Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 77 views

    Eastern Visayas State University Ormoc City Campus: Engineering Department

    Uploaded by

    Christian Jim Polleros
    This document describes the design of a two-storey residential building. Concrete self-weight is 23.5 KN/m^3. Dead and live loads are 11.72 KN/m^2 and 6 KN/m^2 respectively. A rectangular beam section is designed with dimensions 450mm x 1050mm and reinforcement of 8 bars of 32mm diameter. Column sections of 500mm x 500mm are designed to resist bending moments up to 522.58 KN-m.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Eastern Visayas State University Ormoc City Campus: Engineering Department

    Uploaded by

    Christian Jim Polleros
    77 views14 pages
    This document describes the design of a two-storey residential building. Concrete self-weight is 23.5 KN/m^3. Dead and live loads are 11.72 KN/m^2 and 6 KN/m^2 respectively. A rectangular beam section is designed with dimensions 450mm x 1050mm and reinforcement of 8 bars of 32mm diameter. Column sections of 500mm x 500mm are designed to resist bending moments up to 522.58 KN-m.

    Original Title

    STRUCTURAL DESIGN

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the design of a two-storey residential building. Concrete self-weight is 23.5 KN/m^3. Dead and live loads are 11.72 KN/m^2 and 6 KN/m^2 respectively. A rectangular beam section is designed with dimensions 450mm x 1050mm and reinforcement of 8 bars of 32mm diameter. Column sections of 500mm x 500mm are designed to resist bending moments up to 522.58 KN-m.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    77 views14 pages

    Eastern Visayas State University Ormoc City Campus: Engineering Department

    Uploaded by

    Christian Jim Polleros
    This document describes the design of a two-storey residential building. Concrete self-weight is 23.5 KN/m^3. Dead and live loads are 11.72 KN/m^2 and 6 KN/m^2 respectively. A rectangular beam section is designed with dimensions 450mm x 1050mm and reinforcement of 8 bars of 32mm diameter. Column sections of 500mm x 500mm are designed to resist bending moments up to 522.58 KN-m.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 14

    EASTERN VISAYAS STATE UNIVERSITY ORMOC CITY

    CAMPUS

    ENGINEERING DEPARTMENT

    CE 324

    PRINCIPLES OF REINFORCED/ PRESTRESSED

    CONCRETE

    (Second Semester, AY 2020-2021)

    DESIGN OF A TWO STOREY RESIDENTIAL BUILDING

    Submitted by:

    MARILOU N. PINO

    CE-3A

    Submitted to:

    ENGR. PHOEBE S. LANZADERAS

    Instructor

    LOCATION
    CORNER 1, EVALDEZ AND JUAN STREET, BRGY. DOLORES ORMOC CITY

    PERSPECTIVES

    ISOMETRIC VIEW
    FRONT VIEW
    REAR VIEW

    LEFT VIEW RIGHT VIEW


    FLOOR PLAN

    BEAM LAYOUT
    DEAD LOAD
    *SELF WEIGHT OF STRUCTURE
    Concrete Weight 23.5 KN/M^3

    *ROOF CONSTRUCTION
    Light-frame wood roof with wood structural
    panel sheathing and ½ inch gypsum board ceiling
    0.72 KN/M^2
    with asphalt shingle roofing
    *FLOOR CONSTRUCTION
    Light-frame 2x12 wood floor with ¾ inch 0.47KN/M^2
    wood structural panel sheathing and ½ inch gypsum
    board ceiling without ½ inch gypsum board, with
    carpet, vinyl or similar floor covering
    *WALL CONSTRUCTION
    Light-frame 2x4 wood wall with ½ inch wood 0.29 KN/M^2
    structural panel sheathing and ½ inch gypsum board
    finish for 2x6

    Interior partition walls (2x4 with ½ inch


    gypsum board applied to both sides) 0.29 KN/M^2
    *FOUNDATION CONSTRUCTION
    6 inch thick wall
    >masonry (solid or full grout)
    2.87 KN/M^2
    >concrete
    3.59 KN/M^2

    6 inch x 12 inches concrete footing


    3.49 KN/M^2

    LIVE LOAD

    *ROOF LOAD
    Slope ≥ 4:12 0.72 kpa
    *FLOOR LOAD
    Bedroom Areas 1.44 Kpa

    Other Areas 1.92 Kpa

    Stairs 1.92 Kpa

    WIND LOAD

    Design Wind Speed


    Assume: 300 Kph ( Brgy. Dolores Ormoc City)

    SEISMIC LOAD
    Minimum uniform live load = 5.28 kpa

    V = SDS/(R/Ie) (W)

    Where:

    SDS = design spectral response acceleration in the short period range


    (0.5g) R = response modification factor (R =6.5, Ω = 3)

    W = effective seismic weight of the building, 20% of the roof snow is included where the ground
    snow load exceeds 1.44 Kpa

    Ie = 1.0 for residential building

    V = (0.5) / (6.5/1.0) (1.5206)

    V = 0.12

    DESIGN OF RECTANGULAR SECTION

    Given:

