Service Manual: DV-600S DV-600H
Service Manual: DV-600S DV-600H
Service Manual: DV-600S DV-600H
DV-600S
DV-660H
DV-600H
SERVICE MANUAL
S59F9DV-600S/
DV-600S
OPEN/CLOSE
VIDEO
MIN MAX
POWER PHONES
SERVICE MANUAL
LEVEL
PHONES
MODELS DV-600H
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
DVD VIDEO PLAYER
CONTENTS
Page
1. IMPORTANT SAFEGUARDS AND PRECAUTIONS ...................................................................... 1-1
2. FEATURES/3. SPECIFICATIONS .................................................................................................. 2-1
4. PART NAMES ................................................................................................................................. 4-1
5. MAINTENANCE CHECK ITEMS AND EXECUTION TIME ............................................................ 5-1
MODELS DV-600S/600H
SHARP CORPORATION
1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
2. FEATURES
• Plays DVD, video CD and CD (Digital Audio) discs
• Built-in Dolby Digital (AC-3) decoder supporting Dolby Pro Logic*1 decoding and Virtual Surround
• MPEG 2-channel (STEREO) decoder (From AUDIO L/R)
• MPEG MULTI digital out capability (5.1ch)
• New Digital Gamma correction and New Digital Super Picture functions
• RGB OUT (LINE1 OUT)/S-VIDEO OUT
• DTS*2 digital output capability
*1 Manufactured under license from Dolby Laboratories, "Dolby", "Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
*2 "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.
3. SPECIFICATIONS
Signal System: NTSC*1 /PAL
(*1 : A played back NTSC is a modified PAL signal.)
Video output: Output connector: Pin-jack/21-pin Euro-SCART
Output level: 1 Vp-p (75Ω)
S video output: Y output level: 1 Vp-p (75Ω)
C output level: 0.30 Vp-p (75Ω)
Output connector: S connector
Audio output: Output connector: Pin-jack/21-pin Euro-SCART
Output level: 2 Vrms (1 kHz, 0 dB)
Digital audio I/F: Optical digital output: Optical connector
Audio output: Coaxial digital output: Pin-jack
Headphone output: Output connector: Standard jack
Video signal horizontal resolution: 500 lines (DVD)
S/N ratio: 60 dB (DVD)
Audio signal frequency characteristics: For DVD linear PCM playback:
4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
CD playback: 4Hz to 20 kHz (EIAJ)
(MPEG 1/2 Audio)
S/N ratio: CD: 105 dB, 1 kHz (EIAJ)
Dynamic range: DVD linear PCM: 94 dB (EIAJ)
CD: 94 dB (EIAJ)
Total harmonic distortion ratio: CD: 0.006% or less (EIAJ)
Operating temperature: 5°C to 40°C
Storage temperature: –20°C to 55°C
Power supply : 220 V to 240 V AC, 50/60 Hz
Power consumption: 16 W (0 W when switched off)
Dimensions: 270 mm × 338 mm × 80 mm (W × D × H) (Including attachments)
Weight: 2.5 kg
Digital Output
· The digital output format (optical or coaxial) used in this DVD player is linear PCM audio sampling at 44.1 kHz or 48 kHz.
Linear PCM sound for DVD video discs sampled at 96 kHz cannot be output digitally.
Check the disc jacket for information on the audio sampling used.
3-1. ACCESSORIES
Accessories: Video/audio cord x 1, AC power cord x 1, UM3 battery x 2,
Remote Control Unit x 1
2-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
4. PART NAMES
4-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
5-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
(A) x2 1
2. Remove two screws (B).
3. Remove one screw (C).
(F) x4
4. Release the hooks of the front panel at two places on both sides
and at three places on the bottom, and slide the front panel toward (D)
(B) x2
you.
5. Disconnect the connectors (D) and (E).
6. Remove four screws (F) which installs the mechanical unit.
(E)
Hook
Front panel
(C) Hook
7. Disconnect the lead lines (G) and (H) and (J) from the main PWB (H)
(Q) x2 (W)
15. Remove three screws (T) which install the volume PWB of the
(V)
front panel.
16. Remove three screws (U) which install the operate PWB.
Volume PWB (T) x3
* The spacer and insulation seat under the indication tube of (V)
and (W) are bonded with both-side sticking tape.
17. Remove one washer (X) and one nut (Y) which install the
(U) x3
shuttle knob.
(X)
Shuttle knob
6-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Insert a thin plate into the hatching part, slowly move the it in the arrow direction so that the tray is moved out a little in the arrow direction.
Note: In this state the tray cannot be removed completely.
Tray Decoration Panel
· Drive Unit State
VIDEO
Slowly move in the arrow direction, using the screwdriver having a fine head.
<Disassembling and assembling the mechanism chassis>
1. Remove the pickup FPC and loading relay FFC A from the main PWB.
Note: Fit the conductive rubber cap to the front end of pickup FPC (short-circuit).
2. Remove the solder joint of loading relay PWB at drive unit rear side.
1 Sled motor lead wire (Yellow·Orange) 1
2 IN SW lead wire 2 (White) 3 2 1
3 Spindle motor lead wire (Red·Black)
Orange
Yellow
White
White
Black
Red
SLmotor 2
SLmotor 1
Black L motor2
4
Red L motor2
C
Remove the lead wire.
B A
4
3. Remove the relay PWB mounting screw B (M2.6S + 6S S tight), and remove the relay PWB C .
Relay PWB
Conductive rubber cap
(Earth sponge)
Clamper top
plate rear side A
A P tight screw
with M2.6 washer
Slide rack
E
6-2
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
5. Disassembling the loading drive system
(1) Remove the two M2 screws A . (4) Remove relay gear 2 E .
(2) Remove the tray pinion B . (5) Remove the two M1.7 screws F .
(3) Remove the relay gear 1 C together with the (6) Remove the L motor G (with pulley) downward.
timing belt S D .
M2 A
Timing belt S D
6. Disassembling the mechanism chassis from the moving chassis
(2) Remove the insulator B (2 pcs. at the right side in diagram) parallel in the arrow direction.
(At this time it is better to insert the fine head of screw driver at the ID side of insulator and to move in the arrow direction, which
facilitates removal.)
(3) Remove the mechanism chassis in the arrow direction, pulling upward aslant.
At this time take care so that the insulator C (left side, 2 pcs.) is not damaged. (Do not put at once the mechanism chassis
assembly.) Insulator C
Insulator B
Mechanism chassis
Insulator B
Insulator C
Apply screw-lock.
6-3
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
7. EXPLANATION OF MECHANISM
(1) Tray loading mechanism
When the tray loading motor rotates counterclockwise, motion is transmitted to the slide rack D through the intermediate
gear 1 A , intermediate gear 2 B and tray pinion C , resulting in insignificant motion in the arrow direction.
The slide rack is linked with the operating chassis. It lowers the pickup mechanism.
The protrusion of slide rack E is linked with the tray through the groove at the rear side of tray, so that the tray is
pushed ahead a little. When the tray is pushed out, the slide rack is disconnected from the tray pinion, and at the same
time the gear at the rear side of tray is connected with the tray pinion, and the tray is pushed ahead.
When the tray is pushed out fully, the slide rack moves further in the arrow direction through the groove at the rear side
of tray. The tray position detection switch F is turned on, and the tray loading motor stops.
When the tray closes the operation is as follows. If the tray OPEN/CLOSE button or tray is pressed and the detection
switch is turned off, the tray loading motor rotates clockwise, so that the tray is retracted. When the detection switch
is turned on again, the tray loading motor stops.
This groove is linked with the pawl of
pickup mechanism.
Tray pinion C
Sled pinion B
Pickup D
Sled motor A
7-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
8. OPERATION OF PICKUP
8-1. CIRCUIT CONFIGURATION OF PICKUP
The pickup unit reads signals from the disk, and the flexible cable is connected to the board. The following signals flow through the
cable.
TR–
1 TR– Focus When electric current is flowed
TR+
2 FO+ FO+, FO- from FO+ to FO-, the lens comes
FO–
3 TR+ to near the disk.
ACTUATOR Power adjust 4 FO– Tracking When electric current is flowed
HIGH-FREQUENCY CONVOLUTION 5 VR TR+, TR- from TR+ to TR-, the lens goes
VOS
OSC 6 PD toward the outer circumference.
7 VCC Gain switching DVD one Layer High gain
LD 8 GND
(NC)
Sga DVD two Layer Sga : +5V
PD 9 LD CD
VA 10 GND
–
+
VB 11 VOS
–
+
VC 12 NC
–
+
– VD 13 NC
+
Sga Vref(VCC/2)
14
Vraf VA
15
Vcc VC
16
GND Sga
17
HOLOGRAM LASER UNIT
18 GND
19 VB
20 VD
1
Actuator assembly
8-4-3. Monitor Diode (PD)
Since the laser diode largely varies output of the laser light even if the flowing current is slightly varied, the projection
light is detected with the monitor diode to control the laser light to be equally output.
Since the current varies on the monitor diode according to the intensity of the received light of the laser diode, the drive current of
the laser diode is reduced if the current of the monitor diode increases. On the contrary, the drive current of the laser diode is increased
if the current of the monitor diode decreases.
As the projection light of the laser diode becomes stronger, the current of the monitor diode increases to increase the current which
flows into the monitor diode output (PD). This is input to the pin 44 of IC303 and is compared with the reference voltage to control
the drive current of the laser diode.
The circuit is called ALPC (Automatic Laser Power Control).
Monitor Diode Laser Diode
8-4-4. Laser diode drive current control (LD)
Power supply to drive the laser diode
Basic Structure of Laser Diode
8-4-5. High-frequency convolution module power supply (VOSC)
The high-frequency convolution imposes the high-frequency signal on the DC current to impose the high frequency on the drive
current of the laser. Thus, the interference of outgoing light and reflected light is prevented.
