Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    Unisonic Technologies Co., LTD: DC To DC Converter Controller

    Uploaded by

    Abel Rodriguez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Unisonic Technologies Co., LTD: DC To DC Converter Controller

    Uploaded by

    Abel Rodriguez
    54 views10 pages

    Original Title

    MC34063A

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views10 pages

    Unisonic Technologies Co., LTD: DC To DC Converter Controller

    Uploaded by

    Abel Rodriguez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 10

    UNISONIC TECHNOLOGIES CO.

    , LTD
    MC34063A LINEAR INTEGRATED CIRCUIT

    DC TO DC CONVERTER
    CONTROLLER

    „ DESCRIPTION
    The UTC MC34063A is a monolithic regulator subsystem,
    intended for use as DC to DC converter. This device contains a
    temperature compensated band gap reference, a duty-cycle
    control oscillator, driver and high current output switch. It can be
    used for step down, step-up or inverting switching regulators as
    well as for series pass regulators.
    „ FEATURES
    * Operation from 3.0V to 40V.
    * Short circuit current limiting.
    * Low standby current. Lead-free: MC34063AL
    * Output switch current of 1.5A without external transistors. Halogen-free: MC34063AG
    * Frequency of operation from 100Hz to 100kHz.
    * Step-up, step-down or inverting switch regulators.

    „ ORDERING INFORMATION
    Ordering Number
    Package Packing
    Normal Lead Free Halogen Free
    MC34063A-D08-T MC34063AL-D08-T MC34063AG-D08-T DIP-8 Tube
    MC34063A-S08-R MC34063AL-S08-R MC34063AG-S08-R SOP-8 Tape Reel

    www.unisonic.com.tw 1 of 10

    Copyright © 2008 Unisonic Technologies Co., Ltd QW-R103-008,H


    MC34063A LINEAR INTEGRATED CIRCUIT

    „ PIN CONFIGURATION

    „ PIN DESCRIPTION
    PIN NO PIN NAME I/O DESCRIPTION
    1 Switch Collector I Internal Darlington pairs TI collector
    2 Switch Emitter O Internal Darlington pairs TI emitter
    3 Timing Capacitor The value of selected capacitor controls the internal oscillator run rate
    4 GND
    Comparator Inverting Inverting input of comparator which can set & initiate the Darlington pairs
    5 I
    Input output switch
    6 VCC
    Current sense input to monitor the voltage drop across an external
    7 IPEAK Sense I
    resistor placed in series with VCC
    8 Driver Collector I Internal Darlington pairs TI collector

    UNISONIC TECHNOLOGIES CO., LTD 2 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT

    „ BLOCK DIAGRAM

    T2 S
    Switch Collector 1 Q 8 Drive Collector
    R
    T1 D

    Switch Emitter 2 C 7 IPEAK Sense


    Is
    A CT
    OSCILLATOR
    Timing Capacitor 3 6 Vcc

    COMP.
    GND 4 1.25VREF 5 Comparator Inverting
    B Input

    UNISONIC TECHNOLOGIES CO., LTD 3 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT

    „ ABSOLUTE MAXIMUM RATINGS (Ta=25°C )


    PARAMETER SYMBOL RATINGS UNIT
    Supply Voltage VCC 40 V
    Comparator Input Voltage Range VIN(COMP) -0.3 ~ +40 V
    Switch Collector Voltage VC(SW) 40 V
    Switch Emitter Voltage VE(SW) 40 V
    Switch Collector to Emitter Voltage VCE(SW) 40 V
    Driver Collector Voltage VC(DR) 40 V
    Switch Current ISW 1.5 A
    DIP-8 1250
    Power Dissipation (Ta=25°C) PD mW
    SOP-8 625
    Junction Temperature TJ +150 °C
    Operating Temperature TOPR 0 ~ +70 °C
    Storage Temperature TSTG -65 ~ +150 °C
    Note: Absolute maximum ratings are those values beyond which the device which the device could be permanently
    damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
    „ THERMAL DATA
    PARAMETER SYMBOL RATINGS UNIT
    DIP-8 100
    Junction-to-Ambient θJA ℃/W
    SOP-8 160

    „ ELECTRICAL CHARACTERISTICS (VCC=5.0V, Ta=0~+70°C, unless otherwise specified.)


    PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
    Oscillator
    Charging Current ICHG VCC=5 to 40V, Ta=25°C 22 31 42 μA
    Discharging Current IDISCHG VCC=5 to 40V, Ta=25°C 140 190 260 μA
    Oscillator Amplitude VOSC Ta=25°C 0.5 V
    Discharge to Charge Current Ratio K V7=VCC, Ta=25°C 5.2 6.1 7.5
    Current limit Sense Voltage VSENSE ICHG=IDISCHG, Ta=25°C 250 300 350 mV
    Output Switch
    Saturation Voltage 1(Note) VCE(SAT)1 ISW=1.0A, VC(DRIVER)=VC(SW) 0.95 1.3 V
    Saturation Voltage 2(Note) VCE(SAT)2 ISW=1.0A, VC(DRIVER)=50mA 0.45 0.7 V
    DC Current Gain(Note) GI (DC) ISW=1.0A, VCE=5.0V, Ta=25°C 50 180
    Collector Off State Current(Note) IC(OFF) VCE=40.0V, Ta=25°C 0.01 100 μA
    Comparator
    Threshold Voltage VTHD 1.21 1.24 1.29 V
    Threshold Voltage Line Regulation VTHD VCC=3 ~ 40V 2.0 5.0 mV
    Input Bias Current II(BIAS) VIN=0V 50 400 nA
    Total Device
    VCC=5~40V, CT=0.001
    Supply Current ICC 2.7 4.0 mA
    V7=VCC, VC>VTHD, Pin2=GND
    Note: Output switch tests are performed under pulsed conditions to minimize power dissipation.

