website:http://biz.LGservice.

com
e-mail:http://www.LGEservice.com/techsup.html

COLOR TV
SERVICE MANUAL
CHASSIS : MC-049A

MODEL:CT-29M65VE

CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

Downloaded from www.Manualslib.com manuals search engine

 CONTENTS

Contents ...................................................................................................................2

Safety Precautions..............................................................................................3

Control Descriptions..........................................................................................4

Specifications........................................................................................................6

Adjustment Instructions..................................................................................7

Trouble Shooting .................................................................................................11

Printed circuit board.........................................................................................15

Block Diagram ......................................................................................................17

Exploded View....................................................................................................20

Exploded View Parts List ..............................................................................21

Replacement Parts List .................................................................................22

SVC. Sheet..................................................................................................................

-2 -

Downloaded from www.Manualslib.com manuals search engine

 SAFETY PRECAUTIONS

IMPORTANT SAFETY NOTICE

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in
the Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to
prevent X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

General Guidance Before returning the receiver to the customer,

An isolation Transformer should always be used during always perform an AC leakage current check on the exposed
the servicing of a receiver whose chassis is not isolated from metallic parts of the cabinet, such as antennas, terminals, etc.,
the AC power line. Use a transformer of adequate power rating to be sure the set is safe to operate without damage of
as this protects the technician from accidents resulting in electrical shock.
personal injury from electrical shocks.
Leakage Current Cold Check(Antenna Cold Check)
It will also protect the receiver and it's components from being With the instrument AC plug removed from AC source,
damaged by accidental shorts of the circuitry that may be connect an electrical jumper across the two AC plug prongs.
inadvertently introduced during the service operation. Place the AC switch in the on position, connect one lead of
ohm-meter to the AC plug prongs tied together and touch other
If any fuse (or Fusible Resistor) in this TV receiver is blown, ohm-meter lead in turn to each exposed metallic parts such as
replace it with the specified. antenna terminals, phone jacks, etc.
If the exposed metallic part has a return path to the chassis, the
When replacing a high wattage resistor (Oxide Metal Film measured resistance should be between 1MΩ and 5.2MΩ.
Resistor, over 1W), keep the resistor 10mm away from PCB. When the exposed metal has no return path to the chassis the
reading must be infinite.
Keep wires away from high voltage or high temperature parts. An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube. Leakage Current Hot Check (See below Figure)
Do not lift the Picture tube by it's Neck. Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
X-RAY Radiation Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
Warning: and the exposed metallic parts.
Measure the AC voltage across the resistor using AC
The source of X-RAY RADIATION in this TV receiver is the voltmeter with 1000 ohms/volt or more sensitivity.
High Voltage Section and the Picture Tube. Reverse plug the AC cord into the AC outlet and repeat AC
For continued X-RAY RADIATION protection, the voltage measurements for each exposed metallic part. Any
replacement tube must be the same type tube as specified in voltage measured must not exceed 0.75 volt RMS which is
the Replacement Parts List. corresponds to 0.5mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
To determine the presence of high voltage, use an accurate
high impedance HV meter. Leakage Current Hot Check circuit

Adjust brightness, color, contrast controls to minimum. AC Volt-meter

Measure the high voltage.
The meter reading should indicate
23.5 ¡ 1.5KV: 14-19 inch, 26 ¡ 1.5KV: 19-21 inch,
29.0 ¡ 1.5KV: 25-29 inch, 30.0 ¡ 1.5KV: 32 inch
If the meter indication is out of tolerance, immediate service Good Earth Ground
such as WATER PIPE,
and correction is required to prevent the possibility of CONDUIT etc.
premature component failure. To Instrument's
0.15uF
exposed
METALLIC PARTS

1.5 Kohm/10W

-3 -

Downloaded from www.Manualslib.com manuals search engine

 DESCRIPTION OF CONTROLS

All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
POWER MUTE
Remote control handset
1 11
1 2 3 Before you use the remote control handset, please install the bat-
teries. See the next page.
4 5 6
2 1. POWER
7 8 9
switches the set on from standby or off to standby.
ARC 0 TV/AV
3 12 2. NUMBER BUTTONS
SOUND PICTURE MENU switches the set on from standby or directly select a number.
4 13
OK
3. ARC (Aspect Ratio Control)
T U R B O
14 changes the picture format.

VOL
PR
VOL
4. TURBO PICTURE / SOUND BUTTON
5 selects Turbo picture / sound.
PR

REW PLAY FF 5. D / E (Programme Up/Down)

selects a programme or a menu item.
6 P/STILL STOP REC switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
7 I/II SSM LIST adjusts menu settings.
8 15
PSM SLEEP EYE/
16 6. VCR BUTTONS (option)
9 control a LG video cassette recorder.
PIP FAVOURITE Q.VIEW 17
18
19 7. SSM (Sound Status Memory)
TEXT

recalls your preferred sound setting.

10 MIX TIME REVEAL ? MODE M

SIZE STILL POSITION 9/4 PIP i

8. I/II (option)
selects the language during dual language broadcast (option).
PR PR SWAP INPUT 20 selects the sound output.

9. PSM (Picture Status Memory)

recalls your preferred picture setting.

(With TELETEXT / PIP) 10. TELETEXT BUTTONS (option)

These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
FAVOURITE Q.VIEW 11. MUTE
TEXT
switches the sound on or off.
10
MIX TIME REVEAL ? MODE M
12. TV/AV
selects TV or AV mode.
SIZE HOLD UPDATE INDEX i switches the set on from standby.
13. MENU
selects a menu.

14. OK
(With TELETEXT / Without PIP) accepts your selection or displays the current mode.

-4 -

Downloaded from www.Manualslib.com manuals search engine

 15. LIST
displays the programme table.
16. EYE/ (option)
*
switches the eye function on or off. POWER MUTE

1 11
17. SLEEP 1 2 3
sets the sleep timer.
4 5 6
18. Q.VIEW 2
returns to the previously viewed programme. 7 8 9

19. FAVOURITE ARC 0 TV/AV

selects a favorite programme. 3 12

SOUND PICTURE MENU

20. PIP BUTTONS (option) 4 13

T U R B O OK
PIP
switches the sub picture on or off. 14
PR
PR +/- VOL VOL
selects a programme for the sub picture. 5
PR
SWAP
REW PLAY FF
alternates between main and sub picture.
INPUT 6 P/STILL STOP REC
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size. 7 I/II SSM LIST
STILL 8 15
PSM SLEEP
freezes motion of the sub picture. EYE/
16
POSITION 9
FAVOURITE Q.VIEW 17
relocates the sub picture in clockwise direction. 18
9/4 PIP 19
switches on or off the programme scan mode through 4 or 9
sub pictures.

COLOURED BUTTONS
These buttons are used for teletext (only TELETEXT models) or
programme edit.

(Without TELETEXT / PIP)

EYE/

PIP FAVOURITE Q.VIEW

SIZE STILL POSITION 9/4 PIP

PR PR SWAP INPUT 20

(Without TELETEXT / With PIP)

-5 -

Downloaded from www.Manualslib.com manuals search engine

 SPECIFICATIONS
Note : Specification and others are subject to change without notice for improvement.

F Scope F Test Condition

This specification can be applied to all the television related to 1) Temperature :20 ± 5°C(CST : 40 ± 5°C)
MC-049A Chassis. 2) Relative Humidity:65 ± 10%
3) Use the parts only designated in B.O.M.,PARTS SPEC.,or
Chassis Market Brand Standard input Voltage drawings.
4) Follow each drawing or spec for spec and performance of
MC049A Middle East, Africa LG 110-240Vac, 50/60Hz parts,based upon P/N of B.O.M
EU 230Vac, 50/60Hz 5) Warm up TV set for more than 20min. before the
measurement.

