5/1/2021 Word - Quick Guide - Tutorialspoint

Word - Quick Guide

Getting Started Word 2010

In this chapter, we will discuss how to get started with Word 2010. We will understand how to
start a Word 2010 application in simple steps. Assuming you have Microsoft Office 2010
installed in your PC, to start the Word application, follow these steps −

Step 1 − Click the Start button.

Step 2 − Click the All Programs option from the menu.

https://www.tutorialspoint.com/word/word_quick_guide.htm 1/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Search for Microsoft Office from the submenu and click it.

Step 4 − Search for Microsoft Word 2010 from the submenu and click it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 2/194
5/1/2021 Word - Quick Guide - Tutorialspoint

This will launch the Microsoft Word 2010 application and you will see the following window.

Explore Window in Word 2010

In this chapter, we will understand how to explore Window in Word 2010. Following is the basic
window which you get when you start the Word application. Let us understand the various
important parts of this window..

https://www.tutorialspoint.com/word/word_quick_guide.htm 3/194
5/1/2021 Word - Quick Guide - Tutorialspoint

File Tab

The File tab replaces the Office button from Word 2007. You can click it to check the Backstage
view. This is where you come when you need to open or save files, create new documents,
print a document, and do other file-related operations.

Quick Access Toolbar

This you will find just above the File tab. This is a convenient resting place for the
mostfrequently used commands in Word. You can customize this toolbar based on your comfort.

Ribbon

Ribbon contains commands organized in three components −

https://www.tutorialspoint.com/word/word_quick_guide.htm 4/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Tabs − These appear across the top of the Ribbon and contain groups of related
commands. Home, Insert, Page Layout are examples of ribbon tabs.

Groups − They organize related commands; each group name appears below the
group on the Ribbon. For example, group of commands related to fonts or group of
commands related to alignment, etc.
Commands − Commands appear within each group as mentioned above.

Title bar

This lies in the middle and at the top of the window. Title bar shows the program and document
titles.

Rulers

Word has two rulers - a horizontal ruler and a vertical ruler. The horizontal ruler appears just
beneath the Ribbon and is used to set margins and tab stops. The vertical ruler appears on the
left edge of the Word window and is used to gauge the vertical position of elements on the
page.

Help
The Help Icon can be used to get word related help anytime you like. This provides nice tutorial
on various subjects related to word.

Zoom Control

Zoom control lets you zoom in for a closer look at your text. The zoom control consists of a
slider that you can slide left or right to zoom in or out; you can click the + buttons to increase or
decrease the zoom factor.

View Buttons

The group of five buttons located to the left of the Zoom control, near the bottom of the screen,
lets you switch through the Word's various document views.
Print Layout view − This displays pages exactly as they will appear when printed.
Full Screen Reading view − This gives a full screen view of the document.

Web Layout view − This shows how a document appears when viewed by a Web
browser, such as Internet Explorer.
Outline view − This lets you work with outlines established using Word’s standard
heading styles.
Draft view − This formats text as it appears on the printed page with a few exceptions.
For example, headers and footers aren't shown. Most people prefer this mode.

Document Area

https://www.tutorialspoint.com/word/word_quick_guide.htm 5/194
5/1/2021 Word - Quick Guide - Tutorialspoint

This is the area where you type. The flashing vertical bar is called the insertion point and it
represents the location where text will appear when you type.

Status Bar

This displays the document information as well as the insertion point location. From left to right,
this bar contains the total number of pages and words in the document, language, etc.

You can configure the status bar by right-clicking anywhere on it and by selecting or deselecting
options from the provided list.

Dialog Box Launcher

This appears as very small arrow in the lower-right corner of many groups on the Ribbon.
Clicking this button opens a dialog box or task pane that provides more options about the group.

Backstage View in Word 2010

In this chapter, we will discuss the Backstage View in Word 2010. The Backstage view was
introduced in Word 2010. This acts as the central place for managing your documents. The
backstage view helps in creating new documents, saving and opening documents, printing and
sharing documents, and so on.

Getting to the Backstage View is easy: Just click the File tab, located in the upper-left corner of
the Word Ribbon. If you already do not have any opened document, then you will see a window
listing down all the recently opened documents as follows −

https://www.tutorialspoint.com/word/word_quick_guide.htm 6/194
5/1/2021 Word - Quick Guide - Tutorialspoint

If you already have an opened document, then it will display a window showing detail about the
opened document as shown below. Backstage view shows three columns when you select most
of the available options in the first column.

https://www.tutorialspoint.com/word/word_quick_guide.htm 7/194
5/1/2021 Word - Quick Guide - Tutorialspoint

The first column of the backstage view will have following options −

https://www.tutorialspoint.com/word/word_quick_guide.htm 8/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Option & Description

Save
1 If an existing document is opened, it will be saved as is, otherwise it will display a
dialogue box asking for the document name.

Save As
2 A dialogue box will be displayed asking for document name and document type, by
default it will save in word 2010 format with extension .docx.

Open
3
This option is used to open an existing word document.

Close
4
This option is used to close an open document.

Info
5
This option displays information about the opened document.

Recent
6
This option lists down all the recently opened documents

New
7
This option is used to open a new document.

Print
8
This option is used to print an open document.

Save & Send

9 This option will save an open document and will display options to send the document
using email, etc.

Help
10
This option is used to get the required help about Word 2010.

11 Options

https://www.tutorialspoint.com/word/word_quick_guide.htm 9/194
5/1/2021 Word - Quick Guide - Tutorialspoint

This option is used to set various option related to Word 2010.

Exit
12
Use this option to close the document and exit.

Document Information
When you click the Info option available in the first column, it displays the following information
in the second column of the backstage view −
Compatibility Mode − If the document is not a native Word 2007/2010 document, a
Convert button appears here, enabling you to easily update its format. Otherwise, this
category does not appear.
Permissions − You can use this option to protect your word document. You can set a
password so that nobody can open your document, or you can lock the document so
that nobody can edit your document.
Prepare for Sharing − This section highlights important information you should know
about your document before you send it to others, such as a record of the edits you
made as you developed the document.
Versions − If the document has been saved several times, you may be able to access
the previous versions of it from this section.

Document Properties
When you click the Info option available in the first column, it displays various properties in the
third column of the backstage view. These properties include the document size, the number of
pages in the document, the total number of words in the document, the name of the author etc.
You can also edit various properties by clicking on the property value and if the property is
editable, then it will display a text box where you can add your text like title, tags, comments,
Author.

Exit Backstage View

It is simple to exit from the Backstage View. Either click on the File tab or press the Esc button
on the keyboard to go back to the working mode of Word.

Entering Text - Microsoft Word 2010

In this chapter, let us discuss how to enter text with Microsoft Word 2010. Let us see how easy it
is to enter text in a Word document. We assume you know that when you start Word, it displays
a new document by default as shown below −

https://www.tutorialspoint.com/word/word_quick_guide.htm 10/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Document area is the area where you type your text. The flashing vertical bar is called the
insertion point and it represents the location where the text will appear when you type. keep the
cursor at the text insertion point and start typing the text. We typed only two words "Hello Word"
as shown below. The text appears to the left of the insertion point as you type −

https://www.tutorialspoint.com/word/word_quick_guide.htm 11/194
5/1/2021 Word - Quick Guide - Tutorialspoint

The following are the two important points that will help you while typing −
You do not need to press Enter to start a new line. As the insertion point reaches the
end of the line, Word automatically starts a new one. You will need to press Enter, to
add a new paragraph.
When you want to add more than one space between words, use the Tab key instead of
the spacebar. This way you can properly align text by using the proportional fonts.

Move Around in Word 2010

In this chapter, we will discuss how to move around in Word 2010. Word provides a number of
ways to move around a document using the mouse and the keyboard.
To begin with, let us create some sample text. To create a sample text, there is a short cut
available. Open a new document and type =rand() and press Enter. Word will create the
following content for you −

https://www.tutorialspoint.com/word/word_quick_guide.htm 12/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Moving with Mouse

You can easily move the insertion point by clicking in your text anywhere on the screen. There
may be instances when a document is big and you cannot see a place where you want to move.
Here, you will have to use the scroll bars, as shown in the following screenshot −

https://www.tutorialspoint.com/word/word_quick_guide.htm 13/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can scroll through your document by rolling your mouse wheel, which is equivalent to
clicking the up-arrow or down-arrow buttons in the scroll bar.

Moving with Scroll Bars

As shown in the above screenshot, there are two scroll bars: one for moving vertically within the
document, and one for moving horizontally. Using the vertical scroll bar, you may −
Move upward by one line by clicking the upward-pointing scroll arrow.
Move downward by one line by clicking the downward-pointing scroll arrow.
Move one next page, using the next page button (footnote).
Move one previous page, using the previous page button (footnote).

Use the Browse Object button to move through the document, going from one chosen
object to the next.

Moving with Keyboard

The following keyboard commands, used for moving around your document, also move the
insertion point −

https://www.tutorialspoint.com/word/word_quick_guide.htm 14/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Keystroke Where the Insertion Point Moves

Forward one character

Back one character

Up one line

Down one line

PageUp To the previous screen

PageDown To the next screen

Home To the beginning of the current line

End To the end of the current line

You can move word by word or paragraph by paragraph. You would have to hold down the Ctrl
key while pressing an arrow key, which moves the insertion point as described here −

Key Combination Where the Insertion Point Moves

Ctrl +
To the next word

Ctrl +
To the previous word

Ctrl +
To the start of the previous paragraph

Ctrl +
To the start of the next paragraph

Ctrl + PageUp To the previous browse object

Ctrl + PageDown To the next browse object

Ctrl + Home To the beginning of the document

Ctrl + End To the end of the document

Shift + F5 To the last place you changed in your document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 15/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Moving with Go To Command

Press the F5 key to use the Go To command. This will display a dialogue box where you will
have various options to reach to a particular page.

Normally, we use the page number, the line number or the section number to go directly to a
particular page and finally press the Go To button.

Save Document in Word 2010

In this chapter, we will discuss how to save a document in Word 2010.

Saving New Document

Once you are done with typing in your new Word document, it is time to save your document to
avoid losing work you have done on a Word document. Following are the steps to save an
edited Word document −

Step 1 − Click the File tab and select the Save As option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 16/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Select a folder where you will like to save the document, Enter the file name which you
want to give to your document and Select the Save As option, by default it is the .docx format.

https://www.tutorialspoint.com/word/word_quick_guide.htm 17/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Finally, click on the Save button and your document will be saved with the entered
name in the selected folder.

Saving New Changes

There may be an instance when you open an existing document and edit it partially or
completely, or an instance where you may like to save the changes in between editing of the
document. If you want to save this document with the same name, then you can use either of
the following simple options −

Just press the Ctrl + S keys to save the changes.

Optionally you can click on the floppy icon available at the top left corner and just above
the File tab. This option will also help you save the changes.

You can also use the third method to save the changes, which is the Save option
available just above the Save As option as shown in the above screenshot.
If your document is new and it was never saved so far, then with either of the three options,
Word will display a dialogue box to let you select a folder, and enter the document name as
explained in case of saving new document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 18/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Opening a Document in Word 2010

In this chapter, we will discuss how to open a document in Word 2010.

Opening New Document

A new, blank document always opens when you start Microsoft Word. Suppose you want to
start another new document while you are working on another document, or you closed an
already opened document and want to start a new document. Here are the steps to open a new
document −

Step 1 − Click the File tab and select the New option.

Step 2 − When you select the New option from the first column, it will display a list of templates
in the second column. Double-click on the Blank document; this is the first option in the
template list. We will discuss the other templates available in the list in the following chapters.

You should have your blank document as shown below. The document is now ready for you to
start typing your text.

https://www.tutorialspoint.com/word/word_quick_guide.htm 19/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can use a shortcut to open a blank document anytime. Try using the Ctrl + N keys and you
will see a new blank document similar to the one in the above screenshot.

Opening Existing Document

There may be a situation when you open an existing document and edit it partially or
completely. Follow the steps given below to open an existing document −

Step 1 − Click the File tab and select the Open option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 20/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − This will display the following file Open dialog box. This lets you navigate through
different folders and files, and also lets you select a file which you want to open.

https://www.tutorialspoint.com/word/word_quick_guide.htm 21/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Finally, locate and select a file which you want to open and click the small triangle
available on the Open button to open the file. You will have different options to open the file, but
simply use the Open option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 22/194
5/1/2021 Word - Quick Guide - Tutorialspoint

This will open your selected file. You can use the Open Read-Only option if you are willing just
to read the file and you have no intention to modify, i.e., edit the file. Other options can be used
for advanced usage.

Closing a Document in Word 2010

In this chapter, we will understand how to close a document in Word 2010. When you finish
working with a document, you will proceed to close the document. Closing a document removes
it from your computer screen and if you had other documents open, Word displays the last
document you used otherwise, you see a blank Word window. Here are simple steps to close an
opened document −
Step 1 − Click the File tab and select the Close option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 23/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − When you select the Close option and if the document is not saved before closing, it
will display the following Warning box asking whether the document should be saved or not.

