Unit I: Physical World and Measurement 10 Periods

Chapter–1: Physical World

Physics-scope and excitement; nature of physical laws; Physics, technology

and society.

Chapter–2: Units and Measurements

Need for measurement: Units of measurement; systems of units; SI units,

fundamental and derived units. Length, mass and time measurements;
accuracy and precision of measuring instruments; errors in measurement;
significant figures.

Dimensions of physical quantities, dimensional analysis and its applications.

Unit II: Kinematics 24 Periods

Chapter–3: Motion in a Straight Line

Frame of reference, Motion in a straight line: Position-time graph, speed and

velocity.

Elementary concepts of differentiation and integration for describing motion,

uniform and non- uniform motion, average speed and instantaneous velocity,
uniformly accelerated motion, velocity - time and position-time graphs.

Relations for uniformly accelerated motion (graphical treatment).

Chapter–4: Motion in a Plane

Scalar and vector quantities; position and displacement vectors, general

vectors and their notations; equality of vectors, multiplication of vectors by a
real number; addition and subtraction of vectors, relative velocity, Unit vector;
resolution of a vector in a plane, rectangular components, Scalar and Vector
product of vectors.

Motion in a plane, cases of uniform velocity and uniform acceleration-

projectile motion, uniform circular motion.
Unit III: Laws of Motion 14 Periods

Chapter–5: Laws of Motion

Intuitive concept of force, Inertia, Newton's first law of motion; momentum

and Newton's second law of motion; impulse; Newton's third law of motion.

Law of conservation of linear momentum and its applications.

Equilibrium of concurrent forces, Static and kinetic friction, laws of friction,

rolling friction, lubrication.

Dynamics of uniform circular motion: Centripetal force, examples of circular

motion (vehicle on a level circular road, vehicle on a banked road).

Unit IV: Work, Energy and Power 12 Periods

Chapter–6: Work, Engery and Power

Work done by a constant force and a variable force; kinetic energy, work-
energy theorem, power.

Notion of potential energy, potential energy of a spring, conservative forces:

conservation of mechanical energy (kinetic and potential energies); non-
conservative forces: motion in a vertical circle; elastic and inelastic collisions
in one and two dimensions.

Unit V: Motion of System of Particles and Rigid Body 18 Periods

Chapter–7: System of Particles and Rotational Motion

Centre of mass of a two-particle system, momentum conservation and centre of

mass motion. Centre of mass of a rigid body; centre of mass of a uniform rod.
Moment of a force, torque, angular momentum, law of conservation of
angular momentum and its applications.

Equilibrium of rigid bodies, rigid body rotation and equations of rotational

motion, comparison of linear and rotational motions.

Moment of inertia, radius of gyration, values of moments of inertia for simple

geometrical objects (no derivation). Statement of parallel and perpendicular
axes theorems and their applications.
Unit VI: Gravitation 12 Periods

Chapter–8: Gravitation

Kepler's laws of planetary motion, universal law of gravitation. Acceleration

due to gravity and its variation with altitude and depth.

Gravitational potential energy and gravitational potential, escape velocity,

orbital velocity of a satellite, Geo-stationary satellites.

Unit VII: Properties of Bulk Matter 24 Periods

Chapter–9: Mechanical Properties of Solids

Elastic behaviour, Stress-strain relationship, Hooke's law, Young's modulus,

bulk modulus, shear modulus of rigidity, Poisson's ratio; elastic energy.

Chapter–10: Mechanical Properties of Fluids

Pressure due to a fluid column; Pascal's law and its applications (hydraulic lift
and hydraulic brakes), effect of gravity on fluid pressure.

Viscosity, Stokes' law, terminal velocity, streamline and turbulent flow, critical
velocity, Bernoulli's theorem and its applications.

Surface energy and surface tension, angle of contact, excess of pressure

across a curved surface, application of surface tension ideas to drops, bubbles
and capillary rise.

