Product Information PI

INDUSTRIAL X-RAY TUBE

E7599

Toshiba X-ray Tube for Industrial Use

 The Toshiba X-ray tube E7599 is designed to

provide the load of 5mA at 300kV in pulse
voltage, self-rectified circuit under gas insulation
(SF6).

 It is suitable for portable X-ray units up to 300kV

for non-destructive inspection of metal casting
or metal welding.

 This tube has metal-ceramic sealed envelope

which results in mechanically strong and
compact sized structure.

General Data

Electrical:
Circuit:
High Voltage Generator ...................................................................... Self-rectified, Pulse Voltage
(Pulse Width 1ms, Duty Factor 0.16)
Grounding ............................................................................................................ Anode-grounded
Operating Tube Voltage ................................................................................................. 160 ~ 300 kV
Focal Spot .................................................................................................................. 2.5 ± 0.75 mm
Filament Current ......................................................................................................... Maximum 4.0 A

Mechanical:
Dimensions .................................................................................................... See dimensional outline
Overall Length ................................................................................................................... 196 mm
Maximum Diameter ........................................................................................................ φ 132 mm
Target:
Anode Angle ................................................................................................................. 22 degrees
Construction ....................................................................................................................... Tungsten
Inherent Filtration ..................................................................................................... 1.0 mm Beryllium
X-ray Coverage (Angle) ......................................................................... 1) φ 350 mm at SID 600 mm
Weight (Approx.) ........................................................................................................................ 4.1 kg

Note 1) More than 50% blackening of the film at center spot.

★The information contained herein is presented only as a guide for the applications of our products.
No Responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO.,LTD.(TETD) for any infringements of patents or other rights of the third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others.
★The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of
equipment incorporating this product.
E7599

Insulating Medium ............................................................................................... Insulation Gas (SF6)

Pressure ............................................................................................... 39.4 × 104 ~ 58.8 × 104 Pa
(4 ~ 6 kg / cm2 Gauge)
Gas Temperature ................................................................................................... Maximum 70℃
Cooling Method ................................................................... Forced air (External radiator is required)
Maximum 150℃ at anode top
Tube Holding ............................................................................. Hold anode flange (φ 132) uniformly
Mechanical Strength (Shock) .................................................................................... Maximum 200 G
(at upper holding condition)
Tube direction ............................................................................................................................... Free
Appearance, Finish ........................................................................................................... No Painting

Absolute Maximum and Minimum Ratings

(At any time, these values must not be exceeded.)

Maximum Tube Voltage .................................................................................... 1) 300 kV (1ms-pulse)

Maximum Inverse Voltage ........................................................................................................ 150 kV
Minimum Tube Voltage ........................................................................................ 160 kV (1ms-pulse)
Maximum Tube Current .............................................................................................. 5 mA (Average)
Maximum Input Energy .................................................................................................. 300 kV, 5 mA
10 min ON - 10min OFF
Filament Frequency Limits ........................................................... DC or AC (Sine Wave) 0 ~ 20 kHz
Maximum Filament Current ............................................................ See filament characteristics chart
4.0 A
Maximum Filament Voltage (At 4.0 A) ....................................................................................... 5 ~ 7 V
Maximum Anode Temperature ........................................................ 2) Maximum 150℃ at anode top

Note 1) 300kV is absolute maximum rating, tube voltage should not be exceeded 300 kV
when line voltage to the generator fluctuates.
2) Anode temperature is judged by the thermo paint around the X-ray port.
(See dimensional outline)

Environmental Limits

Shipping and Storage Limits:

Temperature ................................................................................................................. -40 ~ 70 ℃
Humidity .......................................................................................................................... 10 ~ 90 %
（No condensation）
Atmospheric Pressure ............................................................................................... 50 ~ 106 kPa

-2-
 E7599

Filament Characteristics2000-10-10
E7599

1 ms pulse
Filament Chart
Focal Spot: 2.5 mm
10

8
FILAMENT VOLTAGE [V]

0
3.0 3.2 3.4 3.6 3.8 4.0

FILAMENT CURRENT [A]

