1 2 3 4 5 6 7 8

All cited standards refer to the version valid at creation date of this drawing

A A

32 TEETH, 14mm PITCH

GATES POLYCHAIN TYPE 56,0
A PER DRAWING 10322190
8,0 40,00

142,60 P.D.

B 12,0 B
(D10)
0,10 A

MARK FINISHED 1,6

10,098
10,040

PART NO. HERE

distributing and/or communicating to the public and/or third parties without the written consent of the respective Primetals
The copyright, other intellectual property rights and the exclusive right of use of the present document (and its content)

2X 1,0 X 45°
remains with the Primetals Technologies Legal Entity being party to the respective order. Copying, adapting, reproducing,

Technologies Legal Entity is strictly forbidden. Any infringement will be prosecuted to full extent of the applicable law.

(E7)
1,6

120,00
119,50

115,21
114,71

51,50
51,00

35,075
35,050
R1,0
1,6

4X

2X
MAX

C A C

0,40
2X R 0,25
139,80 ±0,15
0,10 A

A B
D
38,50 3,40
3,10
SECTION A-A D
38,30
2,0

Total Qty - 4 Nos

Material - UNS F33100 / ASTM A536 65-45-12
The content of the present document shall be treated strictly confidential and shall not be disclosed to the public

respective order. In particular, the present document shall not be used for any purpose other than for executing
or to any third party without the written consent of the Primetals Technologies Legal Entity being party to the

1,0 X 45°

DETAIL B A ECN NO.

E SCALE 2:1 E
Revision Modification Contents Date Made by Checked by

TYPICAL (2) PLACES

T E C H N O L O G I E S

Condition Sub Supplier

Similar To:
10309015
Description 1 Date Name

SPROCKET Made by
09/23/2015 SAE
Description 2 Checked by
TBT
Approved by
TBT
Description 3 Material
UNS F33100
Mass
4.7 kg
Description 4 Security Level

Status

F Description 5 Document Type F

the respective order.

DIMENSIONING ACCORDING TO ASME Y14.5M:1994

UNLESS OTHERWISE SPECIFIED:
ENVELOPE PRINCIPLE APPLIES.
ALL DIMENSIONS ARE IN MILLIMETERS 10322190
Material No. Version Scale
1:1 Size
A1
Sheet No. of Sheets
BREAK ALL SHARP EDGES
COUNTERSINK ALL TAPPED HOLES TO MAJOR
MMS40073
Drwg. No. Revision
REQUIREMENTS OF
MACHINED SURFACE FINISH 6,3 (ASME Y14.36M)
THE ABOVE APPLY 10633326 A
1 2 3 4 5 6 7 8 PAPERSIZE: A2 (594 x 420)
SW-PRIME-RMF-ISO-A2-METRIC 06/26/2015