Eval Exam Part 2 Fluid May 2021 Discussion
Eval Exam Part 2 Fluid May 2021 Discussion
Eval Exam Part 2 Fluid May 2021 Discussion
Situation 19: A solid sphere of diameter 1 m and average mass density of 750
kg/m3 is completely submerged in a tank filled with water. It is held in place by a
string attached to the bottom of the tank, as shown. The mass distribution inside
the sphere is non-uniform, so the center of mass lies at a distance 0.50R from the
geometric center. Suppose that the sphere is attached rigidly to a massless
horizontal rod of length 0.65m and negligible volume oriented along the line
formed by the center of mass and the geometric center of the sphere, as shown.
The rod is attached on the side of the sphere nearer the center of mass, and the far
end of the rod is attached to a fixed pivot.
64. Which of the following most nearly gives the buoyant force acting on the
sphere?
a. 6.12 kN c. 7.05 kN
b. 5.14 kN d. 4.97 kN
65. Which of the following most nearly gives the tension in the string that is
needed to hold the sphere in place?
a. 1.93 kN c. 2.08 kN
b. 3.15 kN d. 2.12 kN
10. A closed cylindrical tank having a radius of 0.60 m and a height of 4 m is full of
water under a pressure of 196.20 kPa. The wall of the tank is 5 mm thick. The tank
is rotated about its axis at 200 rpm.
131. Which of the following most nearly gives the distance of the top edge from
the water surface?
a. 7.88 m c. 10.88 m
b. 6.38 m d. 9.38 m
132. Which of the following most nearly gives the distance of the center of
pressure from the water surface?
a. 12.46 m c. 10.96 m
b. 9.46 m d. 7.96 m
133. Which of the following most nearly gives the total hydrostatic pressure on
one side of the plate?
Situation 37: The figure is shown below. Analyze it as per meter strip.
120. Calculate the minimum volume of the concrete block needed to keep the
gate closed. Unit weight of concrete = 23.6 kN/m³.
a. 0.2217 m³ c. 0.4210 m³
b. 0.3794 m³ d. 0.5952 m³
"An open tank, 1.82 m square, weighs 3425 N and contains 0.91 m of water. It is
acted upon by an unbalanced force of 10400 N parallel to a pair of sides. What is
the force acting on the side with the greatest depth?"
FLUID 1
Maam situational ba maam ang tanungan sa fluids n hydro or isang tanong isang
sagot???
Private reply
Question from anonymous user
DismissPublish
Anonymous
2/24/2021 8:52 AM
Pwede rin po ma’am diba para di na magcconvert, cancel all 9.81 para ang lalabas
na unit eh in kN/m^2 na lang hehe
Private reply
Question from anonymous user
FLUID 2
Ma'am hindi po ba yung Hbar sa number 28 is from top of the tank going to half of
0.9225m?
Private reply
Question from anonymous user
DismissPublish
Anonymous
2/26/2021 10:31 AM
Mam, kelan po masasabing malaki yung tank kaya magzezero yung velocity?
Private reply
Question from anonymous user
DismissPublish
Anonymous
2/26/2021 10:35 AM
Mam, hindi po ba 1Hp=746 watts?
Private reply
Question from anonymous user
DismissPublish
Anonymous
2/26/2021 10:36 AM
hindi po ba sadyang mag eequal yung sa 2nd way ng pagchecheck? same po kasi na
unit wt x Vol remained ang ginamit sa F bottom
FLUIDS 3
FLUIDS 4