory maintenance, to retrofit and remodel our design, Streamline PRSTM fittings are
of existing flow control systems. Since the first compatible with most tools and jaws on the
design was patented, there have been a number market, making it easy for the end user.
of important evolutionary modifications. These
improvements have been focused on providing With Streamline PRSTM we are confident that we
greater ease of installation and on increasing the have engineered a better, more reliable joint that
reliability of modern press technology. will withstand higher pressures and will yield
significantly improved anti-creep performance.
Streamline PRSTM builds upon these
advancements and continues the quest of
improved joint design, increased holding
power, and greater reliability. With patented
design improvements and rigorous testing
requirements, we are confident that we have
accomplished all of these objectives.

QUALITY
4
 SYSTEM DATA |

SYSTEM DESCRIPTION APPROVED SYSTEMS

Streamline PRSTM mechanical press copper • Potable water
fittings are for use in plumbing or mechanical • Hydronic heating (w/ glycol)
applications. Sizes range from 1/2" — 4" and • Chilled water
the fittings are designed to join ASTM B88
• Compressed air (200 PSI max)
(Types K, L, M) hard-drawn copper tube
(1/2" — 4") and soft copper tube (1/2" — 1-1/4"). • Non-medical gases (140 PSI max)
• Low pressure steam (15 PSI max)
FITTINGS • Vacuum (24.5” mercury max @ 68°F)

• 350 line items available, including WARRANTY

elbows, couplings, fitting reducers, tees,
adapters, unions, caps, flanges, Streamline PRSTM fittings carry a 50-year limited
and accessories. warranty against defects in material and
• All fittings are made of either wrot workmanship.
copper or lead-free brass.
APPROVALS & CERTIFICATIONS
APPLICATIONS/COMPLIANCE • ASME B16.51
• All tubing must comply with the • IAPMO PS-117
ASTM B88 standard. • NSF/ANSI 61
• Approved for installations in above and • NSF/ANSI 372
below ground applications as allowed • CSA TIL-MSE-13
by local code. • ABS
• Approved for use as mechanical joints in ex-
posed or behind-the-wall applications

OPERATING PARAMETERS
• Operating pressure: 200 PSI CWP max
• Operating temperature range: -20°F — 250°F

SYSTEM BENEFITS
• Fast and easy to use
• Flameless
• Permanent connections
• Size range from 1/2” to 4”
• Large selection of fittings
• Consistent professional appearance
• Less equipment required
• Environmentally friendly system
• Compatibility of fittings and tools

5
 | DIMENSIONAL DATA

45° ELBOW • SMALL 45° ELBOW • STREET • LARGE

PXP FTG X P

X
X
X

Z
Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box X Z
PF 03026 1/2" 0.10 10 400 0.28 PF 03363 2-1/2" 1.57 1 18 1.30 3.23
PF 03034 3/4" 0.15 10 200 0.37 PF 03368 3" 2.32 1 12 1.57 3.50
PF 03044 1" 0.21 5 140 0.45 PF 03373 4" 3.96 1 6 2.07 4.59
PF 03050 1-1/4" 0.28 1 70 0.51
PF 03055 1-1/2" 0.58 1 40 0.59
PF 03059 2" 0.82 1 25 0.79

45° ELBOW • LARGE 90° ELBOW • SHORT RADIUS • SMALL

PXP PXP
X

X
X

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box X
PF 03063 2-1/2" 1.74 1 16 1.30 PF 02722 1/2" 0.12 10 350 0.75
PF 03067 3" 2.27 1 12 1.57 PF 01634 3/4" 0.18 10 180 0.75
PF 03073 4" 4.11 1 6 2.07 PF 01647 1" 0.28 5 100 1.22
PF 02084 1-1/4" 0.35 1 55 1.22
PF 02085 1-1/2" 0.63 1 35 1.24
PF 02086 2" 1.07 1 18 2.05

45° ELBOW • STREET • SMALL 90° ELBOW • LONG RADIUS • SMALL

FTG X P PXP
X

X
Z

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Z Lbs / Pc Pcs / Bag Pcs / Box X
PF 03326 1/2" 0.09 10 450 0.28 1.10 PF 02722 1/2" 0.12 10 350 0.75
PF 03334 3/4" 0.15 10 260 0.37 1.32 PF 02734 3/4" 0.20 10 180 1.30
PF 03344 1" 0.20 5 140 0.45 1.44 PF 02747 1" 0.29 5 100 1.30
PF 03350 1-1/4" 0.28 1 70 0.51 1.67 PF 02055 1-1/4" 0.40 1 55 1.65
PF 03355 1-1/2" 0.56 1 40 0.59 2.13 PF 02063 1-1/2" 0.79 1 35 2.01
PF 03359 2" 0.80 1 25 0.79 2.48 PF 02072 2" 1.21 1 18 2.52

6
 DIMENSIONAL DATA |

90° ELBOW • LONG RADIUS • LARGE 90° ELBOW • LONG RADIUS • STREET • SMALL
PXP FTG X P

X
X Z

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box X Z
PF 02082 2-1/2" 2.10 1 12 2.99 PF 02822 1/2" 0.11 10 400 0.75 1.57
PF 02092 3" 2.10 1 9 3.58 PF 02834 3/4" 0.19 10 200 1.02 2.01
PF 02095 4" 5.62 1 4 4.74 PF 02847 1" 0.27 5 100 1.30 2.28
PF 02350 1-1/4" 0.41 1 55 1.65 2.83
PF 02355 1-1/2" 0.76 1 35 2.01 3.52
PF 02359 2" 1.16 1 20 2.52 4.15

90° ELBOW • LONG RADIUS 90° ELBOW • LONG RADIUS • STREET • LARGE
REDUCING • SMALL P X P FTG X P

X
X

X1 Z

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X X1 Lbs / Pc Pcs / Bag Pcs / Box X Z
PF 02736 3/4" x 1/2" 0.19 15 240 1.02 1.26 PF 02363 2-1/2" 2.05 1 14 2.99 5.00
PF 02749 1" x 3/4" 0.30 10 120 1.30 1.56 PF 02368 3" 3.04 1 9 3.58 5.58
PF 02395 4" 5.70 1 4 4.74 7.05

90° ELBOW • SHORT RADIUS • STREET • SMALL

FTG X P
X

Approx Wt Inner Qty Master Qty Dimensions (Inch)

Item No. Diameter Lbs / Pc Pcs / Bag Pcs / Box X Z
PF 01654 3/4" 0.16 10 200 0.75 2.01
PF 02344 1" 0.27 5 100 1.22 2.28
PF 02384 1-1/4" 0.35 1 55 1.22 2.84
PF 02385 1-1/2" 0.64 1 35 1.24 3.52
PF 02386 2" 1.05 1 20 2.05 4.15

7
 | DIMENSIONAL DATA

90° ELBOW • MALE • SMALL ADAPTER • FEMALE • SMALL

P X MPT P X FPT

X
L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box L X Lbs / Pc Pcs / Bag Pcs / Box A
PF 01506 1/2" 0.23 5 200 2.82 0.75 PF 01231 1/2" 0.10 10 300 0.70
PF 01531 3/4" 0.39 5 120 3.36 1.02 PF 01246 3/4" 0.17 10 150 0.87
PF 01558 1" 0.60 1 65 3.76 1.30 PF 01263 1" 0.25 10 180 0.89
PF 01593 1-1/4" 0.81 1 45 4.41 1.65 PF 01271 1-1/4" 0.35 1 80 0.96
PF 01631 1-1/2" 1.42 1 25 5.22 2.01 PF 01279 1-1/2" 0.53 1 55 1.02
PF 01679 2" 2.12 1 15 5.98 2.52 PF 01287 2" 0.78 1 40 1.06