LD
8-4-6. HF Signal (VA, VB, VC, VD) PD
When the quantity of laser light increases, the current shown in
Signals recorded in the disk figure increases and the PD terminal voltage rises.
IC303 is used to control. The LD terminal voltage lowers, and
the quantity of light reduces. (IC303 is actuated by voltage
input.)
8-1
Downloaded from www.Manualslib.com manuals search engine
Transition of test mode status (1)
9. TEST MODE Memory Test
Memory Test Mode Program version indicaiton.
Video Test Mode Ordinary test pattern indication, and copy guard signal added test Test0 Key
'4' Key Digitron All
pattern indication are given. Systest( )
The Lighting
System( ) Test
Mecha Test Mode Servo system initialization, tray opening and closing, laser, servo, (0xF100)
continuous playback, jump test are performed.
'1' Key '3' Key
Servo adjustment Servo version indication, VC/FE/TE/RF AVRG, TRVSC, RF
SystemMode
value read mode LEVEL, FO BIAS, FO GAIN, TR GAIN indication are given. =
0xF100-0xF1FF
Memory Test Dinamic
9-1. EXPLANATION OF OPERATION AT THE SYSTEM START Model number
'2' Key Test
Program version
Test Mode Operation Region code
microcode version
Initial resetting
Video
Test
9-1
value display key 10000001 ********
(last (Model
update)Number)
OSD
Adjustment No Disc and Play Key
value display Test 0 (F0h) key
Program Version display
Power
Off
ErrDisplay0 ErrDisplay1
'4' Key
Digitron All
Systest( ) 10000002 ********
The Lighting (Program version)
Branching Test
Play Key
with ten keys
Region code display
Power
ErrDisplay0 ErrDisplay1
Off
'1' Key Test0 10000003 ********
Test0 Key (Region code)
Key Play Key
'2' Key '3' Key
Microcode version
display
Transition of test mode status (2) Transition of test mode status (3)
Video Test Digitron All Dinamic Test
'4' Key
The Lighting
Test0 Key Test Systest( )
Test0 Key (0xF100)
System( ) SysTest( )
(0xF100) System( ) '1' Key '4' Key
9-2
Open/Close Key Note: Tray Err is not
Play Test0 or hand-push Wait retried in the mode.
key Key
Play '2'
key
'STILL'
'PLAY' or 'STILL'
'PLAY'
SRVPlayTest( )
'PLAY' ErrDisplay0 ErrDisplay1 In the continuous replay mode, the current sector
DD000300 ******** address is displayed on ErrDisplay 1.
DDT step 3 operation DDT step 3 operation
ErrDisplay0 ErrDisplay1 After RF gain is adjusted for a certain
ErrDisplay0 ErrDisplay1 DD00E203 4 6 11 EE
DD000203 4 6 11 00 time, the just focus is adjusted.
(for error)
After end, RF gain adjustment is started
9-3
'STILL' again.
Key Wait
'PLAY' or 'STILL'
'PLAY'
'STILL'
'PLAY' or 'STILL'
'PLAY'
DDT step 5 operation In SRV Play Test ( ), key is input and number of TR jumps is specified as follows.
DDT step 5 operation
ErrDisplay0 ErrDisplay1 Track gain is adjusted.
ErrDisplay0 ErrDisplay1 DD00E205 9 11 00EE
DD000205 9 11 0000 Key Name (Code) Jump Number of TRs Key Name (Code) Jump Number of TRs
(for error)
[1] 01h -1 [3] 02h +1
'STILL' DDT step 6 operation [4] 04h -102 [6] 06h +102
'PLAY' or 'STILL' On the 2-layer disc, the just focus [7] 07h -510 [9] 09h +510
adjustment and focus gain adjustment [Clear] 1Fh -511 [Memory] 1Ch +511
'PLAY' of layer 1 are done. [2] 02h -765 [Repeat] 35h +765
On CD, interrupt of SUB-Q is allowed, [5] 05h -766 [A-B] 36h +766
DDT step 6 operation
ErrDisplay0 ErrDisplay1 TOC is read/set, and mute is turned off. [8] 08h -7000 [Program] 1Eh +7000
ErrDisplay0 ErrDisplay1
DD000206 7 4 5 00(CD) DD00E206 7 4 5 EE(CD) [Skip(-)] 2Dh -15000 [Skip(+)] 2Eh +15000
8 5 0000(DVD) 8 5 00EE(DVD)
(for error)
'STILL' Servo adjustment value
'PLAY' or 'STILL' Reading-out mode [Next replay] = Layer Jump
'PLAY' AdjDisplay( ) * Here, key allocation may be changed.
(0xFF00)
* Layer jump operation is not guaranteed except during 2-layer DVD test.
DV-600S
DV-600H
OSD adjustment value display
DV-600S
DV-600H
1. Press "FOh" key during disc replay. (Multiple press of S. PICTURE and STOP)
Servo adjustment value 2. The following screen is displayed on OSD.
reading-out mode
3. OSD display is turned off with "FOh" key.
During stop in DVD/CD/VCD mode,
servo adjustment value reading-out
mode is selected if Test 1 key (F1h)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
DVDOpe( ) is input. CDOpe( )
(0x4000) Test1 (0x1000)
(F1h) Test1
After measurement is ended in the servo
key (F1h)
step test mode,the servo adjustment value 17 18 19 20 21 22 23 24 25 26
key
AdjDisplay(*) reading-out mode is selected.
(0xFF00)
Argument of AdjDisplay(*) SRV Step Test( ) (1) 1, 2 .................. 0-layer focus gain
is char 0:CD/1:DVD.
If the servo adjustment value reading-out (2) 3, 4 .................. 1-layer focus gain
mode is selected, disc is stopped.
(3) 5, 6 .................. 0-layer focus balance
(4) 7, 8 .................. 1-layer focus balance (In case of CD, 0-Layer focus balance after correction.)
(1)Servo version display
F1000001 ******** (5) 9, 10 ................ Track offset
9-4
(5)1-layer focus balance value display
F1000005 ********
'PLAY'
'PLAY'
10. TROUBLESHOOTING
FLOW CHART NO.1 FLOW CHART NO.6
The power cannot be turned on. Refer to the flow chart No.3 power trouble-shooting. The fluorescent display tube does not light.
No No
No Is 5V voltage supplied to the IC5001 pin 18? Check the AT 5V line.
Is the fuse normal? Replace the fuse.
Yes Yes
Is -30V voltage supplied to the IC5001 pin 16? No
Is normal state restored when the power cord is No Is there leaking or short-circuited primary side Check the AT -30V line.
once withdrawn and then inserted again after component? (Q9007, Q9010, D9016, T9001, Yes
several seconds? D9012-3, C9021-2, etc.) Is 4.0 MHz oscillation signal confirmed on the
No
IC5001 pins 19 and 20? Check FL5001, IC5001 and their periphery.
Yes Yes
No
Is the AT 5V line voltage normal? Check the signal lines of FIP DA, FIP CK, FIP CS
Yes No
of IC5001 and IC504. Check or replace IC5001 and IC504.
Is the voltage of AT 12V, AT -30V and filament No Check each rectifying circuit of secondary circuit. Yes
No
normal? Is the filament voltage supplied to both ends of Check the power circuit and D5001.
pins 1, 2 and 61, 62 of fluorescent display tube?
FLOW CHART NO.2 Yes
The power cannot be turned on. No
Check the fluorescent display tube and its periphery. Check for damages such as crack on the
10-1
Is there leaking or short-circuited primary side Check for short-circuiting of rectifying diode and
component? circuit in each rectifying circuit of secondary side. S8101
OPEN/CLOSE
FLOW CHART NO.4
When the output voltage fluctuates.
S8108
No STOP
Does the secondary side photocoupler circuit Check the circuit and replace the parts.
operate normally? (D9020,D9014,D9009-11,Q9006,Q9009,etc.) S8103
STILL/PAUSE
Yes
No
Does the primary side photocoupler circuit Check the circuit and replace the parts.
operate normally? (D9020,R9030,D9021-3,etc.)
Yes
Replace D9020. S8109
PLAY
FLOW CHART NO.5
FLOW CHART NO.8 KEY-1 KEY-2
When buzz is heard from the vicinity of power circuit.
Shuttle ring doesn't function.
No
Check for short-circuiting of rectifying diode and circuit in each rectifying circuit of secondary side.
Is there a wrong point in the ring installation It meets a symptom, it copes, or, part exchange.
(D9005-8,D9025,IC9001-3,Q9001,Q9005,etc.)
condition of shuttle switch and the switch itself?
Shuttle ring rotation direction Shuttle control signal Output wave shape
Yes
Clockwise direction J2~GND OFF
Is the control signal of 63 of IC504, 26 pin being
ON
inputted normally? (63pin→J1,26pin→J2)
J1~GND OFF
ON
J1~GND OFF
ON
DV-600S
DV-600H
FLOW CHART NO.9 FLOW CHART NO.13
The operation from the remote control is disabled.
The disc is ejected.
DV-600S
DV-600H
10-2
Replace IC702.
FLOW CHART NO.11 Yes
PC 3.3V is not output. No
Is the focus control drive voltage applied to the AB Check the line between the IC702 and the AB connector.
No connector pins 4 and 2?
Is 5V voltage supplied to the IC9003 pin 1? Check the secondary circuit AT 5V line. Yes
Yes Check the connection of optical pickup cable.
If it is normal, replace the optical pickup.
No
Is there output to the IC9003 pin 2? Check the IC9003 periphery circuit and AT 5V line.
Yes
Check for load circuit short-circuiting or leak. FLOW CHART NO.15
The disc is ejected.