Emission Characteristics
2000-10-10
E7599
1Emission
ms pulse
Focal Spot: 2.5 mm

300

280
5mA (Average)
TUBE VOLTAGE [kV]

260

240

220

200

180

160
3.2 3.3 3.4 3.5 3.6 3.7

FILAMENT CURRENT [A]

-3-
E7599

Dimensional Outline
Unit mm

２２．５ φ１１６
°
Ｆｉｌａｍｅｎｔ
４－φ８　Ｈｏｌｅｓ　　　 φ９８
ｏｎ　φ３０　Ｃｉｒｃｌｅ
φ８０
Ｆｉｌａｍｅｎｔ　Ｃａｔｈｏｄｅ
φ７６

２６
１１

１０
３０

８－φ３．５　Ｈｏｌｅｓ
４－Ｍ３　Ｂｏｌｔｓ　　　　

１９６±５
ｏｎ　φ６６　Ｃｉｒｃｌｅ
２－φ３．５　Ｈｏｌｅｓ

１２
４
Ａ
φ１５

７４±０．５
Ａ－Ｓｅｃｔｉｏｎ

Ａｎｏｄｅ
Ｍ３　６　Ｄｅｅｐ
３１
７

φ４６±０．１
２．４ ±０．０５
１２．０ ±０．２

＋０．２５ －０．１
Ｔｈｅｒｍｏ　ｐａｉｎｔｉｎｇ　（１５６℃）
３．２ 　０ φ９８－０．２ （Ａｔ　ｔｗｏ　ｐｏｉｎｔｓ）
φ１２０ ±０．２
φ１３２±０．２ Ｍ８　１２　Ｄｅｅｐ
φ１３２ ±０．２

Ｏ－Ｒｉｎｇ　Ｓｅａｌ　Ｓｕｒｆａｃｅ ３０°
±０ ．５゜
Ｏ－Ｒｉｎｇ　ＪＩＳＢ２４０１Ｇ１２０
６－Ｍ５　６　Ｄｅｅｐ
３
０
°
±
０
．
５
゜
ＴＯＳＨＩＢＡ
Ｅ７５９９

３－Ｍ３　６　Ｄｅｅｐ

Ｔｙｐｅ　Ｎａｍｅ φ
１
１
０
±
０
．
２

：Ｄｉｒｅｃｔｉｏｎ　ｏｆ　Ｍａｉｎ　Ｘ－ｒａｙ

-4-
 E7599

OVERSEAS SUBSIDIARIES AND AFFILIATES

EU REPRESENTATIVE
・TOSHIBA ELECTRONICS EUROPE GMBH
HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (0) 211-5296-107 FAX +49 (0) 211-5296-402

For Sales & Technical Services, please contact the following representative:

・TOSHIBA ELECTRONICS EUROPE GMBH

HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (0) 211-5296-107 FAX +49 (0) 211-5296-402

・TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.

2150 EAST LAKE COOK ROAD, SUITE 310
BUFFALO GROVE, ILLINOIS 60089 U.S.A.
PHONE +1 (847) 484-2400 FAX +1 (847) 541-7287

・TOSHIBA ELECTRON DEVICES &

MATERIALS TRADING (SHANGHAI) CO., LTD. (TEMS)
RM1606, SH-PLAZA,
No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 200001, CHINA
PHONE +86 (21) 6361-0077 FAX +86 (21) 6351-5760

Sales & Marketing Department

1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-8550, JAPAN
PHONE : +81-287-26-6666 FAX : +81-287-26-6060
http://www.toshiba-tetd.co.jp/

Toshiba Electron Tubes & Devices Co., Ltd. meets Toshiba Electron Tubes & Devices Co., Ltd. meets
the Environmental Management System Standard, internationally recognized Standards for Quality
ISO14001. Management System ISO9001, ISO13485.