90° ELBOW • FEMALE • SMALL ADAPTER • FEMALE • LARGE

P X FPT P X FPT
A
X

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box L X Lbs / Pc Pcs / Bag Pcs / Box A
PF 01507 1/2" 0.23 5 200 2.65 0.75 PF 01296 2-1/2" 1.25 1 36 1.30
PF 01532 3/4" 0.37 5 120 3.24 1.02 PF 01297 3" 1.85 1 24 1.54
PF 01559 1" 0.55 1 60 3.57 1.30
PF 01594 1-1/4" 0.74 1 45 4.13 1.65
PF 01632 1-1/2" 1.34 1 25 4.95 2.01
PF 01680 2" 1.98 1 15 5.67 2.52

90° ELBOW • DROP EAR • SMALL ADAPTER • FEMALE • REDUCING • SMALL

P X FPT P X FPT
L3 L2
A
A
L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A L L2 L3 Lbs / Pc Pcs / Bag Pcs / Box A
PF 01508 1/2" 0.25 5 100 0.88 1.63 0.76 0.75 PF 01232 1/2" x 3/8" 0.07 10 300 0.53
PF 02581 3/4" 0.44 5 60 1.09 2.00 1.25 0.87 PF 01230 1/2" x 3/4" 0.15 10 180 0.98
PF 01247 3/4" x 1/2" 0.17 10 180 0.71
PF 01265 1" x 1/2" 0.29 10 120 0.73
PF 01264 1" x 3/4" 0.22 10 200 0.71
PF 01261 1" x 1-1/4" 0.46 10 60 1.40
PF 01272 1-1/4" x 1" 0.29 1 100 0.85
PF 01270 1-1/4" x 1-1/2" 0.62 1 70 1.56
PF 01280 1-1/2" x 1-1/4" 0.46 1 70 0.94

8
 DIMENSIONAL DATA |

ADAPTER • FEMALE • STREET • SMALL ADAPTER • MALE • LARGE

FTG X FPT P X MPT
A
A

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A Lbs / Pc Pcs / Bag Pcs / Box A
PF 15310 1/2" 0.09 5 250 1.59 PF 01196 2-1/2" 1.62 1 28 1.97
PF 01546 3/4" 0.15 5 150 1.90 PF 01199 3" 2.23 1 18 2.11
PF 01563 1" 0.23 1 110 1.96 PF 01150 4" 3.83 1 12 2.32
PF 01571 1-1/4" 0.32 1 100 2.17
PF 01579 1-1/2" 0.49 1 55 2.63
PF 01587 2" 0.75 1 40 2.84

ADAPTER • FEMALE • STREET • ADAPTER • MALE • REDUCING • SMALL

REDUCING • SMALL FTG X FPT P X MPT
A
A

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A Lbs / Pc Pcs / Bag Pcs / Box A
PF 01534 1/2" x 3/4" 0.15 5 160 1.87 PF 01132 1/2" x 3/8" 0.09 10 300 0.71
PF 01547 3/4" x 1/2" 0.15 5 160 1.81 PF 01130 1/2" x 3/4" 0.19 10 180 0.97
PF 01564 1" x 3/4" 0.15 5 250 1.77 PF 01147 3/4" x 1/2" 0.17 10 180 0.90
PF 01145 3/4" x 1" 0.30 10 200 1.20
PF 01164 1" x 3/4" 0.24 10 180 0.92
PF 01162 1" x 1-1/4" 0.45 10 100 1.23
PF 01172 1-1/4" x 1" 0.35 1 95 1.10
PF 01170 1-1/4" x 1-1/2" 0.59 1 75 1.30
PF 01180 1-1/2" x 1-1/4" 0.59 1 55 1.19
PF 01178 1-1/2" x 2" 1.01 1 40 1.75
PF 01188 2" x 1-1/2" 0.92 1 40 1.42

ADAPTER • MALE • SMALL ADAPTER • MALE • STREET • SMALL

P X MPT FTG X MPT

A
A

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A Lbs / Pc Pcs / Bag Pcs / Box A
PF 01131 1/2" 0.11 10 300 0.89 PF 01431 1/2" 0.10 5 250 1.75
PF 01146 3/4" 0.19 10 160 0.89 PF 01446 3/4" 0.17 5 160 2.02
PF 01163 1" 0.28 10 160 1.06 PF 01463 1" 0.27 5 200 2.15
PF 01171 1-1/4" 0.37 1 100 0.99 PF 01471 1-1/4" 0.41 1 100 2.44
PF 01179 1-1/2" 0.63 1 50 1.19 PF 01479 1-1/2" 0.59 1 60 2.90
PF 01187 2" 0.90 1 35 1.28 PF 01487 2" 0.89 1 40 3.15

9
 | DIMENSIONAL DATA

ADAPTER • MALE • STREET COUPLING • CROSS OVER • SMALL

REDUCING • SMALL FTG X MPT PXP

H
L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A Lbs / Pc Pcs / Bag Pcs / Box H L
PF 01434 1/2" x 3/4" 0.18 5 200 2.05 PF 02535 1/2" 0.21 10 200 0.94 3.33
PF 01447 3/4" x 1/2" 0.16 5 200 1.95 PF 02583 3/4" 0.39 10 100 1.28 4.84
PF 01464 1" x 3/4" 0.20 5 200 2.03

CAP • SMALL COUPLING • CROSS OVER • STREET • SMALL

P FTG X P

H
A

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box A H
PF 07007 1/2" 0.05 10 450 0.10 PF 12535 1/2" 0.15 10 250 3.78 0.94
PF 07009 3/4" 0.08 10 450 0.11 PF 12583 3/4" 0.31 10 100 5.31 1.28
PF 07011 1" 0.10 5 250 0.11
PF 07012 1-1/4" 0.15 1 100 0.11
PF 07013 1-1/2" 0.28 1 80 0.12
PF 07014 2" 0.41 1 55 0.13

CAP • LARGE COUPLING • NO STOP • SMALL

P PXP

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box A
PF 07015 2-1/2" 0.68 1 40 0.33 PF 01903 1/2" 0.08 10 450 1.50
PF 07016 3" 0.97 1 36 0.33 PF 01905 3/4" 0.13 10 260 1.81
PF 07018 4" 1.68 1 24 0.39 PF 01906 1" 0.16 5 170 1.81
PF 01907 1-1/4" 0.22 1 80 2.05
PF 01908 1-1/2" 0.46 1 50 2.83
PF 01909 2" 0.61 1 35 3.15

10
 DIMENSIONAL DATA |

COUPLING • NO STOP • LARGE COUPLING • STAKED STOP • LARGE

PXP PXP
A

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A Lbs / Pc Pcs / Bag Pcs / Box X
PF 01910 2-1/2" 1.09 1 32 3.54 PF 10151 2-1/2" 1.09 1 32 0.16
PF 01911 3" 1.45 1 18 3.86 PF 10152 3" 1.45 1 18 0.16
PF 01913 4" 2.43 1 12 4.49 PF 10154 4" 2.43 1 12 0.16