(When the laser beam does not light.)
FLOW CHART NO.12
No
The disc tray cannot be opened and closed. Is the Q301 (LD POWER ON) drive signal (SEL) Check the line between the IC707 pin 52 and the Q301
output to the IC707 pin 52? base through Q304.
No
Is the signal from the IC504 pins 70 and 69 input Check the LD-REV/FWD signal line between the Is the Q307 (LD POWER CTL) drive signal (LDO1) heck the line between the IC303 pin 45 and the Q307 base.
into the IC702 pins 6 and 7? IC702 and the IC504. output to the IC303 pin 45?(Checking of symptom)
Yes Yes
Check AT 8V line. No
Is 3.3V voltage applied to the Q301 emitter? Is 5V Check the D 3.3V (1) line and the A 5V line.
No
No voltage applied to the Q307 emitter?
Is the loading motor drive voltage output from the Is 8V voltage applied to the IC702 pin 21?
Yes
IC702 pins 10 and 11? Yes No
Replace IC702. Are 3.3V and 2.3V voltages applied to the AB Check the line between the Q301 and Q307, AB connector.
Yes
connector pin 11 and 9, respectively?
No
Is the loading motor drive voltage applied to the Check the line between the IC702 and the AG connector. Yes
AG connector pins 3 and 2? Check the connection of optical pickup cable.
Yes If it is normal, replace the optical pickup.
Check for mechanism and gear engagement and
breakage.
FLOW CHART NO.16 FLOW CHART NO.19
Both video and audio do not operate normally. The signal is not output to 21PIN SCART. (The line output is OK.)
Yes <Video system>
Set the disc on the disc tray. Are the video signals output to the pins of main unit No Check the main unit.
connector CN801? (Make sure that the IC201, Q208-13, and IC2005
Yes
CN803 11Pin B-OUT, CN803 13Pin G-OUT peripheral circuit and control signal V-MUTE, RGB CTL
Is it possible to hold normally the disc with the chuck? No Check the loading switch. CN803 15Pin R-OUT lines are on "L" level.)
Yes
No Yes
Is the level of RF signal which is output from the Check for contamination of objective lens of optical pickup. Is specific signal input into the following terminals?
IC303 pin 28 normal? Is the B-OUT signal input into the pin 5 of CN2303? No Check the line between the pin 11 of CN803 and the pin 5
Yes of CN2303.
Is the G-OUT signal input into the pin 3 of CN2303? Check the line between the pin 13 of CN803 and the pin 3
Replace the main PWB unit. No of CN2303.
Replace the optical pickup unit.
Is the R-OUT signal input into the pin 1 of CN2303? Check the line between the pin 15 of CN803 and the pin 1
Yes
of CN2303.
Check the video amplifier unit and the audio amplifier unit. (IC2002-3, IC801) Is the 21P-Y signal input into the pin 7 of CN2303? Check the line between the pin 12 of IC2006 and the pin 7
of CN2303.
FLOW CHART NO.17 Is the 21P-C signal input into the pin 9 of CN2303? Check the line between the pin 2 of IC2006 and the pin 9
Both video and audio do not operate normally.(2) of CN2303.
Is the 21P-CVBS signal input into the pin 11 of Check the line between the pin 5 of IC2006 and the pin 11
CN2303? of CN2303.
10-3
Yes Check the V-MUTE line. Is the CVBS signal output to the pin 5 of IC2302?
Is the video signal output to each pin of IC2006? No No
IC2006 5Pin CVBS Make sure that the level of IC2006 pin 6 is "L" level. Yes
Are the pins 7 and Is the VIDEO OUT signal output to the pin 4 of SCART
IC2006 12Pin S-Y Yes No
12 of IC2302 on "L" R/V DRIVE circuit IC2304?
IC2006 2Pin S-C Check or replace IC2006. level? No
Yes
Check the periphery of SCART R/V DRIVE circuit IC2304.
Are the video signals output to the specific
output terminals?
No Check the periphery of Q2301, Q2302, and Q2303.
Is the composite video signal output to the Check the peripheral circuit of Cb/V DRIVE circuit
VIDEO OUT terminal(J2001)? IC2003 from the pin 5 of IC2006. Yes No
Is the luminance signal output to the S-OUT No Check the peripheral circuit of S-YC DRIVE circuit When "S-VIDEO" is selected with the signal Is the C-OUT signal output toQ2301,Q2303 of emitter?
terminal (J2002)? IC2002 from the pin 12 of IC2006. selection switch (SW2301) No
No No
Is the chroma signal output to the S-OUT Check the peripheral circuit of S-YC DRIVE circuit (1) Is the C-OUTPUT signal output to the pin 15 of Is the C-OUTPUT signal output to the pin 6 of IC2302?
terminal (J2002)? IC2002 from the pin 2 of IC2006. 21PIN SCART terminal (SC2201)?
(2) Is the Y-OUTPUT signal output to the pin 19 of No Is the 21P-Y signal output to the pin 5 of IC2302?
FLOW CHART NO.18 21PIN SCART terminal (SC2201)?
Both video and audio do not operate normally.(3) Yes
Are the pins 7 and Is the Y-OUT signal output to the pin 4 of SCART R/V
No
12 of IC2302 on "H" DRIVE circuit IC2304?
Set the disc and play. level? No
<Audio system> Yes Check the periphery of SCART R/V DRIVE circuit IC2304.
Are the audio signals output to the pins of main unit connector CN801? Is the VIDEO-OUTPUT signal output to the pin 19
CN801 1Pin FRONT-L of 21PIN SCART terminal (SC2201) when "VIDEO" No
CN801 3Pin FRONT-R Is the 21P VIDEO-OUTPUT signal output to the pin 5 of
is selected with the signal selection switch IC2302?
Yes No (SW2301)?
Yes
Are the audio signals output to the specific output Check the main unit.(IC801 circuit)
No Is the VIDEO OUT signal output to the pin 4 of SCART
terminals? Are the pins 7 and 12 of IC2302 on "L level?
No R/V DRIVE circuit IC2304?
Are the audio signals output to the FRONT-L/R Check the peripheral circuit of AUDIO AMP. circuit No
OUT terminal (J2001)? IC6001 from the pin 1,3 of CN801.
Check the periphery of SCART R/V DRIVE circuit IC2304.
DV-600S
DV-600H
DV-600S
DV-600H
11-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
• Block Diagram
CVBS/Cb/B 2Vdd
C/Cr/R 2Vdd
C/Fsync/VBI
Y/G Vdd
F/Vsync
Hsync
48 49 50 22 19 25
6 Y/G 1Vdd
copy
Sync_generator protection bus 3 CVBS/Cb/B 1Vdd
BG
DVdd 30 37, 57 9 C/Cr/R 1Vdd
DAC
CC_gen
WSS gen 0
5 Y/G 1
1 CVBS/Cb/B 1
DAC
H, V 0
Y off_set
39~46 2 CVBS/Cb/B 1
DVIA [7:0]
0
7 C/Cr/R 1
DAC
demux
52~55, 58~61
DVIB [7:0] 0 0 8 C/Cr/R 1
Cb
0 Modulator
Output Selector
Cr 12 Vref 1
BIAS
A/B_sel 51 0
11 Ibias 1
subcarrier
gen
20 Y/G 2
DAC
0
21 Y/G 2
0
RGB matrix 17 CVBS/Cb/B 2
DAC
TP 62
0 18 CVBS/Cb/B 2
Clock 29 23 C/Cr/R 2
DAC
24 C/Cr/R 2
Chip A 26 14 Vref 2
BIAS
bus 15 Ibias 2
Reset 31
I2C/SPI TEST
PAL/NTSC 32
MC44724/5A
33 34 35 36 27 10 13
DAVss
SO
TEST
SDA/SI
SCL/SCK
DAVdd
SEL
11-2
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
• Block Diagram
RFNOUT
RFPOUT
MIXOUT
COUT
DOUT
GND2
MIXIN
AOUT
BOUT
EOUT
FOUT
VCC2
24 23 22 21 20 19 18 17 16 15 14 13
MIX
1 2 3 4 5 6 7 8 9 10 11 12
GAINsel1
VCC1
GND1
EIN
S/DUAL
AIN
BIN
CIN
DIN
VrefIN
FIN
GAINsel2
11-3. IC303 IX1517GE RF SIGNAL PROCESSOR
Pin No. Terminal name I/O Operation function Terminal DC Voltage(TYP.) Remarks
1 GND – GND terminal. –
2 P2TP I TE+input (CD) VrA
3 P2TN I TE–input (CD) VrA
4 LDO2 O Drive ouput –
5 MDI2 I Monitor input –
6 VrA O Analog VREF 2.1[V]
7 VrD O Digital VREF – Vdd 1/2
8 Vdd I Power terminal 4.2V (3.3V)
9 DPAC – DPD AC combination capacity 1 –
10 DPBD – DPD AC combination capacity 2 –
11 DPD1 – DPD integral capacity 1 –
12 DPD2 – DPD integral capacity 2 –
13 SCB I Control line (Bit clock) 2.2[V]
14 SCL I Control line (Latch signal) 2.2[V]
15 SCD I Control line (Sirial Data) 2.2[V]
16 VRCK I Reference clock input 2.3[V] When frequency is increased, the
filters excepting the servo LPF are
shifted to high frequency side.
17 VCKF – Capacity for time constant adjustment –
18 VccP – Power terminal –
19 LVL O Servo addition output Vrd x (1/2)
20 TEO O TE output VrD
21 FEO O FE output VrD
22 DFTN I DPD difect – Low DPD output: Mute
23 VccS – Power terminal (servo) –
24 RPZ O RF ripple center voltage VrD
25 RPO O RF ripple output VrD
26 RPB O RF ripple bottom –
27 RPP O RF ripple peak –
28 RFO O Equalizing RF output 2.3[V]
29 NC – NC terminal – To be connected to GND
30 NC – NC terminal – To be connected to GND
31 VccR – Power terminal (RF) –
32 DPDB I Pit depth adjustment VrD When D PDB is raised, the A/B
side delay increases.