Step 3 − To save the changes, click Save, otherwise click Don't Save. To go back to the
document, click Cancel. This will close the document and if you have other documents open,

https://www.tutorialspoint.com/word/word_quick_guide.htm 24/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Word displays the last document you used, otherwise, you see a blank Word window as shown
below −

Context Help in Word 2010

In this chapter, we will discuss Context Help in Word 2010. Microsoft Office provides more than
one method for calling up Help when you need it. We will discuss a few important methods in
this chapter −

Context Sensitive Help

This is the easiest way of getting help about any of the options available at word screen. You
just need to bring your mouse pointer over an option and wait for 2 seconds, MS Word will pop-
up a small balloon help giving you detail about the operation. If word has additional help for that
option, then it gives the option Press F1 for more help as shown below when you bring your
mouse pointer over the color fill option. You can press the F1 key to get further help on this
option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 25/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Using F1 Key

You can press the F1 key when you are in the middle of doing something and Office will display
the various categories of help as shown below. You can either search a keyword using the
Search option or you can browse the listed categories to go through a topic in detail −

https://www.tutorialspoint.com/word/word_quick_guide.htm 26/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Using Help Icon

You can also have similar help window as shown above, by clicking the Help icon located just
above the right edge of the ribbon as shown below −

https://www.tutorialspoint.com/word/word_quick_guide.htm 27/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Using Help Option

You can communicate with Microsoft using the Help option available under the File tab.

https://www.tutorialspoint.com/word/word_quick_guide.htm 28/194
5/1/2021 Word - Quick Guide - Tutorialspoint

As shown above, you can use Microsoft Office Help to launch the Help window, or Getting
Started link to go to Microsoft’s official website, otherwise use the Contact us option to contact
Microsoft via email or phone.

Insert Text in Word 2010

In this chapter, we will discuss how to insert text in Word 2010. Many times it is required to go
back and insert additional text in an existing line. Microsoft Word provides two ways to insert
text in existing text and we will show how to use both the methods of inserting text −

Insert and Add Text

First we will see how inserted text will be added into the existing content without replacing any
existing content.
Step 1 − Click the location where you wish to insert text; you can also use the keyboard arrows
to locate the place where the text needs to be inserted.

https://www.tutorialspoint.com/word/word_quick_guide.htm 29/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Start typing the text that needs to be inserted. Word inserts the text to the left of the
insertion point, moving the existing text to the right

https://www.tutorialspoint.com/word/word_quick_guide.htm 30/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Insert and Replace Text

In the Insertion mode, text will be added into the existing content but same time it will over write
all the content which comes in its way.

Step 1 − Right-click the status bar and select the Overtype option from the displayed menu.

https://www.tutorialspoint.com/word/word_quick_guide.htm 31/194
5/1/2021 Word - Quick Guide - Tutorialspoint

When you select the Overtype option, the status bar will show the insert mode as shown below
−

https://www.tutorialspoint.com/word/word_quick_guide.htm 32/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click on the Insert text available at the status bar and it will switch to the Overtype
mode as shown below −

Step 3 − Now click the location where the text needs to be inserted or you can use the
keyboard arrows to locate the place where the text needs to be inserted.

https://www.tutorialspoint.com/word/word_quick_guide.htm 33/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 4 − Start typing the text that needs to be inserted. Word will replace the existing text with
the newly typed text without moving the position of the exiting test.

https://www.tutorialspoint.com/word/word_quick_guide.htm 34/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Note − Microsoft Word 2010 disabled the functionality of the Insert key and it does nothing, so
you will have to follow-up with the above mentioned procedure to turn-on or turn-off the Insert
mode.

Select Text in Word 2010

In this chapter, we will discuss how to select text in Word 2010. Selecting a text is one of the
most important skills required while editing a word document. You can perform various
operations on a selected text; you can delete the selected text, copy it, move it, apply formatting
to it, change its capitalization, etc.
The most common method of selecting a text is to click and drag the mouse over the text you
want to select. Following table lists down a few other simple methods that will help you in
selecting text in different scenarios −

S.No Component & Selection Method

Selecting text between two points

1
Click at the start of the block of text, hold down Shift, and click at the end of the block.

Selecting a single word

2
Double-click anywhere on the word you want to select.

Selecting a paragraph
3
Triple-click anywhere on the paragraph you want to select.

Selecting a sentence
4
Hold down the Ctrl key and click anywhere in the sentence you want to select.

Selecting a column of text

5 Hold down Alt, click and hold the mouse button, and drag over the column you want
to select.

Note that only one part of the document can be in the selected state. If you have one portion of
the document in selected state and as soon as you try to select any other part of the document,
previous part will automatically be de-selected.

Using the Selection Bar

The black shaded area in the following screen shot is called the selection bar. When you bring
your cursor in this area, it turns into a rightward-pointing arrow.

https://www.tutorialspoint.com/word/word_quick_guide.htm 35/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can use the selection bar to select the various components of a document as described in
the following table −

S.No Component & Selection Method

Selecting a line
1 Bring your mouse in the selection bar area and click in front of the line you want to
select.

Selecting a paragraph
2 Bring your mouse in the selection bar area and double click in front of the paragraph
you want to select.

Selecting the document

3
Bring your mouse in the selection bar area and triple-click.

Using the Keyboard

Keyboard provides very good support when you want to select various components of the
document as described in the following table −

https://www.tutorialspoint.com/word/word_quick_guide.htm 36/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Key & Selection Method Selecting Text

Ctrl + A
1
Press Ctrl + A keys to select the entire document.

Shift
2 Keep pressing the Shift key and use any of the arrow keys to select the portion of
text.

F8
3
Press F8 and then use any of the arrows keys to select the portion of text.

Ctrl + Shift + F8
4 Press Ctrl + Shift + F8 and then use any of the arrows keys to select column of the
text.

Delete Text in Word 2010

In this chapter, we will discuss how to delete text in Word 2010. It is very common to delete text
and retype the content in your Word document. You might type something you did not want to
type or there is something extra which is not required in the document. Regardless of the
reason, Word offers you various ways of deleting the text in partial or complete content of the
document.

Using Backspace & Delete Keys

The most basic deletion technique is to delete characters one at a time by pressing either the
backspace key or the delete key. Following table describes how you can delete single character
or a whole word by using either of these two keys −

https://www.tutorialspoint.com/word/word_quick_guide.htm 37/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Keys & Deletion Methods

Backspace

1 Keep the insertion point just after the character you want to delete and press the
Backspace key. Word deletes the character immediately to the left of the insertion
point.

Ctrl + Backspace

2 Keep the insertion point just after the word you want to delete and press Ctrl +
Backspace key. Word deletes the whole word immediately to the left of the insertion
point.

Delete
3 Keep the insertion point just before the character you want to delete and press the
Delete key. Word deletes the character immediately to the right of the insertion point.

Ctrl + Delete
4 Keep the insertion point just before the word you want to delete and press Ctrl +
Delete key. Word deletes the word immediately to the right of the insertion point.

Using Selection Method

You have learnt how to select various parts of a Word document. You can make use of that
learning to delete those selected parts as described in the following table −

https://www.tutorialspoint.com/word/word_quick_guide.htm 38/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Component Selection & Delete Methods

Deleting text between two points

1 Click at the start of the block of text, hold down the Shift key, and click at the end of
the block to select the portion of text and finally press either the Backspace key or
the Delete key.

Deleting a single word

2 Double-click anywhere on the word you want to delete and finally press either the
Backspace key or the Delete key.

Deleting a paragraph
3 Triple-click anywhere on the paragraph you want to delete and finally press either the
Backspace key or the Delete key.

Deleting a sentence
4 Hold down the Ctrl key and click anywhere in the sentence you want to delete and
finally press either the Backspace or the Delete key.

Deleting a column of text

5 Hold down the Alt key, click and hold the mouse button, and drag over the column
you want to delete and finally press either the Backspace key or the Delete key.

Deleting a line
6 Bring your mouse in the selection bar area and click in front of the line you want to
delete and finally press either the Backspace key or the Delete key.

Deleting entire document content

7 Press Ctrl + A keys to delete the entire document and finally press either the
Backspace key or the Delete key.

Note − The black shaded area in the following screen shot is called the selection bar. When
you bring your cursor in this area, it turns into a rightward-pointing arrow.

https://www.tutorialspoint.com/word/word_quick_guide.htm 39/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Move Text in Word 2010

In this chapter, we will discuss how to move text in Word 2010. At times, it is required to move a
text from one location to another location in the same document or in any another document.
You can move text from one location in a document to another by using the drag-and-drop
technique with the help of mouse. This tutorial will teach you how to use the drag and drop
technique to move text.

Move within the same document

Step 1 − Select a portion of the text using any of the text selection methods.

https://www.tutorialspoint.com/word/word_quick_guide.htm 40/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Now take your mouse pointer over the selected text and hold the left button of the
mouse and keep holding it while moving around the document.
Step 3 − Take your mouse pointer to the place where you want to move the selected text and
release the mouse button. You will see that the selected text is moved to the desired location.

https://www.tutorialspoint.com/word/word_quick_guide.htm 41/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Move within different documents

You can move the selected text from one document to another document. Following are some
simple steps which will help you in moving text from one document to another document.

Step 1 − Keep both the documents opened and to ensure that both documents are visible, click
the Arrange All button on the View tab on the Ribbon.

This will display both the documents as shown below −

https://www.tutorialspoint.com/word/word_quick_guide.htm 42/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Now, select a portion of the text using any of the text selection methods.
Step 3 − Take your mouse pointer over the selected text and hold the left button of the mouse
and keep holding it while moving around the document.
Step 4 − Take your mouse pointer at the place in the second document where you want to
move the selected text and release the mouse button. You will see that the selected text is
moved to the desired location in the second document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 43/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Note − In case you have more than two documents, you can use the Alt + Tab keys to switch
through the different documents and select the desired destination document.

Copy & Paste in Word 2010

In this chapter, we will discuss how to copy, cut and paste in Word 2010. In the previous
chapter, we understood how we can select the desired text and move it to any other location in
the same document or in any other document. This tutorial will teach you how to use copy, cut
and paste techniques to duplicate a text leaving the original text intact or removing the original
text completely.
To use copy and paste or cut and paste operations, Word makes use of a temporary memory
which is called the clipboard. When you copy or cut a text, it stay on the clipboard temporarily
and in the second step you can paste this content at the desired location.

Copy & Paste Operation

https://www.tutorialspoint.com/word/word_quick_guide.htm 44/194
5/1/2021 Word - Quick Guide - Tutorialspoint

The Copy operation will just copy the content from its original place and create a duplicate copy
of the content at the desired location without deleting the text from it's the original location.
Following is the procedure to copy the content in word −
Step 1 − Select a portion of the text using any of the text selection methods.

Step 2 − You have various options available to copy the selected text in clipboard. You can
make use of any one of the options −
Using Right-Click − When you right-click on the selected text, it will display the copy
option, click this option to copy the selected content in clipboard.
Using Ribbon Copy Button − After selecting text, you can use the copy button
available at the ribbon to copy the selected content in clipboard.

Using Ctrl + c Keys − After selecting a text, just press Ctrl + c keys to copy the
selected content in clipboard.

https://www.tutorialspoint.com/word/word_quick_guide.htm 45/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Finally click at the place where you want to copy the selected text and use either of
these two simple options −

Using Ribbon Paste Button − Just click the Paste button available at the ribbon to
paste the copied content at the desired location.
Using Ctrl + v Keys − This is simplest way of pasting the content. Just press Ctrl + v
keys to paste the content at the new location.

https://www.tutorialspoint.com/word/word_quick_guide.htm 46/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Note − You can repeat the Paste operation as many times as you like to paste the same
content.

Cut & Paste Operation

The Cut operation will cut the content from its original place and move the content from its
original location to a new desired location. Following is the procedure to move the content in
word −
Step 1 − Select a portion of the text using any of the text selection methods.

https://www.tutorialspoint.com/word/word_quick_guide.htm 47/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Now, you have various options available to cut the selected text and put it in the
clipboard. You can make use of one of the options −

Using Right-Click − If right-click on the selected portion of text, it will display cut
option, just click this option to cut the selected content and keep it in clipboard.
Using Ribbon Cut Button − After selecting a portion of text, you can use cut button
available at the ribbon to cut the selected content and keep it in clipboard.
Using Ctrl + x Keys − After selecting a portion of text, just press Ctrl + x keys to cut
the selected content and keep it in clipboard.

https://www.tutorialspoint.com/word/word_quick_guide.htm 48/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Finally, click at the place where you want to move the selected text and use either of
these two simple options −
Using Ribbon Paste Button − Just click the Paste button available at the ribbon to
paste the content at the new location.
Using Ctrl + v Keys − This is simplest way of pasting the content. Just press Ctrl + v
keys to paste the content at the new location.

https://www.tutorialspoint.com/word/word_quick_guide.htm 49/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Note − You can repeat the Paste operation as many times as you like to paste the same
content.

Copy, Cut & Paste in different documents

You can use the same procedure that we discussed above to copy and paste or cut and paste
content from one document to another document. This is very simple, just copy or cut the
desired content from one document and go into another document where you want to paste the
content and use mentioned step to paste the content.
You can use the Alt + Tab keys to switch through the different documents and select the desired
destination document.

Find & Replace in Word 2010

In this chapter, we will discuss the Find and Replace operation in Word 2010. While working on
editing a document you come across a situation very frequently when you want to search a
particular word in your document and many times you will be willing to replace this word with
another word at a few or all the places throughout the document. Here, we will understand how
to find a word or phrase in a word document and how to replace an existing word with any other
word using simple steps.