F Test and Inspection Method

1) performance:Follow the Standard of LG TV test
2) Standards of Etc. requirement
- Safety: IEC60065
- EMC: EN55020,EN55013

F General Specification
No Item Specification Remark
1 Receiving System PAL,SECAM BG For EU/ For Non EU
PAL/SECAM DK
PAL-I/I
NTSC M
NTSC 4.43(AV)
SECAM-L/L’ OPTION
NTSC M/ PAL M/N
2 Available Channel VHF : E2 ~ E12
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21 ~ S41
3 Input Voltage AC 110-240V, 50/60Hz Non EU
AC 230V 50/60Hz EU
4 Market EU,CIS, China, Asia, Africa
5 Screen Size Flat 25”, 29”, 28”, 32”
NOR 25”, 27”, 28”, 29”
6 Tuning System FVS 100Program 200 PR. (W/O TXT)
7 Operating Environment 1) Temp : 0 ~ 45 deg
2) Humidity: 85% under
8 Storage Environment 1) Temp : -20 ~ 60 deg
2) Humidity: 85% under

-6 -

Downloaded from www.Manualslib.com manuals search engine

 ADJUSTMENT INSTRUCTIONS
1. Application Object 4. Purity & Convergence adjustment
These instructions are applied to all of the color TV, MC-049A.
CPT Assembling As preparatory operations before
assembling CPT, wind cotton Tape for
2. Notes protecting to CPT NECK and DY, CPT
(1) Because this is not a hot chassis, it is not necessary to use connection parts. At this moment, end
an isolation transformer. However, the use of isolation of tape should be over-lapped and
transformer will help protect test instrument. wound in direct route to the NECK.
(2) Adjustment must be done in the correct order.But the
adjustment can be changed by consideration of mass Assembling DY to Fix the Magnet to the position as
production. CPT shown picture below. Be careful not to
(3) The adjustment must be performed in the circumstance of make CPT neck shadow while
25±5°C of temperature and 65±10% of relative humidity if HEAT RUN adjusting DY.
there is no specific designation. Convergence Magnet 4 2
6Pole
(4) The input AC voltage of the receiver must keep rating Degaussing
voltage in adjusting.
(5) The receiver must be operated for about 15 minutes prior STC Adjustment
to the adjustment. ¢‚
¢‚

15 ~ 20mm
PURITY Adjustment

3. Focus adjustment DY Fixing Let the screen Standard condition.

Operate Heat-Run at least 15
3.1. Preliminary steps SCREEN Voltage adj. minutes.

Torque is to be 9-11 kg f.cm when

Tune the TV set to receive a digital pattern. W/B Fixing fixing DY.
(SVC mode:Automatically mode change the STANDARD
MODE) FOCUS not yet ADJ.

3.2. Adjustment Method STC not yet ADJ.

1) Single Focus CPT

DYC not yet ADJ.
Adjust the upper Focus volume of FBT for the best focus of
horizontal line A,vertical line B.
4.1. Color purity adjustment
2) Double Focus CPT
a) Adjust the lower Focus volume of FBT for the best focus (1) It makes CPT or CABINET enough to demagnetization.
of vertical line B. (2) Receive the signal of red raster.
b) Adjust the upper Focus volume of FBT for the best focus (3) Loosen fixed screw of DY and closely to CPT funnel part.
of area A. (4) Check the center of screen that PURITY MAGNET of CPT
c) Repeat above step 1) and 2) for the best overall focus. by crossing adjustment. At this time, 4 & 6 pole magnet is
located to magnet of nothing.
(5) Move the DY to make equal red on whole screen and it
does not to make the DY by fixed screw after check a
simple color of Red/Green/Blue and white raster whether or
not it is a pollution of color.
A B (At this time, take care raster of screen and DY must fixing
in the condition which maintains a horizontality.)
(6) Check the TV set by move direction.

4.2. Convergence adjustment

These adjustments can the best condition of focus after

finished purity adjustment.

(1) Receive the signal of cross hatch that BACK RASTER is

black.
<Fig 1. PAL Digital Pattern(EU05CH)> (2) Adjust brightness and luminosity till dot appear 9 ~12.
(3) Open angle of the two tab of 4 pole MAGNET by isogonic
angle and accord with vertical line of red and blue color in
the middle of screen.
(4) Maintain as angle of (3) and rotate the tab to accord with
vertical line of Red and Blue color in the middle of screen.

-7 -

Downloaded from www.Manualslib.com manuals search engine

 (5) Open angle of the two tab of 6 pole magnet by isogonic 2. White balance IIC Parameter
angle and accord with vertical line of Red/Blue and Green.
Program TWBeng2.0 Program TWBeng2.0 Speed Delay
(6) Maintain as angle of (5) and rotate the tab to accord with
horizontal line. In case of twisted horizontal line,repeat Vcd Slave 24C16 Eprom_Slave AE 1 30
adjustment of (3) ~ (5) remembering the movement of
Red/Green/Blue color. R_Amp R_Cut B_Amp B_Cut
(7) Move the DY to best condition of convergence and attach
Program TWBeng2.0 TWBeng2.0 TWBeng2.0 TWBeng2.0
the CPT to a rubber-chock for fixed DY.
Sub Add 1C8 1C3 1CA 1C5
Start Bit 12 12 12 12
5. Screen voltage adjustment Stop Bit 4 4 4 4

(1) Receive the PAL or SECAM(NTSC) signal into RF mode Offset 0 0 0 0

regardless of channel. Polarity 1 1 1 1
(2) If you press the “ADJ”button in LINE SVC mode(IN-START
EP_Rom_S 7A7B 7475 7E7F 7879
button),the LINE SVC mode changes to screen adjustment
mode. Speed/ Plus 1 1 1 1
(3) Turn the Screen Volume of FBT to change luminance of
White signal center as shown below. <CAUTION> W/B Program “Twbeng_v2.0”
(4) Press the EXIT TV/AV button to exit SVC mode. - W/B adjustment after Cutoff
: Instart -> adj. -> mute(cutoff)-> tv/av(wb)
Release key is EXIT key
6. White balance adjustment - W/B adjustment
: Instart -> mute(cpuoff) ->
NOTE : When adjusting white balance automatically,connect the Release key is TV/AV key
adjustment JIG in SVC mode.(When pressing IN-
START,MUTE button on remote control for adjustment
orderly,it changes to SVC mode and screen displays 7.Deflection setting Data Adjustment
“CUT OFF”.)
(1) Receive 100% white pattern. 7.1 Adjustment preparation
(2) Adjust LOW LIght status(4.5FL) of CUT R,CUT B at (1) Tune the TV set to receive an Digital pattern(EU05CH).
CG:70. (2) Deflection setting data adjustment is operate by SVC
(3) Adjust HIGH LIght status(35FL) of WDR R,WDR B at communicator.
WDR G:380. (3) Enter the deflection mode by selection SERVICE1 key on
(4) Repeat above step (2) and (3) for the best condition each SERVICE MENU after enter the adjustment mode by
status of High Light and Low Light. pressing LINE SVC MODE(IN-START KEY).
<Table 1> White Balance Color analyzer (4) Enter the deflection mode by pressing ADJUST key.
(5) Use the CH D ,E key to select adjustment item.
Menu EU N-EU (6) Use the VOL F ,G key to increase/decrease data.
X 288 268
<Note>
Y 295 273
(1) When adjusting a deflection,adjust N50Hz of PAL signal first and
Color Temperature 9000oK 13000oK adjust a deflection at Normal 60Hz(NTSC).
(2) Adjust a deflection as shown below.
<Table 2> White Balance Initial Data PAL 4:3 -> NTSC 4:3
(3) After finishing deflection adjustment,press the EXIT key to
Menu Range DATA exit in adjustment mode.
LOW LIGHT CR 0 ~ 511 70 (4) Wide Models
After adjusting 16:9(50Hz), Readjust 14:9(50Hz) ->
CG 0 ~ 511 70
ZOOM(50Hz) -> 4:3(50Hz) -> 16:9(60Hz) -> 14:9(60Hz) ->
CB 0 ~ 511 70 ZOOM(60Hz) -> 4:3(60Hz).
HIGH LIGHT WR 0 ~ 511 430
WG 0 ~ 511 380
7.2 Adjustment
WB 0 ~ 511 430 (1) VL(Vertical Linearity) adjustment:
Adjust the top & bottom size of inner circle to be equal.
<Table 3> White Balance Initial Data (2) VA (Vertical Amplitude) adjustment:
1. IC Adjust so that the circle of a digital circle pattern should be
Name Maker Algorithm located interval of 6~7mm from the effective screen of the
CPT.
VCD IC VCT48xyi Micronas (3) SC (Vertical S correction) adjustment:
0 F 0 0 Adjust so that all distance between each lattice width of
EP_ROM 24C16 ST, ATMEL
top/center/bottom are to be the same.

