323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...

Página 1 de 21

Shutdown SIS

Previous Screen

Product:  EXCAVATOR
Model:  323D L EXCAVATOR PBE
Configuration: 323D L Excavator PBE00001-UP (MACHINE) POWERED BY
C6.4 Engine

Systems Operation
308D, 311D, 312D, 314D, 315D, 319D, 320D, 321D, 323D, 324D, 325D, 328D, 329D, 330D,
336D, 345C, 345D, 365C, 374D, 385C, M325D, UNDERCARRIAGE and W345C Excavators,
323D MHPU, 324D MHPU, 325D MHPU, 330D MHPU, 345C MHPU and 385C MHPU Mobile
Hydraulic Power Units and 365C L OEM OEM Monitoring System
Media Number -RENR8068-14 Publication Date -01/11/2009 Date Updated -19/11/2009

i02652518

Calibration Mode
SMCS - 7490

S/N - A3R1-UP

S/N - A6F1-UP

S/N - A8F1-UP

S/N - A9F1-UP

S/N - AWN1-UP

S/N - AZP1-UP

S/N - B6H1-UP

S/N - B6N1-UP

S/N - BFC1-UP

S/N - BTK1-UP

S/N - BWW1-UP

S/N - BWY1-UP

S/N - BXK1-UP

S/N - BYC1-UP

S/N - BYJ1-UP

S/N - BYM1-UP

S/N - BYS1-UP

S/N - BZF1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 2 de 21

S/N - BZH1-UP

S/N - BZN1-UP

S/N - BZP1-UP

S/N - C3N1-UP

S/N - C4H1-UP

S/N - C5K1-UP

S/N - C7K1-UP

S/N - C8L1-UP

S/N - C9M1-UP

S/N - CJM1-UP

S/N - CJN1-UP

S/N - CJX1-UP

S/N - CLA1-UP

S/N - CWG1-UP

S/N - CXY1-UP

S/N - CYD1-UP

S/N - CYW1-UP

S/N - CYZ1-UP

S/N - CZF1-UP

S/N - D3D1-UP

S/N - D3P1-UP

S/N - D3S1-UP

S/N - DAY1-UP

S/N - DBH1-UP

S/N - DCJ1-UP

S/N - DDW1-UP

S/N - DFP1-UP

S/N - DHE1-UP

S/N - DHK1-UP

S/N - DHP1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 3 de 21

S/N - DJF1-UP

S/N - DKW1-UP

S/N - DLP1-UP

S/N - DTS1-UP

S/N - DTZ1-UP

S/N - DWR1-UP

S/N - E4K1-UP

S/N - EAH1-UP

S/N - EAW1-UP

S/N - EAX1-UP

S/N - EBM1-UP

S/N - EBY1-UP

S/N - EDC1-UP

S/N - EDX1-UP

S/N - EEH1-UP

S/N - EJC1-UP

S/N - EJT1-UP

S/N - ELS1-UP

S/N - ERK1-UP

S/N - ERN1-UP

S/N - ESD1-UP

S/N - FAL1-UP

S/N - FFK1-UP

S/N - FMH1-UP

S/N - FPC1-UP

S/N - FXK1-UP

S/N - FYC1-UP

S/N - GBC1-UP

S/N - GBH1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 4 de 21

S/N - GBR1-UP

S/N - GBT1-UP

S/N - GCL1-UP

S/N - GDP1-UP

S/N - GGE1-UP

S/N - GJR1-UP

S/N - GKL1-UP

S/N - GKS1-UP

S/N - GMX1-UP

S/N - GPB1-UP

S/N - GPH1-UP

S/N - GSC1-UP

S/N - GTN1-UP

S/N - GYR1-UP

S/N - H3D1-UP

S/N - H3K1-UP

S/N - H3N1-UP

