Saudi Aramco 5645-2-ENG (11/2010)

SAUDI ARABIAN OIL COMPANY

THIS REVISION IS NOT TO BE USED FOR

CONSTRUCTION UNTIL CERTIFIED AND
SAFETY INSTRUCTION SHEET FOR CROSS COUNTRY PIPELINE - CRITICAL PIPING
1 PIPELINE NAME 2 START POINT 3 END POINT 4 SERVICE 5 VALVE OPER. DIAGRAM 6 YR. BUILT

BLOWDOWN PROD. /RELEIF LINES BLOWDOWN HEADER KHUFF GAS N.A. *

ISSUED FOR CONSTRUCTION

DATED
7 EQUIPMENT NAME 2"-BD-0123/0124/0125-15SD0P EQUIPMENT NAME

8 LOCATION (@ Km.) HRDH GAS WELL-1219 LOCATION (@ Km.)

REVISION DESCRIPTION

9 SECTION 2"-BD-0126-15SD0P SECTION

10 EQUIP. CATEGORY EQUIP. CATEGORY

11 SIZE in. 2 in. SIZE in.

12 W.T. in. 0.218 W.T. in.

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
13 MATERIAL 316L SS MATERIAL
PIPE

PIPE
14 WELD TYPE SMLS WELD TYPE
07/31/2016

15 SPEC. / GR. A312 TP316L SPEC. / GR.

DATE

10-01277-6497

16 COATING TYPE - COATING TYPE

JOB ORDER/EWO NO.

EQUIPMENT DATA

17 RATING Match to pipe RATING

FITTING

FITTING
18 FACING Match to pipe FACING
REV. NO.

00

19 MATERIAL 316L SS MATERIAL

20 SPEC. / GR. A403 WP316L SPEC. / GR.

21 REMARKS REMARKS
BY/DATE
OTHER

OPERATIONS/DATE

22 FLANGE RATING 1500 FLANGE RATING

07/31/2016
AMR

23 FLANGE FACING RJ FLANGE FACING

24 FLANGE MAT'L SPECIFICATION A182 F316L FLANGE MAT'L SPECIFICATION

25 M.A.O.P. 2473 PSIG, LIMITED BY: ANSI 1500# SS316L FLANGE M.A.O.P. PSIG, LIMITED BY:
REVIEW FOR KEY DRAWINGS
REQUIRED (SAUDI ARAMCO)

26 DESIGN FACTOR 0.72 DESIGN FACTOR

27 DESIGN TEMPERATURE: 230 oF DESIGN TEMPERATURE: (°F) oF

28 TEST PRESSURE 4131 PSIG TEST PRESSURE PSIG

OPERATING LIMITS
CONST. AGENCY/DATE

INITIAL INITIAL
PRESSURE 29 TEST DATE * PRESSURE TEST DATE
TEST TEST
07/31/2016

30 LIMITED BY PIPEWALL LIMITED BY

SAH

31 TEST PRESSURE * PSIG TEST PRESSURE PSIG

REVALIDATION 32 TEST DATE * REVALIDATION TEST DATE

✘
33 LIMITED BY * LIMITED BY

34 SYSTEM M.A.O.P. 2000 PSIG SYSTEM M.A.O.P. PSIG

35 LIMITED BY DESIGN CONDITION LIMITED BY

36 SAFETY VALVE SET PRESS. 4338 PZV SAFETY VALVE SET PRESS. PZV
CERTIFIED/DATE

DES THK @ 37 PIPE SIZE 2 DES THK @ PIPE SIZE

07/31/2016

in. in. in. in. in. in.

RBS

SYSTEM MAOP 38 PIPE Tm 0.132 in. in. in. SYSTEM MAOP PIPE Tm in. in. in.
DESIGN CERTIFICATION

& DES TEMP 39 PIPE Tca 0.086 in. in. in. & DES TEMP PIPE Tca in. in. in.
(DESIGN AGENCY)

40 OSI DATA POINTS OSI DATA POINTS

OSI DATA POINT INFO.

SEQ. DATE WT(in). DATE WT(in). DATE WT(in). SEQ. DATE WT(in). DATE WT(in). DATE WT(in).

1 1
ENGG./DATE

07/31/2016

2 2
EST

3 3

4 4

5 5

6 6

41 REMARKS REMARKS

* TO BE FILLED OUT BY CONSTRUCTION DURING THE TEST. * TO BE FILLED OUT BY CONSTRUCTION DURING THE TEST.

** SAFETY VALVE SET PRESSURE SHALL BE FOR STRENGTH TEST ONLY. ** SAFETY VALVE SET PRESSURE SHALL BE FOR STRENGTH TEST ONLY.
IS COVERED, FOR ALL APPROVAL

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

10-01277-6497-017
REVISION VALIDATION

42 REFERENCE DWGS REFERENCE DWGS

DRAWING COMPLETION CERTIFICATE NO.

ANSI B31.8/B16.5, SAES-L-125, SAES-L-105, SAES-L-410, SAES-L-133, SAES-L-450

PIPING AND INSTRUMENT DIAGRAM .:BA-660049.006

HYDROSTATIC TEST DIAGRAM .: BA-660055.006

00
THIS REVISION NO.

SIS FOR 2"-BD-0123/0124/0125/0126-15SD0P DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO

TIE-IN HRDH-1219 GAS WELL TO HRDH-698 SIS

1
HARADH GAS GATHERING MANIFOLD D83 A BE-660054 OF 00
HARADH SAUDI ARABIA
2
EKRD/5645-2-1110.XLS

150 RF