-8 -

Downloaded from www.Manualslib.com manuals search engine

 N50Hz(PAL) N60Hz(NTSC)
Menu Variable range
29” 29”
VS -512~511 4 10
VA -512~511 80 70
VL -512~511 -70 -70
SC -512~511 140 140
HS 32~2047 110 130
EW -256~255 -70 -69
ET -512~511 -12 -15
<Fig. 2>PAL Digital pattern (EU05CH) EP -512~511 -80 -78

(4) VS (Vertical Shift) adjustment: ANGLE -512~511 0 0

Adjust so that the geometric vertical center line is in accord BOW -512~511 0 0
with vertical center line of CPT.
(5) HS(Horizontal Shift) adjustment: UPCOR -512~511 8 8
Adjust so that the geometric horizontal center line is in LOCOR -512~511 20 20
accord with horizontal center line of CPT.
(6) EW(East-West Width) adjustment: PIP_H 0~40 15 15
Adjust until the outmost left and right lattice of received
pattern is accord with 25% of other lattice width.
(7) ET(Trapezoidal) adjustment: 8.OPTION Adjustment
Adjust to make the length of top horizontal line same with it
of the bottom horizontal line. 8-1. Preparation for Adjustment
(8) EP(Pin Cushion) adjustment: 1) This option adjustment decides function in accordance with
Adjust so that middle portion of the outermost left and right model. Press the SVC TX adjustment button(IN-START
vertical line look like parallel with vertical lines of the CPT. button) at SVC mode, then adjust the option at OPTION1
(9) ANGLE adjustment mode.
When you adjust the angle, adjust correctly raster of 2) Mark the option adjustment data like [111,111,111,111] in
left/right screen. BOM.
(10) BOW adjustment
A standard is not changing the default value. 8-2. Adjustment Method
(11) CRNU(Upper Corner Correction) adjustment: OPTION data input
After finished EP adjustment,adjust vertical line of left- 1) Function : 1, No function : 0
top,right-top of screen to the best straight line. 2) Select each OPTION function by the CH Up/Down
(12) CRNL(Lower Corner Correction) adjustment: button and then set up each OPTION by the VOL
After finished EP adjustment,adjust vertical line of left- Up/Down button at OPTION 1,2,3,4.
bottom ,right-bottom of screen to the best straight line.
(13) PIP(PIP Position) 8-3. OPTION Function
Adjust until the distance between PIP and main picture Option Code Function
becomes about 1~2mm by using VOL +/- key.
AV3 0 Without A/V3
1 With AV3
S-VIDEO 0 With out S-VIDEO
1 With S-VIDEO
DVD 0 Without COMPONENT(480i)
1 With COMPONENT(480i)
SCART 0 PHONE JACK
1 SCART JACK
WIDE 0 Not WIDE MODEL
1 WIDE MODEL
GAME 0 Without GAME function
<Fig. 3> PIP H Position
1 With GAME function
21inch 0 Not 21inch MODEL
1 21inch MODEL
A2ST 0 NICAM
1 NICAM & FM STEREO

-9 -

Downloaded from www.Manualslib.com manuals search engine

 8-4. OPTION2 Function
Option Code Function
TSEARCH 0 Without TURBO SEARCH
1 With TURBO SEARCH
200PR 0 100 PROGRAM SAVE
1 200 PROGRAM SAVE
EYE 0 Without EYE
1 With EYE
TX019 0
1
8KEY 0
1 8KEY
4KEY 0
1 4KEY

8-5. OPTION3 Function

Option Code Function REMARK

SYSTEM 0
1

ACMS 0 Without ACMS Function

1 With ACMS Function

TOP 0 FLOT TXT

1 TOP TXT

CH+AU 0 Without D/K CHINA or BB SYSTEM

1 With D/K CHINA or BB SYSTEM China, Australia

HDEV 0
1

- 10 -

Downloaded from www.Manualslib.com manuals search engine

 TROUBLE SHOOTING

RF- STEREO

Selected correct system

In menu
OK
Check the waveform NO Check / Replace
IF 1 of TU101 TU 101
OK
Check the waveform NO NO
Check The Voltage Check The voltage
At pin 4, 5 of IC11 At pin 2, 19, 20, 21, 24 of IIC11 At pin of IC821, IC822, Q807
OK NO
Check the waveform Check / Replace
At pin 2, 4 of IC601 C821, IC822, Q807
OK
Check the Voltage NO
Check / Replace Q601
At pin 6 of IC601
OK
Check the waveform
At pin 8, 9, 11, 12 of IC601
OK
Check the Voltage NO Check / Replace
At pin 5, 6 of IC602 F806, D828(D805)

No Raster / Sound OK

Check the
Heater voltage of CPT
(6 ~ 6.5Vrms)

OK NO

Check Check Check the

HV, Screen Voltage of R, G, B out of Heater pulse of FBT
CPT CPT Board T402

NO OK NO OK NO

Check Check 200V line of Check Check Check

FBT T402 CPT Board IC901, P903A FR901, P402A FBT T402
& if no problem P402B, FR 401
check and Replace

- 11 -

Downloaded from www.Manualslib.com manuals search engine

 NO RASTER

CHECK B+
At D829 cathode
Normal Abnormal

Is the voltage at Open

Check
each pin voltage of IC11 Fuse of AC line
No
Yes Check / Replace
Ok
Check the Fuse
Check pin 60 In/out of Check the Voltage No
No Of IC11(H - Out) regulator Of C803
(IC821, IC822
Check & IC823, IC824
Replace Yes Ok 140 ~ 310V Check / Replace
IC825)
IC11 DB801
Check Q402 Check the Voltage No
No Collector waveform Pin 4 of IC801

Check & Ok 18 ~ 20V

Replace Yes Check / Replace
Q402 Check / Replace Fuse IC801
IC801, IC802, IC826
Check T401
No & each pin voltage

Yes No
Check & Check Fuse and Rectifition Diode of
Replace secondary Load of SMPS trans(T803)
T401
Check Q401
No Collector waveform
Ok Check / Replace
Check & Yes IC11
Replace
Q401

Check & Replace

T402

- 12 -

Downloaded from www.Manualslib.com manuals search engine

 No Picture / No Sound

Is any OSD displayed?

No OK
OK
OK Check IC11 pin71,72,73 Check receiving system in MENU
(R,G,B out) & execute Auto - Program.

Does the auto - Program

No Operate properly.
OK

Store on manual - program MENU

No No Go to
Check pin40(V out 1) Check 1.8V, 3.3V, Check SMPS Trans No Sound /
1V p-p 5V DC Voltage Secondary Voltage Picture OK
OK
No
Check pin18 Check IC13
Reset Voltage (Reset IC)
3.3V DC OK
No
Check pin57, 58 Check IC12(EEPROM)
No SCL, SDA & SCL, SDA, Line
3.3V swing OK

Relace IC11

Q501, Q503, Q504 Check / Replace

(R, G, B out of IC11) CPT Board component

- 13 -

Downloaded from www.Manualslib.com manuals search engine

 AV Stereo

Select correct system

In menu
OK
OK
Check the connection
Of AV equipment

Check the the waveform NO

AV Check TU101 Tuner
At pin16, 17 of IC11

OK OK
NO Check the voltage
Check the waveform
At pin4, 5, of IC11 Of pin2, 19, 20, 21,24 of IC11

OK
NO Check the signal line of
Check waveform
At pin 2, 4 of IC601 SPK-L,R

OK
NO
Check the voltage Check pin 55 (mute)
At pin6 of IC601 of IC11

OK
NO Check the vpltage NO Check /Replace
Check the waveform
At pin 8, 9, 11, 12 of IC601 At pin7, 5 of IC601 D828, D805, F806