S/N - HAS1-UP

S/N - HCW1-UP

S/N - HJC1-UP

S/N - HJX1-UP

S/N - J2F1-UP

S/N - JAR1-UP

S/N - JAT1-UP

S/N - JBC1-UP

S/N - JBF1-UP

S/N - JBT1-UP

S/N - JFZ1-UP

S/N - JGK1-UP

S/N - JGS1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 5 de 21

S/N - JGZ1-UP

S/N - JHJ1-UP

S/N - JJG1-UP

S/N - JJM1-UP

S/N - JKN1-UP

S/N - JKR1-UP

S/N - JLG1-UP

S/N - JLP1-UP

S/N - JLS1-UP

S/N - JWR1-UP

S/N - JZR1-UP

S/N - KBD1-UP

S/N - KBE1-UP

S/N - KCD1-UP

S/N - KDG1-UP

S/N - KDJ1-UP

S/N - KES1-UP

S/N - KFH1-UP

S/N - KFM1-UP

S/N - KGF1-UP

S/N - KJR1-UP

S/N - KKT1-UP

S/N - KLM1-UP

S/N - KTF1-UP

S/N - L2K1-UP

S/N - LAB1-UP

S/N - LAL1-UP

S/N - LEM1-UP

S/N - LFL1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 6 de 21

S/N - LKA1-UP

S/N - LKY1-UP

S/N - LMG1-UP

S/N - LRM1-UP

S/N - LYS1-UP

S/N - M2R1-UP

S/N - M3M1-UP

S/N - M4T1-UP

S/N - MCH1-UP

S/N - MCL1-UP

S/N - MDC1-UP

S/N - MDE1-UP

S/N - MDT1-UP

S/N - MEY1-UP

S/N - MGG1-UP

S/N - MKR1-UP

S/N - MLK1-UP

S/N - MNB1-UP

S/N - MND1-UP

S/N - MPL1-UP

S/N - MTE1-UP

S/N - MWP1-UP

S/N - MYG1-UP

S/N - MYP1-UP

S/N - NAC1-UP

S/N - NAS1-UP

S/N - NBD1-UP

S/N - NCM1-UP

S/N - NDE1-UP

S/N - NEG1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 7 de 21

S/N - NES1-UP

S/N - NLM1-UP

S/N - NRF1-UP

S/N - PAL1-UP

S/N - PAP1-UP

S/N - PAS1-UP

S/N - PAX1-UP

S/N - PBD1-UP

S/N - PBE1-UP

S/N - PBM1-UP

S/N - PBT1-UP

S/N - PCM1-UP

S/N - PCX1-UP

S/N - PDP1-UP

S/N - PEL1-UP

S/N - PGW1-UP

S/N - PHH1-UP

S/N - PHX1-UP

S/N - PJA1-UP

S/N - PJW1-UP

S/N - PKE1-UP

S/N - PNJ1-UP

S/N - PPN1-UP

S/N - PRF1-UP

S/N - PYT1-UP

S/N - R2D1-UP

S/N - R5K1-UP

S/N - RAC1-UP

S/N - RAE1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 8 de 21

S/N - RAJ1-UP

S/N - RAS1-UP

S/N - RBT1-UP

S/N - RDC1-UP

S/N - RFN1-UP

S/N - RGD1-UP

S/N - RGG1-UP

S/N - RHL1-UP

S/N - RJK1-UP

S/N - RKF1-UP

S/N - RSK1-UP

S/N - S5M1-UP

S/N - SBP1-UP

S/N - SBZ1-UP

S/N - SCN1-UP

S/N - SCR1-UP

S/N - SCY1-UP

S/N - SDC1-UP

S/N - SED1-UP

S/N - SKA1-UP

S/N - SPC1-UP

S/N - SPN1-UP

S/N - SRT1-UP

S/N - SSZ1-UP

S/N - SYM1-UP

S/N - T2D1-UP

S/N - T2S1-UP

S/N - T2Y1-UP

S/N - TAE1-UP

S/N - TAJ1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB... Página 9 de 21