COUPLING • REDUCING • SMALL

PXP

COUPLING • NO STOP • EXTENDED • SMALL

PXP

A
X

Approx Wt Inner Qty Master Qty Dimensions (Inch)

Item No. Diameter Lbs / Pc Pcs / Bag Pcs / Box X
PF 01036 3/4" x 1/2" 0.12 10 300 0.33
PF 01051 1" x 1/2" 0.16 10 200 0.53
PF 01049 1" x 3/4" 0.18 10 200 0.30
Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter PF 01060 1-1/4" x 1/2" 0.21 1 100 0.71
Lbs / Pc Pcs / Bag Pcs / Box A
PF 01058 1-1/4" x 3/4" 0.24 1 80 0.51
PF 01950 1/2" 0.13 5 250 2.95 PF 01056 1-1/4" x 1" 0.23 1 80 0.31
PF 01952 3/4" 0.20 5 150 3.41 PF 01069 1-1/2" x 1/2" 0.37 1 70 0.91
PF 01955 1" 0.30 5 100 3.94 PF 01067 1-1/2" x 3/4" 0.39 1 70 0.69
PF 01956 1-1/4" 0.38 1 60 4.13 PF 01065 1-1/2" x 1" 0.38 1 70 0.49
PF 01957 1-1/2" 0.70 1 40 4.72 PF 01064 1-1/2" x 1-1/4" 0.39 1 60 0.37
PF 01958 2" 0.95 1 27 5.31 PF 01079 2" x 1/2" 0.55 1 50 1.28
PF 01077 2" x 3/4" 0.55 1 50 1.10
PF 01075 2" x 1" 0.47 1 50 0.81
PF 01074 2" x 1-1/4" 0.55 1 40 0.73
PF 01073 2" x 1-1/2" 0.64 1 40 0.51

COUPLING • STAKED STOP • SMALL COUPLING • REDUCING • LARGE

PXP PXP

X
X

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box X
PF 10145 1/2" 0.08 10 550 0.08 PF 01086 2-1/2" x 1" 0.99 1 40 1.54
PF 10146 3/4" 0.13 10 260 0.08 PF 01085 2-1/2" x 1-1/4" 1.00 1 40 1.65
PF 10147 1" 0.16 5 170 0.08 PF 01084 2-1/2" x 1-1/2" 1.09 1 40 1.50
PF 10148 1-1/4" 0.22 1 80 0.08 PF 01083 2-1/2" x 2" 1.16 1 30 1.12
PF 10149 1-1/2" 0.46 1 50 0.08 PF 01095 3" x 1-1/2" 1.57 1 24 1.83
PF 10150 2" 0.61 1 35 0.08 PF 01094 3" x 2" 1.58 1 24 1.50
PF 01093 3" x 2-1/2" 1.73 1 24 1.14
PF 10111 4" x 2" 2.47 1 10 2.24
PF 10110 4" x 2-1/2" 2.67 1 10 1.93
PF 10109 4" x 3" 2.79 1 10 1.54

11
 | DIMENSIONAL DATA

FITTING REDUCER • SMALL TEE • SMALL

FTG X P PXPXP

Y
X X X

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X Lbs / Pc Pcs / Bag Pcs / Box X Y
PF 01326 3/4" x 1/2" 0.11 10 400 0.20 PF 04006 1/2" 0.21 10 200 0.67 0.49
PF 01339 1" x 1/2" 0.13 10 300 0.41 PF 04031 3/4" 0.35 10 120 0.81 0.55
PF 01337 1" x 3/4" 0.15 10 240 0.24 PF 04048 1" 0.51 5 70 0.89 0.79
PF 01347 1-1/4" x 1/2" 0.17 5 180 0.59 PF 04068 1-1/4" 0.66 1 45 0.96 0.83
PF 01345 1-1/4" x 3/4" 0.20 5 170 0.47 PF 04084 1-1/2" 1.22 1 25 1.10 1.10
PF 01343 1-1/4" x 1" 0.19 5 150 0.24 PF 40102 2" 1.73 1 15 1.30 1.34
PF 01355 1-1/2" x 1/2" 0.27 5 130 0.79
PF 01353 1-1/2" x 3/4" 0.28 1 70 0.61
PF 01351 1-1/2" x 1" 0.30 1 70 0.43
PF 01350 1-1/2" x 1-1/4" 0.29 1 70 0.26 TEE • LARGE
PF 01364 2" x 1/2" 0.45 1 50 1.16
PF 01362 2" x 3/4" 0.46 1 50 0.97
PXPXP
PF 01360 2" x 1" 0.46 1 50 0.79
PF 01359 2" x 1-1/4" 0.46 1 50 0.61
PF 01358 2" x 1-1/2" 0.55 1 40 0.43

Y
FITTING REDUCER • LARGE
FTG X P
X X

Approx Wt Inner Qty Master Qty Dimensions (Inch)

Item No. Diameter Lbs / Pc Pcs / Bag Pcs / Box X Y
PF 40123 2-1/2" 2.13 1 10 1.73 1.81
PF 40152 3" 3.01 1 7 2.01 2.11
PF 40200 4" 5.48 1 4 2.58 2.68
X

Approx Wt Inner Qty Master Qty Dimensions (Inch) TEE • REDUCING • SMALL
Item No. Diameter Lbs / Pc Pcs / Bag Pcs / Box X PXPXP
PF 01370 2-1/2" x 1" 0.80 1 40 1.36
PF 01369 2-1/2" x 1-1/4" 0.80 1 40 1.52
PF 01368 2-1/2" x 1-1/2" 0.88 1 40 1.32
PF 01367 2-1/2" x 2" 0.90 1 35 0.94
PF 01379 3" x 1-1/4" 1.11 1 25 1.91
Y

PF 01378 3" x 1-1/2" 1.21 1 24 1.71

PF 01377 3" x 2" 1.21 1 24 1.32
PF 01376 3" x 2-1/2" 1.38 1 24 0.98
PF 01389 4" x 2" 2.33 1 12 2.11 X X1
PF 01388 4" x 2-1/2" 2.44 1 10 1.75
PF 01387 4" x 3" 2.52 1 10 1.42
Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Lbs / Pc Pcs / Bag Pcs / Box X X1 Y
PF 04047 1/2" x 1/2" x 3/4" 0.32 10 140 0.83 0.83 0.55
PF 04067 1/2" x 1/2" x 1" 0.72 5 60 2.28 2.28 0.80
PF 04043 3/4" x 1/2" x 1/2" 0.28 10 150 0.61 0.77 0.55
PF 04041 3/4" x 1/2" x 3/4" 0.33 5 120 0.81 0.89 0.55
PF 04033 3/4" x 3/4" x 1/2" 0.29 10 140 0.61 0.61 0.55
PF 04065 3/4" x 3/4" x 1" 0.77 5 60 2.11 2.11 0.79
PF 04062 1" x 1/2" x 3/4" 0.44 5 80 0.81 1.00 0.71
PF 04061 1" x 1/2" x 1" 0.48 5 80 0.89 1.22 0.79
PF 04058 1" x 3/4" x 1/2" 0.51 5 100 0.69 0.77 0.79
PF 04056 1" x 3/4" x 3/4" 0.43 5 100 0.81 0.96 0.71

