Fault Code 2964 Intake Manifold Temperature High - Data Valid But Above Normal Operational Range - Least Severe Level
Fault Code 2964 Intake Manifold Temperature High - Data Valid But Above Normal Operational Range - Least Severe Level
Page 1 of 3
Circuit Description
The intake manifold air temperature sensor monitors intake manifold air temperature and
passes information to the electronic control module (ECM) through the engine harness. If
the intake manifold air temperature becomes too high, it will cause a derate condition.
Component Location
The intake manifold air temperature sensor is located in the air intake manifold. Refer to
Procedure 100-002 for a detailed component location view.
Shop Talk
The intake manifold air temperature sensor measures the temperature of the charge-air as
it passes through the intake manifold. Possible causes of this fault code include:
12:35:03 2007-07-20
Intake Manifold Temperature High - Data Valid but Above Normal Operational Rang... Page 2 of 3
Troubleshooting Steps
STEPS SPECIFICATIONS
STEP 1. Check the fault codes.
STEP 1A. Check for Fault Code Active or inactive counts of Fault
2964. Codes 2964?
Conditions
Action
Active or inactive counts of Fault Codes Active or inactive counts of Fault Codes
2964? 2964?
YES NO
Refer to the Intake Manifold Air No Repair
Temperature Above Specification symptom
tree in Troubleshooting and Repair Manual,
ISC, QSC8.3, ISL and QSL9 Engines,
Bulletin 4021418.
Copyright© 2005
12:35:03 2007-07-20
Intake Manifold Temperature High - Data Valid but Above Normal Operational Rang... Page 3 of 3
Cummins, Inc.
All rights reserved
12:35:03 2007-07-20