Find Command

https://www.tutorialspoint.com/word/word_quick_guide.htm 50/194
5/1/2021 Word - Quick Guide - Tutorialspoint

The Find command enables you to locate specific text in your document. Following are the
steps to find a word document in the following screen −
Step 1 − Let us work out on a sample text available in our Word document. Just type =rand()
and press Enter; the following screen will appear −

Step 2 − Click the Find option in the Editing group on the Home tab or press Ctrl + F to
launch the Navigation pane −

https://www.tutorialspoint.com/word/word_quick_guide.htm 51/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Enter a word which you want to search in the Search box, as soon as you finish typing,
Word searches for the text you entered and displays the results in the navigation pane and
highlights the word in the document as in the following screenshot −

https://www.tutorialspoint.com/word/word_quick_guide.htm 52/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 4 − You can click the clear button (X) to clear the search and results and perform another
search.
Step 5 − You can use further options while searching for a word. Click the option button to
display the options menu and then click the Options option; this will display a list of options.
You can select the options like match case to perform case-sensitive search.

Step 6 − Finally, if you are done with the Search operation, you can click the close button (X)
to close the Navigation Pane.

Find & Replace Operation

We assume you are an expert in searching a word or phrase in a word document as explained
above. This section will teach you how you can replace an existing word in your document.
Following are the simple steps −
Step 1 − Click the Replace option in the Editing group on the Home tab or press Ctrl + H to
launch the Find and Replace dialog box shown in Step 2 −

https://www.tutorialspoint.com/word/word_quick_guide.htm 53/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Type a word which you want to search. You can also replace the word using the Find
and Replace dialog box as in the following screenshot −

https://www.tutorialspoint.com/word/word_quick_guide.htm 54/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Click the Replace button available on the Find and Replace dialog box and you will
see the first occurrence of the searched word would be replaced with the replace with word.
Clicking again on Replace button would replace next occurrence of the searched word. If you
will click Replace All button then it would replace all the found words in one go. You can also
use Find Next button just to search the next occurence and later you can use Replace button
to replace the found word.
Step 4 − You can use More >> button available on the dialog box to use more options and to
make your search more specific like case sensitive search or searching for whole word only etc.
Step 5 − Finally, if you are done with the Find and Replace operation, you can click the Close
(X) or Cancel button of the dialog box to close the box.

Spell Check in Word 2010

In this chapter, we will discuss how to check spelling and grammar in Word 2010. Microsoft
Word provides a decent Spelling and Grammar Checker which enables you to search for and
correct all spelling and grammar mistakes in your document. Word is intelligent enough to
identify misspelled or misused, as well as grammar errors and underlines them as follows.
A red underline beneath spelling errors.
A green underline beneath grammar errors.
https://www.tutorialspoint.com/word/word_quick_guide.htm 55/194
5/1/2021 Word - Quick Guide - Tutorialspoint

A blue line under correctly spelled but misused words.

Check Spelling and Grammar using Review tab

Here is the simple procedure to find out the spelling mistakes and fix them −
Step 1 − Click the Review tab and then click the Spelling & Grammar button.

Step 2 − A Spelling and Grammar dialog box will appear and will display the wrong spellings or
errors in grammar. You will also get suggestions to correct as shown below −

https://www.tutorialspoint.com/word/word_quick_guide.htm 56/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Now you have following options to fix the spelling mistakes −

Ignore − If you are willing to ignore a word, then click this button and Word ignores the
word throughout the document.
Ignore All − Like Ignore, but this ignores all occurrences of the same misspelling, not
just once but throughout the document.
Add to Dictionary − Choose Add to Dictionary to add the word to the Word spelling
dictionary.
Change − This will change the wrong word using the suggested correct word.
Change All − Like Change, but this changes all occurrences of the same misspelling,
not just once but throughout the document.

AutoCorrect − If you select a suggestion, Word creates an AutoCorrect entry that

automatically corrects this spelling error from now on.
Following are the different options in case you have grammatical mistake −
Next Sentence − You can click Next Sentence to direct the grammar checker to skip
ahead to the next sentence.
Explain − The grammar checker displays a description of the rule that caused the
sentence to be flagged as a possible error.
Options − This will open the Word Options dialog box to allow you to change the
behavior of the grammar checker or spelling options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 57/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Undo − This will undo the last grammar changed.

Step 3 − Select one of the given suggestions you want to use and click the Change option to fix
the spelling or grammar mistake and repeat the step to fix all the spelling or grammar mistake.
Step 4 − Word displays a dialog box when it finishes checking for spelling and grammar
mistakes, finally Click OK.

Check Spelling and Grammar using Right Click

If you will right-click the mouse button over a misspelled word, then it will show you the correct
suggestions and the above mentioned options to fix the spelling or grammar mistake. Try it
yourself.

https://www.tutorialspoint.com/word/word_quick_guide.htm 58/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Zoom In-Out in Word 2010

In this chapter, we will discuss how to zoom in and zoom out in Word 2010. Microsoft Word
provides a functionality to apply zoom-in and zoom-out operations on a document. When we
apply the zoom-in operation, it enlarges the size of text whereas applying the zoom-out
operation reduces the size of text.

A zoom operation just changes the size of the font on-screen without impacting any other
attribute of the document. You can apply the zoom operation in various ways as explained in
this chapter.

Zoom-in & Zoom-out using view tab

Here is the simple procedure to apply the zoom-in or the zoom-out operations using the View
tab −
Step 1 − Click the View tab and then click the Zoom button as shown below.

https://www.tutorialspoint.com/word/word_quick_guide.htm 59/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − When you click the Zoom button, a Zoom dialog box will appear as shown below. This
will display the zoom options box to select a value to reduce or increase the size of the
document on-screen. By default, it will be 100%; you can select 200% to increase the size of the
font or 75% to reduce the size of the font.
You can click the Many pages down arrow and select to display multiple pages.

https://www.tutorialspoint.com/word/word_quick_guide.htm 60/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Once you are done with selecting an option, click OK to apply the changes on the
document.
Step 4 − Try different options available, for example Page Width and Text Width.

Zoom-in & Zoom-out using (+) and (-) Buttons

The following screenshot shows two buttons Zoom-out which is the (-) button and Zoom-in
which is the (+) button.

https://www.tutorialspoint.com/word/word_quick_guide.htm 61/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 1 − Click the Zoom-out button, you will find that your document size will decrease by 10%
each time you click the button. Similar way, if you click on Zoom-in button your document size
will increase by 10% each time you click the button.
Step 2 − Try this simple operation with different values to see the difference. The above
screenshot shows 140% zoom-in view of the document.

Special Symbols in Word 2010

In this chapter, we will discuss the use of special symbols in Word 2010. Your keyboard may not
have many characters available but you want to use those characters in your document; in such
situations, you have the option to insert Special Symbols the way we will further understand in
this chapter.

To insert symbols that are occasionally used, follow the steps in this section. If you find yourself
using a particular symbol frequently, you can assign a keyboard shortcut to it.

Insert Special Symbols

Here is a simple procedure to apply zoom-in or zoom-out operation using the View tab −
Step 1 − To insert a special symbol, bring your cursor at the place where you want to insert the
symbol. Click the Insert tab. You will find two options under the symbol button (a) Equation and
https://www.tutorialspoint.com/word/word_quick_guide.htm 62/194
5/1/2021 Word - Quick Guide - Tutorialspoint

(b) Symbols. Click either of these two options based on your requirement. You will further use
equations while preparing mathematical or scientific or any similar document. For now, we are
going to understand the use of the Symbol button as shown below.

Step 2 − When you click the Symbol button, a small list of symbols will appear as shown below.

https://www.tutorialspoint.com/word/word_quick_guide.htm 63/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Now click on any of the available symbols in the box to insert that in your document at
the selected location. If you do not find the desired symbol in this small box, then you can click
at the More Symbols option to have a wide range of symbols as shown below in the symbol
dialog box. You can select any of the symbol and then click the Insert button to insert the
selected symbol.

https://www.tutorialspoint.com/word/word_quick_guide.htm 64/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Assign Shortcut Key

You can assign a keyboard shortcut to type any of the available symbol. Following are the steps
to assign Ctrl + Q key to insert the © symbol which is one of the available symbols in the
special symbols list −
Step 1 − Assume you already have the following symbol dialog box opened.

https://www.tutorialspoint.com/word/word_quick_guide.htm 65/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the symbol for which a shortcut key needs to be assigned. Now click Shortcut
Key button which will display the following Customize Keyboard dialog box.

Step 3 − Now type the selected shortcut key in the shortcut key box. You press Ctrl + Q and
then click the Assign button to assign the shortcut key. You will see that the selected key will be
added in the list of assigned keys. Finally, use the Close button to close the dialog box.
https://www.tutorialspoint.com/word/word_quick_guide.htm 66/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 4 − Now try to type Ctrl + Q using the keyboard directly and you will find that you are able
to type © symbol without going into the symbol dialog box.

Undo Changes in Word 2010

In this chapter, we will discuss how to undo and redo changes in Word 2010. Microsoft word
provides two important features called the Undo and the Repeat or Redo. The Undo feature is
used to undo the previous action and the Repeat or Redo feature is used to repeat the previous
action.
For example, if you mistakenly delete text, you can use the Undo feature to recover it. In a
similar way, if you delete a character and you want to delete more characters then you can use
the Repeat operation.

How to use Undo & Repeat operations

You can access the Undo and Repeat buttons from the Quick Access toolbar. You should make
a note that the Repeat button is also called Redo button and both the operations have the same
meaning.

Here is the simple procedure to apply undo or repeat (redo) operations −

Step 1 − Let us type some text in a blank document. Now click the Repeat (Redo) button and
you will see that Word will repeat the same operation for you.

https://www.tutorialspoint.com/word/word_quick_guide.htm 67/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Now to examine the undo operation, let us delete the last word operation character
by character so that you have the following text remaining in the line.

Step 3 − Let us try to click the Undo button one by one. You will see that Word will recover all
the deleted characters one by one after performing a few undo operations.

https://www.tutorialspoint.com/word/word_quick_guide.htm 68/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Shortcuts to use Undo & Repeat operations

Though you can access the Undo and Repeat commands from the Quick Access toolbar, but
because these commands are the most frequently used commands, we recommend you
memorize their keyboard shortcuts which are as follows −

S.No Shortcuts & Operation

Ctrl + Z
1
Undoes the previous action.

Ctrl + Y
2
Repeats the previous action.

Note that if the previous action was Undo, Ctrl+Y redoes the Undone action.

Setting Text Fonts in Word 2010

In this chapter, we will discuss how to set the text fonts and size in Word 2010. Microsoft word
allows you to use different fonts with different size. You can change your document's
appearance by changing the fonts and their size. Usually you use different fonts for paragraphs
and headings. It is important to learn how to use different fonts. This chapter will teach you how
to change a font and its size in simple steps.
https://www.tutorialspoint.com/word/word_quick_guide.htm 69/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Change the Font Type & Size

We will understand in brief the font buttons that we will further use in this tutorial. Following is a
screenshot to show you a few font related buttons.

Step 1 − Select the portion of text the font of which needs to be changed and click the Home
tab. Now click the Font Type button to list down all the fonts available as shown below.

Step 2 − Try to move the mouse pointer over the listed fonts. You will see that the text font
changes when you move the mouse pointer over different fonts. You can use the Font Scroll

https://www.tutorialspoint.com/word/word_quick_guide.htm 70/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Bar to display more fonts available. Finally select a desired font by clicking over the font name
in the list. We have selected MV Boli as the font for our sample text.

Step 3 − Similar way, to change the font size, click over the Font Size button which will display
a font size list. You will use the same procedure to select a desired font size that you have used
while selecting a font type.

https://www.tutorialspoint.com/word/word_quick_guide.htm 71/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Use Shrink and Grow Buttons

You can use a quick way to reduce or enlarge the font size. As shown in the first screenshot, the
Shrink Font button can be used to reduce the font size whereas the Grow Font button can be
used to enlarge the font size.

Try to click either of these two buttons and you will see the effect. You can click a single button
multiple times to apply the effect. Each time you click either of the buttons, it will enlarge or
reduce the font size by 1 point.

Clear Formatting Options

All of the setting can be reset to plain text, or the default formatting. To reset text to default
settings −
Step 1 − Select the portion of text that you want to reset.
Step 2 − Click the Clear Formatting button in the Home tab Font group, or simply use Ctrl +
SPACEBAR.

https://www.tutorialspoint.com/word/word_quick_guide.htm 72/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Text Decoration in Word 2010

In this chapter, we will discuss text decoration in Word 2010. When we use the term decorate, it
means decorate by putting the text in italics, underlining the text or making it bold to look more
fancy and much more. In this chapter, we will also learn how we can strikethrough a text.

Making text bold

We use bold text to give more emphasis on the sentence. It is very simple to change a selected
portion of text into bold font by following two simple steps −
Step 1 − Select the portion of text that the font of which needs to be made bold. You can use
any of the text selection methods to select the portion of text.
Step 2 − Click the Font Bold [ B ] button in the Home tab Font group, or simply use Ctrl + B
keys to make the selected portion of text bold.

https://www.tutorialspoint.com/word/word_quick_guide.htm 73/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Making Text Italic

An italic text appears with a small inclination and we use the italicized text to differentiate it from
other text. It is very simple to change the selected text into italic font by following two simple
steps −
Step 1 − Select the portion of text the font of which needs to be italicized. You can use any of
the text selection methods to select the portion of text.
Step 2 − Click the Font Italic [ I ] button in the Home tab Font group, or simply use the Ctrl + I
keys to convert the portion of text in italic font.

https://www.tutorialspoint.com/word/word_quick_guide.htm 74/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Underline the Text

An underlined portion of text appears with an underline and we use the underlined portion of
text to make it more distinguished from other text. It is very simple to change the selected text
into underlined font by following two simple steps −
Step 1 − Select the portion of text which needs to be underlined. You can use any of the text
selection method to select the portion of text.
Step 2 − Click Font Underline [ U ] button in the Home tab Font group, or simply use the Ctrl
+ U keys to put an underline under the text.

https://www.tutorialspoint.com/word/word_quick_guide.htm 75/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Strikethrough the Text

Strikethrough portion of text will look as if a line has been drawn through the middle of it. A
strikethrough portion of text indicates that it has been deleted and that the portion of text is not
required any more. It is very simple to change a selected portion of text into a strikethrough
portion of text by following two simple steps −
Step 1 − Select the portion of text that you want to change to a bold font. You can use any of
the text selection method to select the portion of text.
Step 2 − Click Font Strikethrough [ abc ] button in the Home tab Font group to put a line in
the middle of the text which is called strikethrough the text.

https://www.tutorialspoint.com/word/word_quick_guide.htm 76/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Change Text Case in Word 2010

In this chapter, we will discuss how to change text cases in Word 2010. You can also capitalize
a character you are typing by pressing and holding the SHIFT key while you type. You can also
press the CAPS LOCK to have every letter that you type capitalized, and then press the CAPS
LOCK again to turn off capitalization.

