Generator Set Data Sheet: 312.5 kVA Standby

Model: C250 D6
Frequency: 60
Fuel Type: Diesel
» Generator set data sheet

312.5 kVA Standby
Our energy working for you.™
Spec sheet: SS8-CPGK

Noise data sheet (Open/enclosed): ND50-OS550 / ND50-CS550
Airflow data sheet: AF50-550
Derate data sheet (Open/enclosed): DD50-OS550 / DD50-CS550
Transient data sheet: TD50-550
Standby Prime
Fuel consumption Kw (kVA) Kw (kVA)
Ratings 250 (312.5) 225 (281.3)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full
US gph 5.1 8.6 12.2 16.3 3.7 6.8 10.1 13.7
L/hr 23 39 56 74 17 31 46 63
Engine Standby rating Prime rating

Engine manufacturer Cummins
Engine model QSL9 G5
Configuration 4 Cycle; In-line; 6 Cylinder Diesel
Aspiration Turbo Charged and Charge Air Cooled
Gross engine power output, kWm 355 307
BMEP at set rated load, kPa 2668 2309
Bore, mm 114
Stroke, mm 145
Rated speed, rpm 1800
Piston speed, m/s 8.7
Compression ratio 16.8:1
Lube oil capacity, L 26.5
Overspeed limit, rpm 2100 ±50
Regenerative power, kW 47
Governor type Electronic
Starting voltage 24 Volts DC
Fuel flow
Maximum fuel flow, L/hr 165
Maximum fuel inlet restriction, mm Hg 203
Maximum fuel inlet temperature (°C) 70
Air
Combustion air, m3/min 24.7 23.3
Maximum air cleaner restriction, kPa 6.2
©2007 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation
and Cummins are registered trademarks of Cummins Inc. PowerCommand and “Our energy working for you.” are trademarks of Cummins
Power Generation. Other company, product, or service names may be trademarks or service marks of others.
Exhaust Standby rating Prime rating
Exhaust gas flow at set rated load, m3/min 65.2 56.1
Exhaust gas temperature, °C 580 500
Maximum exhaust back pressure, kPa 10.2
Standard set-mounted radiator cooling

Ambient design, °C 50
Fan load, KWm 11
Coolant capacity (with radiator), L 15
Cooling system air flow, m3/min @ 12.7mmH2O 9.47
Total heat rejection, BTU/min 12240 10190
Maximum cooling air flow static restriction mmH2O 19.1
Open set derating factors kVA (kW)

Note: Standard open genset options running at 400V, 150m above sea level. For enclosed product derates, please refer to datasheet - DD50-
CS550.
27°C 40°C 45°C 50°C 55°C

Standby 312.5 (250) 312.5 (250) 303.1 (242.5) 293.8 (235) 284.4 (227.5)
Prime 281.3 (225) 281.3 (225) 275.6 (220.5) 267 (213.6) 258.5 (206.8)
Weights* Open Enclosed

Unit dry weight kgs 2518 4095
Unit wet weight kgs 2570 4734
* Weights represent a set with standard features. See outline drawing for weights of other configurations
Dimensions Length Width Height

Standard open set dimensions 3135 1100 1928
Enclosed set standard dimensions 4254 1424 2215
Genset outline
Open set
Enclosed set
Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.
Alternator data
Feature code Connection1 Temp rise degrees C Duty2 Alternator Voltage
B252 Wye, 3 Phase 125/105 S/P HC4D 416-480V
B683 Wye, 3 Phase 150/125C S/P UCD274K 440-480
Ratings definitions
Emergency Standby Power (ESP) Limited-Time running Power Prime Power (PRP): Base Load (Continuous) Power
Applicable for supplying power to Applicable for supplying power to a Applicable for supplying power to Applicable for supplying power
varying electrical load for the constant electrical load for limited varying electrical load for unlimited continuously to a constant electrical
duration of power interruption of a hours. Limited Time Running hours. Prime Power (PRP) is in load for unlimited hours.
reliable utility source. Emergency Power (LTP) is in accordance with accordance with ISO 8528. Ten Continuous Power (COP) in
Standby Power (ESP) is in ISO 8528. percent overload capability is accordance with ISO 8528, ISO
accordance with ISO 8528. Fuel available in accordance with ISO 3046, AS 2789, DIN 6271 and BS
Stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514.
3046, AS 2789, DIN 6271 and BS 5514.
5514.
Formulas for calculating full load currents:
Three phase output Single phase output
kWx1000 kWxSingleP haseFactor x1000

Voltagex1. 73x0.8 Voltage
See your distributor for more information.
Cummins Power Generation

Manston Park, Columbus Avenue
Manston, Ramsgate
Kent CT12 5BF, UK
Telephone: +44 (0) 1843 255000
Fax: +44 (0) 1843 255902
E-Mail: cpg.uk@cummins.com
Web: www.cumminspower.com

Generator Set Data Sheet: 312.5 kVA Standby

Uploaded by

Copyright:

Available Formats

Generator Set Data Sheet: 312.5 kVA Standby

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Generator Set Data Sheet: 312.5 kVA Standby

Uploaded by

Copyright:

Available Formats

Model: C250 D6

» Generator set data sheet

Our energy working for you.™

Spec sheet: SS8-CPGK

Engine Standby rating Prime rating

Standard set-mounted radiator cooling

Open set derating factors kVA (kW)

27°C 40°C 45°C 50°C 55°C

Weights* Open Enclosed

Dimensions Length Width Height

Formulas for calculating full load currents:

Three phase output Single phase output

kWx1000 kWxSingleP haseFactor x1000

See your distributor for more information.

Cummins Power Generation

You might also like