OK

Check the connection of NO

Connect the Board
side or Front AV Board
P603A

OK

Replace IC601

- 14 -

Downloaded from www.Manualslib.com manuals search engine

 PRINTED CIRCUIT BOARD
MAIN

- 15 -

Downloaded from www.Manualslib.com manuals search engine

 SIDE A/V CONTROL

POWER

- 16 -

Downloaded from www.Manualslib.com manuals search engine

 [ Po wer ]

Tilt ( Op t .) EYE( Op t . )
PRE-AMP
14V 9V
ST 5V LED
IC824
ST-3. 3V

Downloaded from www.Manualslib.com manuals search engine

78S06 EEPROM
SMPS IC853 IC825
ICP02
TRANS ST-1.8V SDA- 9489X
3. 3V
14V 11 14V ( PIP Processor )

Relay ICP01

14V
LA7222 PIP &
3. 3V

ST-1.8V
ST-3.3V
T802 AV SW

8V
( Aud io Swit c h)

3.3V
IC821

- 17 -
IC822 IC602 ( OPT. )
5V
6.5V 12 78R05 17V

VCT49XYI LA42152 IC601

BLOCK DIAGRAM

5V So und AMP
IC11

17V
13
So und Vcc 14V( FBT) LA 7845 (V-AMP)
5V

Tuner Tuner 28V (FBT) EW AMP

33V 16 H-DRIVE ( Main) ( Sub )

TDA6109 IC901
110V( Flat) 200V( FBT)
120 V( No rm al) 18 VM
FBT STK396-110
12V HIC920
( VM IC)
 L/ R SPKR-L
(( LA42071 H/ P PR+ PR- VOL+ VOL- OK Menu
LA42072 SPKR-R
3
(( LA42152 SIF
LA7222 GAME
MODULE
CLK CPT/ VM

Downloaded from www.Manualslib.com manuals search engine

KEY PRESET TDA6109
SAW
IR
MAIN STICK
VIDEO
SUB AUDIO VS
IFIN+ EHT
IFIN- Va VER.
SW1 Vb TDA4863
RGB
AIN1 L/ R o ut
AIN2 L/ R SVM HS
o ut
AIN3 L/ R Hf b

- 18 -
VCTi HOR. / EW
V1 Hout
49xxl
V2
AOU T1 AUDIO
V3
VOUT 1/2 VIDEO
Y3 PIP
C3 VIDEO
RIN
R/ Pr GIN
G/ Y BIN
B/Pb SVCC

Vid eo + 110V POWER.

PIP + 12V
STR P
+ 5V
X6757 N
R G B + 3. 3V
+ 1. 8V
 MEMO

- 19 -

Downloaded from www.Manualslib.com manuals search engine

 EXPLODED VIEW

913
150 153 943
400

170

112

174

520
120

310 501
550

540

600

330 320 601

300

700

- 20 -

Downloaded from www.Manualslib.com manuals search engine

 The components identified by mark is
critical for safety.
EXPLODED VIEW PARTS LIST Replace only with part number specified.

LOCA. No. PART No. DESCRIPTIONS

112 2426VSF0013 CPT SET, 29” SF A68KYN690X000MYB BARE (L,N,M,K,P)

120 120-C77G SPEAKER,FULLRANGE C122P02K1459 8 OHM 10/15W 130 57*117

150 6140VC2001R COIL,DEGAUSSING 29 FLAT (W) SELLA TECH 15 OHM 58T/0.55

153 6150Z-1040B DY(DEFLECTION YOKE) DC29SLSF1

170 170-844J CPT EARTH, 29” 96T 2LUG 2P HUG

174 6410VEH001E POWER CORD, 174-009Q VDE/SEMKO 2410MM 300 BLACK

300 3091V00277S CABINET ASSEMBLY, CT-29M65VE(SY-SET) MC049A #117A SPRAY

310 5020V00428C BUTTON, CONTROL CT-29M65VE ABS, HF-380 6KEY #117A SPRAY”

320 320-062E SPRING, KNOB

330 5020V00421C BUTTON, POWER CT-29M65VE ABS, HF-380 1KEY #117A SPRAY

400 3809V00205E BACK COVER ASSEMBLY, CT-29M66T 2PHONE MC007A

501 3210V00043J FRAME, CHASSIS HIPS 407AF CT-25Q4 MC-022A

520 6871VMMT20D PWB(PCB) ASSEMBLY,MAIN MC049A CT-29M65VE.LLLLSM8

540 6871VSMJ43A PWB(PCB) ASSEMBLY,SUB POWER MC-049A M60 LGESY

550 6871VSMJ32C PWB(PCB) ASSEMBLY,SUB CTL MC-049A M60 LGESY

600 6871VSMJ30C PWB(PCB) ASSEMBLY,SUB A/V MC-049A M60 LGESY

601 4810V00254E BRACKET, SIDE AV CT-29M65VE(AV3) MC049A ABS, HF-380 #117A

700 0IGL120104A IC,LG SEMICONDUCTOR CDS SENSOR MODULE(P1201-04)

913 332-229G SCREW,DRAWING HEXAGON D22 L40

943 1PTF0403116 SCREW TAP TITE(P),TRUSS HEAD + D4.0 L16.0 MSWR3/FZB

- 21 -

Downloaded from www.Manualslib.com manuals search engine

 REPLACEMENT PARTS LIST
For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film
charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film
in the P/No. means as follows; CE : Electrolytic RN : Metal Film
RF : Fusible

LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION

D407 0DRTW00164A RGP10J TP52 DO41 .V 1A 30A .SEC 5UA

IC
D408 0DD414809ED 1N4148 TP
I7 0IPMGPH002A TDA4863A 7P SOT524-1 1N4148 TP
D501 0DD414809ED
IC11 0IZZVA1001D VCT3804F DIP 64P DIP VCTI49XY 1N4148 TP
D502 0DD414809ED
IC11 0IMCRMN026A VCT4973F MICRONAS 88P PSSDIP 1N4148 TP
D503 0DD414809ED
IC12 0IMMRSG036C M24C16-WBN6 8PIN PDIP ST 16M 1N4148 TP
D601 0DD414809ED
IC13 0IFA752700A KA75270Z 3 TP RE-SET IC MC-007 1N4148 TP
D602 0DD414809ED
IC302 0IKE455800E KIA4558 8DIP DUAL OP AMP 1N4148 TP
D603 0DD414809ED
IC601 0IPMGSA021C LA42152 13P ST 15W 2CH AUDIO AMP 1N4148 TP
D604 0DD414809ED
IC801 0IPMGSK015B STR-X6756 7PIN TO3PF-7L ST PWR IC EU1ZV(1) TP SANKEN
D801 0DD100009AM
IC802 0ILI817000G LTV817M-VB 4P,DIP BK EU1ZV(1) TP SANKEN
D802 0DD100009AM
IC821 0IMCRKE019A KIA78R33API KEC 4P TO220 ST 3.3V 1A EU1ZV(1) TP SANKEN
D803 0DD100009AM
IC822 0IMCRKE018A KIA78R05API KEC 4P TO220 ST 5V 1A TVR06J TP - 600V 250NSEC
D815 0DD060009AC
IC824 0IMCRKE020A KIA78S06P KEC 3P TO-92 TP 6V 0.15A RGP10J TP52 DO41 .V 1A 30A .SEC 5UA
D821 0DRTW00164A
IC825 0IMCRAU003A S1117-18PIC AUK KOREA 3P TO220F ST 1.8V 1A 1N4148 TP
D823 0DD414809ED
IC826 0ISK120000A SE120N 3P 120V ERROR AMP D827 0DRTW00141A SFAF504G ST ITO220 200V 5A .A .SEC 10UA
IC853 0IMCRAU004A S1117-33PIC AUK KOREA 3P TO220F ST 3.3V 1A D828 0DRTW00141A SFAF504G ST ITO220 200V 5A .A .SEC 10UA
IC901 0IPH610700B TDA6107JF/N3 9P ST RGB AMP D829 0DD410000AD RU4AM,LF-L1 SANKEN SANKEN