S/N - TBA1-UP

S/N - TDG1-UP

S/N - TDH1-UP

S/N - TFA1-UP

S/N - TGY1-UP

S/N - THJ1-UP

S/N - TLE1-UP

S/N - TPM1-UP

S/N - TRH1-UP

S/N - TSN1-UP

S/N - TXN1-UP

S/N - W3K1-UP

S/N - WBJ1-UP

S/N - WBN1-UP

S/N - WDE1-UP

S/N - WDK1-UP

S/N - WET1-UP

S/N - WFD1-UP

S/N - WGC1-UP

S/N - WLN1-UP

S/N - WLT1-UP

S/N - WNE1-UP

S/N - WRK1-UP

S/N - XCK1-UP

S/N - XDB1-UP

S/N - XGK1-UP

S/N - XHR1-UP

S/N - YDS1-UP

S/N - YEE1-UP

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 10 de 21

S/N - YFW1-UP

S/N - YSD1-UP

S/N - ZCA1-UP

S/N - ZGB1-UP

S/N - ZGZ1-UP

S/N - ZMF1-UP

The "CALIBRATIONS" menu allows the user to perform calibrations

Illustration 1 g01152977
(8) Up key

(9) Right key

(10) Home key

(11) Main menu key

(12) Left key

(13) Down key

(14) Cancel key or back key

(15) OK key

The "CALIBRATIONS" menu option is entered by selecting "CALIBRATIONS" from the "SERVICE"
menu. Press the up key (8) or the down key (13) until "CALIBRATIONS" is highlighted in order to select
this option. Then press the "OK" key (15) .

Note: Refer to Systems Operation, "Service Mode" for instructions to get to the "SERVICE" menu.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 11 de 21

Illustration 2 g01213605

The following is a list of calibrations that can be performed with the monitoring system.

Control Valves

 A1 Valve Extend

 A1 Valve Retract

 A2 Valve Extend

 A2 Valve Retract

 A3 Valve Extend

 A3 Valve Retract

Relief Valves

 Atch # 1 RLF Valve

 Atch # 2RLF Valve

PS Pres Valve

Flow Limit Valve

Lever/Pedal/Atch

 Mod L Thumbwheel

 Mod R Thumbwheel

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 12 de 21

 Left Atch Pedal

 Right Atch Pedal

Engine Speed

Fan Speed

Control Valves

Illustration 3 g01213089

Perform the following steps in order to calibrate the Control Valves:

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. Control Valves

6. Select the desired control valve from the menu.

When a blue number is displayed, perform the operation that corresponds with the step in table 2 for the
number that is displayed.

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 13 de 21

calibrating, restart the process of calibrating.

Note: Refer to the Hydraulic Schematic for your machine model in order to locate the port for the pressure
gauge.

Table 1

Step
Operation

Connect the pressure gauge to the pressure tap corresponding to the selected valve. Then press the
1
"OK" key (15) in order to go to the next step.
2 Release all controls then press the "OK" key (15) in order to go to the next step.
Hold the thumbwheel in the forward position while pressing the "OK" key (15) in order to go to
3
the next step.
Hold the thumbwheel in the forward position while tuning the pressure to the target value. Press
the right key (9) or the left key (12) in order to increase or decrease the pressure shown on the
4
pressure gauge. When you finish tuning the pressure to the target value, press the "OK" key (15)
to go to the next step.
5 Repeat step 3.
6 Repeat step 4 for the new target value.
7 Repeat step 2.
8 End of the calibration.

Relief Valves

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 14 de 21

Illustration 4 g01213209

Perform the following steps in order to calibrate the Relief Valves:

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. Relief Valves

6. Select the desired relief valve from the menu.

When a blue number is displayed, perform the operation that corresponds with the step in table 2 for the
number that is displayed.

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of
calibrating, restart the process of calibrating.

Note: Refer to the Hydraulic Schematic for your machine model in order to locate the port for the pressure
gauge.

Table 2

Step
Operation

Connect the pressure gauge to the pressure tap corresponding to the selected valve. Then press the
1
"OK" key (15) in order to go to the next step.
Hold the thumbwheel in the forward position while pressing the "OK" key (15) in order to go to
2
the next step.
Hold the thumbwheel in the forward position while tuning the pressure to the target value. Press
the right key (9) or the left key (12) in order to increase or decrease the pressure shown on the
3
pressure gauge. When you finish tuning the pressure to the target value, press the "OK" key (15)
to go to the next step.
4 Repeat step 2.
5 Repeat step 3 for the new target value.
6 Release all controls then press the "OK" key (15) in order to go to the next step.
7 End of the calibration.

PS Pres Valve

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 15 de 21

Illustration 5 g01213258

Perform the following steps in order to calibrate the PS Pres Valve:

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. PS Pres Valve

When a blue number is displayed, perform the operation that corresponds with the step in table 2 for the
number that is displayed.