Change Text to Sentence Case

A sentence case is the case where the first character of every sentence is capitalized. It is very
simple to change the selected portion of text into sentence case by following two simple steps −
Step 1 − Select the portion of text that that needs to be put in sentence case. You can use any
of the text selection methods to select the portion of text.
Step 2 − Click the Change Case button and then select the Sentence Case option to capitalize
the first character of every selected sentence.

https://www.tutorialspoint.com/word/word_quick_guide.htm 77/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Change Text to Lowercase

Changing text to lowercase is where every word of a sentence is in lowercase. It is very simple
to change a selected portion of text into lowercase by following two simple steps −
Step 1 − Select the portion of text that needs to be put in lowercase. You can use any of the text
selection methods to select the portion of text.
Step 2 − Click the Change Case button and then select Lowercase option to display all the
selected words in lowercase.

https://www.tutorialspoint.com/word/word_quick_guide.htm 78/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Change Text to Uppercase

This is where every word of a sentence is in uppercase. It is very simple to change selected text
into uppercase by following two simple steps −
Step 1 − Select the portion of text that you want to change to a bold font. You can use any of
the text selection method to select the portion of text.
Step 2 − Click the Change Case button and then select UPPERCASE option to display all
selected words in all caps. All characters of every selected word will be capitalized.

Capitalize Text

A capitalize case is the case where every first character of every selected word is in capital.
This is very simple to change selected text into capitalize by following two simple steps −
Step 1 − Select the portion of text that needs to be capitalized. You can use any of the text
selection method to select the portion of text.
Step 2 − Click the Change Case button and then select the Capitalize Each Word option to
put a leading cap on each selected word.

https://www.tutorialspoint.com/word/word_quick_guide.htm 79/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Toggle the Text

The Toggle operation will change the case of every character in reverse way. A capital character
will become a character in lower case and a character in lower case will become a character in
upper case. It is very simple to toggle case of the text by following two simple steps −
Step 1 − Select the portion of text that you want to change to a bold font. You can use any of
the text selection method to select the portion of text.
Step 2 − Click the Change Case button and then select the tOGGLE cASE option to change all
the words in lowercase into words in uppercase; the words in uppercase words change to words
in lowercase.

https://www.tutorialspoint.com/word/word_quick_guide.htm 80/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Change Text Color in Word 2010

In this chapter, we will discuss how to change text colors in Word 2010. We will also understand
how to mark text which should look like it was marked with a highlighter pen. In addition, we will
learn how to apply different effects on portions of text.

Change Font Colors

The text that we type comes in black by default; you can always change the color of the font to a
color of your choice. It is very simple to change the text color by following two simple steps −
Step 1 − Select the portion of text the font color of which needs to be changed. You can use any
of the text selection method to select the portion of text.
Step 2 − Click the Font Color button triangle to display a list of colors. Try to move your mouse
pointer over different colors and you will see the text color will change automatically. You can
select any of the colors available by simply clicking over it.
If you click at the left portion of the Font Color button, the selected color gets applied to the text
automatically; you need to click over the small triangle to display a list of colors.

https://www.tutorialspoint.com/word/word_quick_guide.htm 81/194
5/1/2021 Word - Quick Guide - Tutorialspoint

If you do not find a color of your choice, you can use the More Colors option to display the
color pallet box which allows you to select a color from a range of colors.

Highlight Text with Colors

You can highlight a selected portion of text using any color and it will look like it was marked
with a highlighter pen. Usually we highlight a text using yellow color. It is very simple to highlight
a portion of text with a color by following two simple steps
Step 1 − Select the portion of text that needs to be highlighted with color. You can use any of
the text selection method to select the portion of text.
Step 2 − Click the Text Highlight Color button triangle to display a list of colors. Try to move
your mouse pointer over different colors and you will see the text color changes automatically.
You can select any of the colors available by simply clicking over it.

If you click at the left portion of the Text Highlight Color button, then the selected color gets
applied to the portion of text automatically; you need to click over the small triangle to display a
list of colors.

https://www.tutorialspoint.com/word/word_quick_guide.htm 82/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Apply Text Effects

Microsoft word provides a list of text effect which add to the beauty of your document, especially
to the cover page or the headings of the document. This is very simple to apply various text
effects by following two simple steps −
Step 1 − Select the portion of text that you want to change to a bold font. You can use any of
the text selection method to select the portion of text.
Step 2 − Click the Text Effect button to display a list of effects including shadow, outline, glow,
reflection etc. Try to move your mouse pointer over different effects and you will see the text
effect will change automatically. You can select any of the text effect available by simply clicking
over it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 83/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Text Alignments in Word 2010

In this chapter, we will discuss text alignments in Word 2010. There are four types of paragraph
alignment available in Microsoft Word — left-aligned, center-aligned, rightaligned, and justified.

Left-Aligned Text

A paragraph's text is left aligned when it is aligned evenly along the left margin. Here is a simple
procedure to make a paragraph text left-aligned.
Step 1 − Click anywhere on the paragraph you want to align and click the Align Text Left
button available on the Home tab or simply press the Ctrl + L keys.

https://www.tutorialspoint.com/word/word_quick_guide.htm 84/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Center Aligned Text

A paragraph's text will be said center aligned if it is in the center of the left and right margins.
Here is a simple procedure to make a paragraph text center aligned.
Step 1 − Click anywhere on the paragraph you want to align and click the Center button
available on the Home tab or simply press the Ctrl + E keys.

https://www.tutorialspoint.com/word/word_quick_guide.htm 85/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Right-Aligned Text
A paragraph's text is right-aligned when it is aligned evenly along the right margin. Here is a
simple procedure to make a paragraph text right-aligned.

Step 1 − Click anywhere on the paragraph you want to align and click the Align Text Right
button available on the Home tab or simply press the Ctrl + R keys.

https://www.tutorialspoint.com/word/word_quick_guide.htm 86/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Justified Text
A paragraph's text is justified when it is aligned evenly along both the left and the right margins.
Following is a simple procedure to make a paragraph text justified.

Step 1 − Click anywhere on the paragraph you want to align and click the Justify button
available on the Home tab or simply press the Ctrl + J keys.

https://www.tutorialspoint.com/word/word_quick_guide.htm 87/194
5/1/2021 Word - Quick Guide - Tutorialspoint

When you click the Justify button, it displays four options, justify, justify low, justify high and
justify medium. You need to select only the justify option. The difference between these options
is that low justify creates little space between two words, medium creates a more space than
low justify and high creates maximum space between two words to justify the text.

Indent Paragraphs in Word 2010

In this chapter, we will discuss the how to indent paragraphs in Word 2010. As you know the
margin settings determine the blank space that appears on each side of a paragraph. You can
indent paragraphs in your document from the left margin, the right margin, or both the margins.
This chapter will teach you how to indent your paragraphs with or without the first line of the
paragraphs.

Left Indentation
Left indentation means to move the left edge of the paragraph inward towards the center of the
paragraph. Let us use the following steps to create left indentation.
Step 1 − Click anywhere on the paragraph you want to indent left and click the Increase Indent
button available on the Home tab or simply press the Ctrl + M keys. You can click multiple
times to create deeper indentation.

https://www.tutorialspoint.com/word/word_quick_guide.htm 88/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − You can remove left indentation by clicking the Decrease Indent button available on
Home tab or simply press Ctrl + Shift+ M keys. You can click multiple times to remove deeper
indentation.
You can also use the Paragraph Dialog Box to set left and right indentations. We will see this
dialog box in the last section of this chapter.

Right Indentation
Right indentation means to move the right edge of the paragraph inward towards the center of
the paragraph. Let us use the following steps to create right indentation.
Step 1 − Click anywhere on the paragraph you want to indent and then click on the Increase
Right Indent spinner available on the Page Layout tab. You can click on the spinner multiple
times to create deeper indentation. You can use the Left Indent spinners as well to set left
indentation from the same place.

https://www.tutorialspoint.com/word/word_quick_guide.htm 89/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − You can remove right indentation by clicking the Decrease Right Indent spinner in the
opposite direction.

You can also use the Paragraph Dialog Box to set the left and the right indentations. We will
see this dialog box in the next section.

First Line Indentation

You can move the left side of the first line of a paragraph inward toward the center. Let us see
the procedure to perform first line indentation.
Step 1 − Click anywhere on the paragraph you want to indent right and click the Paragraph
Dialog Box launcher available on the Home tab.

Step 2 − Click the Before Text spinner to set left indentation and select the First Line Option
to move the left side of the first line of a paragraph inward toward the center. You can control the
movement by setting the Indentation Unit. A preview box will give only the idea and not the
indentation status.

https://www.tutorialspoint.com/word/word_quick_guide.htm 90/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Hanging Indentation
You can move the left side of the first line of a paragraph leftward, away from the center which is
called the hanging indentation. Let us see the procedure to perform hanging indentation.

Step 1 − Click anywhere on the paragraph you want to indent right and click the Paragraph
Dialog Box launcher available on the Home tab.
Step 2 − Click the Before Text spinner to set left indentation and select Hanging Option to
move the left side of the first line of a paragraph leftward, away from the center. You can control
the movement by setting the Indentation Unit. A preview box will give only the idea and not the
indentation status.

https://www.tutorialspoint.com/word/word_quick_guide.htm 91/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can use the After Text spinner to set the right indentation. You can try it yourself.

Create Bullets in Word 2010

Microsoft word provides bullets and numbers to put a list of items in a nice order. This chapter
will teach you simple steps to create either the bulleted or the numbered lists in simple steps.

Create a List from Existing Text

This is very simple to convert a list of lines into a bulleted or numbered list. Following are the
simple steps to create either bulleted list or numbered list.
Step 1 − Select a list of text to which you want to assign bullets or numbers. You can use any of
the text selection method to select the portion of text.

Step 2 − Click the Bullet Button triangle to display a list of bullets you want to assign to the list.
You can select any of the bullet style available by simply clicking over it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 92/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − If you are willing to create a list with numbers, then click the Numbering Button
triangle instead of the bullet button to display a list of numbers you want to assign to the list. You
can select any of the numbering style available by simply clicking over it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 93/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Create a List as You Type

You can create a bulleted list as you type. Word will automatically format it according to your
text. Following are the simple steps to create bulleted list as you type.

Step 1 − Type *, and then either press the SPACEBAR or press the TAB key, and then type the
rest of what you want in the first item of the bulleted list.
Step 2 − When you are done with typing, press Enter to add the item in the list automatically
and go to add next item in the list.

Step 3 − Repeat Step 2 for each list item.

https://www.tutorialspoint.com/word/word_quick_guide.htm 94/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can create a numbered list as you type. Word will automatically format it according to your
text. Following are the simple steps to create numbered list as you type.

Step 1 − Type 1, and then either press the SPACEBAR or press the TAB key, and then type the
rest of what you want in the first item of the numbered list.
Step 2 − When you are done with typing, press Enter to add the item in the list automatically
and go to add next item in the list.

Step 3 − Repeat Step 2 for each list item.

https://www.tutorialspoint.com/word/word_quick_guide.htm 95/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can create sub-lists. These sub-lists are called multi-lists. It is simple to create sublists;
press the Tab key to put items in sub-list. You can try it yourself.

Set Line Spacing in Word 2010

In this chapter, let us discuss how to set line spacing in Word 2010. A line spacing is the
distance between two lines in a Microsoft Word document. You can increase or decrease this
distance as per your requirement by following a few simple steps. This chapter will explain how
to set the distance between two lines as well as how to set the distance between two
paragraphs.

Spacing between Lines

Following are the simple steps to adjust spacing between two lines of the document.
Step 1 − Select the paragraph or paragraphs for which you want to define spacing. You can use
any of the text selection method to select the paragraph(s).

Step 2 − Click the Line and Paragraph Spacing Button triangle to display a list of options to
adjust space between the lines. You can select any of the option available by simply clicking
over it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 96/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Spacing between Paragraphs

You can also set distance between two paragraphs. Following are the simple steps to set this
distance.
Step 1 − Select the paragraph or paragraphs for which you want to define spacing and click the
Paragraph Dialog Box launcher available on the Home tab.
Step 2 − Click the Before spinner to increase or decrease the space before the selected
paragraph. Similar way, click the After spinner to increase or decrease the space after the
selected paragraph. Finally, click the OK button to apply the changes.

https://www.tutorialspoint.com/word/word_quick_guide.htm 97/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can use the Line Spacing option available at the dialog box to set line spacing as we have
seen in previous example. You can try it yourself.