    DL = 8m (11.75 KN/m^2) = 94 KN/m


    LL = 8m (6kn/m^2) = 48 KN/m
    Unit weight of the concrete = 23.5
    KN/m^3 Assume: b =
    450mm p = ½

    pb l = 8m Fy =

    440 Mpa f’c =

    28 Mpa bar size

    = 32mm cc =

    40mm

    Solution:
    Assume beam weight to be 20%
    (DL+LL) Beam weight = 20% (94 + 48)
    = 28.4 KN/m Wu = 1.2DL + 1.6LL
    Wu = 1.2 (94 + 28.4) + 1.6 (48) = 247.2 KN/m
    Mu = WuL^2/8

    2
    Mu = ((247.2) (8 )) / 8 = 1977.6 KN-m
    Pb = 0.85 f’c β1/ fy (600/600+fy) =
    0.0265 P = ½ pb = ½ (0.0265) =
    0.01325
    Mu = φbd^2fyp (1-pfy/1.7f’c)

    6 2
    1977.6 x 10 = (0.90) (450) (d ) (440) (0.01325) (1 – 0.01325(440)/1.7(28))

    d = 976.96mm say 980mm

    Total depth: 980 + 40 +10 +32/2 = 1046mm say 1050mm


    Effective depth: 1050 – 40 -10 -32/2 = 984mm

    Use: 450x1050 d =
    984mm

    Actual wt. of beam = 23.5 (0.45) (1.05)


    Actual wt. of beam = 11.10 KN/m < 28.4 KN/m okay! As =
    2
    pbd = 0.01325 (450) (984) = 5867mm n = As/A =

    2
    5867/(π/4) (32 )) = 7.29 or 8 pcs of 32mmφ bars Check for
    spacing:

    b = 2cc + 6ds + 3db +3s


    450 = 2(40) + 6 (984) s + 3 (984) (450) + 3s
    450 >224 okay!
    2
    Check if φ Mn > Mu a = As fy /0.85f’cb = [(π/4) ((32 ) (8)] (440)/0.85(28) (450) =
    264mm c = a/β = 264/0.85 =310.59mm ξ t = (d-c/c) (0.003) = (984-310.59/310.59)

    2
    (0.003) = 0.0065 > 0.005 φ= 0.90 φ Mn = φ As fy (d-a/2) = 0.90(π/4 (32 ) (8))
    (440) (984-264/2) = 2170.7x10^6 KN-m
    2170 KN-m >1977.6 KN-m okay!

    Assume; 500mmx500mm column


    Wu = 1.2DL + 1.6LL

    Wu = 1.2(94) + 1.6(48)

    Wu = 189.6 KN/m

    @A

    Ln =1/2 (500 + 2000) (1/1000) = 1.25m

    2 2
    MA = WuLn /14 = 189.6(1.25) /14 = 21.16 KN-m
    @B
    Ln =1/2(2000-250) (1/1000) = 0.875m

    2 2
    MB = WuLn /11 = (189.6) (0.875) /11 = 13.19 KN-m
    @C

    Ln = ½ (1750+(4000 – 500) (1/1000) = 5.25m

    2 2
    Mc = WuLn /10 = (189.6) (5.25) /10 = 522.58 KN-m
    @F

    Ln = ½ (4000 – 500) (1/1000) = 1.75m

    2 2
    MF = WuLn /16 =189.6 (1.75) /16 = 36.29 KN-m

    Assume; 500mmx500mm column

    Wu = 1.2DL + 1.6LL

    Wu = 1.2(94) + 1.6(48)

    Wu = 189.6 KN/m

    @A
    Ln = ½ (500+3000) (1/1000) = 1.75m

    2 2
    MA = WuLn /14 = 189.6 (1.75) /14 = 41.48 KN-m
    @B
    Ln = ½ (3000– 250) (1/1000) = 1.38m

    2 2
    MB = WuLn /11 = 189.6 (1.38) / 11 = 32.82 KN-m
    @C
    Ln = ½ (3750 + (4000 – 500)) (1/1000) = 3.625m

    2 2
    Mc = WuLn /10 = 189.6 (3.625) /10 = 249.146 KN-m
    @F
    Ln = ½ (4000 – 500) (1/1000) = 1.75m
    MF = WuLn2/16 = 189.6 (1.75)²/16 = 36.29 KN –m

    Second Floor Beam

    SUMMARY
    Concrete weight = 23.5 KN/m^3 DLT
    = 11.72 KN/m^2

    LLT = 6 KN/m^2
    WL = 300 kph
    SL = 0.12 kpa
    Rectangular section design
    b = 450mm d = 980mm dT
    = 1050mm Ed = 984mm
    L = 8m
    Cc = 40mm
    Fy = 440 Mpa
    F’c = 28 Mpa
    P = ½ pb
    Actual weight of beam = 11.10 KN/m < 28.4 KN/m okay!
    8 pcs. of 32mm bars
    Spacing = 450 > 224 okay!
    Mn = 2170 KN–m > 19776.6 KN-m okay!

    Second Floor Beam

    LEFT / RIGHT BEAM


    Column: 500mm x 500mm Wu
    = 189.6 KN/m

    Ln (m) M (KN-m)

    @A 1.25 21.16

    @B 0.875 13.19

    @C 5.25 522.58

    @F 1.75 36.29

    FRONT / REAR / CENTER


    Column: 500mm x 500mm Wu
    = 189.6 KN/m

    Ln (m) M (KN-m)
    @A 1.75 41.48

    @B 1.38 32.82

    @C 3.625 249.146

    @F 1.75 36.29

    You might also like