    UNISONIC TECHNOLOGIES CO., LTD 4 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT
    „ STEP-UP CONVERTER

    170μH

    8 1
    180
    S Q Q2
    R Q1
    7 2
    1N5819
    IPK
    CT
    RSC 0.22 OSC
    3
    6 VCC
    VIN12V CT
    +
    100
    + 1.25V
    - Comp. REF REG 1500pF
    5 4

    1.0μH
    R2
    VOUT
    VOUT
    47k 28V/175mA
    + +
    R1 2.2k 330 CO 100

    Optional Filter

    Test Conditions Results


    Line Regulation VIN = 8.0V ~ 16V, IOUT = 175mA 30mV = ±0.05%
    Load Regulation VIN = 12V, IOUT = 75mA ~ 175mA 10mV = ±0.017%
    Output Ripple VIN = 12V, IOUT = 175mA 400mVp-p
    Efficiency VIN = 12V, IOUT = 175mA 87.7%
    Output Ripple With Optional Filter VIN = 12V, IOUT = 175mA 40mVp-p

    UNISONIC TECHNOLOGIES CO., LTD 5 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT
    „ STEP-DOWN CONVERTER(Cont.)

    Test Conditions Results


    Line Regulation VIN = 15V ~ 25V, IOUT = 500mA 12mV = ±0.12%
    Load Regulation VIN = 25V, IOUT = 50mA ~ 500mA 3.0mV = ±0.03%
    Output Ripple VIN = 25V, IOUT = 500mA 120mVp-p
    Short Circuit Current VIN = 25V, RL = 0.1Ω 1.1A
    Efficiency VIN = 25V, IOUT = 500mA 83.7%
    Output Ripple With Optional Filter VIN = 25V, IOUT = 500mA 40mVp-p

    UNISONIC TECHNOLOGIES CO., LTD 6 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT
    „ VOLTAGE INVERTING CONVERTER

    Test Conditions Results


    Line Regulation VIN = 4.5V ~ 6.0V, IOUT = 100mA 3.0mV = ±0.012%
    Load Regulation VIN = 5.0V, IOUT = 10mA ~ 100mA 0.022V = ±0.09%
    Output Ripple VIN = 5.0V, IOUT = 100mA 500mVp-p
    Short Circuit Current VIN = 5.0V, RL = 0.1Ω 910mA
    Efficiency VIN = 5.0V, IOUT = 100mA 62.2%
    Output Ripple With Optional Filter VIN = 5.0V, IOUT = 100mA 70mVp-p

    UNISONIC TECHNOLOGIES CO., LTD 7 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT
    „ EXTERNAL CURRENT BOOST CONNECTIONS FOR IC PEAK GREATER THAN 1.5A

    UNISONIC TECHNOLOGIES CO., LTD 8 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT
    „ TYPICAL CHARACTERISTICS

    UNISONIC TECHNOLOGIES CO., LTD 9 of 10


    www.unisonic.com.tw QW-R103-008,H
    MC34063A LINEAR INTEGRATED CIRCUIT

    „ DESIGN FORMULA TABLE


    CALCULATION STEP-DOWN STEP-UP VOLTAGE-INVERTING
    tON VOUT + VF
    tOFF VIN - VCE(SAT)

    (tON+tOFF)MAX

    CT 4x10-5 tON 4x10-5 tON 4x10-5 tON

    ISW 2IOUT(MAX)

    RS 0.3/ISW 0.3/ISW 0.3/ISW

    L(MIN)
    IOUT tON
    CO VRIPPLE(P-P)

    VCE(SAT) - Saturation voltage of the output switch.


    VF - Forward voltage drop of the ringback rectifier.
    The following power supply characteristics must be chosen:
    VIN - Nominal input voltage.
    VOUT - Desired output voltage, VOUT =1.25(1+R2/R1)
    IOUT - Desired output current.
    FMIN - Minimum desired output switching frequency at the selected values for VIN and IOUT.
    VRIPPLE(P-P) - Desired peak-to-peak output ripple voltage. In practice, the calculated value will need to be increased
    due to the capacitor equivalent series resistance and board layout. The ripple voltage should be kept
    to a low value since it will directly effect the line and load regulation.

    UTC assumes no responsibility for equipment failures that result from using products at values that
    exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
    other parameters) listed in products specifications of any and all UTC products described or contained
    herein. UTC products are not designed for use in life support appliances, devices or systems where
    malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
    whole or in part is prohibited without the prior written consent of the copyright owner. The information
    presented in this document does not form part of any quotation or contract, is believed to be accurate
    and reliable and may be changed without notice.

    UNISONIC TECHNOLOGIES CO., LTD 10 of 10


    www.unisonic.com.tw QW-R103-008,H

    You might also like