12
 DIMENSIONAL DATA |

TEE • REDUCING • SMALL TEE • REDUCING • LARGE

PXPXP PXPXP

Y
Y
X X1
X X1

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box X X1 Y Lbs / Pc Pcs / Bag Pcs / Box X X1 Y
PF 04055 1" x 3/4" x 1" 0.48 5 70 0.89 1.10 0.80 PF 40222 2-1/2" x 3/4" x 2-1/2" 3.34 1 10 1.73 5.20 1.81
PF 04051 1" x 1" x 1/2" 0.41 5 100 0.69 0.69 0.79 PF 40221 2-1/2" x 1" x 2-1/2" 3.33 1 10 1.73 5.06 1.81
PF 04049 1" x 1" x 3/4" 0.45 5 80 0.81 0.81 0.71 PF 40220 2-1/2" x 1-1/4" x 2-1/2" 3.35 1 8 1.73 5.22 1.81
PF 04082 1" x 1" x 1-1/4" 1.02 1 35 2.42 2.42 0.83 PF 40138 2-1/2" x 1-1/2" x 2" 3.10 1 10 1.59 4.90 1.83
PF 04083 1-1/4" x 1/2" x 1-1/4" 0.81 1 40 0.96 2.66 0.83 PF 40137 2-1/2" x 1-1/2" x 2-1/2" 3.47 1 8 1.73 5.04 1.81
PF 04081 1-1/4" x 3/4" x 1/2" 0.65 1 50 0.47 2.05 0.83 PF 40135 2-1/2" x 2" x 3/4" 2.54 1 15 0.98 3.90 1.56
PF 04080 1-1/4" x 3/4" x 3/4" 0.73 1 50 0.61 2.19 0.83 PF 40134 2-1/2" x 2" x 1" 2.60 1 15 1.10 4.02 1.59
PF 04079 1-1/4" x 3/4" x 1" 0.78 1 50 0.69 2.26 0.83 PF 40132 2-1/2" x 2" x 1-1/2" 2.89 1 12 1.34 4.29 1.83
PF 04078 1-1/4" x 3/4" x 1-1/4" 0.85 1 40 0.96 2.54 0.83 PF 40131 2-1/2" x 2" x 2" 3.06 1 10 1.59 4.53 1.83
PF 04076 1-1/4" x 1" x 1/2" 0.65 1 50 0.47 1.81 0.83 PF 40130 2-1/2" x 2" x 2-1/2" 3.43 1 10 1.73 4.65 1.81
PF 04075 1-1/4" x 1" x 3/4" 0.70 1 45 0.61 1.95 0.83 PF 40129 2-1/2" x 2-1/2" x 1/2" 1.52 1 18 0.87 0.87 1.52
PF 04074 1-1/4" x 1" x 1" 0.75 1 50 0.69 2.03 0.83 PF 40128 2-1/2" x 2-1/2" x 3/4" 1.64 1 18 0.98 0.98 1.56
PF 04073 1-1/4" x 1" x 1-1/4" 0.84 1 40 0.96 2.30 0.83 PF 40127 2-1/2" x 2-1/2" x 1" 1.70 1 16 1.10 1.10 1.59
PF 04071 1-1/4" x 1-1/4" x 1/2" 0.45 1 60 0.47 0.47 0.83 PF 40126 2-1/2" x 2-1/2" x 1-1/4" 1.79 1 15 1.24 1.24 1.83
PF 04070 1-1/4" x 1-1/4" x 3/4" 0.50 1 55 0.61 0.61 0.83 PF 40125 2-1/2" x 2-1/2" x 1-1/2" 1.92 1 12 1.34 1.34 1.83
PF 04069 1-1/4" x 1-1/4" x 1" 0.57 1 50 0.69 0.69 0.83 PF 40124 2-1/2" x 2-1/2" x 2" 2.13 1 12 1.59 1.59 1.83
PF 40244 1-1/2" x 1/2" x 1-1/2" 1.48 1 25 1.10 3.39 1.10 PF 40179 3" x 3/4" x 3" 4.68 1 6 2.01 6.00 2.11
PF 40238 1-1/2" x 3/4" x 3/4" 1.04 1 30 0.63 2.74 1.10 PF 40178 3" x 1" x 3" 4.68 1 7 2.01 5.81 2.11
PF 04098 1-1/2" x 1" x 3/4" 1.08 1 30 0.63 2.56 1.10 PF 40181 3" x 1-1/4" x 3" 4.69 1 6 2.01 6.06 2.11
PF 04097 1-1/2" x 1" x 1" 1.15 1 30 0.75 2.68 1.10 PF 40174 3" x 1-1/2" x 3" 4.72 1 6 2.01 5.85 2.11
PF 04095 1-1/2" x 1" x 1-1/2" 1.46 1 25 1.10 3.03 1.10 PF 40164 3" x 2" x 2" 4.12 1 9 1.61 5.06 2.09
PF 04093 1-1/2" x 1-1/4" x 3/4" 1.11 1 35 0.63 2.38 1.10 PF 40165 3" x 2" x 2-1/2" 4.38 1 8 1.77 5.22 2.07
PF 04092 1-1/2" x 1-1/4" x 1" 1.18 1 30 0.75 2.50 1.10 PF 40167 3" x 2" x 3" 4.75 1 6 2.01 5.45 2.11
PF 04091 1-1/2" x 1-1/4" x 1-1/4" 1.24 1 30 0.96 2.72 1.16 PF 40157 3" x 2-1/2" x 2" 4.24 1 8 4.72 1.61 2.09
PF 04088 1-1/2" x 1-1/2" x 1/2" 0.75 1 40 0.47 0.47 1.08 PF 40158 3" x 2-1/2" x 2-1/2" 4.60 1 6 1.77 4.88 2.07
PF 04087 1-1/2" x 1-1/2" x 3/4" 0.84 1 35 0.63 0.63 1.10 PF 40159 3" x 2-1/2" x 3" 4.95 1 6 2.01 5.12 2.11
PF 04086 1-1/2" x 1-1/2" x 1" 0.92 1 35 0.75 0.75 1.10 PF 40145 3" x 3" x 1/2" 2.07 1 15 0.87 0.87 1.79
PF 04085 1-1/2" x 1-1/2" x 1-1/4" 1.06 1 30 0.96 0.96 1.16 PF 40146 3" x 3" x 3/4" 2.14 1 12 1.00 1.00 1.80
PF 40249 2" x 1/2" x 2" 2.11 1 15 1.30 4.11 1.34 PF 40147 3" x 3" x 1" 2.23 1 12 1.10 1.10 1.85
PF 40248 2" x 3/4" x 2" 2.12 1 15 1.30 3.92 1.34 PF 40148 3" x 3" x 1-1/4" 2.33 1 12 1.24 1.24 2.09
PF 40247 2" x 1" x 1" 1.61 1 20 3.29 0.85 1.34 PF 40149 3" x 3" x 1-1/2" 2.55 1 10 1.34 1.34 2.09
PF 40245 2" x 1" x 2" 2.09 1 15 1.30 3.74 1.34 PF 40150 3" x 3" x 2" 2.75 1 10 1.61 1.61 2.09
PF 40117 2" x 1-1/4" x 1-1/4" 1.73 1 20 0.89 3.15 1.34 PF 40151 3" x 3" x 2-1/2" 2.68 1 7 1.77 1.77 2.07
PF 40113 2" x 1-1/2" x 3/4" 1.70 1 20 0.75 2.83 1.34 PF 40204 4" x 3" x 2" 6.97 1 4 5.49 1.63 2.66
PF 40112 2" x 1-1/2" x 1" 1.73 1 20 0.85 2.93 1.34 PF 40206 4" x 3" x 3" 7.85 1 4 2.11 5.96 2.70
PF 40111 2" x 1-1/2" x 1-1/4" 1.83 1 20 0.89 2.97 1.34 PF 40191 4" x 4" x 1/2" 3.41 1 8 0.87 0.87 2.42
PF 40110 2" x 1-1/2" x 1-1/2" 1.97 1 16 1.08 3.17 1.34 PF 40192 4" x 4" x 3/4" 3.48 1 8 1.02 1.02 2.39
PF 40109 2" x 1-1/2" x 2" 2.19 1 16 1.30 3.39 1.34 PF 40193 4" x 4" x 1" 3.60 1 8 1.14 1.14 2.38
PF 40107 2" x 2" x 1/2" 0.99 1 25 0.49 0.49 1.26 PF 40194 4" x 4" x 1-1/4" 3.83 1 5 1.28 1.28 2.66
PF 40106 2" x 2" x 3/4" 1.20 1 25 0.75 0.75 1.34 PF 40195 4" x 4" x 1-1/2" 4.00 1 6 1.38 1.38 2.66
PF 40105 2" x 2" x 1" 1.28 1 23 0.85 0.85 1.34 PF 40196 4" x 4" x 2" 4.25 1 6 1.63 1.63 2.66
PF 40104 2" x 2" x 1-1/4" 1.33 1 20 0.89 0.89 1.34 PF 40197 4" x 4" x 2-1/2" 4.74 1 4 1.87 1.87 2.64
PF 40103 2" x 2" x 1-1/2" 1.53 1 16 1.08 1.08 1.34 PF 40198 4" x 4" x 3" 5.15 1 4 2.11 2.11 2.70