Borders and Shades in Word 2010

In this chapter, we will discuss how to work on borders and shades in Word 2010. Microsoft
Word allows you to place a border on any or all of the four sides of selected text, paragraphs,
and pages. You can also add different shades to the space occupied by the selected text,
paragraphs, and pages. This chapter will teach you how to add any of the borders (left, right, top
or bottom) around a text or paragraph or a page and how to add different shadows to them.

Add Borders to Text

Following are the simple steps to add border to any text or paragraph.
Step 1 − Select the portion of text or paragraph to which you want to add border. You can use
any of the text selection method to select the paragraph(s).
Step 2 − Click the Border Button to display a list of options to put a border around the selected
text or paragraph. You can select any of the option available by simply clicking over it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 98/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Try to add different borders like left, right top or bottom by selecting different options
from the border options.

Step 4 − To delete the existing border, simply select the No Border option from the border
options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 99/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Note − You can add a horizontal line by selecting the Horizontal Line option from the border
options. Otherwise type --- (three hyphens) and press ENTER. A single, light horizontal line will
be created between the left and the right margins.

Add Borders to Page

You can add borders of your choice to word pages by following the steps given below.

Step 1 − Click the Border Button to display a list of options to put a border. Select the Border
and Shading option available at the bottom of the list of options as shown in the above
screenshot. This will display a Border and Shading dialog box. This dialog box can be used to
set borders and shading around a selected text or page borders.

Step 2 − Click the Page Border tab which will display a list of border settings, styles and
options whether this border should be applied to the whole document or just one page or the
first page.
Step 3 − You can use the Preview section to disable or enable left, right, top or bottom borders
of the page. Follow the instruction given in the preview section itself.
Step 4 − You can customize your border by setting its color, width by using different art
available under the style section.

https://www.tutorialspoint.com/word/word_quick_guide.htm 100/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can have similar or even better borders as given below.

Add Shades to Text

The following steps will help you understand how to add shades on a selected portion of text or
a paragraph(s).

https://www.tutorialspoint.com/word/word_quick_guide.htm 101/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 1 − Click the Border Button to display a list of options to put a border. Select the Border
and Shading option available at the bottom of the list of options as shown in the above
screenshot. This will display a Border and Shading dialog box. This dialog box can be used to
set borders and shading around a selected portion of text or page borders.

Step 2 − Click the Shading tab; this tab will display the options to select fill, color and style
and whether this border should be applied to a paragraph or a portion of text.
Step 3 − You can use the Preview section to have an idea about the expected result. Once you
are done, click the OK button to apply the result.

https://www.tutorialspoint.com/word/word_quick_guide.htm 102/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Set Tabs in Word 2010

In this chapter, we will discuss how to set tabs in Word 2010. Microsoft Word tabs help in setting
up information properly within a column. Word enables you to set left, center, right, decimal, or
bar tabs to line up columnar information. By default, Word places tabs every .5 inch across the
page between the left and right margins.

https://www.tutorialspoint.com/word/word_quick_guide.htm 103/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Tab & Description

Left
1
Left-aligns text at tab stop and this is the default tab.

Center
2
Centers text over tab stop.

Right
3
Right-aligns text at tab stop.

Decimal
4
Aligns numbers at decimal point over tab stop.

Bar
5
Creates a bar to separate the text.

Setting a Tab
Following are the simple steps to set the center and the right tabs in a Word document. You can
use similar steps but different tabs to set up decimal and bar tabs.

Step 1 − Type some text that you want to line up with the tab stops. Press the Tab key only
once between each column of information you to want to line up. I typed the following three
lines.

https://www.tutorialspoint.com/word/word_quick_guide.htm 104/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Select a tab type using the Tab button; assume the center tab and finally select the
paragraph or paragraphs the tabs of which you want to set. Next click the ruler where you want
the tab to appear, a tab will appear at the ruler where you just clicked and the selected portion of
text will be adjusted in the center.

Step 3 − Now select the right tab using the Tab Button and click the ruler at the right side
where you want to align the text at the right side. A right tab will appear at the ruler where you
just clicked and the selected portion of text will be right-aligned.

https://www.tutorialspoint.com/word/word_quick_guide.htm 105/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Moving a Tab
You can move an already set tab at a particular location by following the steps given below.

Step 1 − Click just before the line for which you want to change the tab setting. Drag the tab
sign available at the ruler to the left or right.

Step 2 − A vertical line marks its position as you drag and when you click and drag a tab, the
text moves with the tab.
https://www.tutorialspoint.com/word/word_quick_guide.htm 106/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Apply Formatting in Word 2010

In this chapter, we will discuss how to copy and apply formatting in Word 2010. If you already
have a well formatted portion of text and you want to apply similar formatting to another portion
of text, then Microsoft Word provides a feature to copy and apply a format from one portion of
text to another portion of text. This is very useful and a time saving operation.
Copy and Apply of text formatting works for various text attributes; for example, text fonts, text
colors, margins, headings, etc.

Copy and Apply Text Formatting

The following steps will help you understand how to copy and apply text formatting from one
portion of text in your document to another portion of text in your document.
Step 1 − Select the portion of text containing the formatting that you want to copy. I have
selected a text which has bold and underlined font as shown below.

https://www.tutorialspoint.com/word/word_quick_guide.htm 107/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − click the Home tab and click the Format Painter button to copy the format of the
selected text. As soon as you click the format painter button, the mouse pointer changes to a
paint brush when you move the mouse over your document.

Step 3 − Now you are ready to apply the copied text format to any of the selected text. So
select a text using mouse where you want to apply the copied text format. While selecting a
portion of text, you have to make sure that your mouse pointer is still in paint brush shape. After
selecting the text, just release the right-click button of the mouse and you will see that newly
selected text is changed to the format used for the original selection. You can click anywhere
outside the selection to continue working on your document for further editing.

https://www.tutorialspoint.com/word/word_quick_guide.htm 108/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Copy and Apply Text Formatting multiple times

Step 1 − If you are intended to apply formatting at multiple places, then you will have to double-
click the Format Painter button while copying the text format. Later on, you just keep selecting
the text where you want to apply the text formatting.

Step 2 − When you are done with applying formatting at all the places, click Format Painter to
come out of the format applying operation.

Adjust Page Margins in Word 2010

In this chapter, we will discuss how to adjust page margins in Word 2010. Margins are the space
between the edge of the paper and the text. You can adjust the right, left, top, and bottom
margins of your document. By default, Word sets all margins left, right, top, and bottom to 1
inch.

In the screenshot given below, I have shown top, left and right margins, if you will type the
complete page, word will leave 1-inch bottom margin as well.

https://www.tutorialspoint.com/word/word_quick_guide.htm 109/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Adjust Margins
The following steps will help you understand how to set margins for an open document.
Step 1 − Open the document the margins of which need to be set. If you want the margins to be
applied only to a selected part of a document, select that particular part.
Step 2 − Click the Page Layout tab, and click the Margins button in the Page Setup group.
This will display a list of options to be selected but you have to click the Custom Margins
option available at the bottom.
You can also select any of the predefined margins from the list, but using custom margins option
you will have more control on all the settings.

https://www.tutorialspoint.com/word/word_quick_guide.htm 110/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − You will have to display a Page Dialog Box as shown below where you can set top,
left, right and bottom margins under the Margins Tab. Select the Apply to: option to apply the
margin on selected text or complete document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 111/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 4 − If you are going to bind the document and want to add an extra amount of space on
one edge for the binding, enter that amount in the Gutter text box, and select the side the gutter
is on with the Gutter Position drop-down list. After setting all the desired values for all the
margins, click the OK button to apply the margins.

Header and Footer in Word 2010

In this chapter, we will discuss how to add header and footer in Word 2010. Headers and footers
are parts of a document that contain special information such as page numbers and the total
number of pages, the document title, company logo, any photo, etc. The header appears at the
top of every page, and the footer appears at the bottom of every page.

Add Header and Footer

The following steps will help you understand how to add header and footer in a Word document.
Step 1 − Click the Insert tab, and click either the Header button or the Footer button that
which needs to be added first. Assume you are going to add Header; when you click the Header
button it will display a list of built-in Headers from where you can choose any of the headers by
simply clicking on it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 112/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Once you select any of the headers, it will be applied to the document in editable
mode and the text in your document will appear dimmed, Header and Footer buttons appear
on the Ribbon and a Close Header and Footer button will also appear at the top-right corner.

Step 3 − Finally, you can type your information whatever you want to have in your document
header and once you are done, click Close Header and Footer to come out of the header

https://www.tutorialspoint.com/word/word_quick_guide.htm 113/194
5/1/2021 Word - Quick Guide - Tutorialspoint

insertion mode. You will see the final result as follows.

You can follow a similar procedure to add footer in your document.

Edit Header and Footer

The following steps will help you understand how to edit the existing header or footer of your
document.
Step 1 − Click the Insert tab, and click either the Header button or Footer button or whatever
you want to edit. Assume you are going to edit the Header, so when you click the Header
button it will display a list of options including the Edit Header option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 114/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click on the Edit Header option and Word will display the editable header as shown in
the following screenshot.

Step 3 − Now you can edit your document header and once you are done, click Close Header
and Footer to come out of the edit header mode.
You can follow a similar procedure to edit the footer in your document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 115/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Add Page Numbers in Word 2010

In this chapter, we will discuss how to add page numbers in Word 2010. Microsoft Word
automatically assigns page numbers on the pages of your document. Typically, page numbers
are printed either in header or footer but you have the option that can display the page number
in the left or right margins at the top or the bottom of a page.

Add Page Numbers

Following are the simple steps to add page numbers in a Word document.
Step 1 − Click the Insert tab, and click the Page Number button available in the header and
footer section. This will display a list of options to display the page number at the top, bottom,
current position etc.

Step 2 − When you move your mouse pointer over the available options, it displays further
styles of page numbers to be displayed. For example, when I take the mouse pointer at the
Bottom of Page option it displays the following list of styles.

https://www.tutorialspoint.com/word/word_quick_guide.htm 116/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Finally, select any one of the page number styles. I selected the Accent Bar 1 style by
clicking over it. You will be directed to the Page Footer modification mode. Click the Close
Header and Footer button to come out of the Footer Edit mode.

You can format your page numbers using the Format Page Numbers option available under
the listed options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 117/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Remove Page Numbers

The following steps will help you remove page numbering from a Word document.
Step 1 − Click the Insert tab, and click the Page Number button available in the header and
footer section. This will display a list of options to display page number at the top, bottom,
current position, etc. At the bottom, you will have the Remove Page Numbers option. Just click
this option and it will delete all the page numbers set in your document.

Insert Page Breaks in Word 2010

In this chapter, we will discuss how to insert page breaks in Word 2010. Microsoft Word
automatically starts a new page when the current page fills with text but you can insert a page
break to force Word to start text on a new page. You can insert a page break using either the
mouse or the keyboard.

Insert Page Breaks

The following steps will help you insert page breaks in a Word document.
Step 1 − Bring your insertion point immediately before the text that has to appear on a new
page.
Step 2 − Click the Insert tab, and click the Page Break button available in the Pages group.

https://www.tutorialspoint.com/word/word_quick_guide.htm 118/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Word inserts a page break and moves all text after the page break onto a new page. You can
also use the Ctrl + Enter keys to create a page break at the pointed location.

Delete a Page Break

Just put the insertion point on the previous page of the page break that needs to be deleted.
Press the Delete key multiple times until both the pages get merged.

https://www.tutorialspoint.com/word/word_quick_guide.htm 119/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Insert Blank Pages in Word 2010

In this chapter, let us discuss how to insert blank pages in Word 2010. A blank page is a page
which does not have any text or any other content over it. This chapter will also make you
understand how to delete a blank page from your Microsoft Word document.

Insert Blank Pages

Following are the simple steps to insert blank page in a word document.

Step 1 − Bring your insertion point immediately before the text where you want to insert a blank
page.
Step 2 − Click the Insert tab, and click the Blank Page button available in the Pages group.

Word inserts a new blank page and moves all the text after the page break onto a new page.

https://www.tutorialspoint.com/word/word_quick_guide.htm 120/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Delete Blank Pages

The following steps will help you delete blank page from a Word document.
Step 1 − Click the Home tab, and click the Show/Hide ¶ paragraph marks button available in
the Paragraph group or simply press the Ctrl + Shift + * keys. This will display all the page
breaks as shown below −

Step 2 − Bring your cursor immediately before the Page Break mark available on the blank
page and press the Delete Key. This will delete the blank page and again you can click the
Show/Hide ¶ paragraph marks button to hide all the paragraph marks.

https://www.tutorialspoint.com/word/word_quick_guide.htm 121/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Cover Pages in Word 2010

In this chapter, we will discuss Almost all the good documents and books have an attractive first
page that includes the document title, its subject, author and publisher name etc. This first page
is is the Cover Page and Microsoft Word provides an easy way to add a cover page.

Add Cover Pages

Following are the simple steps to add a cover page in a Word document.
Step 1 − Click the Insert tab, and click the Cover Page button available in the Pages group.
This will display a list of Built-in Cover Pages as shown below.

Step 2 − Choose a cover page from the options available in the gallery. The selected cover
page will be added as the first page of your document which can later be modified according to
the requirements. If you want to place the cover page elsewhere except the first page, right-click
the cover page in the gallery and select the location you want from the menu that appears.

https://www.tutorialspoint.com/word/word_quick_guide.htm 122/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Delete Cover Pages

The following steps will help you understand how to delete an existing cover page from a Word
document.