33 TEB I TE balance VrD When TEB is raised, the TP side
gain increases and the A+C side
delay increases.
34 FEB I FE balance VrD When FEB is raised, the A+C (FP)
side gain increases.
35 PSC I VRCK frequency division ON/OFF – High: Frequency division OFF
36 Vcc2 – Power terminal –
37 NC – NC terminal VrD To be connected to VrD, or to GND
through C
38 EQD I Group delay correction VrD When EQD is raised, the group
delay increases at the right side.
39 GND2 – GND terminal. –
40 RFDC – DC feedback capacity –
11-3
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Pin No. Terminal name I/O Operation function Terminal DC Voltage(TYP.) Remarks
41 RFA O RF total addition output 2.2[V]
42 EQB I Boost adjustment VrD When EQB is raised, the boost increases.
43 EQF I Frequency adjustment VrD When EQF is raised, shift to the
high frequency side occurs.
44 MDI1 I Monitor input –
45 LDO1 O Drive output –
46 P1TN I TE–input (DVD) VrA
47 P1TP I TE+input (DVD) VrA
48 NC – NC terminal – To be connected to GND
49 P1FN I FE–input (DVD) VrA
50 P1TP I FE+input (DVD) VrA
51 LDP1 I APC polarity 1 – Positive polarity when this terminal
is connected to Vcc.
52 P1DI I D input (DVD)
53 P1CI I C input (DVD) VrA
54 P1BI I B input (DVD) VrA
55 P1AI I A input (DVD) VrA
56 GNDR – GND terminal (RF) –
57 LDP2 I APC polarity 2 – Positive polarity when this terminal
is connected to Vcc.
58 P2AI I A input (CD) VrA
59 P2BI I B input (CD) VrA
60 P2CI I C input (CD) VrA
61 P2DI I D input (CD) VrA
62 GNDS – GND terminal (Servo) –
63 P2FP I FE+input (CD) VrA
64 P2FN I FE–input (CD) VrA
• Block Diagram
RFDC
GND2
LDO1
P1TN
P1TP
MDI1
Vcc2
EQD
EQB
EQF
PSC
RFA
FEB
TEB
NC
NC
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
P1FN 49 32 DPDB
APC1
P1TP 50 31 VccR
LDP1 51 30 NC
P1DI 52 29 NC
sel-RF
R-gain
P1CI 53 Adjust
EQ 28 RFO
P1BI 54 27 RPP
P1AI 55 sel-PD
RF Ripple 26 RPB
F-gain sel-IC creation
GNDR 56 Adjust 25 RPO
sel-FE
LDP2 57 FE creation
FE-gain 24 RPZ
F-gain Adjust
P2AI 58 sel-PD
Adjust 23 VccS
sel-TE
P2BI 59 sel-DPD
DPDTE 22 DFTN
creation TE-gain
P2CI 60 sel-LVL
mode-TE
Adjust 21 FEO
P2DI 61 sel-PD 20 TEO
T-gain Level detect
3BTE creation
GNDS 62 Adjust 19 LVL
P2FP 63 BUS
Time
constant
18 VccP
APC2 adjustment
P2FN 64 17 VCKF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
DPAC
DPBD
VRCK
DPD1
DPD2
LDO2
P2TN
P2TP
MDI2
GND
SCD
SCB
SCL
Vdd
VrD
VrA
11-4
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-5
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Pin No. Terminal name I/O Operation function Remarks
55 MOEN O External RAM output permission signal.
56 MWEN O External RAM read/write selection.
57 DVSS – Digital power. (0V) For logic cell
58 DVDD3 – Digital power. (3.3V) For logic cell
59 MA9 O External RAM address bus.
60 MA8 O External RAM address bus.
61 MA7 O External RAM address bus.
62 MA6 O External RAM address bus.
63 MA5 O External RAM address bus.
64 MA4 O External RAM address bus.
65 MA3 O External RAM address bus.
66 MA2 O External RAM address bus.
67 MA1 O External RAM address bus.
68 MA0 O External RAM address bus.
69 DVSS – Digital power. (0V) For I/O cell
70 DVDD5 – Digital power. (5V) For I/O cell
71 MD7 I/O External RAM data bus. TTL level
72 MD6 I/O External RAM data bus. TTL level
73 MD5 I/O External RAM data bus. TTL level
74 MD4 I/O External RAM data bus. TTL level
75 MD3 I/O External RAM data bus. TTL level
76 MD2 I/O External RAM data bus. TTL level
77 MD1 I/O External RAM data bus. TTL level
78 MD0 I/O External RAM data bus. TTL level
79 SD7 O MPEG data output.
80 SD6 O MPEG data output.
81 SD5 O MPEG data output.
82 SD4 O MPEG data output.
83 DVSS – Digital power. (0V) For logic cell
84 DVDD3 – Digital power. (3.3V) For logic cell
85 SD3 O MPEG data output.
86 SD2 O MPEG data output.
87 SD1 O MPEG data output.
88 SD0 O MPEG data output.
89 SERR O MPEG data reliability flag. (Data error: “L”)
90 SOSO O MPEG output sector sync signal. (Sector top: “L”)
91 SVAL O MPEG data effective flag. (Effective state: “L”)
92 SDCK O MPEG data transfer clock.
93 DVSS – Digital power. (0V) For logic cell
94 SREQ I MPEG data request flag. (Request state: “L”) TTL level
95 RSTN I Hard reset input. (Reset state: “L”)
96 DVDD3 – Digital power. (3.3V) For logic cell
97 STDA O Operation state monitor data. Common with PWM.
(Output synchronizing with SDCK fall)
98 STCK O Operation state monitor sync signal. (Data top bit: “L”) Common with PWM.
99 UPWM O General-use PWM output. 4mA, 5V-I/F
100 DVSS – Digital power. (0V) For logic cell
11-6
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
• Block Diagram
DQ8-15 DQ0-7
DATA
QUEUE
OUTPUT MULTIPLEXER
ID REGISTER
Register
CSR
Register
ESRs CE#
OE#
CUI
WE#
Data
A-1.0~17
Comparator
Input RP#
Buffer
Y-DECODER Y GATING/SENSING
RY/BY#
ADDRESS
QUEUE
16-KBYTE
16-KBYTE
16-KBYTE
16-KBYTE
WSM
Block 30
Block 31
Program Erase
Block 0
Block 1
LATCHES VPP
X-DECODER Voltage Switch
VCC
ADDRESS GND
COUNTER
11-7
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
PD7/D15
PD6/D14
PD5/D13
PD4/D12
PD3/D11
PD2/D10
PD1/D9
PD0/D8
PE7/D7
PE6/D6
PE5/D5
PE4/D4
PE3/D3
PE2/D2
PE1/D1
PE0/D0
Vcc
Vcc
Vcc
Vcc
Vcc
Vss
Vss
Vss
Vss
Vss
Vss
Vss
Vss
Port D Port E
PA7/A23/IRQ7
MD2 PA6/A22/IRQ6
MD1 PA5/A21/IRQ5
Port A
MD0 PA4/A20/IRQ4
EXTAL
Clock oscillator
PA3/A19
XTAL PA2/A18
STBY PA1/A17
RES H8S/2000 CPU
PA0/A16
WDTOVF
Bass Controller
Internal address bus
PB7/A15
Port B
Interruption PB4/A12
controller DTC PB3/A11
PB2/A10
Port C
PF2/LCAS/WAIT/BFEQO PC4/A4
PF1/BACK PC3/A3
PF0/BREQ PC2/A2
RAM WDT PC1/A1
PG4/CS0 PC0/A0
Port G
PG3/CS1
PG2/CS2
PG1/CS3 SCI P35/SCK1
PG0/CAS P34/SCK0
Port 3
P33/RxD1
P67/CS7/IRQ3 TPU P32/RxD0
P66/CS6/IRQ2 D/A converter
P31/TxD1
P65/IRQ1 P30/TxD0
Port 6
P64/IRQ0
P63/TEND1 PPG A/D converter P50
Port 5
P62/DREQ1 P51
P61/TEND0/CS5 P52
P60/DREQ0/CS4 P53/ADTRG
P15/PO13/TIOCB1/TCLKC
P17/PO15/TIOCB2/TCLKD
Vref
P10/PO8/TIOCA0/DACK0
P11/PO9/TIOCB0/DACK1
P45/AN5
P44/AN4
P43/AN3
P42/AN2
P41/AN1
P40/AN0
P22/PO2/TIOCC3
P23/PO3/TIOCD3
P20/PO0/TIOCA3
P21/PO1/TIOCB3
P24/PO4/TIOCA4
P25/PO5/TIOCB4
P26/PO6/TIOCA5
P27/PO7/TIOCB5
P14/PO12/TIOCA1
P16/PO14/TIOCA2
A4 8
13 I/O1
A5 7
14 I/O2
A6 6 131072 WORDS
DECORDER
15 I/O3
ADDRESS INPUT
X 8 BYS
SENSE AMP.