TRANSISTOR D830 0DRTW00164A RGP10J TP52 DO41 .V 1A 30A .SEC 5UA

D854 0DD060009AC TVR06J TP - 600V 250NSEC
Q104 0TR319709AB KTC3197,TP(KTC388A),KEC D901 0DR210009AC BAV21 TP DO35 200V 0.2A 1A 50SEC 100A
Q301 0TR198009BA 2SA1980Y TP AUK D902 0DR210009AC BAV21 TP DO35 200V 0.2A 1A 50SEC 100A
Q303 0TR127409AB KTA1274-Y TO-92L TP KEC D903 0DR210009AC BAV21 TP DO35 200V 0.2A 1A 50SEC 100A
Q401 0TR205900AB KTD2059-Y TO-220IS KEC D904 0DR140049AC 1N4004A T-81 TP DO41 500V 1.0A 30A - 10UA
Q401 0TRSA10001C 2SD2689LS SANYO ST TO220F 1500V 10A DB801 0DRTW00131C TS6P05G ST TSOP-6 600V 6A .A .SEC .A
Q402 0TR437000BA KTC4370A-Y TO-220IS KEC LD1101 0DD000000BA SA5711-B(DL-1LO(S)) BK AMBER
Q501 0TR198009BA 2SA1980Y TP AUK Q401 0DSFC00011A FFPF60B150DS ST TO220F 600V 20A 120A
Q502 0TR198009BA 2SA1980Y TP AUK ZD10 0DZ910009BD GDZJ9.1B TP DO34 0.5W 9.1V
Q503 0TR198009BA 2SA1980Y TP AUK ZD122 0DZ330009DG GDZJ33B TP DO34 0.5W 33.0V
Q504 0TR198009BA 2SA1980Y TP AUK ZD401 0DZ510009BF GDZ5.1B TP DO34 0.5W 5.1V 0.02A
Q505 0TR534309AA 2SC5343Y TP AUK ZD402 0DZ110009AD MTZJ11B TP ROHM-K DO34 - 11V 5UA
Q507 0TR198009BA 2SA1980Y TP AUK ZD501 0DZ110009AD MTZJ11B TP ROHM-K DO34 - 11V 5UA
Q510 0TR534309AA 2SC5343Y TP AUK ZD601 0DZ820009AH MTZJ8.2B TP ROHM-K DO34 - 8.2V 5UA
Q601 0TR198009BA 2SA1980Y TP AUK ZD801 0DZ620009AH MTZJ6.2A TP ROHM-K DO34 0.5W 6.2V 150UA
Q801 0TR421009CB BF421L(AMMO)TO-92 TP PHILIPS ZD803 0DZ510009BF GDZ5.1B TP DO34 0.5W 5.1V 0.02A
Q802 0TR534309AA 2SC5343Y TP AUK ZD910 0DZ510009BF GDZ5.1B TP DO34 0.5W 5.1V 0.02A
Q803 0TR102009AB KRC102M(KRC1202) KEC TP ZD911 0DZ510009BF GDZ5.1B TP DO34 0.5W 5.1V 0.02A
Q804 0TR102009AB KRC102M(KRC1202) KEC TP ZD912 0DZ510009BF GDZ5.1B TP DO34 0.5W 5.1V 0.02A
Q805 0TR534309AA 2SC5343Y TP AUK
Q807 0TR127409AB KTA1274-Y TO-92L TP KEC CAPACITOR
Q808 0TR102009AB KRC102M(KRC1202) KEC TP C10 0CX2200K409 22P 50V J SL TA52

DIODE C101 0CQ2721N409 0.0027UF D 100V 5% PE TP5

C104 0CN1030F679 10000P 16V M Y TA52
D301 0DD400509AA 1N4005 TP KEC C106 0CN1030F679 10000P 16V M Y TA52
D302 0DD414809ED 1N4148 TP C107 0CN1030F679 10000P 16V M Y TA52
D403 0DRTW00164B RGP15J TP52 DO15 .V 1.5A 50A 250NSEC C108 0CN1030F679 10000P 16V M Y TA52
D404 0DRTW00164A RGP10J TP52 DO41 .V 1A 30A .SEC 5UA C109 0CN1030F679 10000P 16V M Y TA52
D405 0DRTW00164B RGP15J TP52 DO15 .V 1.5A 50A 250NSEC C11 0CX2200K409 22P 50V J SL TA52
D406 0DRTW00164B RGP15J TP52 DO15 .V 1.5A 50A 250NSEC C110 0CN1030F679 10000P 16V M Y TA52

- 22 -

Downloaded from www.Manualslib.com manuals search engine

 For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film
the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film
digit in the P/No. means as CE : Electrolytic RN : Metal Film
follows; RF : Fusible

LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION

C1101 0CE107DD618 100UF STD 10V M FL TP5 C513 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C111 0CE227DD618 220UF STD 10V M FL TP5 C514 0CE107DD618 100UF STD 10V M FL TP5
C12 0CE107DD618 100UF STD 10V M FL TP5 C517 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C1208 0CE106DF618 10UF STD 16V M FL TP5 C519 0CN1010K519 100P 50V K B TA52
C1240 0CN2210K519 220P 50V K B TA52 C520 0CE107DD618 100UF STD 10V M FL TP5
C1241 0CN2210K519 220P 50V K B TA52 C521 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C126 0CE475DK618 4.7UF STD 50V 20% FL TP 5 C522 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C13 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C524 0CE107DD618 100UF STD 10V M FL TP5
C17 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C526 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C18 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C527 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C19 0CN3310K519 330P 50V K B TA52 C528 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C216 0CE226DF618 22UF STD 16V M FL TP5 C529 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C217 0CE226DF618 22UF STD 16V M FL TP5 C530 0CN1010K519 100P 50V K B TA52
C23 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C532 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C24 0CE226DD618 22UF STD 10V 20% FL TP 5 C533 0CE107DD618 100UF STD 10V M FL TP5
C25 0CE105DK618 1UF STD 50V M FL TP5 C534 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C303 0CQ1041N409 0.1000UF 100V J PE TP C535 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C304 0CE107DJ618 100UF STD 35V M FL TP5 C536 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C306 0CQ3331N509 0.033UF D 100V 10% PE TP5 C537 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C308 0CE476DK618 47UF STD 50V M FL TP5 C538 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C309 0CN4710K519 470P 50V K B TA52 C540 0CE107DD618 100UF STD 10V M FL TP5
C310 0CQ1031N509 0.01UF D 100V 10% PE TP5 C541 0CE107DD618 100UF STD 10V M FL TP5
C402 0CE475DK618 4.7UF STD 50V 20% FL TP 5 C542 0CE107DD618 100UF STD 10V M FL TP5
C403 0CQ1521N509 0.0015UF D 100V 10% PE TP5 C543 0CE107DD618 100UF STD 10V M FL TP5
C404 181-015Q 0.02UF 1.6KV H M/PP NI FM20 C545 0CK1010K515 100P 50V KB TS
C405 181-091G DEHR33D471KN3A 470PF 2KV 10% C547 0CN2710K519 270P 50V K B TA52
C406 181-010H PP 400V 0.039UF K C548 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C407 0CE475DK618 4.7UF STD 50V 20% FL TP 5 C602 0CE108DH618 1000UF STD 25V M FL TP5
C409 0CK2220W515 2200P 500V K B TS C603 0CE475DK618 4.7UF STD 50V 20% FL TP 5
C410 0CE105CR636 1UF SHL,SD 250V 20% BP(D) TP FM5 C604 0CQ2731N509 0.027UF D 100V 10% PE TP5
C411 181-038K 0.56UF D 250V J M/PP FM20 C605 0CE476DF618 47UF STD 16V M FL TP5
C413 0CE107DJ618 100UF STD 35V M FL TP5 C606 181-007C MPE ECQ-V1H104JL3(TR), 50V 0.1UF
C414 0CK2710W515 270P 500V K B TS C607 0CE106DF618 10UF STD 16V M FL TP5
C415 0CE108DH618 1000UF STD 25V M FL TP5 C608 0CE106DF618 10UF STD 16V M FL TP5
C416 181-009R PP 200V 0.022UF K C609 0CQ2731N509 0.027UF D 100V 10% PE TP5
C417 0CK2710W515 270P 500V K B TS C610 0CE475DK618 4.7UF STD 50V 20% FL TP 5
C419 0CE108DH618 1000UF STD 25V M FL TP5 C611 0CE476DH618 47UF STD 25V 20% FL TP 5
C420 181-009C PP 200V 0.056UF J C612 181-007C MPE ECQ-V1H104JL3(TR), 50V 0.1UF
C421 0CK2710W515 270P 500V K B TS C613 181-007C MPE ECQ-V1H104JL3(TR), 50V 0.1UF
C422 0CE475DR618 4.7UF STD 250V 20% FL TP 5 C614 181-007C MPE ECQ-V1H104JL3(TR), 50V 0.1UF
C501 0CQ6831N509 0.068UF D 100V 10% PE TP5 C615 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C502 0CQ6831N509 0.068UF D 100V 10% PE TP5 C616 0CE476DD618 47UF STD 10V 20% FL TP 5
C503 0CQ3331N509 0.033UF D 100V 10% PE TP5 C617 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52
C504 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C618 0CN1010K519 100P 50V K B TA52
C505 0CN2710K519 270P 50V K B TA52 C619 0CE106DK618 10UF STD 50V M FL TP5
C506 0CN2710K519 270P 50V K B TA52 C620 0CN1010K519 100P 50V K B TA52
C507 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C624 0CF3341L438 0.33UF D 63V 5% TP 5 M/PE NI
C508 0CE107DD618 100UF STD 10V M FL TP5 C625 0CF3341L438 0.33UF D 63V 5% TP 5 M/PE NI
C509 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C626 0CF3341L438 0.33UF D 63V 5% TP 5 M/PE NI
C510 0CE475DK618 4.7UF STD 50V 20% FL TP 5 C627 0CK1030K945 0.01UF 50V Z F TR
C511 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 C631 0CF3341L438 0.33UF D 63V 5% TP 5 M/PE NI
C512 0CE107DD618 100UF STD 10V M FL TP5 C632 0CF3341L438 0.33UF D 63V 5% TP 5 M/PE NI