Step 1 − Click the Insert tab, and click the Cover Page button available in the Pages group.
This will display a list of Built-in Cover Pages as shown below. You will find a Remove Current
Cover Page option available at the bottom of the cover page gallery.

https://www.tutorialspoint.com/word/word_quick_guide.htm 123/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the Remove Current Cover Page option and your cover page will be deleted
from your document.

Page Orientation in Word 2010

In this chapter, we will discuss page orientation in Word 2010. Page Orientation is useful when
you print your pages. By default, Microsoft Word shows a page in portrait orientation and in this
case the width of the page is less than the height of the page; the page will be 8.5 inches × 11
inches.
You can change the page orientation from portrait to landscape orientation. In such case, the
width of the page will be more than the height of the page and page will be 11 inches × 8.5
inches.

Change Page Orientation

The following steps will help you understand how to change the page orientation of a word
document.

Step 1 − Open the Word document the orientation of which needs to be changed. By default,
orientation will be Portrait Orientation as shown below.

https://www.tutorialspoint.com/word/word_quick_guide.htm 124/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the Page Layout tab, and click the Orientation button available in the Page
Setup group. This will display an Option Menu having both the options (Portrait & Landscape)
to be selected.

https://www.tutorialspoint.com/word/word_quick_guide.htm 125/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Click any of the options you want to set to orientation. Because our page is already in
portrait orientation, we will click the Landscape option to change my orientation to landscape
orientation.

Create a Table in Word 2010

In this chapter, we will discuss how to create a table in Word 2010. A table is a structure of
vertical columns and horizontal rows with a cell at every intersection. Each cell can contain text
or graphics, and you can format the table in any way you want. Usually the top row in the table
is kept as a table header and can be used to put some informative instruction.

Create a Table
The following steps will help you understand how to create a table in a Word document.
https://www.tutorialspoint.com/word/word_quick_guide.htm 126/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 1 − Click the Insert tab followed by the Table button. This will display a simple grid as
shown below. When you move your mouse over the grid cells, it makes a table in the table that
appears in the document. You can make your table having the desired number of rows and
columns.

Step 2 − Click the square representing the lower-right corner of your table, which will create an
actual table in your document and Word goes in the table design mode. The table design mode
has many options to work with as shown below.

https://www.tutorialspoint.com/word/word_quick_guide.htm 127/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − This is an optional step that can be worked out if you want to have a fancy table. Click
the Table Styles button to display a gallery of table styles. When you move your mouse over
any of the styles, it shows real time preview of your actual table.

Step 4 − To select any of the styles, just click the built-in table style and you will see that the
selected style has been applied on your table.

https://www.tutorialspoint.com/word/word_quick_guide.htm 128/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Delete a Table
Following are the simple steps to delete an existing table from a word document.

Step 1 − Click anywhere in the table you want to delete.

Step 2 − Click the Layout tab, and click the Delete Table option under the Delete Table
Button to delete the complete table from the document along with its content.

https://www.tutorialspoint.com/word/word_quick_guide.htm 129/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Rows & Columns in Word 2010

In this chapter, we will discuss how to work with rows and columns in Word 2010. As discussed
in the previous chapter, a table is a structure of vertical columns and horizontal rows with a cell
at every intersection. A Word table can contain as many as 63 columns but the number of rows
is unlimited. This chapter will teach you how to add and delete rows and columns in a table.

Add a Row
Following are the simple steps to add rows in a table of a word document.

Step 1 − Click a row where you want to add an additional row and then click the Layout tab; it
will show the following screen.

Step 2 − Now use the Row & Column group of buttons to add any row below or above to the
selected row. If you click the Insert Below button, it will add a row just below the selected row
as follows.

https://www.tutorialspoint.com/word/word_quick_guide.htm 130/194
5/1/2021 Word - Quick Guide - Tutorialspoint

If you click the Insert Above button, it will add a row just above the selected row.

Delete a Row
The following steps will help you delete rows from a table of a Word document.

Step 1 − Click a row which you want to delete from the table and then click the Layout tab; it
will show the following screen.

https://www.tutorialspoint.com/word/word_quick_guide.htm 131/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the Layout tab, and then click the Delete Rows option under the Delete Table
Button to delete the selected row.

Add a Column
The following steps will help you add columns in a table of a Word document.
Step 1 − Click a column where you want to add an additional column and then click the Layout
tab; it will show the following screen.

Step 2 − Now use the Row & Column group of buttons to add any column to the left or right of
the selected column. If you click the Insert Left button, it will add a column just left to the
selected column as follows.
https://www.tutorialspoint.com/word/word_quick_guide.htm 132/194
5/1/2021 Word - Quick Guide - Tutorialspoint

If you click the Insert Right button, it will add a column just next to the selected column.

Delete a Column
Following are the simple steps to delete columns from a table of a word document.

Step 1 − Click a column which you want to delete from the table and then click the Layout tab;
it will show the following screen.

https://www.tutorialspoint.com/word/word_quick_guide.htm 133/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the Layout tab, and click the Delete Column option under the Delete Table
Button to delete the selected column.

Move a Table in Word 2010

In this chapter, we will discuss how to move a table in Word 2010. Microsoft Word allows to
move a table from one location to another location along with its content. This chapter will give
you simple steps to move a table within the same document, though you can move a table from
one document to another document using the cut and paste operation.

Move a Table
The following steps will help you move a table within the same Word document.
Step 1 − Bring your mouse pointer over the table which you want to move from one location to
another location. As soon as you bring your mouse pointer inside the table, a small Cross Icon
will appear at the top-left corner of the table as shown below.

https://www.tutorialspoint.com/word/word_quick_guide.htm 134/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click over the small Cross Icon which will select the whole table. Once the table is
selected, use the Cut button or simply press the Ctrl + X keys to cut the table from its original
location.
Step 3 − Bring your insertion point at the location where you want to move the table and use
Paste button or simply press Ctrl + V keys to paste the table at the new location.

https://www.tutorialspoint.com/word/word_quick_guide.htm 135/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Resize a Table in Word 2010

In this chapter, we will discuss how to resize a table in Word 2010. Microsoft Word allows to
resize a table to make it smaller and bigger as per your requirement.

Resize a Table
The following steps will help you resize a table available in a Word document.

Step 1 − Bring your mouse pointer over the table which you want to resize. As soon as you
bring your mouse pointer inside the table, a small Cross Icon will appear at the top-left corner
and a small Resize Icon will appear at the bottom-right corner of the table as shown below.

Step 2 − Bring the mouse pointer over the Resize Icon till it changes to a diagonal doublesided
arrow and this is the time when you need to press the left mouse button and keep holding the
button while resizing the table. Drag the table up to make it shorter or down to make it larger.
You can drag the table diagonally to simultaneously change both the width and the height of the
table.

https://www.tutorialspoint.com/word/word_quick_guide.htm 136/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Merging Cells in Word 2010

In this chapter, we will discuss how to merge table cells in Word 2010. Microsoft Word allows
the merging of two or more cells to create one large cell. You will frequently need to merge
columns of the top row to create the title of the table. You can merge cells either row-wise or
column-wise, rather you cannot merge cells diagonally. This chapter will teach you how to
merge multiple rows or columns.

Merging Cells
The following steps will help you merge table cells in a Word document.

Step 1 − Bring your mouse pointer position inside the first cell that you want to merge. Now
press the Shift key and click the cells around the cell which you want to merge into the first cell.
This will highlight the cells which you click and they will be ready to be merged.

https://www.tutorialspoint.com/word/word_quick_guide.htm 137/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Now click the Layout tab and then click the Merge Cells button which will merge all
the selected cells.

After merging the cells, all the content of the cells will be scrambled which you can fix later as
you like. For example, you can convert the merged cells text into title or some other description.
For example, let us have center-aligned and bigger font text as follows on top of the table.

Split a Table in Word 2010

https://www.tutorialspoint.com/word/word_quick_guide.htm 138/194
5/1/2021 Word - Quick Guide - Tutorialspoint

In this chapter, let us discuss how to split a table in Word 2010. Microsoft Word allows splitting a
table into multiple tables but a single operation will always divide a table into two tables. This
chapter will teach you how to split a table into two smaller tables.

Split a Table
Following are the simple steps to split a table into two tables in a Word document.
Step 1 − Bring your mouse pointer position anywhere in the row that should appear as the first
row of the new table.

Step 2 − Now click the Layout tab and then click the Split Table button which will split the table
into two tables and the selected row will become the first row of the lower table.

https://www.tutorialspoint.com/word/word_quick_guide.htm 139/194
5/1/2021 Word - Quick Guide - Tutorialspoint

After splitting the table into two tables, you can further divide it into two parts and you can
continue dividing the Word tables as long as a table has more than one row.

Split Cells in Word 2010

In this chapter, we will discuss how to split table cells in Word 2010. Microsoft Word allows
splitting a cell into multiple cells. We will understand how to split a cell into multiple smaller sub-
cells.

https://www.tutorialspoint.com/word/word_quick_guide.htm 140/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Split a Cell
The following steps will help you split a cell into two sub-cells of a table available in word
document.

Step 1 − Bring your mouse pointer position inside the cell that has to be divided into multiple
cells.

Step 2 − Now click the Layout tab and then click the Split Cells button; this will display a
dialog box asking for the number of rows and columns to be created from the selected cell.

https://www.tutorialspoint.com/word/word_quick_guide.htm 141/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select the desired number of rows and columns that have to go into the resultant cell
and finally click the OK button to apply the result.

You can divide a cell into multiple cells either row-wise or column-wise or both.

Add Formula in Word 2010

In this chapter, we will discuss how to add formula to a table in Word 2010. Microsoft Word
allows you to use mathematical formula in table cells which can be used to add numbers, to find
the average of numbers, or find the largest or the smallest number in table cells you specify.
There is a list of formulae, you can choose from the many based on the requirement. This
chapter will teach you how to use formula in word tables.

Add a Formula

Following are the simple steps to add formula in a table cell available in Word document.
Step 1 − Consider the following table with the total number of rows. Click in a cell that should
contain the sum of the rows.

https://www.tutorialspoint.com/word/word_quick_guide.htm 142/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Now click the Layout tab and then click the Formula button; this will display a
Formula Dialog Box which will suggest a default formula, which is =SUM(LEFT) in our case.
You can select a number format using Number Format List Box to display the result or you can
change the formula using the Formula List Box.

Step 3 − Now click OK to apply the formula and you will see that the left cells have been added
and the sum has been put in the total cell where we wanted to have it. You can repeat the
procedure to have the sum of other two rows as well.

https://www.tutorialspoint.com/word/word_quick_guide.htm 143/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Cell Formulae
The Formula dialog box provides the following important functions to be used as formula in a
cell.

S.No Formula & Description

AVERAGE( )
1
The average of a list of cells

COUNT( )
2
The number of items in a list of cells

MAX( )
3
The largest value in a list of cells

MIN( )
4
The smallest value in a list of cells

PRODUCT( )
5
The multiplication of a list of cells

SUM( )
6
The sum of a list of cells

https://www.tutorialspoint.com/word/word_quick_guide.htm 144/194
5/1/2021 Word - Quick Guide - Tutorialspoint

We assume you are familiar with how to create a spreadsheet program; you can construct your
word cell formula. Word formulae uses a reference system to refer to an individual table cells.
Each column is identified by a letter, starting with A for the first column, B for the second
column, and so on. After the letter comes the row number. Thus, the first cell in the first row is
A1, the third cell in the fourth row is C4, and so on.

Following are useful points to help you in constructing a word cell formula.

S.No Cell References and Description

1 A single cell reference, such as B3 or F7

2 A range of cells, such as A4:A9 or C5:C13

3 A series of individual cells, such as A3, B4, C5

4 ABOVE, referring to all cells in the column above the current cell.

5 BELOW, referring to all cells in the column below the current cell.

6 LEFT, referring to all cells in the row to the left of the current cell

7 RIGHT, referring to all cells in the row to the right of the current cell

You can also construct simple Math expressions, such as B3+B5*10 by using simple
mathematical operators +, -, /, *, %.

Borders & Shades in Word 2010

In this chapter, we will discuss how to apply table borders and shades in Word 2010. Microsoft
Word allows you to place a border on any or all of the four sides of a table very similar to text,
paragraphs, and pages. You can also add shades to table rows and columns. This chapter will
teach you how to add borders (left, right, top or bottom) around a table and how to add different
shades to various rows and columns of the table.

Add Borders to Table

The following steps will help you add borders in a table cell available in Word document.
Step 1 − Select the table to which you want to add border. To select a table, click over the table
anywhere which will make the Cross icon visible at the top-left corner of the table. Click this
cross icon to select the table.
Step 2 − Click the Border button to display a list of options to put a border around the selected
table. You can select any of the option available by simply clicking over it.

https://www.tutorialspoint.com/word/word_quick_guide.htm 145/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Try to add and remove different borders like left, right, top or bottom by selecting
different options from the border options.

Step 4 − You can apply border to any of the selected row or column. You can try it yourself.
Step 5 − To delete the existing border, simply select the No Border option from the border
options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 146/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Using Border Options

You can add borders of your choice to word table by following the simple steps given below.

Step 1 − Click the Border button to display a list of options to put a border. Select the Border
and Shading option available at the bottom of the list of options as shown in the above
screenshot. This will display a Border and Shading dialog box. This dialog box can be used to
set borders and shading around a selected table.

Step 2 − Click the Border tab; this will display a list of border settings, styles and options
whether this border should be applied to the table or text or paragraph.

Step 3 − You can use the Preview section to disable or enable left, right, top or bottom borders
of the selected table or row or column. Follow the given instructions in the preview section itself
to design the border you like.
Step 4 − You can customize your border by setting its color, width by using different width
thickness available under the style section.

https://www.tutorialspoint.com/word/word_quick_guide.htm 147/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Add Shades To Table

The following steps will help you add shades on a selected table or its rows or columns.