13
 | DIMENSIONAL DATA

TEE • FEMALE • SMALL UNION • SMALL

P X P X FPT PXP

L
A
X X L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box L X Lbs / Pc Pcs / Bag Pcs / Box A L
PF 01512 1/2" 0.30 5 150 2.08 0.67 PF 08003 1/2" 0.31 1 144 1.38 2.87
PF 01538 3/4" 0.51 5 80 2.45 0.81 PF 08004 3/4" 0.48 1 60 1.31 3.22
PF 01569 1" 0.74 5 60 2.75 0.89 PF 08005 1" 0.73 1 32 1.91 3.27
PF 01607 1-1/4" 0.94 1 40 3.04 0.96 PF 11205 1-1/4" 0.93 1 28 1.92 3.27
PF 01644 1-1/2" 1.64 1 20 3.90 1.10 PF 11206 1-1/2" 1.20 1 24 2.59 3.27
PF 11207 2" 1.92 1 16 2.37 3.27

TEE • FEMALE • REDUCING • SMALL UNION • FEMALE • SMALL

P X P X FPT P X FPT
L

X X L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box L X Lbs / Pc Pcs / Bag Pcs / Box A L
PF 02577 3/4" x 3/4" x 1/4" 0.36 5 120 1.89 0.61 PF 11422 1/2" 0.21 1 192 0.90 2.05
PF 01539 3/4" x 3/4" x 1/2" 0.39 5 100 2.13 0.61 PF 11423 3/4" 0.43 1 90 0.90 2.86
PF 01570 1" x 1" x 1/2" 0.47 5 80 2.37 0.69 PF 11424 1" 0.62 1 48 0.83 2.82
PF 01572 1" x 1" x 3/4" 0.60 5 70 2.61 0.81 PF 11425 1-1/4" 0.84 1 28 1.20 3.06
PF 01613 1-1/4" x 1-1/4" x 1/2" 0.56 1 60 2.41 0.47 PF 11426 1-1/2" 1.04 1 24 1.69 3.02
PF 02654 1-1/4" x 1-1/4" x 3/4" 0.69 1 50 2.72 0.61 PF 11427 2" 1.52 1 16 1.50 3.24
PF 01645 1-1/2" x 1-1/2" x 1/2" 0.83 1 40 2.67 0.47
PF 02673 1-1/2" x 1-1/2" x 3/4" 0.95 1 35 3.00 0.63
PF 01699 2" x 2" x 1/2" 1.06 1 25 2.85 0.49
PF 02706 2" x 2" x 3/4" 1.28 1 20 3.24 0.75

TEE • FEMALE • REDUCING • LARGE UNION • MALE • SMALL

P X P X FPT P X MPT
L1

A
X X Z

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box L1 X Lbs / Pc Pcs / Bag Pcs / Box A Z
PF 02727 2-1/2" x 2-1/2" x 3/4" 1.67 1 18 2.37 0.98 PF 11210 1/2" 0.28 1 144 1.67 2.78
PF 02718 3" x 3" x 3/4" 2.27 1 13 2.61 1.00 PF 11211 3/4" 0.49 1 60 1.77 3.38
PF 02729 4" x 4" x 3/4" 3.55 1 8 3.20 1.02 PF 11212 1" 0.77 1 32 2.20 3.76
PF 11213 1-1/4" 1.01 1 28 2.20 3.80
PF 11214 1-1/2" 1.32 1 24 2.87 3.77
PF 11215 2" 1.97 1 16 2.56 4.56

14
 DIMENSIONAL DATA |

FLANGE • SMALL SHORTCUTS™

P X FLANGE FTG X FTG

A B

L
H
A

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A H L Lbs / Pc Pcs / Bag Pcs / Box A B
PF 02933 1" 2.34 1 14 3.11 1.78 2.68 SC04001 1/2" 0.048 10 1000 0.125 0.839
PF 03806 1-1/4" 2.94 1 14 3.50 1.80 2.82 SC06001 3/4" 0.102 10 500 0.125 1.050
PF 03907 1-1/2" 3.13 1 7 3.88 1.78 3.19 SC10001 1" 0.134 10 100 0.125 1.010
PF 02980 2" 4.50 1 4 4.76 1.86 3.44 SC12001 1-1/4" 0.222 5 75 0.438 1.163
SC14001 1-1/2" 0.383 5 75 0.625 1.521
SC20001 2" 0.643 5 50 0.750 1.647
SC24001 2-1/2" 0.952 1 30 0.625 1.800
SC30001 3" 1.412 1 20 0.625 1.999
SC40001 4" 2.566 1 15 0.625 2.277

FLANGE • LARGE BALL VALVE • PRESS

P X FLANGE PXP
L
H

A
A
L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A H L Lbs / Pc Pcs / Bag Pcs / Box A L
PF 02746 2-1/2" 6.29 1 4 5.51 1.57 3.26 107-723PV 1/2" 0.54 5 50 1.15 3.90
PF 02802 3" 7.53 1 3 6.30 1.38 3.23 107-724PV 3/4" 0.87 5 25 1.39 4.51
PF 01940 4" 11.76 1 3 7.28 1.51 3.68 107-725PV 1" 1.14 3 15 1.65 4.77
107-726PV 1-1/4" 1.54 2 12 1.96 5.08
107-727PV 1-1/2" 2.77 2 12 2.33 5.83
107-728PV 2" 4.22 2 10 2.96 7.33

FLANGE BALL VALVE • PRESS

FTG X FLANGE PXP

A
L

Approx Wt Inner Qty Master Qty Dimensions (Inch) Approx Wt Inner Qty Master Qty Dimensions (Inch)
Item No. Diameter Item No. Diameter
Lbs / Pc Pcs / Bag Pcs / Box A L Lbs / Pc Pcs / Bag Pcs / Box A L
PF 12980 2" 6.50 1 1 4.75 6.00 107-729PV 2-1/2" 8.04 1 2 3.90 8.27
PF 12746 2-1/2" 7.40 1 1 5.50 6.00 107-730PV 3" 10.60 1 2 4.42 8.92
PF 12802 3" 8.50 1 1 6.00 6.00 107-731PV 4" 17.44 1 1 5.74 10.24
PF 11940 4" 12.70 1 1 7.50 6.00

15
 | TOOLS & JAWS

TOOL & JAW COMPATIBILITY

Using the performance requirements outlined in ASME B16.51, and in-house testing requirements in conjunction
with operational instructions provided by various tool and jaw manufacturers, the tools and jaws listed below are
compatible with Streamline PRSTM fittings.