- 23 -

Downloaded from www.Manualslib.com manuals search engine

 For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film
the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film
digit in the P/No. means as CE : Electrolytic RN : Metal Film
follows; RF : Fusible

LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION

C636 0CF3341L438 0.33UF D 63V 5% TP 5 M/PE NI L503 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP

C802 0CQZVBK002A A.C 275V 0.1UF M (S=15) L504 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP
C803 0CE337KV6A0 330UF SLT 450V 20% VNSN BULK L505 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP
C804 0CK10201515 1000P 1KV K B TS L506 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP
C806 0CK10201515 1000P 1KV K B TS L507 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP
C809 0CE105DK618 1UF STD 50V M FL TP5 L508 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP
C810 0CE336DK618 33UF STD 50V M FL TP5 L509 0LA0152K119 INDUCTOR,15UH K 2.3*3.4 TP
C811 181-014Y MPP 1.6KV 0.0015UF J L801 150-C02F COIL,CHOKE 82UH PHY TURN
C813 0CK4710W515 470PF 500V K B TR T401 151-C02F TRANSFORMER,H-DRIVE,EI-19,BULK
C815 0CK8210K515 820P 50V K B TS T803 6170VMCC01P TRANSFORMER,EER5345 300UH B+120V
C817 0CK1040K945 0.1UF 50V Z F TR
CONNECTOR
C819 0CK1520K515 1500P 50V K B TS
C820 0CN1040K949 0.1UF D 50V 80%,-20% F(Y5V) TA52 P07B 387-A05J 5P 2.5MM 500MM H-B UL1007AWG26
C821 181-091C DEHR33A471KN2A 470PF 1KV 10%,-10% P08B 387-A06J 6P 2.5MM 500MM H-B UL1007AWG26
C822 0CE477DH618 470UF STD 25V M FL TP5 PA01B 387-A04D 4P 2.5MM 250MM H-B UL1007AWG26
C823 0CE477DD618 470UF STD 10V M FL TP5
C824 0CE108DD618 1000UF STD 10V M FL TP5
RESISTOR
C825 0CK47201510 4700P 1KV K B S F802 0RP0050H709 0.05 OHM 1/2 W 10% TA52
C826 0CE108DD618 1000UF STD 10V M FL TP5 F804 0RP0050H709 0.05 OHM 1/2 W 10% TA52
C827 0CE108DD618 1000UF STD 10V M FL TP5 F805 0RP0020J809 0.02 OHM 1 W 20% TA52
C828 0CE477DD618 470UF STD 10V M FL TP5 F806 0RP0020J809 0.02 OHM 1 W 20% TA52
C829 0CE335CK636 3.3UF SHL,SD 50V 20% FM5 BP(D) TP FR402 0RP0050H709 0.05 OHM 1/2 W 10% TA52
C830 0CE108DH618 1000UF STD 25V M FL TP5 FR403 0RP0050H709 0.05 OHM 1/2 W 10% TA52
C831 0CE227DP61A 220UF STD 160V 20% FL TP 7.5 FR404 0RP0050H709 0.05 OHM 1/2 W 10% TA52
C833 0CE107CP618 100U SHL 160V M FL TP5 FR405 0RP0050H709 0.05 OHM 1/2 W 10% TA52
C834 181-091Y R 680PF 2KV 10%,-10% R/TP TP7.5 FR901 0RF0121K607 1.2 OHM 2 W 5.00% TA62
C835 0CK4710W515 470PF 500V K B TR J204 0RD1000F609 100 OHM 1/6 W 5% TA52
C837 0CQ4731N509 0.047UF D 100V 10% PE TP5 J208 0RD1000F609 100 OHM 1/6 W 5% TA52
C838 0CE227DK618 220UF STD 50V M FL TP5 J211 0RD1000F609 100 OHM 1/6 W 5% TA52
C839 0CE106DH618 10UF STD 25V M FL TP5 J220 0RD1000F609 100 OHM 1/6 W 5% TA52
C840 0CE228BF618 2200UF KME 16V M FL TP5 J222 0RD1000F609 100 OHM 1/6 W 5% TA52
C843 181-120K 2200PF 4KV M E FMTW LEAD 4.5 J261 0RD1000F609 100 OHM 1/6 W 5% TA52
C845 0CE107DD618 100UF STD 10V M FL TP5 J509 0RD1000F609 100 OHM 1/6 W 5% TA52
C846 181-091X R 560PF 2KV 10%,-10% R/TP TP7.5 J510 0RD1000F609 100 OHM 1/6 W 5% TA52
C868 0CE227DD618 220UF STD 10V M FL TP5 J512 0RD1000F609 100 OHM 1/6 W 5% TA52
C901 0CE475DR618 4.7UF STD 250V 20% FL TP 5 J566 0RD1000F609 100 OHM 1/6 W 5% TA52
C902 0CQ1044R539 0.1UF TE 250V 10% M/PE NI TP5 R102 0RD7501F609 7.5K OHM 1/6 W 5.00% TA52
C903 181-033S 2KV B 122K TP7.5 R105 0RD7502F609 75K OHM 1/6 W 5.00% TA52
C904 0CE475DR618 4.7UF STD 250V 20% FL TP 5 R109 0RD0562F609 56 OHM 1/6 W 5.00% TA52
R11 0RD1000F609 100 OHM 1/6 W 5% TA52
COIL & INDUCTOR
R110 0RD8200F609 820 OHM 1/6 W 5.00% TA52
L101 0LA0102K139 INDUCTOR,10UH K 4*10.5 TP R111 0RD0682F609 68 OHM 1/6 W 5.00% TA52
L103 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP R112 0RD1501F609 1.5K OHM 1/6 W 5% TA52
L12 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP R113 0RD3000F609 300 OHM 1/6 W 5.00% TA52
L1203 0LA0102K119 INDUCTOR,10UH K 2.3*3.4 TP R1143 0RD3300F609 330 OHM 1/6 W 5.00% TA52
L1204 0LA0102K119 INDUCTOR,10UH K 2.3*3.4 TP R1146 0RD3900F609 390 OHM 1/6 W 5% TA52
L1243 0LA0472K119 INDUCTOR,47UH K 2.3*3.4 TP R1147 0RD2200F609 220 OHM 1/6 W 5.00% TA52
L1244 0LA0472K119 INDUCTOR,47UH K 2.3*3.4 TP R1148 0RD3000F609 300 OHM 1/6 W 5.00% TA52
L401 150-717J COIL,CHOKE CHOKE 560UH (E/W) R1149 0RD3300F609 330 OHM 1/6 W 5.00% TA52
L402 150-L01D COIL,LINEARITY 20UH 1PHY 1TURN 1 R1150 0RD4300F609 430 OHM 1/6 W 5.00% TA52
L501 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP R1201 0RD0752F609 75 OHM 1/6 W 5.00% TA52
L502 0LA0101K119 INDUCTOR,1.0UH K 2.3*3.4 TP R1230 0RD2200A609 220 OHM 1/2 W(7.0) 5.00% TA52