Step 1 − Select a row or column where you want to apply a shade of your choice.

Step 2 − Click the Border button to display a list of options to put a border. Select the Border
and Shading option available at the bottom of the list of options. This will display a Border and
Shading dialog box. This dialog box can be used to set borders and shading around selected
row(s) or column(s).

https://www.tutorialspoint.com/word/word_quick_guide.htm 148/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the Shading tab which will display options to select fill, color and style and
whether this border should be applied to cell or table or selected portion of text.
Step 3 − You can use the Preview section to have an idea about the expected result. Once you
are done, click the OK button to apply the result.

Quick Styles in Word 2010

In this chapter, we will discuss how to apply quick styles in Word 2010. Microsoft Word provides
a gallery of Quick Styles that you can apply to headings, titles, text, and lists. Quick styles come
with canned formatting choices, such as font, boldface, and color which we will understand in
this chapter.

Apply Quick Styles

The following steps will help you understand how to apply quick styles to a selected portion of
text.

Step 1 − Select a portion of text to which you want to apply some style. Using style, you can
change the selected portion of text as a heading or subheading or title of the document. You can
try using different styles on your text based on your requirement.
Step 2 − Click the Home tab and then move your mouse pointer over the available styles in the
Style Gallery. You will see that the selected portion of text will change its style based on the
selected style. You can display more available styles by clicking the More Style button.

https://www.tutorialspoint.com/word/word_quick_guide.htm 149/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Finally, to apply a selected style, click over the style and you will find that it is has been
applied on the selected portion of text.

You can bring a text to its normal appearance by selecting the Normal style available in the
Style Gallery.

Change Styles

https://www.tutorialspoint.com/word/word_quick_guide.htm 150/194
5/1/2021 Word - Quick Guide - Tutorialspoint

The Change Style function allows you to change the default font, color, paragraph spacing and
style set for a document. The following steps will help you change the default style.

Step 1 − Open the document the style of which needs to be changed. Click the Home tab and
then click the Change Styles button; this will show you all the options that can be changed. You
can change the Style, the Font, the Color and the Spacing of the paragraph.

Step 2 − If the style set needs to be changed, click the Style Set option; this will display a
submenu to select any of the available style set. When you move your mouse over the different
style sets, you will get real time text preview to give an idea about the final result.

https://www.tutorialspoint.com/word/word_quick_guide.htm 151/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − To apply a selected style set, click over the style set and you will find that it is has been
applied on your document.

Similarly, you can try applying Font, Color and Paragraph Spacing. You can try these options
yourself.

Use Templates in Word 2010

In this chapter, we will discuss how to use templates in Word 2010. Microsoft Word template is a
collection of styles which defines paragraph styles for regular text paragraphs, a title, and
different levels of headings. You can use any of the already existing templates for your Word
document or you can design a template which can be used for all your company documents.

Using Existing Template

We will now understand how to use an already existing template for your newly created word
document. A template is selected at the time when you create a new blank document.
Step 1 − To start a new document, click the File tab and then click the New option; this will
display the Available Templates.

https://www.tutorialspoint.com/word/word_quick_guide.htm 152/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Microsoft Word provides a list of templates arranged under Sample Templates or you
can download hundreds of templates from office.com which are arranged in different
categories. We will use Sample Templates for our document. For this, we need to click over
Sample Templates; this will display a gallery of templates. You can try using the office.com
option to select a template based on your requirement.

Step 3 − You can browse a list of available templates and finally select one of them for your
document by double-clicking over the template. We will select Equity Report template for our
report requirement. While selecting a template for your document, you should select the
Document Option available in the third column. This opens your document with predefined

https://www.tutorialspoint.com/word/word_quick_guide.htm 153/194
5/1/2021 Word - Quick Guide - Tutorialspoint

setting with which you can modify document title, author name, heading, etc. based on your
document requirement.

Create New Template

You can create a fresh new template based on your requirement or you can modify an existing
template and save it for later use as a template. A Microsoft Word template file has an extension
of .dotx. The following steps will help you create a new template.
Step 1 − To create a new template using an existing template, click the File tab and then click
the New option; this will display the Available Templates to be selected. Select any of the
available template and open it with the Template Option turned on.

https://www.tutorialspoint.com/word/word_quick_guide.htm 154/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − You can now modify an open template as per your requirements and once you are
done, you can save this template with a .dotx extension which is a standard extension for
Microsoft Word Templates.

You can create a template from a new document as well. Click the File button, and click New
option to open a new document. Under Available Templates, double click Blank Document to
create a new document template. Save the template with a unique name and .dotx extension.

https://www.tutorialspoint.com/word/word_quick_guide.htm 155/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can save the created template anywhere you click and whenever you like to use this
template, just double-click over the template file and it will open a new template based
document for you.

Use Graphics in Word 2010

In this chapter, we will discuss how to use graphics in Word 2010. You can add beauty to your
Microsoft Word documents by inserting a variety of graphics. This chapter will teach you two
ways of adding graphics.

Adding Picture in Document

The following steps will help you add an existing picture in your word document. It is assumed
that you already have a picture available on your machine before you add this picture in your
Word document.
Step 1 − Click on your document where you want to add a picture.

Step 2 − Click the Insert tab and then click the Picture option available in illustrations group,
which will display the Insert Picture dialog box.

Step 3 − You can select a required picture using the Insert Picture dialog box. When you will
click the Insert button, selected picture will be inserted in your document. You can play with
your inserted picture in different ways, like you can apply quick styles to your picture, you can

https://www.tutorialspoint.com/word/word_quick_guide.htm 156/194
5/1/2021 Word - Quick Guide - Tutorialspoint

resize it, or you can change its color too. To try it, just -lick your inserted image and Word will
give you numerous options available under the Format tab to format your inserted graphics.

You can try yourself to insert other available graphics like Clipart, Different Shapes, Charts and
SmartArt or Screenshots.

Adding WordArt in Document

WordArt provides a way to add fancy words in your Word document. You can document your
text in a variety of ways. The following steps will help you add WordArt in your document.
Step 1 − Click in your document where you want to add WordArt.
Step 2 − Click the Insert tab and then click the WordArt option available in the Text group; this
will display a gallery of WordArt.

https://www.tutorialspoint.com/word/word_quick_guide.htm 157/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − You can select any of the WordArt style from the displayed gallery by clicking on it.
Now you can modify the inserted text as per your requirement and you can make it further
beautiful by using different options available. To try it, just double-click your inserted WordArt
and Word will give you numerous options available from the Format tab to format your image.
Most frequently used options are Shape Styles and WordArt Styles.

https://www.tutorialspoint.com/word/word_quick_guide.htm 158/194
5/1/2021 Word - Quick Guide - Tutorialspoint

You can try yourself to apply different options on the inserted WordArt by changing its shape
styles, colors, WordArt Styles, etc.

Auto Correction in Word 2010

In this chapter, we will discuss auto correction in Word 2010. The AutoCorrect feature
automatically corrects common typographical errors when you make them. Let us learn how to
use the auto correction option available in Microsoft Word 2010 to correct the spelling
automatically as you type the words in your documents.

Setting AutoCorrect
The following steps will help to enable the AutoCorrect feature in Microsoft Word.
Step 1 − Click the File tab, click Options, and then click the Proofing option available in the
left most column, it will display the Word Options dialog box.

Step 2 − Click the AutoCorrect Options button which will display the AutoCorrect dialog box
and then click the AutoCorrect tab. Now you have to make sure all the options are enabled,
especially the Replace Text as you type option. It is also recommended to be careful when you
turn off an option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 159/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select from among the following options, depending on your preferences.

https://www.tutorialspoint.com/word/word_quick_guide.htm 160/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Option and Description

Show AutoCorrect Options Buttons

1 This option will be used to display a small blue button or bar beneath text that was
automatically corrected. Click this button to see a menu, where you can undo the
correction or set AutoCorrect options.

Correct TWo INitial CApitals

2
This option changes the second letter in a pair of capital letters to lowercase.

Capitalize first letter of sentences

3
This option capitalizes the first letter following the end of a sentence.

Capitalize first letter of table cells

4
This option will be used to capitalize the first letter of a word in a table cell.

Capitalize names of days

5
This option will be used to capitalize the names of the days of the week.

Correct accidental usage of cAPS LOCK key

6 This option will be used to correct capitalization errors that occur when you type with
the CAPS LOCK key depressed and turns off this key.

Replace text as you type

7 This option replaces typographical errors with the correct words as shown in the list
beneath it.

Automatically use suggestions from the spelling checker

8 This option tells Word to replace spelling errors with words from the dictionary as you
type.

Although Word comes preconfigured with hundreds of AutoCorrect entries, you can also
manually add entries using the following dialog box and use the Replace and With text boxes to
add more entries. I added an entry for Markiting which should be replaced with Marketing. You
can use the Add button to add multiple entries.
Step 4 − Click OK to close the AutoCorrect Options dialog box and again click OK to close the
Word Options dialog box. Now try to type Markiting and as soon as you type this word,
Microsoft Word autocorrects it with the correct word Marketing word.
https://www.tutorialspoint.com/word/word_quick_guide.htm 161/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Auto Formatting in Word 2010

In this chapter, we will discuss auto formatting in Word 2010. The AutoFormat feature
automatically formats a document as you type it by applying the associated styles to text. Let us
learn how to use the auto format option available in Microsoft Word 2010 to format the typed
content. For example, if you type three dashes --- and press enter, Word will automatically
create a line for you. Similarly, Word will automatically format two dashes - into an em dash (—).

Setting AutoFormat
The following steps will help you set the AutoFormat feature in your Microsoft Word.

Step 1 − Click the File tab, click Options, and then click the Proofing option available in the
left most column, it will display the Word Options dialog box.

Step 2 − Click the AutoCrrect Options button; this will display the AutoCorrect dialog box and
then click the AutoFormat As You Type tab to determine what items Word will automatically
format for you as you type.

https://www.tutorialspoint.com/word/word_quick_guide.htm 162/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select from among the following options, depending on your preferences.

https://www.tutorialspoint.com/word/word_quick_guide.htm 163/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Option and Description

"Straight quotes" with “smart quotes”

1 This option will be used to replace the plain quotation characters with curly quotation
characters.

Fractions (1/2) with fraction character (½)

2 This option will be used to replace the fractions typed with numbers and slashes with
fraction characters.

*Bold* and _italic_ with real formatting

3 This option will be used to format text enclosed within asterisks (*) as bold and text
enclosed within underscores ( _ ) as italic.

Internet and network paths with hyperlinks

4 This option will be used to format e-mail addresses and URLs as clickable hyperlink
fields.

Ordinals (1st) with superscript

5 This option will be used to format ordinal numbers with a superscript like 1st becomes
1st.

Hyphens (--) with dash (—)

6 This option will be used to replace a single hyphen with an en dash (.) and two
hyphens with an em dash (—).

Automatic bulleted lists

7 This option will be used to apply bulleted list formatting to paragraphs beginning with
*, o, or - followed by a space or tab character.

Automatic numbered lists

8 This option will be used to apply numbered list formatting to paragraphs beginning
with a number or letter followed by a space or a tab character.

Border lines
9 This option will be used to apply paragraph border styles when you type three or more
hyphens, underscores, or equal signs (=).

https://www.tutorialspoint.com/word/word_quick_guide.htm 164/194
5/1/2021 Word - Quick Guide - Tutorialspoint

10 Tables

This option will be used to create a table when you type a series of hyphens with plus
signs to indicate the column edges. Try with +-----+------+ ) and then press Enter.

Built-in heading styles

11
This option will be used to apply heading styles to heading text.

Format beginning of list item like the one before it

12 This option will be used to replace plain quotation characters with curly quotation
characters.

Set left- and first-indent with tabs and backspaces

13 This option sets left indentation on the tab ruler based on the tabs and backspaces
you type.

Define styles based on your formatting

14 This option automatically creates or modifies styles based on manual formatting that
you apply to your document.

Step 4 − Finally click OK to close the AutoCorrect Options dialog box and again click OK to
close the Word Options dialog box.

Table of Contents in Word 2010

In this chapter, we will discuss how to create table of contents in Word 2010. A table of contents
(or TOC) is a list of headings in the order in which they appear in the document. You can set a
list of headings which should be a part of the table of contents. Let us learn how to create a
Table of Contents. A table of content helps in navigating through a Word document by providing
associated page numbers and direct links to various headings available on those pages.

Create Table of Contents

The following will help you to create Table of Contents in your Microsoft Word using various
levels of headings.
Step 1 − Consider a document having different levels of headings.

https://www.tutorialspoint.com/word/word_quick_guide.htm 165/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − You can insert a table of content anywhere in the document, but the best place is
always at the beginning of the document. So bring your insertion point at the beginning of the
document and then click the References tab followed by the Table of Content button; this will
display a list of Table of Contents options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 166/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select any of the displayed options by simply clicking on it. A table of content will be
inserted at the selected location.

Step 4 − You can select number of levels of headings in your table of content. If you click on the
Insert Table of Content option available in the option menu, then it will show you a dialog box
where you can select the number of levels you want to have in your table of content. You can
turn ON or turn OFF the Show Page Numbers option. Once done, click the OK button to apply
the options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 167/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Now if you press the Ctrl key and then click over the any link available in the table of content, it
will take you directly to the associated page.