A7 5
OUTPUT
BUFFER
17 I/O4
BUFFER
(1024 ROWS
4
ROW
BUFFER
A0 12
DECODER
COLUMN
BUFFER
CLOCK
A2 10 GENERATOR
A3 9
A10 23 29 R/W
22 CE1
ADDRESS INPUT
CE2
DECODER
11 30
BUFFER
BLOCK
A1
A11 25 24 OE
A9 26 VDD
32 (5V)
GND
16 (0V)
11-8
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Address Address
Instruction 6bit
buffer Decoder 6bit
D I 1,024
register
bit
Data R/W EEPROM
16bit
resistor Amp. 16bit Aray
D O Dummy bit
12 15 2 7
18 21 10 11 29 28 27 26 30 31
HADAT HADR HCS HAS HWR HRD HIM MRST
8 8 1 1 1 1 1 1
TEST0 62
Clock PXCLKI
51 Timing ITU-R TEST1 63
Gen. 1
PXCLKO generation 601/656
44 1 formatter INT 22
1 1 8 WAIT 23
HSYNCO VSYNCO PXDO
64pin LQFP 46 45 34 39
42 43
NTSC Enc.
(3ch D/A built in)
11-10
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-11
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Pin1~15 ........ There is a possibility of simultaneous change. Operating frequency: Approx. 10 MHz
Pin18~47 ..... There is a possibility of simultaneous change.(Static signal) Operating frequency: Approx. 1 MHz
Pin50~57 ..... There is almost no possibility of simultaneous change. Operating frequency: Approx. 1 MHz
Pin63 ............ Not used
• Block Diagram In/Output Pin
Output:
In/Output Pin Open drain In/Output Pin
SOUT(2)
SOUT(1)
SOUT(0)
Q2(7)
Q2(6)
Q2(5)
Q2(4)
S2(5)
S2(4)
S2(3)
S2(2)
S2(1)
S2(0)
VDD
VSS
VSS
EXPBU(3)
EXPBU(2)
EXPBU(1)
EXPBU(0)
EXPD(2)
EXPD(1)
EXPD(0)
EXPC(5)
EXPC(4)
EXPC(3)
EXPC(2)
EXPC(1)
EXPC(0)
VDD
VSS
VSS
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
In/Output Pin
Data Buffer
SOUT(5) EXPD(5) 52
Latch D Latch C
Latch B
29 EXPBL(1) Q2(1)
BUFDO 53 28 EXPBL(0) Q2(0)
BUFDI 54 27 EXPAU(3) Q1(7)
SBUFBO 55
In/Output Pin
26 EXPAU(2) Q1(6)
SBUFBI 56 25 VDD VDD
Exclusive-use pin
Data Buffer
23 EXPAU(1) Q1(5)
Latch A
MRST MRST 59 22 EXPAU(0) Q1(4)
MODE MODE 60 21 EXPAL(3) Q1(3)
SEL BUFCO 61 20 EXPAL(2) Q1(2)
TEST TEST 62 19
Data Buffer EXPAL(1) Q1(1)
CK BUFCI 63 18 EXPAL(0) Q1(0)
VSS VSS 64 R/W CTL
17 VDD VDD
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
HADR0
HADR1
HADR2
HDAT0
HDAT1
HDAT2
HDAT3
HDAT4
HDAT5
HDAT6
HDAT7
HWR
HRD
VDD
HCS
VSS
S1(0)
S1(1)
S1(2)
S1(3)
S1(4)
S1(5)
VDD
VSS
D(0)
D(1)
D(2)
D(3)
D(4)
D(5)
D(6)
D(7)
11-12
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-13
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-14
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-15
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-16
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
• Block Diagram
I/O Control
LWE
Data Input Register
LDQM
Bank Select
Rown Decorder
Refrsh Counter
Output Buffer
Sense AMP
512K x 16
Row Buffer
DQi
Address Register
CLK 512K x 16
ADD
Column Decoder
LCBR
LRAS
Col. Buffer
LCKE
Programming Resiter
LRAS LCBR LWE LCAS LWCBR LDQM
Timing Register
11-17
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-14. IC702 BA6796FP MOTOR DRIVER
Pin No. Terminal name Operation function Pin No. Terminal name Operation function
1 OPOUT Ope amp. output terminal 15 CH2-OUT- CH2 Negative output terminal
2 CH4-IN CH4 Input terminal 16 CH2-OUT+ CH2 Positive output terminal
3 CH4-IN’ CH4 Gain adjustment input terminal 17 CH1-OUT- CH1 Negative output terminal
4 CTL1 Contorol 1 input terminal 18 CH1-OUT+ CH1 Positive output terminal
5 CTL2 Contorol 2 input terminal 19 CH1-IN CH1 Input terminal
6 FWD Tray forward input terminal 20 CH1-IN’ CH1 Input terminal for gain adjustment
7 REV Tray reverse input terminal 21 VCC VCC
8 TRAY-IN Tray input terminal 22 CH2-IN CH2 Input terminal
9 GND Sub-straight GND 23 CH2-IN’ CH2 Input terminal for gain adjustment
10 CH5-OUT- Tray negative output terminal 24 CH3-IN CH3 Input terminal
11 COM-OUT Tray positive output terminal/CH4 25 CH3-IN’ CH3 Input terminal for gain adjustment
negative output terminal
12 CH4-OUT+ CH4 Positive output terminal 26 VREF-IN Bias amp. input terminal
13 CH3-OUT+ CH3 Positive output terminal 27 OPIN+ Operational amplifier nonreverse input terminal
14 CH3-OUT- CH3 Negative output terminal 28 OPIN- Operational amplifier reverse input terminal
Note 1: Positive and negative output have polarity with respect to input. (An example: 19 pin input ‘H’: 18 pin output ‘H’)
Note 2: Tray positive output and tray negative output have polarity with respect to mode. (An example: 11 pin output
‘H’ in FORWARD mode)
• Block Diagram
CH3-IN CH2-IN CH1-IN CH1-OUT CH2-OUT
28 27 26 25 24 23 22 21 20 19 18 17 16 15
10K
10K VCC
10K D D D D
13.3K
- + 13.3K
13.3K
- Level shift
+ -
Level shift + -
+
Level shift
T.S.D
Level shift
+
-
26.6K
V/I D D D D D
LOGIC
10K
CTL1 CTL2 PWD REV
1 2 3 4 5 6 7 8 9 10 11 12 13 14
CH4-IN CH5-IN CH5-OUTCH4-OUT CH3-OUT
11-18
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
11-19
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Pin No. Terminal name I/O Operation function Remarks
44 TRO O Tracking equalizer output terminal.
45 VREF – Analog reference power terminal.
46 RFGC O RF amplitude adjustment control signal output terminal.
Output of 3-pole PWM signal. (PWM carrier = 88.2 kHz)
47 TEBC O Tracking balance control signal output terminal.
Output of 3-pole PWM signal. (PWM carrier = 88.2 kHz)
48 FMO O Feed equalizer output terminal.
Output of 3-pole PWM signal. (PWM carrier = 88.2 kHz)
49 FVO O Speed error signal or feed search EQ output terminal.
Output of 3-pole PWM signal. (PWM carrier = 88.2 kHz)
50 DMO O Disc equalizer output terminal.
Output of 3-pole PWM signal. (PWM carrier = DSP system
88.2kHz, to be synchronized with PXO)
51 2VREF –
52 SEL O
53 /FOON O
54 /DFCT O
55 /SRCH O
56 /SHC O
57 VDD –
58 VSS –
59 IO0 I/O General use I/O port.
60 IO1 It is possible to select the input port and output port according
to command.
61 IO2 In case of input port the terminal state (H/L) can be read with
the read command.
62 IO3 In case of output port the terminal state (H/L/HiZ) can be
controlled with the command.
63 /DMOUT Terminal to set the mode to output dual value PWM of feed
equalizer from the IO0,1 terminal and to output the dual value
PWM from disc equalizer of IO2,3 terminal “L” Active.
64 /CKSE X’tal selection terminal.
When 16.9344 MHz: “H” When 33.8688 MHz: “L”
65 /DACT Test terminal.
66 TESIN Test input terminal.
67 TESIO1 Test input/output terminal.
68 VSS Digital ground terminal.
69 PXI DSP system clock oscillation circuit input terminal.
70 PXO DSP system clock oscillation circuit output terminal.
71 VDD Digital + power terminal.
72 XVSS Ground terminal for system clock oscillation circuit.
73 XI System clock oscillation circuit input terminal.
74 XO System clock oscillation circuit output terminal.
75 XVDD Positive power terminal for system clock oscillation circuit.
76 DVDD – D/A converting section power terminal.
77 RO O R channel data forward rotation output terminal.
78 DVSS – D/A converting section analog ground terminal.
79 DVR – D/A converting section reference voltage terminal.
80 LO O L channel data forward rotation output terminal.
81 DVDD – D/A converting section power terminal.
82 TEST1 I Test terminal. Pull-up resistor
To be opened usually. built in.
83 TEST2 I Test terminal. Pull-up resistor
To be opened usually. built in.
84 TEST3 I Test terminal. Pull-up resistor
To be opened usually. built in.
85 BUS0 I/O Microcomputer interface data input/output terminal. Schmidt input
86 BUS1 I/O CMOS port
87 BUS2 I/O
11-20
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Pin No. Terminal name I/O Operation function Remarks
88 BUS3 I/O
89 VDD – Digital + power terminal.
90 VSS – Digital ground terminal.
91 BUCK I Microcomputer interface clock input terminal. Schmidt input
92 /CCE I Microcomputer interface chip enable signal input terminal. Schmidt input
BUS0 to 3 is active in “L” state.
93 TEST4 I Test terminal. Pull-up resistor
To be opened usually. built in.
94 /TEMOD I Local test mode selection terminal. Pull-up resistor
built in.
95 /RST I Reset signal input terminal. Pull-up resistor
Reset state: “L” built in.
96 TEST0 I Test terminal. Pull-up resistor
To be opened usually. built in.
97 /HSO O Playback speed mode flag output terminal.