- 24 -

Downloaded from www.Manualslib.com manuals search engine

 For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film
the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film
digit in the P/No. means as CE : Electrolytic RN : Metal Film
follows; RF : Fusible

LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION

R1231 0RD2200A609 220 OHM 1/2 W(7.0) 5.00% TA52 R404 0RD0332A609 33 OHM 1/2 W(7.0) 5.00% TA52
R124 0RD2202F609 22K OHM 1/6 W 5% TA52 R405 0RS1500K690 150 OHM 2 W 5% MF5.0
R125 0RD2700A609 270 OHM 1/2 W(7.0) 5.00% TA52 R408 0RS0221K619 2.2 OHM 2 W 5% TR
R126 0RD1000F609 100 OHM 1/6 W 5% TA52 R409 0RD1801A609 1.8K OHM 1/2 W(7.0) 5.00% TA52
R127 0RD1000F609 100 OHM 1/6 W 5% TA52 R410 0RMZVBK002D 15K OHM 5W +/-5% RSR V-TYPE
R201 0RD0752F609 75 OHM 1/6 W 5.00% TA52 R411 0RS5102H609 51K OHM 1/2 W 5.00% TA52
R202 0RD0752F609 75 OHM 1/6 W 5.00% TA52 R412 0RD7501A609 7.5K OHM 1/2 W(7.0) 5.00% TA52
R209 0RD0752F609 75 OHM 1/6 W 5.00% TA52 R413 0RS2202H609 22K OHM 1/2 W 5.00% TA52
R210 0RD0752F609 75 OHM 1/6 W 5.00% TA52 R414 0RS1001H609 1K OHM 1/2 W 5.00% TA52
R211 0RD0752F609 75 OHM 1/6 W 5.00% TA52 R415 0RD1002F609 10K OHM 1/6 W 5% TA52
R212 0RD0752F609 75 OHM 1/6 W 5.00% TA52 R416 0RD6801F609 6.8K OHM 1/6 W 5.00% TA52
R24 0RD1000F609 100 OHM 1/6 W 5% TA52 R417 0RD8203F609 820K OHM 1/6 W 5.00% TA52
R25 0RD1000F609 100 OHM 1/6 W 5% TA52 R42 0RD4701F609 4.7K OHM 1/6 W 5% TA52
R26 0RD2700F609 270 OHM 1/6 W 5% TA52 R421 0RD3600F609 360 OHM 1/6 W 5.00% TA52
R28 0RD1000F609 100 OHM 1/6 W 5% TA52 R422 0RD1002F609 10K OHM 1/6 W 5% TA52
R29 0RD1000F609 100 OHM 1/6 W 5% TA52 R449 0RD0682F609 68 OHM 1/6 W 5.00% TA52
R30 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52 R501 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52
R301 0RD1501A609 1.5K OHM 1/2 W(7.0) 5.00% TA52 R502 0RN6801F409 6.8K OHM 1/6 W 1.00% TA52
R302 0RN3602F409 36K OHM 1/6 W 1.00% TA52 R503 0RN6801F409 6.8K OHM 1/6 W 1.00% TA52
R303 0RD2400A609 240 OHM 1/2 W(7.0) 5.00% TA52 R504 0RD6801F609 6.8K OHM 1/6 W 5.00% TA52
R304 0RD0561A609 5.6 OHM 1/2 W(7.0) 5.00% TA52 R506 0RD1501F609 1.5K OHM 1/6 W 5% TA52
R305 0RD1002F609 10K OHM 1/6 W 5% TA52 R507 0RD2700F609 270 OHM 1/6 W 5% TA52
R306 0RD1002F609 10K OHM 1/6 W 5% TA52 R508 0RD1201F609 1.2K OHM 1/6 W 5% TA52
R307 0RD3601F609 3.6K OHM 1/6 W 5.00% TA52 R509 0RD3600F609 360 OHM 1/6 W 5.00% TA52
R308 0RD4702F609 47K OHM 1/6 W 5% TA52 R510 0RD3600F609 360 OHM 1/6 W 5.00% TA52
R308 0RD3902F609 39K OHM 1/6 W 5.00% TA52 R511 0RD3600F609 360 OHM 1/6 W 5.00% TA52
R309 0RD2001F609 2K OHM 1/6 W 5% TA52 R512 0RD0332F609 33 OHM 1/6 W 5.00% TA52
R31 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52 R513 0RD0332F609 33 OHM 1/6 W 5.00% TA52
R310 0RD4702F609 47K OHM 1/6 W 5% TA52 R514 0RD0332F609 33 OHM 1/6 W 5.00% TA52
R312 0RD4701F609 4.7K OHM 1/6 W 5% TA52 R515 0RD1600F609 160 OHM 1/6 W 5.00% TA52
R313 0RN0471H509 4.7 OHM 1/2 W 2.00% TA52 R516 0RD1600F609 160 OHM 1/6 W 5.00% TA52
R314 0RN0471H509 4.7 OHM 1/2 W 2.00% TA52 R517 0RD1600F609 160 OHM 1/6 W 5.00% TA52
R315 0RS2700K607 270 OHM 2 W 5.00% TA62 R518 0RD0222F609 22 OHM 1/6 W 5.00% TA52
R316 0RD1000F609 100 OHM 1/6 W 5% TA52 R519 0RD2701F609 2.7K OHM 1/6 W 5% TA52
R317 0RD2702F609 27K OHM 1/6 W 5.00% TA52 R520 0RD1001F609 1K OHM 1/6 W 5% TA52
R318 0RN2001F409 2K OHM 1/6 W 1.00% TA52 R521 0RD3002F609 30K OHM 1/6 W 5.00% TA52
R319 0RN8202F409 82K OHM 1/6 W 1.00% TA52 R522 0RD0152F609 15 OHM 1/6 W 5.00% TA52
R32 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52 R527 0RD2702F609 27K OHM 1/6 W 5.00% TA52
R320 0RD1001F609 1K OHM 1/6 W 5% TA52 R532 0RD1000F609 100 OHM 1/6 W 5% TA52
R321 0RD0561A609 5.6 OHM 1/2 W(7.0) 5.00% TA52 R539 0RD1002F609 10K OHM 1/6 W 5% TA52
R322 0RD1501F609 1.5K OHM 1/6 W 5% TA52 R540 0RD4702F609 47K OHM 1/6 W 5% TA52
R323 0RD2702F609 27K OHM 1/6 W 5.00% TA52 R541 0RD2700F609 270 OHM 1/6 W 5% TA52
R324 0RD4700F609 470 OHM 1/6 W 0.05 TA52 R542 0RD8200F609 820 OHM 1/6 W 5.00% TA52
R325 0RD2701A609 2.7K OHM 1/2 W(7.0) 5.00% TA52 R543 0RD9100F609 910 OHM 1/6 W 5.00% TA52
R326 0RD1501A609 1.5K OHM 1/2 W(7.0) 5.00% TA52 R555 0RD4700F609 470 OHM 1/6 W 0.05 TA52
R328 0RN4302F409 43K OHM 1/6 W 1.00% TA52 R557 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52
R33 0RD1000F609 100 OHM 1/6 W 5% TA52 R558 0RD3001F609 3K OHM 1/6 W 5.00% TA52
R35 0RD1000F609 100 OHM 1/6 W 5% TA52 R601 0RD0221A609 2.2 OHM 1/2 W(7.0) 5.00% TA52
R37 0RD1000F609 100 OHM 1/6 W 5% TA52 R602 0RD0221A609 2.2 OHM 1/2 W(7.0) 5.00% TA52
R38 0RD1002F609 10K OHM 1/6 W 5% TA52 R603 0RD0221A609 2.2 OHM 1/2 W(7.0) 5.00% TA52
R401 0RD2701A609 2.7K OHM 1/2 W(7.0) 5.00% TA52 R604 0RD0221A609 2.2 OHM 1/2 W(7.0) 5.00% TA52
R403 0RD5600A609 560 OHM 1/2 W(7.0) 0.05 TA52 R605 0RD1001F609 1K OHM 1/6 W 5% TA52