Chapter–11: Thermal Properties of Matter

Heat, temperature, thermal expansion; thermal expansion of solids, liquids

and gases, anomalous expansion of water; specific heat capacity; Cp, Cv -
calorimetry; change of state - latent heat capacity.

Heat transfer-conduction, convection and radiation, thermal conductivity,

qualitative ideas of Blackbody radiation, Wein's displacement Law, Stefan's
law, Greenhouse effect.
Unit VIII: Thermodynamics 12 Periods
Chapter–12: Thermodynamics

Thermal equilibrium and definition of temperature (zeroth law of

thermodynamics), heat, work and internal energy. First law of thermodynamics,
isothermal and adiabatic processes.

Second law of thermodynamics: reversible and irreversible processes, Heat

engine and refrigerator.

Unit IX: Behaviour of Perfect Gases and Kinetic Theory of Gases 08 Periods

Chapter–13: Kinetic Theory

Equation of state of a perfect gas, work done in compressing a gas.

Kinetic theory of gases - assumptions, concept of pressure. Kinetic

interpretation of temperature; rms speed of gas molecules; degrees of
freedom, law of equi-partition of energy (statement only) and application to
specific heat capacities of gases; concept of mean free path, Avogadro's
number.

Unit X: Oscillations and Waves 26 Periods

Chapter–14: Oscillations
Periodic motion - time period, frequency, displacement as a function of time,
periodic functions.

Simple harmonic motion (S.H.M) and its equation; phase; oscillations of a

loaded spring- restoring force and force constant; energy in S.H.M. Kinetic
and potential energies; simple pendulum derivation of expression for its time
period. Free, forced and damped oscillations (qualitative ideas only),
resonance.

Chapter–15: Waves
Wave motion: Transverse and longitudinal waves, speed of travelling wave,
displacement relation for a progressive wave, principle of superposition of
waves, reflection of waves, standing waves in strings and organ pipes,
fundamental mode and harmonics, Beats, Doppler effect.
PRACTICALS Total Periods: 60

The record, to be submitted by the students, at the time of their annual examination, has
to include:

• Record of at least 12 Experiments [with 6 from each section], to be performed by the

students.

• Record of at least 6 Activities [with 3 each from section A and section B], to be
performed by the students.

• Report of the project to be carried out by the students.

EVALUATION SCHEME

Time Allowed: Three hours Max. Marks: 30

Two experiments one from each section 7+7
Marks
Practical record (experiment and activities) 5 Marks
One activity from any section 3 Marks
Investigatory Project 3 Marks
Viva on experiments, activities and project 5 Marks
Total 30 Marks

SECTION–A
Experiments

1. To measure diameter of a small spherical/cylindrical body and to measure internal

diameter and depth of a given beaker/calorimeter using Vernier Callipers and hence
find its volume.

2. To measure diameter of a given wire and thickness of a given sheet using screw
gauge.

3. To determine volume of an irregular lamina using screw gauge.

4. To determine radius of curvature of a given spherical surface by a spherometer.

5. To determine the mass of two different objects using a beam balance.

6. To find the weight of a given body using parallelogram law of vectors.

7. Using a simple pendulum, plot its L-T2 graph and use it to find the effective length of
second's pendulum.

8. To study variation of time period of a simple pendulum of a given length by taking

bobs of same size but different masses and interpret the result.

9. To study the relationship between force of limiting friction and normal reaction and to
find the co- efficient of friction between a block and a horizontal surface.

10. To find the downward force, along an inclined plane, acting on a roller due to
gravitational pull of the earth and study its relationship with the angle of inclination θ
by plotting graph between force and sinθ.