98 /UHSO O
/UHSO /HSO Playback speed
H H x1 speed playback
H L x2 speed playback
L H x4 speed playback
L L x8 speed playback
• Block Diagram
/DMOUT
TESIO1
2VREF
/FOON
/SRCH
/DACT
/CKSE
TESIN
/DFCT
XVDD
XVSS
/SHC
VDD
PXO
VDD
VSS
VSS
SEL
PXI
IO3
IO2
IO1
IO0
XO
XI
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
DVDD 76 50 DMO
RO 77 49 FVO
DVSS 78 PWM 48 FMO
DVR 79 LPF 1Bit 47 TEBC
LO 80 DAC Clock Servo control 46 RFGC
DVDD 81 genelator 45 VREF
TEST1 82 D/A 44 TRO
TEST2 83 43 FOO
TEST3 84 + 42 TEZI
Digital –
BUS0 85 ROM 41 TEIN
equalizer
BUS1 86 Micon
Address circuit 40 TSIN
inter Automatic A/D
BUS2 87 RAM 39 SBAD
face adjusting circuit
BUS3 88 + 38 FEIN
–
VDD 89 37 RFRP
VSS 90 CLV servo 36 RFZI
+
–
BUCK 91 1Gk RAM 35 RFCT
Correction
/CCE 92 Sync signal 34 AVDD
circuit
TEST4 93 protection 33 RFIN
Data slicer
EFM
/TEMOD 94 32 SLCO
demodulation PWM
/RST 95 31 AVSS
TEST0 96 30 VCOF
Digital out VCO
/HSO 97 Subcode 29 VCOREF
Audio output demodulation
/UHSO 98 circuit 28 PVREF
circuit
EMPH 99 +
PLL TMAX – 27 LPFO
Status
LRCX 100 26 LPFN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
SPDO
PDO
VSS
BCK
AOUT
DOUT
MBOB
IPF
SBOK
VDD
VSS
SBSY
SPCK
SPDA
COFS
MONIT
VDD
TESIO0
P2VREF
PDOS
XMAXS
TMAX
CLCK
DATA
SFSY
11-21
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Note: (1) Pins 22, 24, 25, 26, 27, and 28: With Schmidt trigger input pull-up resistor (2) Pin 23: With Schmidt trigger input pull-down resistor
(3) Pins 1, 2, and 3: Schmidt trigger input
• Block Diagram
AGND2R
AGND2L
VCC2R
VCC2L
20 19 9 10
3
BCKI 16
Sirial Low-pass VOUTL
1 DAC
LRCIN Input Multilevel filter
I/F 8-time oversampling 18
DIN 2 delta/sigma EXTL
digital filter with
modulator Low-pass 13
VOUTR
function controller DAC filter
28
ML/IIS 11
27 EXTR
MC/DM1
26 Mode 21
MD/DM0 ZERO
23
CS/IWO Control
24
MODE I/F BPZ-Cont.
25 Open Drain
MUTE
22
RSTB
Crystal OSC Power
5 6 4 15 14 8 7
XTI XTO CLKO VCC1AGND1 VDD DGND
11-22
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
• Block Diagram
SD O
NC S
VD D
SC K
VP P
VS S
S C1
S C2
SD I
SB(8)
Timing generating
circuit
Comannding
LATCH(8) Decoder
(8X32)X2 5X12
Shift Resistor
4 4 4 4 4 4 4
8 8 5
MPL MPL MPL
4 4 4
FLP KEY
MATRIX
11-23
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
12. WIRING DIAGRAM
12-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
13. BLOCK DIAGRAMS
13-1. MAIN BLOCK DIAGRAM
13-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
13-2
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
13-3
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
13-4
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
14. SCHEMATIC DIAGRAMS 14-1. MAIN (1) CIRCUIT SCHEMATIC DIAGRAM
1 3
2 4
LOCATION MAP: (1/4)
M
Q
O
R
N
S
K
L
14-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (2/4)
10
1
G
H
C
E
A
F
J
14-2
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (3/4)
M
Q
O
R
N
S
K
L
14-3
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (4/4)
19
18
17
16
15
14
13
12
11
10
G
H
C
E
A
F
J
14-4
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (1/4)
M
Q
O
R
N
S
K
L
14-5
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (2/4)
10
1
G
H
C
E
A
F
J
14-6
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (3/4)
M
Q
O
R
N
S
K
L
14-7
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 3
2 4
LOCATION MAP: (4/4)
19
18
17
16
15
14
13
12
11
10
G
H
C
E
A
F
J
14-8
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 2 3 4 5 6 7 8 9 10
14-9
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
å AND SHADED COMPONENTS=SAFETY RELATED PARTS
10 11 12 13 14 15 16 17 18 19
14-10
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
1 2 3 4 5 6 7 8 9 10
14-11
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
10 11 12 13 14 15 16 17 18 19
14-12
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
15. PRINTED WIRING BOARD ASSEMBLIES 15-1. MAIN P.W.B.
Componet Side
J
1 2 3 4 5 6 7 8 9 10
15-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
10 11 12 13 14 15 16 17 18 19
15-2
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
J Wiring Side
1 2 3 4 5 6 7 8 9 10
15-3
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
10 11 12 13 14 15 16 17 18 19
15-4
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
OPERATE
1 2 3 4 5 6 7 8 9 10
15-5
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
VOLUME
10 11 12 13 14 15 16 17 18 19
15-6
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
DISPLAY
J
1 2 3 4 5 6 7 8 9 10
15-7
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
21-PIN EURO-SCART
10 11 12 13 14 15 16 17 18 19
15-8
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
16. SEMICONDUCTOR LEAD IDENTIFICATION
IC301
RH-iX1461GEZZ IC702
IC707
VHiBA6796FP-1
RH-iX1473GEZZ
IC801 1
VHiPCM1716E-1
IC201 X601
VHiMC44724A-1 RCRSC0031GEZZ
IC2302
X702
VHiNJM2286M-1 1 RCRSC0035GEZZ
IC303
RH-iX1517GEZZ IC2006 IC2005
IC401 IC704
RH-iX1484GEZZ RH-iX1531CEZZ
1
1
IC2002 IC2003
IC402 VHiNJM2268M-1
IC501
RH-iX1474GEZZ IC2303 IC2304
RH-iX1539GEZZ
VHiNJM2267M-1
1
IC2102
VHiTC4W53F/-1
IC703
VHi10324AFV-1 IC504
RH-iX1478GEZZ
IC6001 IC6602
1 VHiNJM4560M-1
IC508
IC506
RH-iX1618GEZZ RH-iX1516GEZZ
IC512
RH-iX1535GEZZ IC5001
1 VHiMN12510F-1
IC507 1
VHiBR93L46F-1
SHARP
IC601 IC9001
RH-iX1521GEZZ VHiT78DL09S-1
IC9002
VHiBA17808T-1
IC509
VHiPST600iM-1
IC9003
VHiPQ30RV211E
IC602
RH-iX0750TAZZ
16-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
17. REPLACEMENT
Ref. No. Part No. ★ PARTS
DescriptionLIST/Code Ref. No. Part No. ★ Description Code
67
17-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
68
17-2
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
69
17-3
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
17-4
70
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
DUNTK5766TE6A(DV-600S) DUNTK5667TEV3(DV-600S)
DUNTK5766TE6B(DV-600H) DUNTK5667TEV4(DV-600H)
MAIN PWB UNIT(Continued) TERMINAL PWB UNIT
R884 VRS-CY1JF100J 10 1/16W Metal Oxide AA
INTEGRATED CIRCUITS
R885 VRS-CY1JF100J 10 1/16W Metal Oxide AA
IC2002 VHiNJM2268M-1 NJM2268M, S YC Driver AF
R886 VRS-CY1JF100J 10 1/16W Metal Oxide AA
IC2003 VHiNJM2268M-1 NJM2268M, Cb/V Drive AF
R887 VRS-CY1JF100J 10 1/16W Metal Oxide AA
IC2006 RH-iX1531CEZZ IX1531CE, Signal SW AF
R891 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
IC2102 VHiTC4W53F/-1 TC4W53F AE
R892 VRS-CY1JF152J 1.5k 1/16W Metal Oxide AA
IC6001 VHiNJM4560M-1 NJM4560M, Audio Amp AG
R893 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
IC9001 VHiT78DL09S-1 T78DL09S AG
R894 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
IC9002 VHiBA17808T-1 BA17808T-1 AE
R895 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
IC9003 VHiPQ30RV211E PQ30RV21 AK