- 25 -

Downloaded from www.Manualslib.com manuals search engine

 For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film
the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film
digit in the P/No. means as CE : Electrolytic RN : Metal Film
follows; RF : Fusible

LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION

R606 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52 R909 0RCZVTA002D 1/2 W 1.5K,10%,PLIKOR(HIGH SURGE)
R607 0RD1002F609 10K OHM 1/6 W 5% TA52 R910 0RCZVTA002D 1/2 W 1.5K,10%,PLIKOR(HIGH SURGE)
R608 0RD1001F609 1K OHM 1/6 W 5% TA52 R911 0RCZVTA002D 1/2 W 1.5K,10%,PLIKOR(HIGH SURGE)
R609 0RD1000F609 100 OHM 1/6 W 5% TA52 R912 0RD2204A609 2.2M OHM 1/2 W(7.0) 5.00% TA52
R610 0RD1802F609 18K OHM 1/6 W 5.00% TA52 R925 0RD2200F609 220 OHM 1/6 W 5.00% TA52
R611 0RD1001F609 1K OHM 1/6 W 5% TA52
SWITCH
R612 0RD3301F609 3.3K OHM 1/6 W 5.00% TA52
R613 0RD0221F609 2.2 OHM 1/6 W 5.00% TA52 SW1101 140-315A TACT SKHV17910B LG C&D 12V
R614 0RD1000F609 100 OHM 1/6 W 5% TA52 SW1102 140-315A TACT SKHV17910B LG C&D 12V
R615 0RD1001F609 1K OHM 1/6 W 5% TA52 SW1103 140-315A TACT SKHV17910B LG C&D 12V
R616 0RD2700F609 270 OHM 1/6 W 5% TA52 SW1104 140-315A TACT SKHV17910B LG C&D 12V
R617 0RD1000F609 100 OHM 1/6 W 5% TA52 SW1105 140-315A TACT SKHV17910B LG C&D 12V
R618 0RD1000F609 100 OHM 1/6 W 5% TA52 SW1106 140-315A TACT SKHV17910B LG C&D 12V
R619 0RD1000F609 100 OHM 1/6 W 5% TA52 SWP801 6600VM2002A SDKEA3 ALPS IEC 250V 8A HORIZONTAL 480G
R620 0RD1000F609 100 OHM 1/6 W 5% TA52
R621 0RD1000F609 100 OHM 1/6 W 5% TA52
SPARK GAP, AXAL
R622 0RD1000F609 100 OHM 1/6 W 5% TA52 SG901 165-004A AG20PT 152F-L3N/S-23
R623 0RD1000F609 100 OHM 1/6 W 5% TA52 SG902 165-004A AG20PT 152F-L3N/S-23
R624 0RD1000F609 100 OHM 1/6 W 5% TA52 SG903 165-004A AG20PT 152F-L3N/S-23
R664 0RD1000F609 100 OHM 1/6 W 5% TA52 SG904 6918VAX002H WSP-122N 1200V -100V,+300V
R802 0RKZVTA001K 0.47M OHM 1/2 W 5% TA52
FILTER & CRYSTAL
R803 180-822M RWR 15W 1.0 OHM J PD
R804 0RS4702K619 47K OHM 2 W 5% TR FB1241 125-123A FERRITE BFD3565R2F(TAPING)
R805 0RS4702K619 47K OHM 2 W 5% TR FB401 125-022K FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM
R806 180-A01P 0.13 OHM 2 W 5% TA62 RWR FB801 125-022K FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM
R807 0RD2200A609 220 OHM 1/2 W(7.0) 5.00% TA52 FB802 125-022K FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM
R808 0RD1501F609 1.5K OHM 1/6 W 5% TA52 FB803 125-022K FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM
R809 0RD1001F609 1K OHM 1/6 W 5% TA52 FB825 125-022K FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM
R814 0RK8204H609 8.2M OHM 1/2 W 5.00% TA52 T801 150-F06P LINE FILTER SQE2930 10MH
R816 0RD1001F609 1K OHM 1/6 W 5% TA52 X11 6202VDB007B RESONATOR,HC49U 20.250MHZ 30PPM
R817 0RD0152F609 15 OHM 1/6 W 5.00% TA52 Z101 6200QL3001Z B39361-X6966-D100 EPCOS ST
R823 0RD4701F609 4.7K OHM 1/6 W 5% TA52
JACK
R825 0RD4701F609 4.7K OHM 1/6 W 5% TA52
R827 0RD1001F609 1K OHM 1/6 W 5% TA52 JK1201 380-068D UEJ-CV-003 UGCOM E/P
R828 0RD1501F609 1.5K OHM 1/6 W 5% TA52 JK1203 6613V00004B 3P
R831 0RD2201F609 2.2K OHM 1/6 W 5.00% TA52 JK201 6612VJH011K PPJ109K A/V I/O 6P STEREO FOR21PIN
R838 0RD4701F609 4.7K OHM 1/6 W 5% TA52 JK202 6612VJH011L PPJ109L A/V I/O 6P DVD IN Y-PB-PR ENG
R840 0RF0161K607 1.6 OHM 2 W 5.00% TA62
ACCESSORIES
R841 0RF0161K607 1.6 OHM 2 W 5.00% TA62
R842 0RD1002F609 10K OHM 1/6 W 5% TA52 A1 3828VA0464H MANUAL,OWNERS MC049A RUS/BZ03 LG RU/EN
R843 0RD3300A609 330 OHM 1/2 W(7.0) 5.00% TA52 A2 6710V00112S REMOTE CONTROLLER,MC049A W/O PIP W/O TXT
R844 0RD8200F609 820 OHM 1/6 W 5.00% TA52
10K OHM 1/6 W 5% TA52
MISCELLANEOUS
R845 0RD1002F609
R846 0RD7502F609 75K OHM 1/6 W 5.00% TA52 FP801 0FT4001B51C FUSE, 4000MA 250 V 5.2X20
R847 0RD2203F609 220K OHM 1/6 W 5.00% TA52 PA1101 6712SCA228B REMOTE CONTROLLER RECEIVER,AT138BNN1S
R858 0RD4701F609 4.7K OHM 1/6 W 5% TA52 SK901 6620VBC003A SOCKET (CIRC),CPTPCS030A 8PIN 14/360
R901 0RD2200F609 220 OHM 1/6 W 5.00% TA52 T402 6174V-5013A FBT,BSC28-N2351 29 YINYANG B+120V FBT
R902 0RD2200F609 220 OHM 1/6 W 5.00% TA52 TH801 163-058D THERMISTOR,03-07MX 7 OHM 20% 80/60
R903 0RD2200F609 220 OHM 1/6 W 5.00% TA52 TU101 6700VS0002F TUNER,TAEW-G002D W/W ALL IN W/S 09Z VE
R906 0RD1000F609 100 OHM 1/6 W 5% TA52 VD1111 164-003G VARISTOR,TVR621D14A THINKING 620V 10%
R907 0RD1000F609 100 OHM 1/6 W 5% TA52
R908 0RD1000F609 100 OHM 1/6 W 5% TA52

- 26 -

Downloaded from www.Manualslib.com manuals search engine

 P/NO: 3854VA0146A - S1
2004.4.16

Downloaded from www.Manualslib.com manuals search engine

 SVC. SHEET : 3854VA0146A-S

Downloaded from www.Manualslib.com manuals search engine

 Jun.,2004
P/NO : 3828VD0178U Printed in Korea

Downloaded from www.Manualslib.com manuals search engine