Activities

1. To make a paper scale of given least count, e.g., 0.2cm, 0.5 cm.

2. To determine mass of a given body using a metre scale by principle of moments.

3. To plot a graph for a given set of data, with proper choice of scales and error bars.

4. To measure the force of limiting friction for rolling of a roller on a horizontal plane.

5. To study the variation in range of a projectile with angle of projection.

6. To study the conservation of energy of a ball rolling down on an inclined plane (using
a double inclined plane).

7. To study dissipation of energy of a simple pendulum by plotting a graph between

square of amplitude and time.
 SECTION–B
Experiments
1. To determine Young's modulus of elasticity of the material of a given wire.

2. To find the force constant of a helical spring by plotting a graph between load and
extension.

3. To study the variation in volume with pressure for a sample of air at constant
temperature by plotting graphs between P and V, and between P and 1/V.

4. To determine the surface tension of water by capillary rise method.

5. To determine the coefficient of viscosity of a given viscous liquid by measuring

terminal velocity of a given spherical body.

6. To study the relationship between the temperature of a hot body and time by plotting a
cooling curve.

7. To determine specific heat capacity of a given solid by method of mixtures.

8. To study the relation between frequency and length of a given wire under constant
tension using sonometer.

9. To study the relation between the length of a given wire and tension for constant
frequency using sonometer.

10. To find the speed of sound in air at room temperature using a resonance tube by two
resonance positions.

Activities

1. To observe change of state and plot a cooling curve for molten wax.
2. To observe and explain the effect of heating on a bi-metallic strip.
3. To note the change in level of liquid in a container on heating and interpret the
observations.
4. To study the effect of detergent on surface tension of water by observing capillary rise.
5. To study the factors affecting the rate of loss of heat of a liquid.
6. To study the effect of load on depression of a suitably clamped metre scale loaded at
(i) its end (ii) in the middle.

7. To observe the decrease in pressure with increase in velocity of a fluid.

 Practical Examination for Visually Impaired
Students Class XI

Note: Same Evaluation scheme and general guidelines for visually impaired students as
given for Class XII may be followed.

A. Items for Identification/Familiarity of the apparatus for assessment in

practicals (All experiments)

Spherical ball, Cylindrical objects, vernier calipers, beaker, calorimeter, Screw gauge,
wire, Beam balance, spring balance, weight box, gram and milligram weights,
forceps, Parallelogram law of vectors apparatus, pulleys and pans used in the same
‘weights’ used, Bob and string used in a simple pendulum, meter scale, split cork,
suspension arrangement, stop clock/stop watch, Helical spring, suspension
arrangement used, weights, arrangement used for measuring extension, Sonometer,
Wedges, pan and pulley used in it, ‘weights’ Tuning Fork, Meter scale, Beam
balance, Weight box, gram and milligram weights, forceps, Resonance Tube, Tuning
Fork, Meter scale, Flask/Beaker used for adding water.

B. List of Practicals

1. To measure diameter of a small spherical/cylindrical body using vernier calipers.

2. To measure the internal diameter and depth of a given beaker/calorimeter using
vernier calipers and hence find its volume.
3. To measure diameter of given wire using screw gauge.
4. To measure thickness of a given sheet using screw gauge.
5. To determine the mass of a given object using a beam balance.
6. To find the weight of given body using the parallelogram law of vectors.
7. Using a simple pendulum plot L-T and L-T2 graphs. Hence find the effective
length of second’s pendulum using appropriate length values.
8. To find the force constant of given helical spring by plotting a graph between
load and extension.
 9. (i) To study the relation between frequency and length of a given wire under
constant tension using a sonometer.
(ii) To study the relation between the length of a given wire and tension, for
constant frequency, using a sonometer.
10. To find the speed of sound in air, at room temperature, using a resonance tube,
by observing the two resonance positions.

Note: The above practicals may be carried out in an experiential manner rather than
recording observations.

Prescribed Books:

1. Physics Part-I, Textbook for Class XI, Published by NCERT

2. Physics Part-II, Textbook for Class XI, Published by NCERT
3. Laboratory Manual of Physics, Class XI Published by NCERT
4. The list of other related books and manuals brought out by NCERT (consider
multimedia also).