It is important to follow the specific manufacturer’s guidelines for best use and practice and for required and
periodic maintenance of both the tool and jaws used in copper press systems. Failure to do so may void the
tool and jaw manufacturers’ warranties and cause improper pressing of fittings.

For additional information regarding manufacturers’ tools and/or jaw sets, refer to the individual websites
of the specific manufacturer. Individual tool and jaw manufacturers recommended maintenance and calibration
schedules vary. Be sure to follow the instructions specific to the brand of tool and jaw set being used.

1/2" — 2"
• Milwaukee M12 Tool w/Compact Jaws 1/2” — 1-1/4”
• Milwaukee M18 FORCE LOGIC™ Tool w/Standard Jaws 1/2” — 2”
• NIBCO Mini Tool w/Mini Jaws 1/2" — 1”
• NIBCO Standard Tool w/Standard Jaws 1/2” – 2”
• REMS Mini Tool w/Mini Jaws 1/2” — 1-1/4”
• REMS Standard Tools w/Standard Jaws 1/2” — 2”
• Ridgid Compact Tools w/Compact Jaws 1/2” — 1-1/4”
• Ridgid Standard Tools w/Standard Jaws 1/2” — 2”
• Rothenberger Compact Tool w/Compact Jaws 1/2“ — 1”
• Rothenberger Standard Tools w/Standard Jaws 1/2” — 2”
• Klauke UPA Tool w/Standard Jaws 1/2” — 2”
• Klauke MAP Tool w/Mini Jaws 1/2” — 1-1/4”

2-1/2" — 4"
• Milwaukee M18 FORCE LOGIC™ Tools w/Rings & Ring Jaw
• REMS Standard Tools w/Rings & Z5 Adapter Tong
• Ridgid Standard Tools w/ Rings & V2 Actuator Jaw

*FORCE LOGIC™ is a trademark of Milwaukee®

16
 ENGINEERING DATA |

APPLICATIONS
Streamline PRSTM fittings are designed to be joined with ASTM B88 seamless copper water tube (K, L, & M)
in residential and commercial plumbing and mechanical systems. Listed below are common applications
approved for Streamline PRSTM fittings.

Compatible with
Types of Service Comments Pressure Temperature
EPDM Seal

Fluids/Water Potable
Hot and Cold Water — 200 PSI 32°F to 250°F a
Rainwater / Grey Water — 200 PSI -20°F to 250°F a
Chilled Water Ethylene Glycol / Propylene Glycol 200 PSI -20°F to 250°F a
Hydronic Heating Ethylene Glycol / Propylene Glycol 200 PSI -20°F to 250°F a
Up to 50% Ethylene Glycol or
Cooling Water
Propylene Glycol solution
200 PSI -20°F to 250°F a
Low-Pressure Steam — UP TO 15 PSI 248°F a
Fuel, Oil and Lubricant
Ethanol Pure Grain Alcohol 200 PSI — a
Gases
Compressed Air Less than 25mg/m3 oil content 200 PSI Up to 140°F a
Oxygen - O2 (non medical) Keep oil and fat free/non-liquid O2 140 PSI Up to 140°F a
Nitrogen - N2 — 200 PSI Up to 140°F a
Argon Welding Use 200 PSI Up to 140°F a
Hydrogen - H2 — 125 PSI Up to 140°F a
Max 29.2 inches
Vacuum —
of Mercury
Up to 140°F a
Carbon Dioxide - CO2 Dry — Up to 140°F a
Contact Customer Service for information on applications not listed and applications
outside the temperature and pressure ranges listed above.

Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal.

17
 | INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS — 1/2" — 2"

1. Cut tube square using a tube

cutter or fine tooth saw. 2. Deburr tube ID using a
deburring tool. 3. Deburr tube OD using half
round file. 4. Sand tube with OD sand cloth.
Tube surface should be free
of indentation, scratches, and
deformations.

5. Check fitting bead to ensure

seal is present. Do not use any
type of oil lubrication.
6. Mark tube to proper fitting
insertion depth (see Insertion
Depth Chart below).
7. Turn slightly while sliding
press fitting onto tube. Slide
all the way to insertion mark
8. Place press tool at a right
angle over fitting bead. Start
the pressing process. Please
and make contact with stop. see specific tool manufacturer
for tool instruction.
Streamline PRSTM Fitting Insertion Depth Chart (1/2" — 2")
Tube Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Insertion Depth 3/4" 7/8" 7/8" 1" 1-7/16" 1-9/16"

Streamline PRSTM fittings must be connected with approved press tool.

Please see specific tool manufacturer for tool instruction.

INSTALLATION INSTRUCTIONS — 2-1/2" — 4"

1. Cut tube square using a tube

cutter or fine tooth saw. 2. Deburr tube ID using a
deburring tool. 3. Deburr tube OD using half
round file. 4. Sand tube with OD sand cloth.
Tube surface should be free
of indentation, scratches, and
deformations.

5. Check fitting ends to ensure

seal, grip ring and nylon
spacer are present Do not use
6. Mark tube to proper fitting
insertion depth (see Insertion
Depth Chart below).
7. Turn slightly while sliding
press fitting onto tube. Slide
all the way to insertion mark
8. Place press-ring at a right an-
gle over fitting bead and check
for proper engagement. Start
any type of oil lubrication. and make contact with stop. the pressing process. Please
see specific tool manufacturer
for tool instruction.
Streamline PRSTM Fitting Insertion Depth Chart (2-1/2" - 4")
Tube Size 2-1/2" 3" 4"
Insertion Depth 1-3/4" 1-7/8" 2-1/8"
! WARNING
Large diameter (2-1/2" – 4") Streamline PRSTM Failure to follow all instructions could affect joint/system
fittings must be connected with approved integrity and may lead to property damage. Call Customer
press tool and press-rings. Please see specific Service at 1-800-FITTING if you have any questions or need
tool manufacturer for tool instruction. assistance.

Streamline PRSTM Recommended Pressure Testing: Unpressed connections are located by pressurizing the
system with air or water. When testing with water the proper pressure range is 15 PSI TO 50 PSI maximum. Leak
testing with air can be dangerous at high pressures. When testing with compressed air the proper pressure is up
to 15 PSI maximum. Following a successful leak test, the system may be pressure tested up to 200 PSI if required
by local code requirements or project specifications.

18
 FEATURES |

SURE PRS™ SEAL TECHNOLOGY

O-RING INSIDE FITTING

• Available in 1/2” – 2” fitting designs.