Update Table of Contents

When you work on a Word document, then number of pages and their content keep varying and
accordingly you need to update your Table of Contents. Following are the simple steps to
update an existing Table of Contents in your Microsoft Word.
Step 1 − Consider you already have a table of content as shown above. Click the References
tab followed by the Update Table button; this will display the Update Table of Contents dialog
box with two options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 168/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − If you want to update just the page numbers then select the first option Update page
numbers only available in the dialog box but if you want to update page numbers as well, then
select the second option Update entire table and you will find your table of content updated
with all the latest changes.

Delete Table of Contents

The following steps will help you delete an existing Table of Contents from Microsoft Word.
Step 1 − Consider you already have a table of content as shown above. Click the References
tab and next Table of Contents button which will display a list of Table of Contents options
along with Remove Table of Contents option available at the bottom.

https://www.tutorialspoint.com/word/word_quick_guide.htm 169/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click over the Remove Table of Contents option to delete the existing table of
contents.

Preview Documents in Word 2010

In this chapter, we will discuss the preview of documents in Word 2010. When you are ready for
printing your Word document, it is always recommended to preview the document before you
send the document for final printing. During preview of the document you might discover that the
set margin is not appropriate or many items may not look good after printing so better to fix
them after having a preview of the document. You can also have the option to specify which
pages to print, select a printer, specify the paper size on which you want to print, and set the
other printing options.

Preview Documents

The following steps will help you preview your Microsoft Word Document.
Step 1 − Open the document the preview of which you want to see.

https://www.tutorialspoint.com/word/word_quick_guide.htm 170/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Click the File tab followed by the Print option; this will display a preview of the
document in the right column. You can scroll up or scroll down your document to walk through
the document using the given Scrollbar. In the next chapter, we will learn how to print the
previewed document and how to set different printing options.

Step 3 − Once you are done with your preview, you can click the Home tab to go to the actual
content of the document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 171/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Printing Documents in Word 2010

In this chapter, we will discuss how to print documents in Word 2010. Consider you are done
with previewing and proofing your document and ready for the final printing. This chapter will
teach you how to print a part or a complete Microsoft Word document.

Printing Documents

The following steps will help you print your Microsoft Word document.
Step 1 − Open the document for which you want to see the preview. Next click the File tab
followed by the Print option which will display a preview of the document in the right column.
You can scroll up or scroll down your document to walk through the document using given
Scrollbar. The middle column gives various options to be set before you send your document to
the printer.

Step 2 − You can set various other printing options available. Select from among the following
options, depending on your preferences.

https://www.tutorialspoint.com/word/word_quick_guide.htm 172/194
5/1/2021 Word - Quick Guide - Tutorialspoint

https://www.tutorialspoint.com/word/word_quick_guide.htm 173/194
5/1/2021 Word - Quick Guide - Tutorialspoint

S.No Option and Description

Copies
1 Set the number of copies to be printed; by default, you will have one copy of the
document.

Print Custom Range

2 This option will be used to print a particular page of the document. Type the number in
Pages option, if you want to print all the pages from 7 till 10 then you would have to
specify this option as 7-10 and Word will print only 7th, 8th, 9th and 10th pages.

Print One Sided

3 By default, you print one side of the page. There is one more option where you will
turn up your page manually in case you want to print your page on both sides of the
page.

Collated
4 By default, multiple copies will print Collated; if you are printing multiple copies and
you want the copies uncollated, select the Uncollated option.

Orientation
5 By default, page orientation is set to Portrait; if you are printing your document in
landscape mode then select the Landscape mode.

A4
6 By default, the page size is A4, but you can select other page sizes available in the
dropdown list.

Custom Margin

7 Click the Custom Margins dropdown list to choose the document margins you want
to use. For instance, if you want to print fewer pages, you can create narrower
margins; to print with more white space, create wider margins.

1 Page Per Sheet

8 By default, the number of pages per sheet is 1 but you can print multiple pages on a
single sheet. Select any option you like from the given dropdown list by clicking over
the 1 Page Per Sheet option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 174/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Once you are done with your setting, click on the Print button which will send your
document to the printer for final printing.

Email Documents using Word 2010

In this chapter, we will discuss how to email documents using Word 2010. Microsoft Word can
be used to send a Word document in an email as an attachment directly at the given email
address without opening your email program. This chapter will teach you simple ways of
sending email in a variety of formats, including a Word document file (DOC) attachment or a
PDF, among others.

Mailing Documents
Following are the simple steps to send a word document as an attachment at the given email
address.
Step 1 − Open the document you want to send using e-mail as an attachment.
Step 2 − Click the File tab and then click the Save & Send option from the left most column;
this will display a number of options to Save & Send, you will have to select the Send using
Email option available in the middle column.

https://www.tutorialspoint.com/word/word_quick_guide.htm 175/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − The third column will have various options to send email which allows you to send your
document as an attachment in DOC format or you can send your Word document in a PDF
format. Click a method to send the document. I'm going to send my document in PDF format.
When you click the Send as PDF option, it displays the following screen where you can type the
email address to which you want to send your document, email subject and other additional
messages as well. To send email to multiple recipients, separate each e-mail address with a
semicolon (;) and a space.

Translate Word 2010 Document

In this chapter, we will discuss how to translate a Word 2010 document. Microsoft Word has an
option to translate a complete Word document from one language to another language using
simple step. Let us learn how we can translate document content from English to some other
language (Spanish).

Translate Document Using Microsoft Translator

The following steps will help you translate a document from one language to another language.
Step 1 − Click the Review tab and then click the Translate button; this will display different
options to be selected.

https://www.tutorialspoint.com/word/word_quick_guide.htm 176/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 2 − Select the Choose Translation Language option simply by clicking over it. This will
display a Translation Language Options dialog box asking for selecting from and to
languages. Here From is the source document's language and To is the target document’s
language.

https://www.tutorialspoint.com/word/word_quick_guide.htm 177/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − After selecting From Language and To Language, click OK. Now again go to Review
tab and then click Translate button which will display different options to be selected. Select top
option Translate Document option from the given options, this will display Translate Whole
Document dialog box asking for your permission to send your document over the internet to be
translated by Microsoft Translator.

Step 4 − To translate your document, you can click the Send button. This will send your
document over the internet to be translated and you will have your document translated in your
target language.

Step 5 − Now you can copy your translated content manually in any other document and save it
for final use.

Compare Documents in Word 2010

https://www.tutorialspoint.com/word/word_quick_guide.htm 178/194
5/1/2021 Word - Quick Guide - Tutorialspoint

In this chapter, we will discuss how to compare documents in Word 2010. Sometime you modify
a Microsoft Word document without turning on the Track Changes mode; in such cases, tracking
the changes becomes difficult and you will have to compare the original document with the
modified document word by word. But you do not need to compare it manually, Microsoft Word
provides an option to compare two documents very easily. Let us see how it can be done.

Compare Two Documents

Let us have the following two documents, (a) Original document (b) Modified version of the
same document as follows

Original Document

Modified Document

https://www.tutorialspoint.com/word/word_quick_guide.htm 179/194
5/1/2021 Word - Quick Guide - Tutorialspoint

The following steps will help you compare the two documents.

Step 1 − Click the Review tab and then click the Compare button. This will display the two
options to be selected.

Step 2 − Select the Compare option simply by clicking over it. This will display a Compare
Documents dialog box asking for the two versions of the Word document that need to be
compared with each other.

https://www.tutorialspoint.com/word/word_quick_guide.htm 180/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select the Original Document and the Revised Document and click the OK button to
display the differences in two documents. Left column on the screen would show all the
changes done over the course of changes and you will see original as well as modified version
of the document on the same screen. You can walk through these changes using the Previous
& Next button available under the Review tab.

NOTE − While comparing two documents you can use the different settings available at the
Compare Documents dialog box under the More button.

https://www.tutorialspoint.com/word/word_quick_guide.htm 181/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Document Security in Word 2010

Microsoft Word provides a high level of security for your word generated documents. You can
set a password for a document to stop unauthorized reading and editing of the document or if
you want someone just to read the document then you can set editing restriction on your word
document. This chapter will teach you how to make your document password protected and
restricted from editing and formatting.

Set Document Password

Once you set a password for a document then you will be able to open the document only if you
know the password. If you forget your password, then there is no way to recover it and to open
the document. So you need to be careful while setting a password for your important document.

The following steps will help you set a password for a Word document.
Step 1 − Open a Word document for which you want to set a password.

Step 2 − Click the File tab and then click the Info option and finally the Protect Document
button which will display a list of options to be selected.

Step 3 − Select the Encrypt with Password option simply by clicking over it. This will display
an Encrypt Document dialog box asking for a password to encrypt the document. The same
dialog box will appear twice to enter the same password. After entering password each time,
click the OK button.

https://www.tutorialspoint.com/word/word_quick_guide.htm 182/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 4 − Save the changes, and finally you will have your document password protected. Next
time when someone tries to open this document, it will ask for the password before displaying
the document content, which confirms that now your document is password protected and you
need password to open the document.

Remove Document Password

You can remove a document password only after opening it successfully. The following steps
will help you remove password protection from your Word document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 183/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 1 − Open a Word document the password of which needs to be removed. You will need
the correct password to open the document.

Step 2 − Click the File tab followed by the Info option and finally the Protect Document button
which will display a list of options to be selected.

Step 3 − Select the Encrypt with Password option simply by clicking over it. This will display
an Encrypt Document dialog box and password which will be in a dotted pattern. You need to
remove this dotted pattern from the box and make it clear to remove the password from the
document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 184/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Now when you will open your document next time, Word will not ask you for any password
because you have removed the password protection from the document.

Set Editing & Formatting Restrictions

The following steps will help you set editing restrictions in a Word document.
Step 1 − Open a Word document for which you want to set editing restrictions.
Step 2 − Click the File tab and then click the Info option and finally the Protect Document
button which will display a list of options to be selected.

https://www.tutorialspoint.com/word/word_quick_guide.htm 185/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select the Restrict Editing option simply by clicking over it. This will open the actual
document and it will also give you the option to set editing restrictions in the Restrict
Formatting and Editing area. Here you can set formatting as well as editing restrictions on the
document.

Step 4 − One you are done with your setting, click the Yes, Start Enforcing Protection button
which will display a Start Enforcing Protection dialog box asking for password so that no one
https://www.tutorialspoint.com/word/word_quick_guide.htm 186/194
5/1/2021 Word - Quick Guide - Tutorialspoint

else can change the setting. You can enter the password or you can leave it simply blank which
means there is no password setting for this protection.

Step 5 − Finally click the OK button and you will find that your document is editing (or formatting
if you applied) protected.

Remove Editing & Formatting Restrictions

You can remove the editing restriction from your document using these simple steps.
Step 1 − Open a Word document for which you want to remove the editing restriction.
Step 2 − Click the File tab and then click the Info option and finally the Protect Document
button; this will display a list of options to be selected.

https://www.tutorialspoint.com/word/word_quick_guide.htm 187/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Select the Restrict Editing option simply by clicking over it. This will display the
Restrict Formatting and Editing area as follows.

Step 4 − Now click the Stop Protection button. If you had set up a password at the time of
setting the editing or formatting restrictions, then you will need the same password to remove
the editing or formatting restrictions. Word will now ask for the same using the Unprotect
Document Dialog box , otherwise it will simply remove the restrictions.

https://www.tutorialspoint.com/word/word_quick_guide.htm 188/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Set Watermark in Word 2010

In this chapter, we will discuss how to set watermark in a Word document. A watermark is a
picture that shows up faintly behind the text on a Word document page. When you draft a
document, you can watermark the document with Draft Copy stamp, or you can watermark a
duplicate document with the Duplicate stamp. Microsoft Word allows you to stamp with
watermark using simple steps explained in this chapter.

Set Standard Watermark

The following steps will help you set standard watermark in word document. A standard
watermark is the one which is already defined by words and cannot modify their font or color
etc.
Step 1 − Open a word document in which you want to add a watermark.
Step 2 − Click the Page Layout tab and then click the Watermark button to display a list of
standard watermark options.

https://www.tutorialspoint.com/word/word_quick_guide.htm 189/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − You can select any of the available standard watermarks by simply clicking over it.
This will be applied to all the pages of the word. Assume we select the Confidential watermark.

https://www.tutorialspoint.com/word/word_quick_guide.htm 190/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Set Custom Watermark

The following steps will help you set custom watermark in word document. A custom watermark
is the one which can be modified text and its font, color and size etc.
Step 1 − Open a Word document in which you want to add a watermark.
Step 2 − Click the Page Layout tab and then click the Watermark button to display a list of
standard watermark options. At the bottom, you will find the Custom Watermark option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 191/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Click over the Custom Watermark option; this will display the Printed Watermark
dialog box.

https://www.tutorialspoint.com/word/word_quick_guide.htm 192/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 4 − Now you can set a picture as watermark or you can set predefined text as watermark;
you can also type your text in the Text box available at Printed Watermark dialog box. We will
set text watermark as DUPLICATE and also set its font color and font size. Once all the
parameters are set, click the OK button to set the parameters.

Remove Watermark
The following steps will help you remove an existing watermark from a Word document.
Step 1 − Open a Word document the watermark of which needs to be deleted.
Step 2 − Click the Page Layout tab followed by the Watermark button to display a list of
standard watermark options. At the bottom, you will find the Remove Watermark option.

https://www.tutorialspoint.com/word/word_quick_guide.htm 193/194
5/1/2021 Word - Quick Guide - Tutorialspoint

Step 3 − Click Remove Watermark option; this will delete the existing watermark from the
document.

https://www.tutorialspoint.com/word/word_quick_guide.htm 194/194