L-Series Audible Visible Accessories: General
L-Series Audible Visible Accessories: General
L-Series Audible Visible Accessories: General
L-series
Audible Visible
Accessories
Audio/Visual Devices
General
L-Series devices offer a wide range of Audible Visible (AV)
accessories to meet a variety of application requirements.
The MP120KL Mounting Plate is designed to use 120 VAC to
power SpectrAlert® Advance horns, strobes, horn strobes,
chimes, and chime strobes.
Color Lens Attachments install easily on any L-Series strobe
devices to provide distinctive visual signaling.
Bezel Kits enable installers to easily turn any L-Series Fire or
Plain device into a device that meets ECS/MNS requirements.
Bezel kits are available for all varieties and footprints of L-
Series products and come in FIRE, ALERT, EVAC, AGENT,
FUEGO, FOGO, and Plain options making customization easy. AV Accessories Family: Mouting Plate,
Universal Trim Rings for wall and ceiling mount devices allow Red Fire Bezel, and Colored Lenses
for additional space within the backbox.
L-Series Surface Mount Back Boxes are the best solution in MP120K Specifications
locations where you have a hard surface to mount to.
120 VAC mounting plate model MP120KL shall be listed to UL
The Sync•Circuit Module synchronizes L-Series strobes at 1 464 for fire-protective signaling systems. The mounting plate
Hz and horns and chimes at temporal 3 over a single pair of shall power a two-wire L-Series horn, strobe, horn strobe,
wires. Patented module technology also allows the silencing of chime or chime strobe from a 120 VAC supply converted to
horns or chimes on horn strobe and chime strobe models over nominal 24 V FWR. For indoor applications, the mounting
a pair of wires. See the Sync•Circuit Datasheet for more infor- plate shall be installed in a 4x4x21/8 inch junction box.
mation.
MK120KL COMPATIBILITY
Features MP120KL may be used with any of the following products at all
horn and strobe settings: P2RL, P2WL, P2RL-P, P2WL-P,
MP120KL MOUNTING PLATE P2RL-SP, P2WL-SP, PC2RL, PC2WL, SRL, SWL, SRL-P,
SWL-P, SRL-SP, SWL-CLR-ALERT, SWL-ALERT, SCRL,
• Designed for both indoor and outdoor use
SCWL, SCWL-CLR-ALERT, HRL, HWL, CHRL, CHWL,
• Plug-in design eliminates ground faults CHSRL, CHSWL, CHSCRL, CHSCWL.
• Power supply that converts 120 VAC to nominal 24 V FWR
MP120K PHYSICAL/OPERATING SPECIFICATIONS
• Compatible with all two-wire L-Series devices
• Operating Temperature: –40°F to 151°F (–40°C to 66°C).
COLOR LENS ATTACHMENTS
• Humidity Range: 10 to 93% non-condensing (indoor prod-
• Easily turns any device into a strobe for ECS/MNS events: ucts).
severe weather, toxic gases, sprinkler activation and more • Nominal Voltage: Regulated 120 VAC
• Outdoor rated from -35°F to 151°F • Operating Voltage Range: 96–132 VAC
• Wall- or ceiling-mount lenses available • Current Draw From AC Line: 150 mA max.
• UL 1638 listed
BEZEL KITS L-Series Bezels Specifications
• Easily turn a Fire or Plain device into a device to meet ECS/ The System Sensor L-Series bezels are for installation with
MNS requirements strobes, horns, chimes, horn strobes, chime strobes, and
speaker strobes. Bezels are offered in red and white for both
• Bezel kits available for strobes, horns, chimes, horn wall and ceiling devices. Available in FIRE, ALERT, EVAC,
strobes, chime strobes and speaker strobes AGENT, Plain (no marking), FUEGO, and FOGO. Operating
• Bezels options with FIRE, ALERT, EVAC, AGENT, PLAIN, temperature shall be -40°F to 151°F.
FUEGO, FOGO printing
• For use with L-Series devices only Colored Lens Attachments
• Operating temperature -40°F to 151°F
ARCHITECTURAL/ENGINEERING SPECIFICATIONS
The System Sensor L-Series colored lens attachments shall
be approved for fire-protective service as listed in UL 1638.
The lens attachments shall only be used with plain (no “FIRE”
print) System Sensor strobe devices or in conjunction with a
non-fire printed bezel. The lens shall mount to any wall- or ceil-
ing-mount strobes and shall be rated from -35°F to 151°F.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com