• Proprietary EPDM O-ring seal with circumferential leak path.
• When connected but not pressed, the fitting will leak at multiple
points of the fitting hub, identifying un-pressed fittings.
• Special system testing procedures are required for fittings
with leak detection. (See page 20 for instructions)

DUOBITE™ GRIP RING

GRIP RING DETAIL

• Available in 2-1/2” – 4” fitting designs.*

• Dual rows of matching stainless steel teeth provide maximum joint strength.
• Stainless steel teeth “bite” into the tube when the joint is pressed.

*2-1/2” – 4” connections are inherently “leak detecting”. Before pressing, fittings are loose on the tube,
allowing for water/air flow and easy identification of un-pressed connections.

19
 | TESTING WITH LEAK DETECTION

TESTING INSTRUCTIONS FOR FITTINGS WITH LEAK DETECTION

Pressure Testing Leak Testing with Water

When installing Streamline PRSTM fittings it is 1. When the system, or portion of the system, is
recommended to perform a leak test in order to locate installed and isolated, pressurize to 50 PSI
any un-pressed fittings. To assist in making that maximum using clean potable water.
testing more reliable, Streamline PRSTM fittings
come with a leak detection feature. The following 2. The system should stabilize over the next
procedures allow installers to detect un-pressed fittings several hours and the pressure should be moni-
in a system under pressure prior to concealment. tored with a pressure gauge.

Leak Testing with Air 3. If the pressure has dropped, add more pressure
to bring the system back up to the 50 PSI desired
1. When the system, or portion of the system, is initial test level. Bleed off excess pressure.
installed and isolated, pressurize to 15 PSI
maximum using dry clean air, carbon dioxide 4. Allow time for complete system stabilization.
or nitrogen charge If upon inspection the system pressure has
dropped below 50 PSI test level, there is likely
2. The system should stabilize over the next an un-pressed fitting leaking.
several hours and the pressure should be
monitored with a pressure gauge. 5. Leaks are easily identified by leaking water.

3. If the pressure has dropped, add more pressure 6. Once any un-pressed connection has been tested
to bring the system back up to the 15 PSI desired and repaired, repeat the testing process until
initial test level. Bleed off excess pressure. 50 PSI pressure is maintained for 24 hours or
for the duration of time and pressure specified
4. Allow time for complete system stabilization. by local authority codes.
If upon inspection the system pressure has
dropped below 15 PSI test level, there is likely Once either testing procedure has been
an un-pressed fitting leaking. completed and verified, water/air pressure
can be increased to the working pressure
5. Leaks are easily identified either by use of design of the system, not to exceed the
commercial leak test solution or soap and water maximum rated pressure.
mixture, which will form bubbles identifying an
un-pressed leak point.

6. Once any un-pressed connection has been tested

and repaired, repeat the testing process until
15 PSI pressure is maintained for 24 hours or
for the duration of time and pressure specified
by local authority codes.

20
 INSTALLATION GUIDELINES |

TUBE SELECTION TOOLS & JAWS

Streamline PRSTM fittings are designed to be joined with Installer shall be qualified and licensed within the
ASTM B88 (Types K, L, M) hard-drawn copper tube jurisdiction, and familiar with the installation of copper
(1/2" - 4") and soft copper tube (1/2" - 1-1/4"). press joint systems.

Copper tubing made to ASTM B88 may contain surface Streamline PRSTM copper press fittings shall be
imperfections, which are specifically defined and installed using the proper tool, jaws, actuator, and rings
allowed by the standard. This product is handled and as instructed by the respective press fitting and press
stored multiple times before reaching the actual point tool manufacturer.
of installation, potentially leading to further scratches,
nicks or dents. ASTM B88 copper tube was designed DISTANCE BETWEEN JOINTS
for joining with solder and braze alloys – both of which
Mechanical joint pressing causes some degree of
are excellent gap-fill materials.
deformity to the tubing. To prevent leaks, minimal
Those who specify and/or install press systems must distances between press joints are set forth in the
be aware of the inherent trade-offs that accompany the table below.
decision to utilize press technology and o-ring seals.
Installers should recognize surface scratches and deep
incise marks (identification stamping) on the tube and
avoid placing o-ring seals directly over these surface minimum distance
irregularities in order to reduce the risk of leaks.
Sanding and cleaning the surface may or may not
eliminate this concern.

STORAGE AND HANDLING

Streamline PRSTM fittings are packaged in polybags to
keep them clean and free from debris. While unlikely to
be needed, the polybag also serves to keep fittings and MINIMUM DISTANCE BETWEEN STREAMLINE PRSTM JOINTS
o-ring seals together in the event that one were to be TUBE DIAMETER MINIMUM DISTANCE REQUIRED
dislodged in transit. Prior to installation, it is highly NOMINAL INCH INCH MM
recommended that a thorough visual inspection of
1/2" — —
the fittings be performed. Fittings should be handled
3/4" — —
with care and opened just prior to use, to ensure their
cleanliness. 1" — —
1-1/4" 7/16" 10
The tubing and fittings should be carefully handled 1-1/2" 5/8" 15
during shipment and unloaded with reasonable care. 2" 3/4" 20
Protect the stored product from moisture and dirt.
2-1/2" 5/8" 15
Elevation above grade and away from concrete is
3" 5/8" 15
desirable.
4" 5/8" 15

In the event press fittings are dropped, exercise the

utmost care in visually inspecting them to assure that
fittings have not been damaged or deformed.

21
 | INSTALLATION GUIDELINES

PRESSING SPACE LIMITATIONS

Press tool and jaw sets can be difficult to get into some tighter spaces. In these instances it is recommended that,
when possible, to preassemble product away from these space restricted areas. These assemblies can then be in-
stalled to minimize the potential for improper alignment of the pressing tools and jaws. For most press joints, use
of the press tools and jaws will not pose spatial issues. The following guidelines are recommended for standard
installations.

1/2” – 2” PRESSING WITH STANDARD JAWS – CLEARANCE REQUIREMENTS

TUBE A minimum B minimum TUBE A minimum B minimum C minimum

DIAMETER INCH MM INCH MM DIAMETER INCH MM INCH MM INCH MM
1/2 3/4 19 1-5/8 41 1/2 7/8 23 1-3/8 35 2-1/2 64
3/4 7/8 22 2-1/8 54 3/4 1 26 1-1/2 38 2-1/2 64
1 1 26 2-1/2 64 1 1-1/8 29 1-3/4 45 3 76
1-1/4 1-1/8 29 2-7/8 73 1-1/4 1-1/4 32 2-1/4 57 3-1/8 80
1-1/2 1-3/4 45 3-1/2 89 1-1/2 1-7/8 48 1-1/2 64 3-3/4 95
2 2 51 4-3/8 111 2 2-1/8 54 3-1/8 80 5 127

1/2” – 1-1/4” PRESSING WITH COMPACT JAWS – CLEARANCE REQUIREMENTS

TUBE A minimum B minimum TUBE A minimum B minimum C minimum

DIAMETER INCH MM INCH MM DIAMETER INCH MM INCH MM INCH MM
1/2 3/4 19 2 51 1/2 7/8 23 1-3/8 35 2-1/2 64
3/4 7/8 22 2-3/8 60 3/4 1 26 1-1/2 38 2-3/4 70
1 7/8 26 2-5/8 67 1 1-1/8 29 1-5/8 41 3 76
1-1/4 1-1/8 28 3-1/8 85 1-1/4 1-5/8 39 2-1/8 53 3-3/8 85

22
 INSTALLATION GUIDELINES |

2-1/2” – 4” PRESSING WITH PRESS RINGS – CLEARANCE REQUIREMENTS

1 Wrap the press ring around the press fitting with the
opening facing away from you. 2 Close the press ring tight around the fitting

3 Rotate the press ring until the actuator jaw receptacle

is facing toward you. 4 Properly insert actuator jaw and begin the
pressing procedure.