R897 VRS-CY1JF824J 820k 1/16W Metal Oxide AA
R898 VRS-CY1JF824J 820k 1/16W Metal Oxide AA
R7003 VRS-CY1JF103J 10k 1/16W Metal Oxide AA TRANSISTORS
R7004 VRS-CY1JF103J 10k 1/16W Metal Oxide AA Q2003 VSUN2113///-1 UN2113 AA
R7005 VRS-CY1JF103J 10k 1/16W Metal Oxide AA Q2101 VS2SC2412KQ-1 2SC2412KQ AA
R7007 VRS-CY1JF102J 1k 1/16W Metal Oxide AA Q2309 VSUN2212///-1 UN2212 AA
R7042 VRS-CY1JF103J 10k 1/16W Metal Oxide AA Q2310 VS2SC2412KQ-1 2SC2412KQ AA
R7701 VRS-CY1JF224J 220k 1/16W Metal Oxide AA Q2311 VSUN2111///-1 UN2111 AA
R7702 VRS-CY1JF224J 220k 1/16W Metal Oxide AA Q2312 VSUN2213///-1 UN2213 AA
R7703 VRS-CY1JF103J 10k 1/16W Metal Oxide AA Q6001 VS2SD1306-E1E 2SD1306-E AD
R7704 VRS-CY1JF000J 0 1/16W Metal Oxide AA Q6002 VS2SD1306-E1E 2SD1306-E AD
R7705 VRS-CY1JF000J 0 1/16W Metal Oxide AA Q6007 VSUN2111///-1 UN2111 AA
R7706 VRS-CY1JF000J 0 1/16W Metal Oxide AA Q6008 VSUN2111///-1 UN2111 AA
R7712 VRS-CY1JF222J 2.2k 1/16W Metal Oxide AA Q9001 VS2SA1271-Y-1 2SA1271 AB
R7714 VRS-CY1JF103J 10k 1/16W Metal Oxide AA Q9005 VS2SC2412KQ-1 2SC2412KQ AA
R7715 VRS-CY1JF103J 10k 1/16W Metal Oxide AA Q9006 VS2SA1037KQ-1 2SA1037KQ AA
R7716 VRS-CY1JF473J 47k 1/16W Metal Oxide AA å Q9007 VS2SC4300//-1 2SC4300 AM
R7717 VRS-CY1JF562J 5.6k 1/16W Metal Oxide AA Q9009 VS2SC2412KQ-1 2SC2412KQ AA
R7718 VRS-CY1JF103J 10k 1/16W Metal Oxide AA å Q9010 VS2SD2144S/-1 2SD2144S AC
R7719 VRS-CY1JF103J 10k 1/16W Metal Oxide AA
R7720 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA DIODES
R7721 VRS-CY1JF101J 100 1/16W Metal Oxide AA D2002 VHDDAN202K/-1 DAN202K AB
R7722 VRS-CY1JF103F 10k 1/16W Metal Oxide AA D2003 VHDDAP202K/-1 DAP202K AB
R7723 VRS-CY1JF563F 56k 1/16W Metal Oxide AA D2004 VHDDAN202K/-1 DAN202K AB
R7724 VRS-CY1JF223J 22k 1/16W Metal Oxide AA D2005 VHDDAP202K/-1 DAP202K AB
R7728 VRS-CY1JF000J 0 1/16W Metal Oxide AA D2101 RH-EX0609GEZZ Zener, EX0609GE AA
R7729 VRS-CY1JF000J 0 1/16W Metal Oxide AA D2303 VHDRB441Q40-1 RB441Q40 AC
R7730 VRS-CY1JF000J 0 1/16W Metal Oxide AA D2304 VHDDAN202K/-1 DAN202K AB
R7732 VRS-CY1JF000J 0 1/16W Metal Oxide AA D6001 VHD1SS119//-1 1SS119 AB
D6002 VHD1SS119//-1 1SS119 AB
MISCELLANEOUS PARTS D9005 VHD15DF1FC/1E 15DF1FC AD
CN201 QPLGN1264TAZZ Plug, 12Pin AE D9006 VHD1SS244//-1 1SS244 AB
CN301 QSOCN2086TAZZ Socket, 20Pin AD D9007 VHD31DQ04FC1E 31DQ04FC AC
CN702 QSOCN1136TAZZ Socket, 11Pin AD D9008 VHD1SS244//-1 1SS244 AB
CN801 QSOCN2936TAZZ Socket, 29Pin AF D9009 VHD1SS119//-1 1SS119 AB
CN802 QSOCN1436TAZZ Socket, 14Pin AE D9010 VHD1SS119//-1 1SS119 AB
CN803 QSOCN1536TAZZ Socket, 15Pin AE D9011 RH-EX0619GEZZ Zener, EX0619GE AA
FB201 RBLN-0052TAZZ Balun, BLN-0052TA AC å D9012 RH-DX0220CEZZ DX0220CE AB
FB301 RBLN-0052TAZZ Balun, BLN-0052TA AC å D9013 RH-DX0321CEZZ DX0321CE AC
FB501 RBLN-0052TAZZ Balun, BLN-0052TA AC D9014 RH-EX0613GEZZ Zener, EX0613GE AA
FB601 RBLN-0052TAZZ Balun, BLN-0052TA AC å D9015 VHDERA1802/-1 ERA1802 AB
FB603 RBLN-0052TAZZ Balun, BLN-0052TA AC å D9016 RH-DX0083GEZZ DX0083GE AC
FB801 RBLN-0056TAZZ Balun, BLN-0056TA AC å D9020 RH-FX0007GEZZ FX0007GE AD
FB802 RBLN-0056TAZZ Balun, BLN-0056TA AC å D9021 RH-EX0001AEZZ Zener, EX0001AE AC
FB803 RBLN-0056TAZZ Balun, BLN-0056TA AC å D9022 VHDERA1802/-1 ERA1802 AB
FB804 RBLN-0056TAZZ Balun, BLN-0056TA AC å D9023 RH-EX0601GEZZ Zener, EX0601GE AA
FB805 RBLN-0056TAZZ Balun, BLN-0056TA AC å D9024 VHD1SS119//-1 1SS119 AB
FB806 RBLN-0056TAZZ Balun, BLN-0056TA AC D9025 RH-EX0807GEZZ Zener, EX0807GE AC
FB815 RBLN-0056TAZZ Balun, BLN-0056TA AC P2101 VHPGP1F32T/-1 PhotoDiode AK
FB816 RBLN-0056TAZZ Balun, BLN-0056TA AC
FB817 RBLN-0056TAZZ Balun, BLN-0056TA AC FILTER
FB818 RBLN-0056TAZZ Balun, BLN-0056TA AC FL2101 RFiLN0044GEZZ Filter, FiLN0044GE AB
FB819 RBLN-0056TAZZ Balun, BLN-0056TA AC
FB820 RBLN-0056TAZZ Balun, BLN-0056TA AC COILS AND TRANSFORMER
FB821 RBLN-0056TAZZ Balun, BLN-0056TA AC L2001 VP-MK100K0000 Peaking, 10µH AB
FB825 RBLN-0056TAZZ Balun, BLN-0056TA AC L6003 VP-XF3R3K0000 Peaking, 3.3µH AB
TP330 QPLGN0864TAZZ Plug, 8Pin AD L6004 VP-XF3R3K0000 Peaking, 3.3µH AB
L9001 RCiLP0232CEZZ Coil, CiLP0232CE AD
L9002 RCiLP0232CEZZ Coil, CiLP0232CE AD
å L9003 RCiLF0277GEZZ Coil, CiLF0277GE AG
å T9001 RTRNZ0079GEZZ Transformer AN
71
17-5
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
72
17-6
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
DUNTK5667TEV3(DV-600S) RESISTORS
DUNTK5667TEV4(DV-600H) JP6601 VRS-CY1JF000J 0 1/16W Metal Oxide AA
TERMINAL PWB UNIT(Continued) R5001 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
R5009 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
MISCELLANEOUS PARTS R5010 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
å AC9001 QSOCA0222GEZZ Socket, 2Pin AE R5011 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
CN2001 QSOCN1599REZZ Socket, 15Pin AD R5012 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
CN2301 QPLGN1278GEZZ Plug, 12Pin AC R5013 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
CN2302 QPLGN1078GEZZ Plug, 10Pin AC R5014 VRS-CY1JF222J 2.2k 1/16W Metal Oxide AA
CN6001 QSOCN2999REZZ Socket, 29Pin AE R5015 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
CN6002 QPLGN0678GEZZ Plug, 6Pin AB R5016 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
CN9001 QPLGN1250CEZZ Plug, 12Pin AE R5017 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
å FH9001 QFSHD1013CEZZ Fuse Holder AC R5018 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
å FH9002 QFSHD1014CEZZ Fuse Holder AC R5019 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
å F9001 QFS-C2025CEZZ Fuse, 2A 250V AD R5020 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
J2001 QTANJ9118GEZZ Terminal AL R5021 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
J2002 QSOCD0417GEZZ Socket AG R5022 VRS-CY1JF333J 33k 1/16W Metal Oxide AA
S2301 QSW-S0202CEZZ Switch AF R5023 VRS-CY1JF103J 10k 1/16W Metal Oxide AA
å S9001 QSW-P0591CEZZ Switch AQ R5024 VRS-CY1JF103J 10k 1/16W Metal Oxide AA
W9001 PRDAF3014AJFW Heat Sink AE R6670 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
å W9002 PRDAF3028GEFW Heat Sink AF R6671 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
R6672 VRS-CY1JF151J 150 1/16W Metal Oxide AA
R6673 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
R6674 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
DUNTK5668TEV3(DV-600S) R6675 VRS-CY1JF151J 150 1/16W Metal Oxide AA
R6676 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
DUNTK5668TEV4(DV-600H) R6677 VRS-CY1JF102J 1k 1/16W Metal Oxide AA
DISPLAY PWB UNIT R6678 VRS-CY1JF103J 10k 1/16W Metal Oxide AA
R6679 VRS-CY1JF103J 10k 1/16W Metal Oxide AA
INTEGRATED CIRCUITS
