Professional Documents
Culture Documents
Rashid Raza Ansari
Rashid Raza Ansari
Mechanical Engineer
Camp, Pune, India (411001)
Gender: Male Marital Status: Single
Passport No: R3599846 Nationality: Indian
(+91)-8668406957 (+974)-33288563
rashidraza717@gmail.com
CAREER OBJECTIVE
To be professionally associated with your steamed organization with as objective to accept the challenges and
utilize my education and efforts more meaningfully in the sphere of professionals
PROFESSIONAL SUMMARY
Mechanical engineer with 3 years of experience in MEP services with knowledge of HVAC chilled water-
cooling system, District cooling system, VRF, PAC, firefighting, plumbing. Successfully completed Msheireb
Downtown Project Doha, Qatar. Ongoing site is Barclays Pune, India.
HIGHLIGHTS
Site execution as per approved drawing, specification and client’s requirements
Installation experience in HVAC units at site with all accessories
HVAC system, District cooling system, Smoke extract systems, VRF, VAV, PAC system
Centralized HVAC system – AHU, FCU, MAU, Chillers & cooling Towers
Sizing & selection of mechanical HVAC equipment & material, heat load calculations
Sizing & layout of ductwork & HVAC chilled water piping systems energy analysis
Basics of Small power and lighting system, lightning protection system, telephone system
Basic of Fire Safety System, Building Management system (BMS)
Plumbing, drainage, firefighting and fire safety
Calculation of water, gas, sanitary/sewer and storm loads for utility coordination
QA/ QC, testing, commissioning, site close-outs
MEP standard i.e. ASHRAE, SMACNA, QCS, NFPA, Client standard
Project management & planning & coordination
WORK EXPERIENCE
Company -3: M/s KDBS Pvt Ltd. Pune, India
March 2019 – Present Designation: Project Engineer
Project: Barclays Pune LTS Client: Barclays
Project Management: CBRE South Asia Pvt Ltd MEP Consultant: Interics Design Consultant
Billing, material approval, technical data sheet, site documentation, coordination to vendors for
manpower supply, shop drawing approval, material indentation and arrangement.
To attend meeting for weekly, monthly plan schedule and progress report to management team and
client, coordination to MEP consulting team for inspections.
To read drawing for execution, supervision, to raise RFI for erection, material, mechanical works.
Testing and commissioning of HVAC services and warranty, maintenance, certification, site close-outs.
QA/QC works, checking of HVAC works per MEP standard ASHREA, SMACNA.
Review of all mechanical works, building works as per shop drawing and mechanical design standard
before forwarding to consultant for approval.
Report to project manager on daily basis.
Company -2: M/s Arabian MEP Contracting W.L.L Doha, Qatar
August 2017 – Feb 2019 – 1 year 8 Months duration
Designation: Project Engineer Main Contractor: Multiplex Brookfield
Project: Msheireb Downtown Doha Client: Msheireb Properties
Project Management: Time Qatar MEP Consultant: CEG International
Management, supervision, installation, follow-ups of mechanical works firefighting system and HVAC
at site.
To read drawing for execution, preparing materials take off, coordinating with procurement department /
stores to arrange materials at site.
Effectively allotment of material to supervisors.
To avoid wastage of material and effective utilization of man power.
Review of all mechanical works, building works as per IFC/ shop drawing and mechanical design
standard before forwarding to consultant for approval.
Proper site execution as approved shop drawing and in case of any changes need to red marking of
design as per site constrain.
To raise RFI for inspection of works, materials inspection to client/consultant to get approval.
To do testing and commissioning of all mechanical services and site close-outs.
Report to construction manager on daily basis.
Coordinating at site for electrical, civil, architecture, management team for timely execution of work.
Company -1: M/s Varun Tools & Components Pune, India
April 2016 - March 2017 – 1 year duration
Designation: Engineering Trainee
Design and analysis of Lathe & CNC & EDM machine tools and parameters to get desired properties of
finished product.
GI sheet metal cutting, fabrication, quality inspection.
To ensure the finished product characteristics, surface finish, MRR as quality control.
Report to site construction manager.
As trainee engineer coordination with other departments design, quality control QA/QC, manufacturing
department.
EDUCATION
SOFTWARE PROFICIENCY
PERSONAL TRAIT
Hardworking, honest, team player, problem solving ability, good communication skill
Management & financial skill, quick learner, creative, co-operative and keen observer
Team work as well as independently work and team leadership, multi-tasking