PROCEDURE FOR LAYING THE COPPER PRESS RING AROUND THE

STREAMLINE PRSTM FITTING WITH MINIMUM SPACE REQUIREMENTS

Actuator Actuator

TUBE A INCH B INCH TUBE A INCH B INCH C INCH TUBE A INCH B INCH C INCH
DIAMETER (MM) (MM) DIAMETER (MM) (MM) (MM) DIAMETER (MM) (MM) (MM)
4-1/8 6 4-1/8 6 4-1/2 6-3/16 6-15/16 2-7/16
2-1/2 2-1/2 2-1/2
(105) (152) (105) (152) (114) (157) (176) (62)
4-3/8 7 4-3/8 7 4-7/8 7-7/16 8-13/16 2-7/16
3 3 3
(111) (178) (111) (178) (124) (189) (224) (62)
5 8 5 8 5-3/4 8-1/16 10-7/16 2-7/16
4 4 4
(127) (203) (127) (203) (146) (205) (265) (62)

23
 | INSTALLATION GUIDELINES

SOLDER OR BRAZING NEAR AN EXISTING PRESS CONNECTION

To ensure proper sealing of the soldered/brazed joint and TUBE DIAMETER
SOLDERING BRAZING
MINIMUM DISTANCE MINIMUM DISTANCE
the press connection, a minimum distance between the NOMINAL INCH
INCH MM INCH MM
two connections must be maintained.
1/2" 1-1/2" 38 4-1/2" 114

When soldering near a Streamline PRS connection, the

TM 3/4" 2-1/4" 57 6-3/4" 172

installer must remain at least three tube diameters away 1" 3" 76 9 229
from the connection to prevent damage to the sealing el- 1-1/4" 3-3/4" 95 11-1/4" 286
ement of the press fitting. When brazing, the installer must 1-1/2" 4-1/2" 114 13-1/2" 343
remain at least nine tube diameters away from the connec- 2" 6" 153 18 457
tion. The installer should take precautions to keep the press
2-1/2" 7-1/2" 191 22-1/2" 572
connection cool. These methods may include 1) wrapping
3" 9" 229 27 686
the press connection with a cold wet cloth, 2) fabricating
solder connections prior to installing the press fitting, or 3) 4" 12" 305 36 915

applying spray-type cooling gels.

PRESSING NEAR AN EXISTING SOLDERED OR BRAZED CONNECTION

The minimum distance required when pressing TUBE DIAMETER MINIMUM DISTANCE
connections near an existing brazed joint is two pipe diam- NOMINAL INCH INCH MM
eters. To ensure proper sealing of both the soldered and 1/2" 1/4" 7
press connections, minimum spacing between connections
3/4" 1/4" 7
must be maintained. Always make sure there is no residual
1" 7/16" 11
solder or other debris on the tubing to be inserted into the
Streamline PRSTM fitting. 1-1/4" 7/16" 11
1-1/2" 5/8" 16
2" 3/4" 19
2-1/2" 1/4" 7
3" 1/4" 7
4" 1/4" 7

RELIABLE
24
 FAQs |

FREQUENTLY ASKED QUESTIONS:

Streamline PRSTM Fittings for Use in Copper Tube Systems

1. What is the Streamline PRSTM system rated for regarding pressure and temperature?
200 PSI over a temperature range of -20° F to 250° F.

2. For what types of applications is the Streamline PRSTM system approved?

Residential and commercial plumbing and mechanical systems.

3. For what types of media is the Streamline PRSTM system designed?

Hot and cold domestic water, potable drinking and cooking water, condenser and chilled
water, and water glycol mixtures of ethylene or propylene glycol up to 50% at 200° F.

4. What products are included in the Streamline PRSTM system offering?

Copper fittings in sizes 1/2” to 4” including couplings, elbows, tees, caps, adapters,
fitting reducers, unions and flanges.

5. What tubing can be used with Streamline PRSTM fittings?

K, L, and M hard drawn copper water tube (1/2” to 4”) and soft (annealed)
copper tube (1/2” to 1-1/4”.)

6. What is the warranty for Streamline PRSTM fittings?

50-year limited warranty.

7. How long will the EPDM seal last in Streamline PRSTM fittings?
The EPDM seal carries the same warranty as the fitting in which it is
installed — 50 years.

8. What performance tests were performed on the Streamline PRSTM fittings?

Certification to IAPMO PS-117 and ASME B16.51 requires the following tests:
hydrostatic burst strength, unrestrained hydrostatic pressure, dynamic torque,
static torque, bending, vacuum pressure, cyclic pressure, vibration and thermocycling.

9. What pressing tools can be used with the Streamline PRSTM system fittings?
Most pressing tools on the market can be used, but always refer to the
Tool & Jaw Compatibility Chart.

10. Can a Streamline PRSTM fitting connection be re-crimped?

Yes. However, for 1/2” to 2” joints, the pressing jaws must be positioned on the
same hex flats as the original crimp.

11. Is the Streamline PRSTM system approved for use underground?

Yes, in accordance with local plumbing codes.

25
 | FAQS

12. Are Streamline PRSTM fittings lead free?

Yes. They have been tested and are certified to NSF/ANSI-61 and NSF/ANSI-372.

13. Are Streamline PRSTM system seals lubricated?

The seals are lubricated as part of the manufacturing process when they are inserted
into the press fittings.

14. Can Streamline PRSTM fittings be installed in a system subject to freezing?

Care should always be taken when installing any system in severe freezing conditions.
Systems exposed to freezing conditions should be protected per local plumbing codes.

15. Can a Streamline PRSTM fitting be installed in tight spaces?

Yes, as long as there is sufficient clearance around each joint to allow for the
pressing tool and jaw to crimp without interference.

16. What does EPDM stand for?

Ethylene-Propylene Diene Monomer

17. How far away from a Streamline PRSTM connection can another fitting be
soldered or brazed?
Soldering should not occur less three pipe diameters from an installed press fitting.
Brazing should not occur less than nine pipe diameters from an installed press fitting.
The installer should protect the press connection by use of a wet rag
or cooling gel.

18. How far away from a soldered or brazed can a Streamline PRSTM be installed?
A Streamline PRSTM fitting can be installed two pipe diameters from an existing
soldered or brazed connection. The installer should take precaution to ensure there is
no residual solder or braze material on the sealing surface and that the tube is not hot.

19. How close together can two Streamline PRSTM connections be pressed?
See Minimum Distance Between Streamline PRSTM Joints for distance between
press fittings.

20. What are the most common errors made when installing a Streamline PRSTM system?
Not adequately deburring the end of the tubing, and not inserting the tube far enough
into the press fitting.

21. Can Streamline PRSTM fittings be installed in a refrigeration system?

No. The EPDM seals are not compatible with refrigerants, and the pressure rating
of the system is not sufficient for many refrigerant gases.

26
| NOTES

27
 Distributed by Mueller Streamline Co. • 150 Schilling Blvd., Suite 201, Collierville, TN 38017
800-348-8464 • www.muellerstreamline.com
MLT-361 • MAY 2019