IC5001 VHiMN12510F-1 MN12510F, FL Driver AM MISCELLANEOUS PARTS
IC6602 VHiNJM4560M-1 NJM4560M, H/A Amp AG CN5001 QSOCN1499REZZ Socket, 14Pin AD
CN5002 QSOCN0895REZZ Socket, 8Pin AC
TRANSISTORS CN6601 QSOCN0895REZZ Socket, 8Pin AC
Q5001 VSUN2211///-1 UN2211 AA CN6602 QPLGN0678GEZZ Plug, 6Pin AB
Q5002 VSUN2211///-1 UN2211 AA J6603 QJAKE0231GEZZ Jack, Head Phone AG
Q5004 VS2SA1037KQ-1 2SA1037KQ AA
Q5005 VSUN2212///-1 UN2212 AA
Q6605 VS2SD1306-E1E 2SD1306-E AD
Q6606 VS2SD1306-E1E 2SD1306-E AD DUNTK5669TEV3(DV-600S)
DUNTK5669TEV4(DV-600H)
DIODES
DG5001 VVK20U56102-1 Display AV OPERATE PWB UNIT
D5001 RH-EX0721GEZZ Zener, EX0721GE AA
D5002 VHD1SS119//-1 1SS119 AB DIODES
D5003 VHD1SS119//-1 1SS119 AB D8101 RH-PX0284GEZZ LED, S-Picture AC
D5004 VHD1SS119//-1 1SS119 AB D8102 RH-PX0284GEZZ LED, Ganma AC
D5005 VHD1SS119//-1 1SS119 AB
D5006 VHD1SS119//-1 1SS119 AB RESISTORS
D5007 VHD1SS119//-1 1SS119 AB R8101 VRD-RA2EE331J 330 1/4W Carbon AA
R8102 VRD-RA2EE331J 330 1/4W Carbon AA
FILTER R8103 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA
FL5001 RFiLC0091GEZZ Filter, 4MHz AD R8105 VRS-CY1JF222J 2.2k 1/16W Metal Oxide AA
R8107 VRD-RA2BE122J 1.2k 1/8W Carbon AA
CAPACITORS R8108 VRD-RA2BE821J 820 1/8W Carbon AA
C5001 VCKYCY1CF104Z 0.1 16V Ceramic AA R8109 VRS-CY1JF681J 680 1/16W Metal Oxide AA
C5002 VCKYCY1HF473Z 0.047 50V Ceramic AA R8110 VRS-CY1JF471J 470 1/16W Metal Oxide AA
C5005 VCKYCY1HF103Z 0.01 50V Ceramic AA
C5006 VCEAEM1CW106M 10 16V Electrolytic AB MISCELLANEOUS PARTS
C5007 VCKYCY1HF103Z 0.01 50V Ceramic AA CN8102 QSOCN0896REZZ Socket, 8Pin AC
C5008 VCCCCY1HH330J 33p 50V Ceramic AA S8101 QSW-K0079GEZZ Switch, Open/Close AB
C5009 VCCCCY1HH330J 33p 50V Ceramic AA S8103 QSW-K0079GEZZ Switch, Still/Pause AB
C5010 VCCCCY1HH330J 33p 50V Ceramic AA S8108 QSW-K0079GEZZ Switch, Step AB
C5011 VCKYD41HF473Z 0.047 50V Ceramic AA S8109 QSW-K0079GEZZ Switch, Play AB
C5012 VCCCCY1HH101J 100p 50V Ceramic AA S8110 QSW-Z0082GEZZ Switch, Jog AG
C6626 VCEAEM1CW106M 10 16V Electrolytic AB
C6627 VCEAEM0JW476M 47 6.3V Electrolytic AB
C6628 VCEAEM0JW476M 47 6.3V Electrolytic AB
C6629 VCKYCY1HF103Z 0.01 50V Ceramic AA DUNTK5670TEV3(DV-600S)
C6630 VCEAEM1CW106M 10 16V Electrolytic AB DUNTK5670TEV4(DV-600H)
C6631 VCEAEM0JW107M 100 6.3V Electrolytic AB VOLUME PWB UNIT
C6632 VCEAEM1CW106M 10 16V Electrolytic AB
C6633 VCCCCY1HH101J 100p 50V Ceramic AA
C6634 VCCCCY1HH101J 100p 50V Ceramic AA CONTROL
R6661 RVR-A4014GEZZ 5k(A), Head Phone Volume AF
73
17-7
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
DIODES
D2201 RH-EX0646GEZZ Zener, EX0646GE AA
D2202 RH-EX0646GEZZ Zener, EX0646GE AA
OTHER PARTS
D2301 VHDDAN202K/-1 DAN202K AB
D2302 VHDDAP202K/-1 DAP202K AB QCNW-7884AJZZ Connecting Cord, 14 Pin AF
CN5001-CN802
COILS QCNW-8035AJZZ Connecting Cord, 29 pin AF
L2203 VP-XF3R3K0000 Peaking, 3.3µH AB CN801-CN6001
L2204 VP-XF3R3K0000 Peaking, 3.3µH AB QCNW-8036AJZZ Connecting Cord, 15 Pin AE
L2301 VP-MK100K0000 Peaking, 10µH AB CN803-CN2001
QCNW-8037AJZZ Connecting Cord, 8 Pin AD
CAPACITORS CN5002-CN8102,
C2203 VCKYCY1HB102K 1000p 50V Ceramic AA CN6601-CN6661
C2302 VCKYCY1CB104K 0.1 16V Ceramic AB QCNW-8083AJZZ Connecting Cord, 12 Pin AH
C2303 VCEAEM1AW476M 47 10V Electrolytic AB CN201-CN9001
C2304 VCEAEM1AW476M 47 10V Electrolytic AB QCNW-8040AJZZ Connecting Cord, 12 Pin AG
C2305 VCKYCY1HB103K 0.01 50V Ceramic AA CN2301-CN2303
C2306 VCEAEM1AW476M 47 10V Electrolytic AB QCNW-8041AJZZ Connecting Cord, 10 Pin AG
C2307 VCEAEM1HW225M 2.2 50V Electrolytic AB CN2302-CN2304
C2308 VCEAEM1HW225M 2.2 50V Electrolytic AB QCNW-8047AJZZ Connecting Cord, 6 Pin AF
C2309 VCEAEM1HW225M 2.2 50V Electrolytic AB CN6602-CN6002
C2310 VCEAEM1HW225M 2.2 50V Electrolytic AB
C2311 VCEAEM1CW226M 22 16V Electrolytic AB
C2312 VCEAEM1HW475M 4.7 50V Electrolytic AB
C2313 VCEAEM1HW475M 4.7 50V Electrolytic AB
C2314 VCEA2A0JW477M 470 6.3V Electrolytic AB
C2315 VCQYTA1HM104J 0.1 50V Mylar AA
C2316 VCEAEM1HW475M 4.7 50V Electrolytic AB
C2317 VCEAEM0JW107M 100 6.3V Electrolytic AB
RESISTORS
R2205 VRS-CY1JF101J 100 1/16W Metal Oxide AA
R2206 VRS-CY1JF101J 100 1/16W Metal Oxide AA
R2207 VRD-RM2HD331J 330 1/2W Carbon AA
R2208 VRD-RM2HD750J 75 1/2W Carbon AA
R2301 VRS-CY1JF000J 0 1/16W Metal Oxide AA
R2303 VRS-CY1JF750J 75 1/16W Metal Oxide AA
R2304 VRS-CY1JF471J 470 1/16W Metal Oxide AA
R2305 VRS-CY1JF750J 75 1/16W Metal Oxide AA
R2306 VRS-CY1JF121J 120 1/16W Metal Oxide AA
R2307 VRS-CY1JF682J 6.8k 1/16W Metal Oxide AA
17-8
74
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
17-9
75
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
MECHANISM EXPLODED VIEW
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
37 Dry Coading
H
A
17
18 B
16
G 52
Dry Coading
1 45 Grease
20 33
D
Oil
F
Grease
1-9
1-4
30
1-10
53
E
30 Grease
1-5 1-11
1-3
1-2 15
14 1-12 D
41 1-13 29
1-2 1-1
D 1-7
1-8
1-3 1-6
å Caution
1-6 Grease When touching the pickup,
C
43 37 • wear an earth band to p
revent breakage by static
electricity.
31 B
32
F E 24
G 44
B
25
44
26
45
23 27
A C
C
Grease
G
A Grease 21 F
22 Grease
28 E
1 2 3 4 5 6
76
17-10
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
CABINET EXPLODED VIEW
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
601 629
630
B
H 629 E
G 607 a
633 D
f
a 629
a
628 C
628 625 d
h
c
F
614 b
610 a 604
e
j 606
605 i 624
D
616
609
620
618
621 618 d
h j 631
f
628 c
C
g b 617
e
632
i 613
a
611
626
622
B
622
612
a
615
A
619 617
1 2 3 4 5 6
77
17-11
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
FRONT Part
Ref. No.
PANELNo.
PARTS
★
EXPLODED VIEW
Description Code Ref. No. Part No. ★ Description Code
501
501-12
501-11
501-4 501-7
F
501-2
501-2-1
501-3 501-13
E 501-11
501-5
D
501-6
C
501-10
501-9
501-8
1 2 3 4 5 6
78
17-12
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600H
18.
Ref. PACKING
No. OF THE
Part No. ★ SET
Description Code Ref. No. Part No. ★ Description Code
å
★ SPAKP0155AJZZ
(Polystylene Sack) QACCB0016TAZZ (DV-600H)
(AC Cord)
RRMCG1160GESA
(Remote Control Unit)
★ SPAKX1006AJZZ
(Packing Add.)
÷ : PS
★ SSAKA0160CEZZ
(Polyethylene Bag,
Accessories)
÷ : PS
å
QACCK0002TAZZ
(DV-600S)
(AC Cord)
QCNW-7581GEZZ
(Video/Audio Cable)
TiNS-3614AJZZ (DV-600S)
TiNS-3613AJZZ (DV-600H)
(Operation Manual)
★ SPAKL0030GEZZ
(Handle)
★ SPAKC4110AJZZ (DV-600S)
★ SPAKC4109AJZZ (DV-600H)
(Packing Case)
79
18-1
Downloaded from www.Manualslib.com manuals search engine
DV-600S
DV-600S
DV-600H
DV-600H
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
SHARP CORPORATION
TQ0647-S
AV Systems Group
May. 1999 Printed in JAPAN
Quality & Reliability Control Center
SA. NS
Yaita, Tochigi 329-2193, Japan
80
Downloaded from www.Manualslib.com manuals search engine