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of
calibrating, restart the process of calibrating.

Note: Refer to the Hydraulic Schematic for your machine model in order to locate the port for the pressure
gauge.

Table 3

Step
Operation

Connect the pressure gauge to the pump pressure tap. Then press the "OK" key (15) in order to go
1
to the next step.

2 Press the right key (9) or the left key (12) in order to increase or decrease the current value. Tune
the pressure to the target. When you finish adjusting then press the "OK" key (15) to go to the

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 16 de 21

next step.
3 Repeat step 2 for the new target value.
4 End of the calibration.

Flow Limit Valve

Illustration 6 g01213306

Perform the following steps in order to calibrate the Flow Limit Valve:

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. Flow Limit Valve

6. Make the desired selection from the Flow Limit Valve screen.

When a blue number is displayed, perform the operation that corresponds with the step in table 2 for the
number that is displayed.

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of
calibrating, restart the process of calibrating.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 17 de 21

Note: Refer to the Hydraulic Schematic for your machine model in order to locate the port for the pressure
gauge.

Table 4

Step
Operation

Connect the pressure gauge to the appropriate pressure tap. Then press the "OK" key (15) in order
1
to go to the next step.
2 Move stick to full in position then press the "OK" key (15) in order to go to the next step.
3 Hold stick in the full in position then press the "OK" key (15) in order to go to the next step.
Hold the stick in the full in position while tuning the pressure to the target value. Press the right
key (9) or the left key (12) in order to increase or decrease the pressure shown on the pressure
4
gauge. When you finish tuning the pressure to the target value, press the "OK" key (15) to go to
the next step.
5 Repeat step 3.
6 Repeat step 4 for the new target value.
7 End of the calibration.

Lever/Pedal/Atch

Illustration 7 g01213413

Perform the following steps in order to calibrate the right and left thumbwheels:

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 18 de 21

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. Lever/Pedal/Atch

6. Select the deisired thumbwheel from the Lever/Pedal/Atch screen.

When a blue number is displayed, perform the operation that corresponds with the step in table 5 for the
number that is displayed.

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of
calibrating, restart the process of calibrating.

Table 5

Step
Operation

1 Press the "OK" key (15) in order to go to the next step.

2 Release all controls then press the "OK" key (15) in order to go to the next step.
Move the thumbwheel to the FORWARD position then the BACKWARD position. Release the
3
thumbwheel then press the "OK" key (15) in order to go to the next step.
4 Press the "OK" key (15) in order to go to the next step.
5 End of the calibration.

Engine Speed

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 19 de 21

Illustration 8 g01213420

Perform the following steps in order to calibrate the Engine Speed:

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. Engine Speed

When a blue number is displayed, perform the operation that corresponds with the step in table 5 for the
number that is displayed.

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of
calibrating, restart the process of calibrating.

Table 6

Step Operation
1 Press the "OK" key (15) in order to go to the next step.
2 Press the "OK" key (15).
3 -
4 -
5 -

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 20 de 21

6 -
7 -
8 -
9 -
10 -
11 End of the calibration.

Fan Speed

Illustration 9 g01213541

Perform the following steps in order to calibrate the Fan Speed:

1. Main Menu

2. Service

3. Enter the "SERVICE" password.

4. Calibrations

5. Fan Speed

When a blue number is displayed, perform the operation that corresponds with the step in table 7 for the
number that is displayed.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017

323D L Excavator PBE00001-UP (MACHINE) POWERED BY C6.4 Engine(SE... Página 21 de 21

Note: It is possible for an error to occur when you are calibrating. If an error occurs during the process of
calibrating, restart the process of calibrating.

Table 7

Step
Operation

Connect the speed sensor to the fan. Then press the "OK" key (15) in order to go to the next step.
1

Press the right key (9) or the left key (12) in order to increase or decrease the current value. Tune
2 the fan speed to the target. When you finish tuning the fan speed to the target value, press the
"OK" key (15).
3 Repeat step 2 for the new target value.
4 End of the calibration.

Copyright 1993 - 2017 Caterpillar Inc. Tue Dec 19 09:52:50 UTC-0400 2017
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis ... 19/12/2017